Providing safety fencing (RCC Boundary wall) along the track in KYN-IGP section at required location to prevent trespassing under Sr. DEN/NE section.

1- Providing safety fencing(Boundary wall) along the track in KYN-IGP

location to prevent tress passing under Sr. DEN/NE section.

DSR ITEM - Providing safety fencing(Boundary wall) along the track in KYN-IGP section at required

location to prevent tresspassing under Sr.DEN/NE section.

S No. Item Description of Item Unit Qty Rate Amount

2.0 EARTH WORK

2.1S General

Earth work in excavation by mechanical means

(Hydraulic excavator)/manual means over

areas (exceeding 30 cm in depth, 1.5 m in

2.6 width as well as 10 sqm on plan) including

getting out and disposal of excavated earth

lead upto 50 m and for all lift, as directed by

Engineer-in-charge.

MUMBAI- CST-DIVISION-ENGG/CENTRAL RLY

Earth work in excavation by mechanical means

(Hydraulic excavator)/manual means over

areas (exceeding 30 cm in depth, 1.5 m in

2.7 width as well as 10 sqm on plan) including

getting out and disposal of excavated earth

lead upto 50 m and lift upto 1.5 m, as directed

by Engineer-in-charge.

4.0 CONCRETE WORK

4.1S CEMENT CONCRETE (CAST IN SITU)

Providing and laying in position cement

concrete of specified grade excluding the cost

of centering and shuttering - All work up to

derived from natural sources : 4 graded stone

aggregate 20 mm nominal size derived from

natural sources)

5.0 REINFORCEMENT CEMENT CONCRETE

5.9S FORM WORK

Centering and shuttering including strutting,

propping etc. and removal of form for

5.9.1 Foundations, footings, bases of columns, etc. Sqm 18250 392.15 7156737.5

for mass concrete

5.9.2 Walls (any thickness) including attached Sqm 89722.2 842.5 75590953.5

6 pilasters, buttresses, plinth and string courses

5.9.5 Lintels, beams, plinth beams, girders, Sqm 22300 736.4 16421720

bressummers and cantilevers

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Sqm 21600 961.3 20764080

5.22S STEEL REINFORCEMENT

Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in

position and binding all complete upto plinth

5.22.6 Thermo-Mechanically Treated bars of grade Fe- Kg 503000 107.85 54248550

5.33S DESIGN MIX CONCRETE

Providing and laying in position ready mixed or

site batched design mix cement concrete for

reinforced cement concrete work; using coarse

aggregate and fine aggregate derived from

natural sources, Portland Pozzolana / Ordinary

Portland /Portland Slag cement, admixtures in

recommended proportions as per IS: 9103 to

5.33 accelerate / retard setting of concrete, to

improve durability and workability without

impairing strength; including pumping of

concrete to site of laying, curing, carriage for

all leads; but excluding the cost of centering,

shuttering, finishing and reinforcement as per

direction of the engineer-in-charge, for the

following grades of concrete.:

5.33.1 All works upto plinth level

5.33.1.2 Concrete of M30 grade with minimum cement cum 4770 9655.7 46057689

content of 350 kg /cum

5.33.2 All works above plinth level upto floor V level

5.33.2.2 Concrete of M30 grade with minimum cement cum 7680 10011.35 76887168

content of 350 kg /cum

13.0 FINISHING

13.37S INTERIOR FINISHING

MUMBAI- CST-DIVISION-ENGG/CENTRAL RLY

White washing with lime to give an even shade