Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.0 LAccepted-AOC | L1 | Accepted-AOC Lowest BIdder | |
| 2 | L2₹34.9 L+₹95,602.30 (2.82%)Rejected-Finance 2645 SAYAROLI BAZAR NASIRABAD RAJ 305601 | NASIRABAD | AJMER | RAJASTHAN | 305601 | L2 | Rejected-Finance Other than Lowest | |
| 3 | L3₹36.6 L+₹2.7 L (7.83%)Rejected-Finance 20 A 2ND FLOOR BLOCK C RAJEEV NAGAR BEGUMPUR DELHI 110086 | NORTH WEST | DELHI | 110086 | L3 | Rejected-Finance Other than Lowest | |
| 4 | L4₹36.7 L+₹2.7 L (7.96%)Rejected-Finance 2788 FOURTH FLOOR GALI RAJPUTANA ARYA PURA SABZI MANDI NEW DELHI KAMLA NAGAR NORTH DELHI DELHI 110007 UDYAM DL 01 0057966 | NORTH DELHI | DELHI | 110007 | L4 | Rejected-Finance Other than Lowest | |
| 5 | L5₹36.7 L+₹2.8 L (8.20%)Rejected-Finance | L5 | Rejected-Finance Other than Lowest |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
8 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NASIRABAD
GE NASIRABAD 305601 (RAJ)
SPL REPAIR OF 02 X COOK HOUSE BLDG No. T/8-14A T/15-21A AT ENGR REGT AND SPL REPAIR OF BLDG No T-44 T-46 AND T-47 (OR LINES) OF B COY 5221 ASC BN (MT)
2023_MES_601087_1
8328/E8
Open Tender
Civil Works
Item Rate
183 days
NASIRABAD
AS PER NIT
6 documents required · 6 mandatory
₹500
GE NASIRABAD
₹98,000
Yes
21 Sept 2023
5 Jun 2023
10 Jul 2023
5 Jun 2023
8 Jul 2023
24 Jun 2023
5 Jun 2023 - 12 Jun 2023
Amount
Demolition of cement concrete (unreinforced ) in floors and pavings n. exc 15cm thickness (above or below GL) complete all as specified and directed
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed.
Taking down cement or cement lime plaster or stone / brick wall, ceiling including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
Taking down chowkhat or frames with shutter (without taking off shutter from the frame ) area exc 1.5 Sqm but n. exc 4.0 Sqm each complete with hold fasts etc complete all as specified and directed.
BLANK
Demolition of brick work or stone masonary built in cement mortar etc complete all as specified and directed.
M&L for brick work with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.
M & L for brickwork with fly ash bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge
M&L for walling Random rubble masonary uncoursed well bonded bedded and solidly hearted and built in cement mortar 1:6 etc complete all as specified and directed.
All as per sl item No 10.00 here in before but except stones. Note: Old servieable stones retrieved vide Sl item no 7.00 shall be reused.
Extra over stone masonary for hammer dressing to face beds and joints maximum depression on face (sand stone) n. exc 20mm depression etc complete all as specified and directed.
M&L for rendering in cement mortar (1:6), 15mm thick on other than fair faces of brick work / stone masonary surfaces finished even and smooth without using extra cement, complete all as specified and directed.
M&L for 15mm thick rendering in cement mortar (1:4) on other than fair faces of brick / stone masonary surfaces, finished even and smooth without using extra cement, complete all as specified and directed. (WPC measured and paid separately)
M&L for rough cast plaster over 15mm thick cement plaster in cement mortar 1:4 on stone / brick masonary wall surfaces complete all as specified and directed.
M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in floors complete all as specified and directed.
M&L for glazed ceramic coloured tiles 7 to 8mm thick in vertcial surfaces of size exceeding 0.11 Sqm but not excceding 0.18 Sqm set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed plaster in cement mortar 1:4 complete all as specified and directed.
M&L for machine cut kota stone slab, 20-25mm thick over and including 20mm thick screed bedding in cement mortar 1:6 as in floors, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing with mirror polish complete all as specified and directed.
M&L for machine cut kota stone slab in skirting / steps / risers of reqd size, 20 to 25mm thick & including 15mm thick screed bedding in cement mortar 1:4 as in floors, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing with mirror polish complete all as specified and directed.
M&L for mirror polishing on granite/Kota stone/stone work where ever required to give high gloss finish complete all as specified and directed.
M&L for RCC, type B-1 (1:2:4) using 20mm graded aggregate in, slab supported on wall, walls beams and columns in floors, roof landings complete all as specified and directed.
M&L for TMT bars of 6 to 8mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9 mm dia complete all as specified and directed.
M&L for form work for flat fair finished surfaces of concrete to soffits of suspended slabs such as roof slab not exceeding 200mm thick complete all as specified and directed.
M&L for 18 to 20mm thick granite ( of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including laid over 15mm thick screed bed in CM (1:6) complete all as specified and directed.
S&F Pressed steel door frame of size 105 x 60mm for doors with one or more rebates incl necessary fixing lugs hinges, lock strike plate,hold fasts etc. including one shop coat of priming and filling PCC 1:3:6 type C1, complete all as specified & directed.
S&F Pressed steel door frame of size 125 x 60mm for doors with one or more rebates incl necessary fixing lugs hinges, lock strike plate,hold fasts etc. including one shop coat of priming and filling PCC 1:3:6 type C1, complete all as specified & directed.
S & F Flush shutters 30mm thick, solid core construction, with block board core and plywood face panels commercial type on both side and both facesis covered with approved pattern with Decorative coloured laminate type 1 of 0.9 mm thick and all around side faces covered with 10mm thick 1st class hard wood liping duly polished complete all as per specified and directed.
Taking down old unserviceable steel window / ventilator and S & F Steel window/ventilator factory made, out of MS hollow section 79mm x 39mmx1.6mm thick frame with double shutter (glazed & wiregauged shutters) made out of Z section using flush butt welding and tennon riveting all as per IS 1038/83, dobby hinges shall be provided to both shutters, Locking arrangements as per sample approval by GE, provided with knob, 10mm MS square bars in grill, Z section handle 100mm size and 150mm long hook & eye welded to frame and shutter, four Nos lugs welded to frame inculding necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fast and making good in PCC 1:2:4 type B-1 including two coat of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed. Note : Wire mesh and sheet glass shall be measured & paid separately under respective items.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples all as specified and directed.
S&F 3mm thick sheet glass, ordinary quality, 3mm thick fixed with oil putty size of glass not exc 0.50 sqm in each pane, complete all as specified and directed.
S&F 150mm long aluminium anodised barrel tower bolts of extruded section all as specified and directed.
S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F hasp & staple 100mm size safety type, aluminium anodised with mild steel hinges pin including bolt of hinge plate & fixed with screws complete all as specified and directed.
S&F 300mm long alumimium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy all as specified and directed.
S & F in repairs 150 mm long door stopper of alumunium alloy body door stopper fixing on door, complete all as specified.
S&F 300mm ordinary Mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
Taking down old unserviceable 15mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed.
Taking down old unserviceable 20mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed.
Taking down old unserviceable 25mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed.
S&F 15mm GI water tubing( Concealed type), medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.
S&F 20mm GI water tubing, medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.
S&F 25mm GI water tubing, medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed.
Refixing old 15mm GI tubing (Concealed type) galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed.
Refixing old 20mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed.
Disconnecting & taking down the existing unserviceable water tank and Supply and fixing 1000 Litre capacity white colour rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) , hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I complete all as specified and directed.
S&F 20mm ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe of 20mm dia and fixed (minimum weight 210 gms)
S&F in repairs 15mm bore cast copper alloy chromium plated fancy type bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed.
Dsmantling wrought iron/mild steel work of any description complete all as specified and directed.
S&F mild steel framed work such as grills, grating cooler stands, etc, with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.
M&L providing 50x50mm aluminium anodised grills mesh for fixing in wooden gauged door shutter weight not less than 1.2Kg/ Sqm complete all as specified and directed by Engr-in-Charge.
Supply only liquid water proofing compound of approved quality and make confirming to IS complete all as specified and directed.
Taking down 100mm / 75mm dia AC/PVC/CI pipe (any size or pattern ) including all fitting, heads, shoes, bends and removing from sites complete all as specified and directed. (Measured over all as fixed along the centre line over the fittings and accessories)
S&F 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new MS stack clamps of FI 50 x 3mm complete all as specified and directed.
S&F 75mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new MS stack clamps of FI 50 x 3mm complete all as specified and directed.
S&F 110mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed.
S&F 75mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed.
S&F in repairs PVC (SWR) floor trap/ Nahani trap 75mm, plain with grating including jointing to waste pipe fixed in cement concrete type (1:2:4) complete all as specified and directed.
M&L for cement concrete 1:2:4 using 20mm graded aggregate as in surface channel and drain complete all as specified and directed.
Extra for fair finishes drain or channel 30cm and over in girth in cement concrete using extra cement including forming mounds metred /stopped ends etc complete all as specified and directed.
M&L for PCC (1:3:6) type C-1 using 20mm graded stone aggregate, 75mm thick as in plinth protection finished fair & even laid in alternative bays n. exc 2M in length and joints filled with bitumen mastic 1:3 complete all as specified and directed.
M&L for preparation of new steel surfaces over 10 cm width or girth & applying two coats of synthetic enamel paint of 1st quality over a coat of red oxide/zinc chrome primer, complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description over 10cm width or girth & applying two coat of synthetic enamel paint of approved quality, tint to achieve glossy finish, complete all as specified and directed.
M&L for preparation of new or previously untreated wood and wood based surfaces of any description not otherwise descriped over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of newly plastered surface of wall and apply two coats of oil bound distemper over a coat of 1mm thick wall care putty, complete all as specified and directed.
M&L for preparation of newly plastered/concrete surfaces and applying two coats of cement base paint over one coat of cement based primer, complete all as specified and directed.
Supply & fixing 18mm thick (one side decorative lamination & other side balancing lamination sheet) solid PVC board with cement solvent adhesive for shutter / cup boards / partition wall / wall cabinet and similar work including piano hinges and stainless steel handle complete all as specified and directed.
M & L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc (Fe- 410W Grade-E-250 quality A) compete all as specefied and directed by E-in-Charge.
Dismantling asbestos Cement (corrugated, semi corrugated, etc) sheets in roof covering complete all as specified & directed.
S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/ Lor J type hook complete all as specified & directed.
S & F for pre-painted galvalume aluminum zinc coating GI based Profile steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/ Lor J type hook complete all as specified & directed.
M & L for cement concrete (Type B0, 1:2:4, 12.5 mm graded aggregate) as in copings, kneelers, apex stones, bed plates, water troughts and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified & directed.
M&L for 100mm thick plain cement concrete type C-2 1:3:6 (40mm graded stone aggregate ) as in floor or foundations complete all as specified and directed.
M&L for precast cement concrete type B-1 1:2:4 (20mm graded stone aggregate ) as inlanding, cover slabs (for drainage etc) complete all as specified and directed.
Providing & Fixing false ceiling with fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4mm thickness (as per IS:14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross "T" of size 15x32 mm made of 0.30 mm sheet, 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 15x20 mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including , required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T -sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, all complete at all heights and including Dismantling of ceiling board/lathing any thickness including frame work as per direction of Engineer-in-charge.
S&F Second class HW, plain, solid, straight chowkhats & frames, wrought, framed, rebated on the solid, rounded or chamfered, put together glue pinned at joints complete all as specified and directed.
M&L for 75mm thick cement concrete type D-2 1:4:8 (40mm graded stone aggregate ) as in floors / pavings complete all as specified and directed.
M&L for factory made 60mm thick machine pressed precast cement concrete coloured, reflective type interlocking paver blocks of Grade M-35 conforming to IS 15658-2006 of shape and size as directed with grey cement and pigment laid over & including 25mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as specified & directed.
S & F in repair 4mm dia galvanised medium coated steel wire cut to length including heavy duty galvanised Turnbuckle hook as required for mosquito net hanging etc complete all as specified and directed. Make :- TATA (Wiron)/ Jindal.
S&F in repairs, 25mm dia stainless steel curtain rod heavy duty with a pair of decorative Curtain Finials/ knob & heavy Curtain Support Bracket for rod made of stainless steel, etc. complete all as specified & directed.
M&L for pre-cast RCC 1:2:4 type B1 using 20mm graded stone aggregrate as in slab for lintels,chajjas, drainage cover,shelves or similar works set in CM 1:6 complete all as specified and directed by Engineer-in-charge. (Note :- reinforcement shall be measured and paid separately)
M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge.
Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, ceiling roses, holders, regulators, sockets etc., removing materials from site and making good disturbed surface of walls, floors etc complete all as specified and as directed by the Engineer-in-Charge
Taking down MCB DB's complete with MCB's/Isolator etc removing materials from site and making good disturbed surface of walls, floors etc complete all as specified and as directed by the Engineer-in-Charge
M&L for point wiring with 1.5 Sqmm, PVC insulated, unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit 20mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc./ fittings ISI marked and sunk type pressed steel anodised terminal box 1.2 mm thick with bakelite laminated sheet top cover 3 mm thick, brass screws and cup washers including 1.5 Sqmm stranded copper conductor PVC insulated green in colour as continous earth conductor connected to common earth and earth dolly with all accessories for:-
One light point/bell point controlled by one, one way switch.
One ceiling fan/exhaust fan point controlled by one, one way switch.
One three pin 5 Amp socket on same board with other switches.
One 3 pin 5 Amp socket on independent board.
All as per item No. 85.00 here-in-before but with 2.5 Sqmm, for one 5 pin 5/15 Amp socket on independent board including 2.5 Sqmm stranded copper conductor (FRLS) PVC insulated green in colour as continous earth conductor connected to common earth.
S&F of sub main wiring with two runs of single core PVC insulated and unsheathed multistranded (FRLS) copper conductor cable of size 6.00 Sqmm LT, 1100 volts grade, drawn through and including 25 mm dia or higher PVC non metallic concealed conduit with accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. and fittings and one run of 6 sqmm single core multistranded copper conductor cable green colour as earth continuity conductor.
S&F switch piano flush type 5 amps, single pole one way 240 volts.
S&F switch piano flush type 15/16 amps, single pole one way 240 volts.
S&F socket 6Amp, 2/3 pin combined 2 module complete all as specified and directed.
S&F socket 16 Amp, 2/3 pin combined 2 module complete all as specified and directed.
S&F socket out let 2 in 1,multipurpose 3 pin 15/16 Amp flush type ISI marked complete.
S&F ceiling fan regulator electronic flush , steped (four step) 230 Volts AC
S&F ceiling rose surface bakelite 3 terminals 63.5 x 17 mm.
S&F of lamp holder PVC/polycarbonate type with back plate complete all as specified and directed.
S&F LED tube light fitting in acrylic linear tube (1x 18 watt),230V for single LED tube light including 1 x 18 W LED retrofit bar professional CW 6500 K cover channel, bipin holders,LED power driver, connector block, etc complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as specified and directed.
S&F LED box type tube light fitting 20 watt made up of CRCA sheet with pre wired double sided connections including 1x20 watt retrofit LED tube rod with extruded aluminium body , PC diffuser and inbuilt driver , double sided connection, including connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as specified and directed.
S&F LED bulk head luminaire 1x 10 W bulk, IP 65 protection complete with all accessories and including connecting up with three core copper conductor cable complete all as specified and directed.
S&F testing and commissioning energy saving street light luminaire 35 watt LED, pressure die cast housing with epoxy powder coated with colour finish and prismatic poly carbonate coverlic cover complete with, IP 66 protection including connecting with three core copper flexible wire from ceiling rose to connector of light fitting complete all as specified and directed.
Supply and fixing street light bracket made of 32 mm GI pipe, 1.2 mtr length fixed with two Nos of clamp, nut and bolts complete all as specified and directed.
S & F of MCB SP, 240 volt, 6 Amp to 40 Amp capacity, 10 KA, 'C' curve complete all as specified and directed.
S & F of MCB SPN, 240 volt, 63 Amp capacity, 10 KA , 'C' curve complete all as specified and directed.
S&F of MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door IP-42 DB's , made out of sheet steel enclosure, recessed type, factory made powder coated 8 way, 240 volts suitable for housing MCB's complete all as specified and directed. Note: MCB DB and MCB SP/SPN will be of same make.
Taking down existing ceiling fan, dismantling blades and refixing after cleaning incl conecting up with three core flexible cable from ceiling rose to fan.
M&L for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below ground level, connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and other end of earth wire connected to main switch board and protected by galvanised iron pipe light grade 15mm bore and water pipe 20 mm bore GI med grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover with handle all as specified and shown in elect plate No 3 of SSR Part-I of 2009 incl dismantling of old unsv existing earthing .
S&F LED lamp 9/10 watt suitable for 230 volts, 50 Hz B-22 Base complete all as specified and directed.
Supply and laying including jointing, testing or fixing or passing through pipe, trench or duct commissioning and testing XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade size 16 sqmm, 4 core complete all as specified and directed by Engineer-in-Charge.
Supply and laying including jointing, testing or fixing or passing through pipe, trench or duct commissioning and testing XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade size 10 sqmm, 2 core complete all as specified and directed by Engineer-in-Charge.
Supply and fixing tubes light grade GI tubing 40 mm dia with all fitting laid in trenches complete all as specified and as directed.
Supply and fixing tubes light grade GI tubing 25 mm dia with all fitting laid in trenches complete all as specified and as directed.
Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, cable laying and getting out in soft/ loose soil complete all as specified and as directed.
Returning and filling in approved earth including levelling spreading watering and well ramming in any layers n. exc 25cm thick complete all as specified and directed.
Removing excavated materials n. exc 100m and depositing where directed and complete all as specified and directed.
Supply & spreading in trenches dry river sand cushioning to underground cable in trenches including spreading, levelling hand punning down complete all as specified and directed Note:- Depth of sand cushioning will be measured after punning down and levelling the sand properly.
M & L for laying of bricks locally available sub class 'B' bricks, non-modular sizes as per IS 1077: 1992 for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable all as directed.
S&F ceiling fan 1200 mm sweep , 230 Volts, AC , 50 Hz, copper winded motor, BE star rated white colour complete with motor, blade set of three nos , down rod, canopy, shackle assy complete all as specified and directed.
SHREE BALAJI TRADING CORPORATION
Shree Sai Ram Enterprises
M/s AKASH CONSTRUCTION CO.
kirtiman traders
JWALA ENTERPRISES
ANAM BUILDCON
MAHARANI CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .