REPAIR, PAINTING AND POLISHING OF WOODEN AND STEEL FURNITURE

Amount

Sch "A" Part I (WOODEN FURNITURE) Dismantling of the worn out unserviceable parts of Bed Hard (FD-246) and replace the same with new one duly polished all as shown on drg and as directed :-

Legs (head rest side)

Legs(foot rest side)

Long Rail

Short Rail

Head Rest Complete

Foot Rest Complete

Top made out of 12 mm thick ply wood BWR grade IS-303

Stiffner of size 40x60x900mm

Supply and fixing of 3.5mm thick one side thick face plywood

Supply and fixing of half round teakwood beading

Dismantling of the worn out unserviceable parts of Bed Hard (Single) (FD-1102) and replace the same with new one duly polished all as shown on drg and as directed :-

Teak wood beading 40x40 mm (made to shape)

Head rest made out of (25mm thick exterior grade prelaminated partcle board)

Foot rest made out of (25mm thick exterior grade prelaminated partcle board)

Sides made out of 25mm thick exterior grade prelaminated partcle board

Top made out of 12 mm thick particle board

Mattress of size 1900x900x100 mm 32 density duly covered with cotton cloth(approved colour) Make of mattress :- Kurlon/Sleepwell/MM Foam or equivalent as approved by GE.

Dismantling of the worn out unserviceable parts of Bed hard plytop (FD/E6/MAP/08) and replace the same with new one duly polished all as shown on drg and as directed :-

Top made out of 12 mm thick ply wood BWR grade IS-303

18/19mm thick Pre laminated particle board fixed at head rest

18/19mm thick Pre laminated particle board fixed at foot rest

Dismantling of the worn out unserviceable parts of Book case wooden (FD-237) and replace the same with new one duly polished all as shown on drg and as directed :-

Legs made out of teak wood.

Long rail of 2nd class hard wood (of leg frame)

Short rail of 2nd class hard wood(of leg frame)

Back side 6 mm thick BWR grade plywood

Top made out of 18 mm thick Pre-laminated particle board.

Both side /bottom/partition made out of 18 mm thick Pre-laminated particle Board.

Shelf made out of 18 mm thick Pre-laminated particle board with 6 mm thick wooden beading in front

Shutter made out of 18 mm Pre-laminated particle board commercial with 4 mm thick wooden beading all round.

CP Knob

Dismantling of the worn out unserviceable parts of Chair Easy (FD-229 & FD-1108) and replace the same with new one duly polished all as shown on drg and as directed :-

Front Leg

Rear Legs

Front/back rail of Seat frame

Side rail of seat frame

Lower/Upper rail of back rest

Side rail of back rest

Arms rest

Dismantling of the worn out unserviceable parts of Chair Dining (FD-228 & FD-279) and replace the same with new one duly polished all as shown on drg and as directed :-

Front Leg

Rear Legs

Front rail of Seat frame

Back rails of seat frame

Side rails of seat frame

Back rest

Stiffiner

Dismantling of the worn out unserviceable parts of Chair Dining Offrs (FD/MAP-II/04) and replace the same with new one duly polished all as shown on drg and as directed :-

Front Leg

Rear Legs

Front rail of Seat frame

Back rails of seat frame

Side rails of seat frame

Seat made out of ply of 12 mm thick commercial ply.

Stiffiner

75 mm thick 40 density foam with duly covered with tepastiy cloth/letherite meterials (not less than Rs. 250/- per meter) for seat. Make of foam :- Kurlon/ Sleepwell or equivalent as approved by GE.

Dismantling of the worn out unserviceable parts of Chair writing (FD-280) and replace the same with new one duly polished all as shown on drg and as directed :-

Front legs

Rear legs

Front rail of seat frame

Rear rail of seat frame

Side rail of seat frame

Back rail of back seat

Stiffiner

Arms Rest

Dismantling of the worn out unserviceable parts of Table 3'x2' with Drawer/without Drawer (FD-283) and replace the same with new one duly polished all as shown on drg and as directed :-

Legs made out of teak wood

Side rail

Front Rail (with drawer)

Front rail/rear rail (without drawer)

Drawer complete with 2nd class hard wood and bottom 6 mm ply wood BWR grade

Stiffiner

Top made out of 18/19 mm thick pre-laminated Particle board with 4 mm thick wooden beading all round. Rest all as per drg and as directed.

Dismantling of the worn out unserviceable parts of Table 3'x3' wooden (FD-291) and replace the same with new one duly polished all as shown on drg and as directed :-

Legs made out of teak wood

Rail of any side

Top made out of 18/19 mm thick pre-laminated Particle board with 4 mm thick wooden beading all round. Rest all as per drg and as directed by engineer -in-charge.

Dismantling of the worn out unserviceable parts of Table Writing (FD-275) and replace the same with new one duly polished all as shown on drg and as directed :-

Legs made out of teak wood.

Side Rails

Front Rails

Stiffiner (Short Side)

Long stiffiner in between both side stiffiner

Cabinet Side of table made out of 18/19 mm MDF board commercial duly covered with 1mm thick laminated sheet

Cabinet back side with 6 mm commercial ply wood

Cabinet bottom with 19 mm thick MDF board.comercial

Cabinet bottom legs of 2nd class hard wood

Cabinet front shutter made out of 19 mm thick MDF board commercial with 1 mm thick laminated sheet with 50 mm hinges and drawer locks(ISI mark)

Drawer sides made out of 2nd class hard wood with bottom 6 mm thick ply wood commercial with CP Knobs in front and locking arrangement as per existing.

Top made out of 18/19 mm thick pre-laminated Particle board with 4 mm thick wooden beading all round. Rest all as per drg and as directed.

Dismantling of the worn out unserviceable parts of Table Dining 6 Pers (FD-239) and replace the same with new one duly polished all as shown on drg and as directed :-

Legs made out of teak wood.

Side rail

Long rail

Top made out of 18/19 mm thick pre-laminated Particle board with 4 mm thick wooden beading all round. Rest all as per drg and as directed.

Dismantling of the worn out unserviceable parts of Table Centre (FD-274 & FD-235) and replace the same with new one duly polished all as shown on drg and as directed :-

Legs made out of teak wood.

Side Rail Long

Side rail short

Top made out of 18/19 mm thick pre-laminated Particle board with 4 mm thick wooden beading all round. Rest all as per drg and as directed.

Dismantling of the worn out unserviceable parts of Teapoy (FD-232 & FD-278) and replace the same with new one duly polished all as shown on drg and as directed :-

Legs made out of teak wood.

Side Rail Long

Side Rail Short

Top made out of 18/19 mm thick pre-laminated Particle board with 4 mm thick wooden beading all round. Rest all as per drg and as directed.

Dismantling of the worn out unserviceable parts of Peg Table (FD-277 & FD-384) and replace the same with new one duly polished all as shown on drg and as directed :-

Legs made out of teak wood.

Side Rail Long

Side Rail Short

Top made out of 18/19 mm thick pre-laminated Particle board with 4 mm thick wooden beading all round. Rest all as per drg and as directed.

Dismantling of the worn out unserviceable parts of Table dressing Ladies with Mirror (FD-251) and replace the same with new one duly polished all as shown on drg and as directed :-

Long rails

Short rails

Top made out of 18 mm thick Pre-laminated particle board duly covered with 1 mm thick plastic laminated sheet and 4 mm thick wooden beading in front.

Bottom/ partition made out of 18 mm thick Pre-laminated particle board comercial with 6 mm thick wooden beading.

Side made out of 18 mm thick pre-laminated particle board with 4 mm thick wooden beading.

Back made out of 12 mm thick ply BWR

Mirror size 1220 mm x 366 mm x 5 mm thick Make:- Saint Gobain/Modi Guard or equivalent as approved by GE.

Mirror Frame of 2nd class hard wood with 6 mm thick ply commercial in back.

Sliding glass 300x300x6mm thick with aluminium Channel complete

Drawer made out of 12 mm thick plywood.

CP Knob

Removing of old existing polish by washing with caustic soda and rubbing with sand paper and making the surfaces smooth and apply two coats of french polish upto glossy finish for the following wooden furniture as specified on drawing and as directed :-

Bed Hard (FD-246)

Book case wooden (FD-237)

Chair WB without Arms (FD-225)

Chair Easy (FD-229 & 1108)

Chair Dining (FD-279 & 228)

Chair dining offrs with cushion (FD/MAP-II/04)

Chair Writing (FD-280)

Table 3'x2' with Drawer/without Drawer (FD-224 & 231)

Table 3'x3' wooden (900x900x760 mm) (FD-283)

Table Writing (FD-275)

Table dining 6/8 Pers (FD-239)

Table Centre (FD-235 & 274)

Teapoy (FD-232 & 278)

Peg Table (FD-277 & 384)

Side Board (FD-241)

Table dressing Gents (FD-230)

Table dressing Ladies (FD-251)

Sofa set 5 seater (FD-281 & FD/E6/MA P-II/02)

Sofa set 4 seater (FD-281 & FD/E6/MA P-II/02)

Removing of old worn out unserviceable cane from various type of furnitures and re-canning the same with new plastic white cane of 2 mm for canning and 4 mm wide half round for beading. Canning shall be done as per godrej pattern. (FD-279, 229 & 280)

Replacement of old unserviceable cushion with new cushion foam 530x560x100mm thick 40 density rubber foam duly covered with marking cloth & Tapestry cloth (as approved by GE) having one side long chain with double interlocking.Cost of tapestry cloth not less than Rs 250/- per meter. Make of foam :- Sleepwell/Kurlon or equivalent make as approved by GE (FD-281).

Supply of new cushoin cover for cushion foam of Size 530x560x100mm thick 40 Density (Tapestry cloth as approved by GE) having one side long chain with double interlocking. Cost of tapestry not less than Rs 250 per meter (FD-281)

Renewal of old unserviceable plywood 12 mm thick BWR grade commercial conforming to IS specification 303-1989 of Charpoy GI pipe with plytop (FD-220)

Renewal of old unserviceable plywood 12 mm thick BWR grade commercial conforming to IS specification 303-1989 of Charpoy IP with hard top (FD/MAP-II/01)

Sch "A" Part II (STEEL FURNITURE) Dismantling of the worn out unserviceable parts of Almirah large/medium steel with Shelves (FD-1031 & FD-1032) and replace the same with new one duly polished all as shown on drg and as directed :-

Lock with duplicate key

CP Handle

Removing of Old worn out unserviceable cane parts of Chair verandah (FD-256). Scraping cleaning and painting with two coats of synthetic enamel spray paint (white colour) and replace the unserviceable cane with new plastic cane of 4 mm to 4.5 wide half round 0.5 thick for caning. Caning shall be make on "Godrej Patern including replacing the four Nos of rubber shoes.

Scratching of existing paint from inside and outside complete by rubbing with sand paper and making smooth surface and applying two coats of synthetic enamel paint of approved colour / shade for the following steel furniture as specified on drawing and as directed :-

Almirah large Steel with Shelves (FD-1031)

Almirah medium Steel with Shelves (FD-1032)

Locker steel (FD-1029)

Table office clerk steel (FD-84(M))

Table office officers steel (FD-84(M))