Construction of building for installation of Bi-Plane DSA for Radiodiagnosis department and overall repairing of existing old dental college(GPlus2 building) at ,RIMS Imphal.

Amount

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.(2.23)

Boring and compacting of stone column of specified diameter below certain depth of excavated earth work,and compacted by hammer including (the cost of stone gravel) at every layer of 350-450mm by 2.5-5.0 tonne complete etc as direction of Engineer in charge.

450mm dia

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns, etc. for mass concrete.

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Columns, Pillars, Piers, Abutments, Posts and Struts.

5.9.3 Suspended floors, roofs, landings, balconies and access platform.

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering

1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level.

Thermo-Mechanically Treated bars

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level :

1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level upto floor five level excluding cost of centering,shuttering, finishing and reinforcement :

1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Brick work with Ist class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in: 6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand)

Cement mortar 1 : 3 (1 cement : 3 coarse sand)

Brick work with Ist class common burnt clay F.P.S.(non modular) bricks in superstructure above plinth level upto floor V level in all shapes and sizes in : 6.2.1 Cement mortar 1:4 (1 cement: 4 coarse sand)

12 mm cement plaster of mix: 13.1.1 1:4 (1 cement : 4 fine sand)

Supplying and filling in plinth with sandy soil under floors including, watering,ramming consolidating and dressing complete.2.25

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

11.33.1 Double charge vitrified tile polished finish of size

Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. 13.43.1 Two or more coats on new work

Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately :9.1.2

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.

9.5.2 30 mm thick shutters Local best quality Tolhao wood. 9.5.2.1 35 mm thick shutter

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: 13.44.1 Two or more coats on new work

Providing laying and compacting granular base/sub base according to lines gardes and cross section by using naturally occurred sand gravel /conforming to IRC grid-II of MOST specification free from organic or other deleterous constituent spread with motor grader and compacted by rolling with power roller of 8 to 10 capacity in layer not exceeding 150mm (spread thickness) i/c rolling of the road surface to proper level and grades 30cm width edging on both sides etc.complete as directed by Engineer -in-chrages

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. 13.43.1 Two or more coats on new work

Grading roof for water proofing treatment with

Cement concrete 1:2:4 (1 cem:2 coarse sand :4 graded stone aggregate 20mm nominal size)

Providing and fixing UPVC soil,Waste ,rain water and vent pipes including all requisite fittings ,jointings of pipes & fittings with solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in chrage

75mm dia

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with

Precoated galvanised iron profile sheets 0.5 mm thick

Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete :

Ridges plain (500 - 600mm)

Precoated galvanised iron profile sheets 0.50 mm thick

L. Gogon Singh (BID ID -3313482)

M/S L SHANTIKUMAR SINGH (BID ID -3313486)