REPAIR TO SUNKEN LEAKAGE SEEPAGE VEGITATION GROWTH INTERNAL PLASTER CI PIPE LINE CRUMPLE SHEET AND OTHER CONNECTED WORK AT OLD RS COLABA UNDER AGE BR II NW NAVY NAGAR

Amount

Taking down cement plaster of any discription including racking out joints hacking for key scrubbing down with water etc

M&L for rendering 15mm thick in CM 1:6 on other then fair faces of brick work or concrete surface finished even and smooth without usiing extra cement all specified & as directed.

M&L for 05 mm thick plastering in CM 1:3 on concrete surface on ceiling finished even and smooth all specified & as directed.

M&L for 20 mm thick plastering in two coats 15 mm thick backing coat in CM 1:6 and 5 mm thick setting coat in CM 1:4 mixed with water proofing compound @ 2% by weight of cement on fair faces of brick work or concrete wall surfaces finished even and smooth without using extra cement and using welded mesh where required all as specified including scaffolding, Safety net etc all complete as directed by Engr-in-Charge. (Note :- WPC to be mixed in setting coat only and WPC and welded mesh shall be measured and paid separately)

Supply only integral water proofing compound of approved ISI make.

Supply only Welded steel wire fabric not exc 4 kg per sqm for plastering in concrete surfaces

Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including one coat of priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M&L preparation of new decorated surfaces of wall including washing and applying one coat of wall care putty all over the surface and two coats of distemper oil emulsion, white or tinted on walls

M&L three coats white washing on new plastered surface on ceiling including prepration of surface all as specified and directed

Demolition of cement concrete (unrinforced) of any description and in any position not otherwise specifically provided for including chaina mozaic, WC etc.

Treatment of sunken floor slab comprises of the following specifications and all as specified :-

M&L for cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. 40 mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate mixed with integral water proofing compound @ 3% by wt of cement consumed.as in padding conc to achieve proper slope including cutting holes in bricks or RCC wall for spout (Cost cutting holes and pipes shall be measured and paid separately)

Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with integral water proofing compound @ 3% by wt of cement consumed. Fill it with water and check dampness and seepage. Where dampness/seepage is noticed, nozzles shall be fixed and grouting carried out.( WPC shall be measured & paid separately)

All junctions points of side wall where CI/GI pipes are passing through shall be sealed with epoxy puty.

After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean.

M&L for applying two coats of polymer modified cementious water proof coating as per manufacturers instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed.(This item shall be measured and paid separately)

Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with integral water proofing compound 3% by wt of cement consumed as per manufacturer's specification including rounding of corners and junctions sloping towards spout.( WPC shall be measured & paid separately)

All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round after painting with anticorrosive paint .

M & L Cutting holes in bricks or RCC walls exce half brick built in cement mortar including making good after inserting and setting spouts all as specified.

M & L GI pipe 50mm dia medium grade laid on sunken floor complete all as specified and direced by EIC.

M&L for applying two coats of polymer modified cementious water proof coating as per manufacturs instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed.

Supply only all pipes laid in sunken portion including painting with anticorrosive paint (Black Japan) all as specified and directed.

M&L for filling with PCC 1:5:10 type E2 (1 Cement : 5 coarse sand : 10 graded aggregate 40 mm nominal size) as specified.

Dismantling floor, hearth, or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.

M&L non-skid coloured Ceramic tiles 300x300x6 to 7mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not excceding 0.11 sqm, in floors etc, set and jointed in epoxy mortar and pointed in white or coloured cement to match including 20 mm thick screed bed in CM 1:6 all as specified.

M & L Coloured glazed ceramic tiles 300 x 200 x 7mm on vertical surfaces set & jointed in neat cement slurry and pointed in white cement mixed with pigment all as specified and as directed.

M&L for rendering 10mm thick in cement mortar 1:4 on backing coat of wall tiles etc complete all as specified and directed.

S&F in repairs for vitreous china squatting pan Orissa pattern of size 580 x 440 mm white with back inlet and integral footrest and anti syphonnage pipe including 'P' or 'S' trap and provn of lime concrete complete all as specified supplied and fixed in repairs.

S & F in repair Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand.

S & F in repair 32mm dia waste coupling of PTMT (half or full threaded) minimum weight 32mm- 45gns.

S & F in repairs pillar tap 15mm bore, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions.

S&F PVC connection 15mm size with PTMT nuts of length 450mm

S&F in repairs Unplasticised PVC pipes of pressure rating 10 kgf/cm2 of 50 mm bore fixed complete to walls, ceiling or in floors including bend and sockets etc; any type of pipe complete all specified and directed.

S&F in repair PVC valveless, syphonic action type, flushing cristern, 10 ltr capacity low level, white, with inlet, ball valve, float and handle including brackets

S&F Flush pipe of polyethylene of low or high density for low level cistern.

M&L for CI Nahani trap dia of outlet 75mm fixed in repairs including jointing to waste pipe in runlead fixed in cement concrete type B 1 (1:2:4).

S&F PTMT grating doom over Nahani trap and floor trap of 100mm Dia (Minimum weight 25 gms)

Taking down CI soil/waste/vent/rain water pipes including all fittings like shoes bends swan necks etc of any dia all as specified and directed.

S & F CI soil/waste/vent pipe in any length with ears 100mm bore (sand cast) in any length with cement joints fixed to walls with ss clamp fitting @1.5m c/c complete all as specified directed.

All as per item 32 above but except pipe.

S & F CI soil/waste/vent pipe in any length with ears 75mm bore (sand cast) in any length with cement joints fixed to walls with ss clamp fitting @1.5m c/c complete all as specified directed.

All as per item 34 above but except pipe.

S & F CI bends (any radius) for soil/waste pipes 100mm bore diminishing pieces or tapers on walls complete all as specified.

S & F CI bends (any radius) for soil/waste pipes 75mm bore diminishing pieces or tapers on walls complete all as specified.

S & F CI branch piececs single (equal or unequal) ordinary or inverted (spigot or socked type) with parallel branches for 100mm bore pipe (Y or T) all as specified and directed.

S & F CI branch piececs single (equal or unequal) ordinary or inverted (spigot or socked type) with parallel branches for 75mm bore pipe (Y or T) all as specified and directed.

S & F 100mm cast iron sanitary connection socket to fit WC out-let.

S & F PVC (SWR) pipes 160mm bore single socketed in any length with rubber ring joints fixed to walls with ss clamp fitting @1.5m c/c including taking down unserviceable ore.

S & F PVC (SWR) bends 160mm bore any radius

M&L Plain aluminium sheeting 0.56 mm thick fixed as in crumple section in repairs.

Complete removal of existing treatment, preparing surfaces, plastered or unplastered old surfaces priming plastered and other surfaces with alkali-resistant priming paint and applying two coats of distemper oil bound, white or tinted on walls incl a coat of white cement putty all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Supplying & fixing Framed work such as grills, gratings,plane or chequered plates etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165

M & L for preparation of new steel surface of any description over 10 Cm width or girth and applying two coats of synthetic enamel paint over one coat of redoxide primer complete all as directed.

M&L for applying one coat of synthetic enamel paint including preparation of old wooden surfaces over 10cm width/girth all as specified and directed.

M&L for taking out/removing vegitation growth or shrubs and injecting chemical GLYPHOSPHATE 41% SL 20 ML or till refusal by making cut/injection in the stem of plants 30 mm c/c and spraying with solution (25 ml GLYPHOSPHATE 41% diluted with one lit of water) and removing the plants/vegitation growth completely dead, including necessary scaffolding, julas etc complete as per manufacturer of chemical Biostadtlndia Ltd or equivelent approved by GE.

Removing demolished material outside MD land all as specified and directed exc 1.5 but not exc 05 km

(Note:- For item No 1 to 49 Work to be carried out at G+14 bldg including top roof,parapet and shaft walls with scaffolding & safety measures in repairs and in patches).

AAGAM ENTERPRISES (BID ID -3122978)

P LAXMI AND CO. (BID ID -3111382)

ASHOKA TRADING CO. (BID ID -3111822)

SAHU AND SAHU CO. (BID ID -3110847)

SHREE JAGDISH FURNITURE CO. (BID ID -3106695)

M/S V N ENTERPRISES (BID ID -3123896)

I.J Enterprises (BID ID -3123813)