PROVIDING FURNITURE AND MISCELLANEOUS WORK OF PROPOSED WARD OFFICE AT TEELAJAMALPURA W-13 ZONE 03

Amount

Providing furniture and Miscellaneous work of proposed Ward office at teelajamalpura w-13 Zone 03

PROVIDING AND FIXING ROLLER BLINDS OF APPROVED MAKE AND QUALITY ACCORDING TO THE SIZE AVAILABLE AND AS PER ENGINEER IN CHARGE

SOFE 3 SEATER :Providing at site visitors sitting settee with back made up of 19mm thick commercial block board of ISI mark (12"high)& with 12mm ply at base and 3" high density foam,individual seats and top to be covered eith approved colored cloth of not less than Rs.225/-per meter.The back shall have 2" high density colored seat of same cloth. The front exposed surfaces of 19mm thick commercial block board should have approved color laminated finish the base shall have 2" (h) recessed skirting as per the design & drawing portion to place necessary cables. All exposed suffaces shall have 25/19mm teak wood liping as per the requirement of the design including all materials, labour etc complete.

OFFICER TABLE

ceiling including providing and fixing of frame work made of special sectons power pressed from m.s. sheet and galvanised in accordance with zinc coating of grade 350 as per is : 277 consisting of angle cleats of size 25mm wide *1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixied to the ceiling with dash fastener 12.5mm dia*40mm long with 6mm dia bolts to the angle hangers of 25*25* 0.55mm of required length and other end of angle hanger being fixed with nut and bolts to G.I. CHANNELS 45*15*0.9MM Running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixied in a direction perpendicular to G.I channel with connecting clips made out of 2.64mm dia*230mmlong G.i wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long ,the perimeter of ceiling fixing to wall/partition with the help of rawl plugs at 450 mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler ,jointing tapes finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills,diffusers,cutout made with frame of perimeter channels suitably fixied all complete as perdrawing and specification and dirction of the engineer in charge but excluding the costof painting with : 12.5 mm thick taperrd edge gypsum board conforming to is 2095-part1

Supplying fixing & keeping in position cash counter made out of 19mm block board. Cost shall be inclujsive lf : Working top 810mm wide at 750mm height finished with 1.0mm thick laminate. Customer top 400mm wide at a height of 1165mm from ground level with 1.0mm thick laminate on top. A dwawer unit 400mm wide consisting of 3 Nos. drawers made out of 19mm block board sides & 6mm ply bottom on sliding drawer channels with locking arrangements. Drawers will also have internate partition (removable) for keeping notes of different denomination. Facia of drawer, front panel to be finished with 1mm thick laminate. Each counter will haveCPU stand, footrest, keyboard try (Ehco). All internal surfaces to be painted/polished. All fittings like handles, knob etc. will be of superior quality. Item includes cutting of holes in top & sides, making provision/ opening in counter for pipes/conduit including P&f of cable manner.

PVC CHAIR

RIWALVING CHAIR

M.S Bench

Bidder Name

Amount

F K CONSTRUCTION(GSTN-23GNMPK5402H1Z2)

AASHIYANA CONSTRUCTION(GSTN-23CLEPK8408F1ZA)

AASHIYANA CONSTRUCTION

AASHIYANA CONSTRUCTION