Construction of 2nd floor over existing building of Academic Block (G plus 1) at Udhampur Campus of Jammu University CIVIL AND SANITARY WORK

Amount

CIVIL WORK P & L in position reinforcement cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 12.5/20 mm nominal size) including formwork but excluding cost of reinforcement in:- Columns, walls including attached pilasters buttresses etc. Beams (straight or curved), rib of coffers, lintels, brackets, suspended floors, roofs (any slope), water tank, slabs of coffers, landings, balconies, shelves chajjas, vertical and horizontal fins individually or forming box louvers band, facias and eaves boards lintels, bands plain window cills, staircases and spiral staircases, arches, arch ribs, domes, vaults shells, folded plate, staircase steps including waist slab, folded steps etc. All work above plinth level upto floor V level. Nothing extra shall be paid for additional height of form work

Providing steel thermo mechanically treated bars conforming to IS:45612000 reinforcement for all RCC work including bending binding and placing in position complete including cost of steel reinforcement and binding with 18-20 gauge, soft drawn concealed steel binding wire complete. All work upto floor V level. (Fe-500/500-D) of make Sail/Tata/Rashtriya Ispat

Brick work with F.P.S brick of class designation 75 in foundation, plinth and in super structure in cement mortar 1:6 mix (1 cement 6 fine sand) including cost of scaffolding, curing etc complete. All work upto floor V level.

Half brick masonry with brick of class designation 75 in foundation, Plinth & Superstructure in Cement mortar 1:4(1 cement : 4 sand) including cost of scaffolding, curing etc complete . All work upto floor V level.

Extra for providing and placing in position 2 Nos. 6mm dia MS bars at every third course of half brick masonry (with FPS bricks). All work upto floor V level.

Painting top of roofs with bitumen of approved quality at 17kg per 10sqm impregnated with a coat of course sand at 60 cudm per 10sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete. VG 10

100 mm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35 kg/Cum of earth gobri leaping with mix 1:1 (1 clay 1 cow dung) and covered with flat FPS brick tiles of class designation 100 grouted with cement mortar 1:3 (1 cement 3 sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat. All work upto floor V level.

Supply & laying of 400 micron thick PVC sheet over roof (overlaps at joints of PVC sheet should be 200 mm wide and pasted to each other with bitumen @1.7 kg/sqm.) complete in all respects.

Providing angular fillets 75mm x 75 mm cement concrete 1:2:4 (1 cement : 2 course sand : 4 crushed stone aggregate 10 mm downgauge) including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design 75x75mm deep chase.

Making khurras 45x45cm with average minimum thickness of5cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20mm nominal size) over PVC sheet 1mx1mx400 micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing and laying water proofing treatment to vertical and horizontal surface of depressed portions of W.C kitchen and like consisting of: First Layer: Applying cement slurry @4.4kg/Sqm mixed with water proofing compound confirming to IS: 2645 in recommended proportion s including rounding of junction of vertical and horizontal surface. Second Layer: 20 mm thick cement plaster (1 cement 3 coarse sand) mixed with water proofing compound ACRO -1 in recommended proportions including rounding of junctions of vertical and horizontal surface. Third layer: Applying blown or/residual bitumen applied hot at 1.7 kg per sqm. Of area on both horizontal and vertical surfaces of sunken area Fourth Layer: 400 micron thick PVC sheet (Overlaps at joints of PVC sheet should be 100mm wide and pasted to each other with bitumen @ 1.7 kg/sqm on both horizontal and vertical surfaces of sunken area. Perforated PVC pipe along length of toilet with outlet towards sanitary shaft.

10-15mm thick cement plaster 1:6 (1 cement: 6 coarse sand) in single coat on rough/fair side of single or half brick walls for interior plastering. All work upto floor V level including formwork/scaffolding etc. complete.

10-15mm thick cement plaster 1:6 (1 cement: 6 coarse sand) in single coat on rough/fair side of single or half brick walls for exterior plastering. All work upto floor V level including formwork/scaffolding etc. complete.

6mm-10mm cement plaster 1:3 (1 cement :3 fine Sand) to ceiling and other RCC exposed surface where required as per the instructions of the Engineer-in-charge including cost of centering, shuttering, scaffolding etc. as required complete. All work upto floor V level.

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacture on wall surface to give an even finish. All work upto floor V level (Make Birla/JK/Asian)

Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall/ ceiling/slopping surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture. All work upto floor V level (Make Asian/Nerolac/Berger)

Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on new work (two or more coats) applied @ 1.43 litre/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10sqm) (All exterior sides of building). All work upto floor V level. (Apex/Excel/Asian6)

Providing and Laying Cement Concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded Brick aggregate 40mm nominal size) including machine mixing, consolidation, curing etc. complete. All work upto floor V level.

Providing and laying vitrified floor tiles (Double Charged) Size of tile 60x60 cm, 8-10 mm thick with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement mixed with pigment of matching shade complete. All work upto floor V level (Make Kajaria/Somany/NITCO/Johnson/RAK)

Providing and fixing ISI quality coloured (as approved) ceramic glazed tiles on wall conforming to IS: 13753 of minimum thickness 5mm of approved make and colour shades as required in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 and jointing with grey cement slurry @ 3.3kg/ Sqmt including finishing the joints with Synthetic Grout mixed with pigment to match the shade of the tile complete size 300x450 mm / 300x600 mm. All work upto floor V level.(Make Kajaria/Somany/NITCO/Johnson/RAK)

Providing and laying Udhaipur Green Marble stone Flooring / skirting with 16mm (average) thick marble stone over 20mm average thick base of cement mortar 1:4 (mix) (1 cement : 4 coarse sand) laid and jointed with cement slurry joints finished with synthetic grout mixed with pigment of matching shade including rubbing, edge moulding, granite polishing to give high gloss finish complete. Nothing extra shall be paid on account of wastage. All work upto floor V level.

Providing and laying in floors/skirting polished Antiskid tile of approved make floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colors and shades, laid on 20mm thick cement mortar 1:4 ( 1 Cement : 4 coarse sand) including grouting the joints with synthetic grout mixed with matching pigments, curing etc. complete. All work upto floor V level. Size of tile 300 x 300/300 x 450mm (Make (Make Kajaria/Somany/NITCO/Johnson/RAK)

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately). All work upto floor V level. a) For Fixed portion / Openable Powder coated aluminum (minimum thickness of powder coated 50 microns)

--------do------ ----------do------------ b) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and allied fittings complete as required including the cost of PVC / neoprene gasket required Powder coated aluminum (minimum thickness of powder coated 50 microns)

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminum snap beading shall be paid in basic item) : With glass panes of 5.00 mm thickness (wt not less than 13.75 kg / Sqm). All work upto floor V level.

----------do---------- 5 mm thick toughened glass

Providing and fixing in position M.S. door made out of M.S. Angle chowkhats 40x40x6mm, shutter frame of M.S. Angle 35x35x5mm with M.S. flat horizontal & diagonal braces of sections 35x5mm, M.S. sheet cover 16 gauge M.S. hinges and all other fittings accessories like M.S. tower bolts, handles and sliding bolts etc required for the completion of the items including applying a coat of metal primer and then two or more coats with synthetic enamel paint of approved brand and manufacture complete as per requirements, drawings and as directed by Engineer in charge.

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS 12823 Grade-I type II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass/stainless steel screw etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides including applying priming coat of wood primer and then two or more coats with synthetic enamel paint of approved brand and manufacture complete. All work upto floor V level.

Providing and fixing double action hydraulic floor spring with stainless steel plate of approved brand and manufacture IS: 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece cast iron outer box with slide plate etc. complete as per the direction of Engineer-in-charge with stainless steel plate minimum 1.25 mm thickness

Providing and fixing IS: 3564 marked aluminum extruded section body tubular type universal hydraulic door closer, with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing bright finished Brsss 100 mm mortice latch and lock ISI marked with six levers and a pair of anodized (anodic coated not less than grade AC 10 as per IS : 1868) aluminum lever handles with necessary screws etc. complete, best make of approved quality.

Providing and fixing aluminum door/window fittings ISI Marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) Transparent or dyed to required colour or shade with necessary screws etc. complete. Tower bolts 250x10 mm

-------do-------- Tower bolts 200x10 mm

-------do-------- Tower bolts 150x10 mm

-------do-------- Handles 100 mm

-------do-------- Handles 125 mm

-------do-------- Hanging floor door stopper (twin rubber)

Providing and fixing stainless steel (Grade 304 of matt hairline finish) 50mm dia stair case railing 3'-0" height Above Riser Clear as per design and drawings including cutting wall and making good the same with PCC of mix 1:2:4 (1 cement : 2 coarse : 4 graded stone aggregate 20mm down graded) drilling holes in step / floor and filling with pig lead in holes after providing and fixing 25mm dia steel balusters on steps and 50mm dia (minimum) end balusters with necessary steel caps of approved shape and size including fixing of 12mm sq/dia bar running along baluster as per architectural drawing supplied including complete fixing and installation, polishing of all joints complete upto all floor levels and height as per drawings and directions of the Architect / Engineer in Charge.

Providing and fixing aluminum grill Powder coated aluminum (minimum thickness of powder coated 50 microns) of approved design/ pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodized aluminum standard section around the opening, all complete as per requirement and direction of Engineer incharge (only weight of grill to be measured for payment). All work upto floor V level.

Providing and fixing Curtain Wall structure made out of 10 SWG Powder coated aluminium tube of size 150mmx50m with openable panel as required are finished smooth and wedge in front to hold glass panes. The frame has to be fixed in position with 15x3mm lugs and 12 cm, anchor bolt embedded in concrete 1:2:4 blocks as required. The glazing shall be fixed outside in minimum panel size as per drawing flushed to each other to achieve smooth surface without undulation and sharp edges. The plate glass used shall 6 mm thick tempered reflective glass of approved make and colour. The glass should be jointed to the frame with silicon sealant of colour to match the shade of glass of approved make and quality with all necessary accessories like spacers, holder etc. The whole system after installation shall be completely weatherproof and sealed against air and water complete upto all floor levels and height as per drawings and directions of the Architect/ Engineer in Charge. All work upto floor V level.

Providing and laying / fixing expansion joint in position at floor level comprising of 35mm thick thermocol sheet of 16 gauge density over metal cradle, poly sulphide based expansion joint sealant 1½" thick and 35mm wide over thermocol sheet including stone /slab and poly-sulphate based expansion joints as sealant complete in all respects including cost of all material and labour required. Complete upto all floor levels and height in all respects as per drawings and directions of the Architect / Engineer in charge.

Providing and laying VERTICAL EXPANSION JOINT in position in RCC columns having 2" thick thermocol sheet and 12" width with and POLYSULPHIDE BASED expansion joints as sealant 1.1/2" thickness 2" width on top of thermocol sheet and 9" wide GI sheet fixed with 75mm long Gunmetal Anchor Bolts from both ends @ 12" c/c over RCC columns including cost of all material and labour required complete upto all floor level & height in all respects as per drawings and direction of the Architect / Engineer in charge.

Providing and laying in position expansion joints at roof comprising of 2" thick thermocol sheet 16 kg density over metal cradle and poly sulphide based expansion joint sealant 1½" thick and 2" width over thermocol sheet including rick cement mortar and again thermocol sheet of same thickness width and density and finally covered with again silicon based expansion joints of ½" thickness etc. including cost of all material and labour required complete in all respects as per drawings and requirements

Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with Makrana White Second quality. 16 mm thick (150 mm thick marble strip)

40mm thick cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate with 20mm/12.5 mm nominal size. All work upto floor V level.

Providing and Laying brick bats 40 mm nominal size in the sunken portion of the slab including consolidation, compaction etc. complete. All work upto floor V level.

Extra for pre finished nosing to treads of steps of marble stone

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete 300 x 16 mm

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within the Campus as per direction of Engineer-in-charge. All work upto floor V level.

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material wihtin the Campus as per direction of Engineer-in-charge. In Cement Mortar All work upto floor V level.

Demolishing mud phaska in terracing and disposal of material within the Campus as directed by the Engineer-in-charge. All work upto floor V level.

Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within the Campus as directed by the Engineer-in-charge. All work upto floor V level.

Finishing walls with premium Acrylic smooth exterior paint with siliconadditives of required shade. Old work (one or more coats applied @ 0.83 liters/ 10sqm) as per the satisfaction of the Engineer-in-charge. All work upto floor V level.

Providing and fixing of water proof ply of approved quality (Green /Orchid /Century) including cost of labour nut bolts for fixing of frames fevicol, nails etc, filling the surface with chalk putty mixed with paint, sand papering to prepare the surface even and smooth applying priming coat of wood primer and then (two or more coats) with synthetic enamel paint of approved brand and manufactureNothing extra shall be paid for any wastage (for manufacture of cupboard) complete upto all floor levels and height as per drawings and strictly as per direction by the Architect / Engineer in Charge. 6mm Thick ply

-------do------ 19mm Thick ply

Providing and fixing of 1.0mm thick Sunmica of approved quality & make including cost of labour fevicol nails etc as required nothing extra shall be paid for any wastage. All work upto floor V level (Make Century/Green/Orchid) for door shutter, cupboard shutters etc.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): SALWOOD. All work upto floor V level.

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 35 mm thick including wood primer and then two or more coats of synthetic enamal paint on the exposed surfaces wherever sunmica is not fixed. All work upto floor V level.

Providing and fixing glass panes 5.00 mm thick with necesary beading/sash bar for fixed portion of wooden door/window/ventilators etc.

SANITARY WORK Providing and fixing vitreous china pedestal type (European type/ wash down type) water closet pan including providing and fixing solid plastic seat with lid (white colour) and providing and fixing low level chinaware flushing cistern with all manually controlled device (handle lever) confirm to Is; 7231 10 liter capacity including C.P Flush bend etc. complete (Make Parryware /Hindware/Cera/Hindustan)

Providing and fixing white vitreous china laboratory sink wth C.I brackets, C.P brass chain with rubber plugs, 40 mm C.P Brass waste and 40 mm C.P Brass trap with necessary C.P Brass unions complete, including painting of fittings and brackets, cutting and making good the walls wherever required. (Make Parryware /Hindware/Cera/Hindustan) Size 450 x 300 x 150 mm

Providing and fixing vitreous chinaware wash basin of size size 550x400 mm of make Parryware/Hindware/Cera)

Providing and fixingwhite vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings and making good the wall and floor complete in all respects.. make Parryware/Hindware/Cera)

Providing and fixing best quality White Vitreous chinaware flat back half stall urinal of 580x380x350 mm (Make Parryware /Hindware/Cera/Hindustan)with C.P. brass pressmatic tap auto closing system angle valve C.P. brass, dome waste,C.P. brass spreader with brass unions and GI clamps complete including fittings, brackets, cutting and making good the walls complete in all respects with 5 ltr. PVC automatic flushing cistern.

Providing and fixing best quality Vitreous white vitreous chinaware urinal partitions size 755x165x365 mm including cost of all material, fittings and labour complete in all respects.(Make Parryware /Hindware/Cera/Hindustan)

Providing and fixing 100mm sand cast iron grating for gully, floor or nahani trap

Providing and fixing 600x400 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs, etc. complete.

Providing and fixing C.P Brass toilet paper holder.

Providing and laying PVC rain water pipes 4 kg/cm2 pressure excluding PVC fittings, jointing with adhesive/seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion (Make Astral/Supreme/Finolex/Prince/Uniplas) 110 mm dia

---------do--------- 75 mm dia

Providing and fixing in position PVC specials as per IS: 14735 including cutting, jointing and wastage double socket 'B' & fitting with rubber gasket joint at all heights, levels, including cutting jointing, wastage, cutting chases and hole and other required material as per directions of Architect / Engineer-in-charge.(Make Astral/Supreme/Finolex/Prince/Uniplas) PVC BEND 110 mm dia

---------do----------- 75 mm dia

-------do--- PVC SINGLE TEE WITH DOOR 110 x110x110 mm dia

-------do------ PVC SINGLE TEE WITH DOOR 75x75x75 mm dia

----------do----------- PVC COLLOR 110 mm dia

----------do------------ PVC COLLOR 75 mm dia

---------do------------- PVC COWLS 110 mm dia

----------do------------ PVC COWLS 75 mm dia

--------do-------------- PVC Shoe 110 mm dia

----------do-------------- PVC Reducer Socket 4 "x 3"

-----------do-------------- PVC Reducer Tee 4 "x 3"

Providing and fixing PVC trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors. (Make Astral/Supreme/Finolex/Prince/Uniplas) 100 mm inlet and 100 mm outlet

--------do------- 100 mm inlet and 75mm outlet

Providing and fixing PTMT soap dish holder having length 138 mm, breadth 102 mm, height 75 mm with concealed fitting arrangements. Weighing not less than 106 gms.

Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighting not less than 263 gms.

Providing and fixing PTMT towel Ring trapezoidal 215 mm long, 200 mm wide with a minimum distance of 37mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.

Providing and fixing PTMT Towel rail complete with end brackets fixed on wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.

providing and fixing M.S. holder bat clamp of approved design to PVC pipes comprising of M.S. flat brackets made of 50x5mm flat of specified shape, projecting 75mm outside the wall surface and fixed on wall with 4 Each. 6mm dia expansion hold fasteners including drilling necessary holes in brick wall / CC / RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30mm x 1.6mm galvanized M.S. flats of specified shape and of total length 420mm and shall be fixed with M.S. nuts, bolts and washers of size 25x6mm, one bolt on each side of the pipe. Total brackets length upto 580mm of approved shape and design (for single 90mm/110mm dia pipe)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps including cutting chases and making good the walls (medium grade) concealed / Exposed on wall (Make Parkash Surya/Jindal or ISI Marked). 15 mm dia nominal bore

-----------do---------- 20mm dia nominal bore

-----------do---------- 25mm dia nominal bore

------------do---------- 32 mm dia nominal bore

------------do--------------- 40 mm dia nominal bore

-------------do---------- 50 mm dia nominal bore

Providing and fixing ball valve (brass) of approved quality complete. High or low pressure with lever handle ISI Marked (Sample to be approved by the Engineer-in-charge). 25mm nominal bore

------------do------------ 40 mm nominal bore

Providing and fixing gun metal non return valve of approved quality (screwed end). 25 mm nominal bore Vertical

-------------do----------- 32 mm nominal bore Vertical

-------------do------------ 50 mm nominal bore Horizontal

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) of approved make Surya Parkash/Jindal or ISI Marked) 15 mm nominal bore

------------do------------- 20 mm diameter pipe

------------do------------- 25 mm diameter pipe

------------do------------- 32 mm diameter pipe

----------do--------------- 40 mm diameter pipe

------------do------------- 50 mm diameter pipe

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS License Each with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank THREE LAYERS AND ABOVE. (Make Sintex/Star/Lotus/Vectus).

Providing and fixing C.P. brass bib cock 15mm nominal bore complete in all respects. (Make Jaquar/Hindware/Cera/Parryware).

Providing and fixing C.P. brass long body bib cock 15mm nominal bore complete in all respects. Weighing not less than 690 gms.(Make Jaquar/Hindware/Cera/Parryware).

Providing and fixing C.P. brass stop cock (concealed) of 15mm nominal bore complete in all respect.(Make Jaquar/Hindware/Cera/Parryware).

Providing and fixing C.P. brass angle valve 15mm nominal bore complete in all respects.(Make Jaquar/Hindware/Cera/Parryware).

Providing & laying PVC pipes 4kg/sqcm pressure of approved quality including jointing with jointing solvent/adhesive of following nominal dia (For Sewer line/Drainage) Make Astral/Prince/Finolex/Supreme/Uniplas) 110 mm diameter

Providing and fixing G.I. Tank nipple size 1" to 2" for connection complete in all respects.

Providing and Fixing of check Valve for motor 32mm nominal bore of approved quality complete in all respects.

Cutting holes upto 30x30cm in walls including making good the same with FPS bricks in cement mortar 1:4 (1 cement : 4 sand)

Cutting holes upto 15x15cm in RCC floors and roofs for passing the pipes etc. and repairing the hole after insertion of pipes etc. with cement concrete 1:2:4 (1 cement : 2 coarse : 4 graded stone aggregate 20 mm nominal size) including formwork, finishing complete so as to make it leakproof. All work upto floor V level.

Providing, installing and commissioning mono block water motor 2.0 H.P complete in all respects (as approved by the Engineer-in-charge). Make (Havells/Crompton/Servo)

Providing and fixing PVC P trap of approved quality (size 110 x 110 mm)

Providing and fixing stainless steel grating 100 mm dia

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete. Flexible pipe 32 mm dia

Providing and fixing CP Brass washbasin tap with hand lever ISI Make as approved by Engineer-in-charge.

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31mm of 79 mm length and 62 mm breadth weighing not less than 45gms

Providing and fixing PVC Flush Pipe of approved quality.

Providing and fixing CP Jet (heavy duty) with PVC connection pipe to be fixed with European Type WC of approved quality.

Providing and fixing uplasticized PVC connection pipe with brass unions 45 cm to 60 cm length 15 mm nominal bore of approved quality.

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.

Providng and fixing of branded vitreous wash basin flat back wal hung with fixing accessories size 560 x 415 x 200 mm (CNS-WHT-801) of apporoved brand and manufacture

Providng and fixing of branded vitreous china urinals (URS-WHT-132530) with fitting accessories of size 375 x 32 x 620

Providing and fixing Bib cock foot pressed type of approved brand and manufacture with PVC connection of length 4 feet approximately

Providing and fixing Grab Bar of approved brand and quality (Stainless Steel) of size minimum length 1065mm. Dia ranging from 32 mm to 40 mm.

Removing of existing water tank of 5000 Ltr. Capacity from the roof top at G+1 level and re-installation of the same over the roof of 2nd floor incuding fixing and placing in position with all fittings and base support complete job.