PROVISION OF PAVED AREA, GUARD ROOM WITH ASSOCIATED FACILITIES AND

Amount

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in Soft/loose soil complete all as specified and directed.

Excavation of post holes in hard and dense soil each n.exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm, watering, levelling and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed.

Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out complete all as specified and directed.

Returning, filling in, including spreading, levelling, waterning and well ramming in layers n.exc 25cm thick complete all as specified and directed.

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Material and labour treating the bottom and sides of excavation at the rate of 5 litres of emulsion per sqm of surface area complete all as specified and directed.

Material and labour treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per sqm of vertical surface (Area of the substructure in contact with backfill to be measured) complete all as specified and directed.

Material and labour treating the top surface of filled earth at the rate of 5 litres of emulsion per sqm of surface complete all as specified and directed.

Treating the soil under plinth protection at the rate of 5 litres of emulsion per sqm of surface area complete all as specified and directed.

Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.

Material and labour for PCC (1:5:10) type E2 as in foundation (40 mm graded agg) as in foundations, filling on mass concrete for Post holes, Pillars,columns complete all as specified and directed.

Material and labour for PCC (1:2:4) type B2 as in foundation (40 mm graded agg) as in foundations, filling on mass concrete Post holes, Pillars,columns complete all as specified and directed.

Supply and fix Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St.-240 complete all as specified and directed.

M&L for 12 mm thick Gypsum board false ceiling fixed with counter sunk screws on and including GI frame work comprising GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to sorrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.90mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at apprx 900 mm centre to centre with GI cleat and steel expansion fastener with and including ceiling section (n exc 1.20 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across intermedate at 457mm centre to centre at desired heights below roof slab, including two coats of plastic emulsion paint (approved colour) over a coat of primer on exposed surfaces of ceiling boards complete all as specified and directed.

Material and labour for preparing new or previously untreated surfaces, of steel and iron work of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Supply and fixing painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.45 - 0.48 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fixing Plain, galvanised, mild steel sheeting 0.80mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of Zinc coating 275 complete all as specified and directed.

Material and labour for PCC 1:4:8 type D2 (using 40mm graded stone aggregates) as in foundation concrete complete all as specified and directed.

Brick work with sub class 'B' bricks straight or curved on plain.exceeding 6m mean radious built in cm 1:4 for Bldg work, manholes weep holes etc complete all as specified and directed.

15mm thick rendering on fair faces of brick masonary or concret surfaces in cm 1:4 finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 15 mm thick in CM 1:6 on fair faces of the brick masonry surfaces and finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for MS TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending,spirally for hoping for columns, beams hooking end and binding with and includingl mild steel wire (annealead) not less than 0.9mm dia complete all as specified and directed.

All as per item No 20 above but 5mm to 10mm dia in stirrups complete all as specified and directed.

Supply and fixing 35mm thick precast RCC jallies 1:2:4 type B0 (using 12.50mm graded snone agggregates) as in ventilators (measured solid) including all mouldings but excluding frame set in CM 1:6 complete all as specified and directed.

Material and labour Plain cement concrete 1:2:4 type B-1(using 20mm graded crushed agg) as in benching,bed plates coping and the like including provision of form work and finishing all exposed surfaces of concrete complete all as specified and directed.

Material and labour Hardcore of gauge n.exc 63mm broken stone aggregate deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

Material and labour for 100mm thick PCC 1:4:8 type C2 (using 40mm graded stone aggregates) as in base course to floor finish complete all as specified and directed.

Material and labour for 25mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregates) as in base course to floor fishes finished even and fair complete all as specified and directed.

Material and labour for 100mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregates) as in floor fishes finished even and fair complete all as specified and directed.

Material and labour Vitrified Ceramic tiles 10 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick cement screed bed in cm 1:6 complete all as specified and directed.

Material and labour non skid coloured ceramic tiles Square/rectargolar area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm, 7 to 8mm thick.in floors over 15mm thick cement screed bed in cm 1:6 set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed.

Material and labour glazed coloured ceramic tiles 350 x250x 7 mm/ 450x 350x7 mm thick as in verticle surfaces etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 cm thick screed bed in cm 1:4 complete all as specified and directed.

Supply and fixing factory made PVC internal door frame of the size 100x45mm with a wall thickness of 5mm, made out of extruded 5mm thick prelam sheet, mitred cut at two corners and jointed with 2 nos. of 150mm long brackets of 15mmx 15mm MS tube. The two vertical door profiles are to be reinforced with 40mmx20mm MS tube of 19 gauge through out the frame. The door frame shall be fixed to the wall using 65/100mm long MS Screws through the frame by using PVC fastners. A minimum of 4nos of screws to be provided for each vertical member & minimum 2 Nos for horizontal member etc. complete as per manufactures complete all as specified and directed.

Supply and fixing 35mm thick factory made solid PVC Moulded door shutter, consisting of solid core single leaf flush door of 30mm thickness, lipped with 15mm(5mmx3) thick 30mm width on the other stiles & bottom rails. The inner panel laminated with 2mm thick termite proof and fire resistant moulded PVC sheet with 2,4 or 6 raised panel design in different plain and / OR prelam colours on one side after routing the moulded design on flush door & 2mm thick plain and/ OR prelam PVC sheet on the other side using rubber adhesive on flush door & solvent cement adhesive on the PVC lipping etc complete all as specified and directed, manufacture’s specification and drawing (Total the quoted rate including builders hardware such as 100mm size SS hinge-03 Nos fixed with SS screws, Al door handle 150mm-02 Nos, Al Tower bolts 150mm -02 Nos and SS sliding door bolts 250mm-01 Nos) complete all as specified and directed.

Supply and fixing Rotational moulded polyethylene water storage tanks 1000 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

Supply and fixing 20mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipes complete all as specified and directed.

Supply and fixing 20mm bore gun metal gate valves, with iron wheel head , screwed both ends for iron pipes complete all as specified and directed.

Supply and fixing of 15mm dia tube medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

----Ditto---- all as per item No 36 as above but 20mm bore complete all as specified and directed.

Supply and fixing fancy type Bib taps, cast copper alloy 15mm dia with capston head handle, screwed down, screwed for iron pipe complete all as specified and directed.

Supply and fixing Fancy type Stop valves 15mm bore, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply and fixing Vitreous china urinal bowl type, white of size 465x355x265mm (min) complete including providing and fixing plugs, bedding urinals against walls in CM 1:2, screwing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement, fixing flush pipe, grating and union for discharge pipe complete all as specified and directed.

Supply only PVC 50mm dia flush pipe any lenth fixed to urinals complete all as specified and directed.

Supply and fixing Vitreous china squatting pan "Orissa pattern" white, size 580x440mm with integral foot rest including P-trap fixing to spoil pipe including fixing of flushing cistern and flush pipe complete all as specified and directed.

Supply only PVC flushing cistern, white, 10ltr capacity with 32mm dia flush pipe any lenth fixed to water closed complete all as specified and directed.

Supply and fixing Vitreous china wash basin, flat back, white, size 550x400mm including cutting for and pinning in for brackets and 15mm bore CP pillar tap 32mm dia CP waste coupling, 32mm dia PVC waste pipe and connetion to drain pipe complete all as specified and directed.

Supply and fixing for 32mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

Supply and fixing 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joint anf fixing adhessive, fixed to walls complete all as specified and directed.

Supply and fixing 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in tranches or in floors complete all as specified and directed.

Supply and fixing 110mm bore PVC (SWR) bends complete all as specified and directed.

-----Ditto---- all as per item No 48 but 75mm bore complete all as specified and directed.

-----Ditto---- all as per item No 48 but 75mm bore with access door complete all as specified and directed.

Supply and fixing 75mm bore PVC (SWR) vent cowl complete all as specified and directed.

Supply and fixing 32mm bore HDPE pipes of pressure rating 6kgf/cm2 fixed complete to wall or in floor complete all as specified and directed.

Supply and fixing PVC (SWR) floor trap 75mm dia of outlet including grating and jointing with solvent cement complete all as specified and directed.

Supply and fixing PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and directed.

Material and labour for 75 mm thick PCC ( 1:3:6) type C-2 using 40mm garde stone agg as in plinth protection etc finished even & smooth without using extra cement complete all as specified and directed.

Supply and fixing Towel Rail 600mm long of brass chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

Material and labour Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggr) as in bed to drain pipes including packing under and hunching against the sides of pipe after they are laid and tested for 150mm dia SGSW pipe complete all as specified and directed.

Material and labour Salt glazed stone ware (SGSW) grade "A "drain pipe 150mm internal dia laid in trenches on concrete bed and jointed complete all as specified and directed.

Material and labour Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in foundation, manhole and mass fiiling of the manholes complete all as specified and directed.

Providing precast cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) in manhole cover slab etc placed including necessary from work complete all as specified and directed.

Material and labour for RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in Bands , Beams, cantilevers, bressummers lintels over 1.5m span complete all as specified and directed.

Formwork to sides and soffits of , bressummers lintels, rough finished complete all as specified and directed.

Material and labour Preparation of new plastered or un plastered surface of walls and applying two coats of exterior emulsion paint including a coat of primer over 1.5mm thick birla wall care putty on walls complete all as specified and directed.

Material and labour Preparation of new plastered or un plastered surface of walls and applying two coats of oil bound distemper over a coat of primer on walls over 1.5mm thick birla wall care putty complete all as specified and directed.

Supply and fixing 8mm thick corner shelf of glass , edges (quarter circle type) 30mm radius at corner of walls of bath with CP brackets fancy type complete all as specified and directed.

Supply and fixing 15 mm dia brass chromium plated pillar tap, for mixing hot & cold water with capstan head screwed for 15 mm bore of pipe complete all as specified and directed.

Supply and fixing PVC connection 15 mm bore 450 mm long with 2 Nos PTMT nuts with washer complete all as specified and directed.

Supply and fixing brass chromium plated shower rose 125 mm size swivel type complete all as specified and directed.

Supply and fixing fancy type Stailess steel finished curtain rod of with both side brackets, roller hungers etc complete all as specified and directed.

Supply and fixing openable window manufactured from rolled formed sections made of galvanized steel ,colour coated/powder coated (base steel as per IS 513 D quality, galvanized as per IS 277 with Zinc of 120 grams/Sqm), with separate shutters for glass(out side opening) & fly proofing (inside opening ) and MS guard bars in between. The section for the window outer frame (and mullion if required) should be of 72mm X50mm. The Section for glass shutter should be 47mmX20mm, and glass shall be fixed with EDPM gasket all round the glass. The Section for fly proofing should be 40mm X20mm. Thre Section for glazed shutter and fly proofing shutter sholud be cut to length and miter joined with polypropoline corner brackets, mullion joined with frame using nylon cap. Spoon profile should be used around the fly mesh to fix mesh in the mesh shutter.Fly proof mesh shall be of 304 grade stainless steel with 32 gauge steel wire having 144 holes in one suare inch.Glass shall be 5mm thick plain sheet glass. Guard bars should be provided with 10mm square bars at 100mm centre to centre and welded to Flat iron frame of 12X6mm thick and powder coated and fixed to main frame with screws. Accessories : Each glazed shutter should be provided with SS pivot hinge - one set per shutter, Aluminum powder coated handle-one per shutter. Fly proofing shutter should be provided with SS pivot hinge - one set, ploypropoline handle-one per shutter, 75mm aluminum tower bolt -one per shutter. All the window sections are powder coated with pure polyeaster powder upto 50 microns thick. Make- M/s NCL seccolor-Eco 4000 series window/ventilators or equivalent .

Supply, laying, fixing and commisioning of polyethene septic tank of suitable capacity for 5 to 10 users at site including necessary excavation, RFR, disposal of spoil, foundation required for the tank with inlet, outlet ,vent pipes , man holes with covers etc complete for the functional requiremnet of septic tank complete all as specified and directed.

Material and labour Ready mix concrete using 40mm graded stone aggregate as in 100mm thick in pavement/hard standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and directed.

Material and labour Forming Contraction (Dummy) joints 150mm deep x 10mm wide, filled with sealing compound Grade `A` complete all as specified and directed.

Prepration of newly plastered surface of walls and applying three coat of white wash complete all as specified and directed.

Supply and fixing framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete confirming to Fe- 290 (Gde-165)

Supply and fixing Purpose made butt hinges conforming to Fe -290 Gde E-165 suitable for fixing to stone/ concrete door and window frames complete all as specified and directed.

Material and labour for of point wiring with PVC insulated unsheathed multi stranded, single core, FRLS type, copper conductor cable of size 1.5 sqmm 1100 Volts including one run of PVC insulated unsheathed multi stranded, single core, FRLS type, copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly, in and including PVC concealed conduit medium grade ISI marked and its accessories including provn of new galvanised MS sunken box and new hylum sheet of suitable size for housing the switches, sockets & fan regulators for the following:- Make:-RR/ HAVELLS/ POLYCAB.

One light/fan point controlled by one No, one way switch complete all as specified and directed.

5 Amp socket outlet point controlled by one nos, one way switch on same board complete all as specified and directed.

5 Amp socket outlet point controlled by one nos, one way switch on independent board complete all as specified and directed.

All as per item No. 80.00 here in before but with 2.5 sqmm (for phase & neutral) and 1.5 sqmm (for continuous earth wire) cable for one 15/16 Amp socket out let point on independent board complete all as specified and directed. Note for item No 80.00 & 81.00:- (i) Cutting chases for conceated conduit and making good in cement mortar is deemed including in unit rate. (ii) No cutting shall be done in the roof for laying PVC conduit for ceiling point wiring. In this specified portion wire shall run through the existing conduit or surface new conduit shall be provided as required. (iii) In case the wiring is encountered with any beam/column, then the wiring will run on surface to avoid any damage to the RCC portion.

Supply and fixing switch, piano flush type, one way, SP, 5 Amps, 230 volts grade complete all as specified and directed. Make:-Anchor/ Cona/ Indoasian.

Supply and fixing switch, piano flush type, one way, SP, 15 Amps, 230 volts grade complete all as specified and directed. Make:-Anchor/ Cona/ Indoasian.

Supply and fixing socket out let, piano flush, 5 Amps, 230 volts grade, 5 pin type complete all as specified and directed. Make:-Anchor/ Cona/ Indoasian.

Supply and fixing socket out let, piano flush, 15 Amps, 230 volts grade, 6 pin type complete all as specified and directed. Make:- Anchor/ Cona/ Indoasian.

Supply and fixing flame proof switch 230/250 volts grade one way (as catered in point wiring above) of SP 5 Amp rating complete all as specified and directed.

Supply and fixing flame proof switch sockets & plug combined in LM6 cable termination box in LM,16A,250V,2P+E complete all as specified and directed.

Supply and fixing ceiling rose 3 terminal / PVC/ Polycarbonate, insulated body complete all as specified and directed. Make:- Anchor/ Cona/ Indoasian.

Supply and fixing electronic ceiling fan regulator, step type 230 volts, single phase complete all as specified and directed. Make:- Anchor/ Cona/ Indoasian.

Material and labour for submain wiring with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 4 sqmm complete drawn in and including medium grade rigid non metallic PVC concealed conduit and its accessories along with 1x 2.5 sqmm PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type for continuous earth wire and duly connected to common earth dolly complete all as specified and directed.

Supply and fixing factory made sheet steel distribution boards, double door, SPN, 8 way, concealed type, 240 volts AC with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing complete all as specified and directed. Make:- Legrand/ Havells/ Standard.

Supply and fixing MCBs, SP, 6-32 Amps, 10 kA rupturing capacity complete all as specified and directed. Make:-Legrand/Havells/Standard.

Supply and fixing MCBs, SP, 40/63 Amps, 10 kA rupturing capacity complete all as specified and directed. Make:- Legrand/Havells/Standard.

Supply and fixing MCBs, SPN, 40/63 Amps, 10 kA rupturing capacity acomplete all as specified and directed. Make:- Legrand/Havells/Standard.

Material and labour for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 meter deep below ground level) with the top edge of earth plate at a depth not less than 1.5 meter below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI strip 25x4 mm bolted (with GI nuts, bolts & check nuts) and riveted to earth (Plate) electrode at one end and connected to main switch board / test point at the other and watering GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode and 40 mm GI pipe light grade for earth strip protection complete with earth pit in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work in any type of soil, returning filling in and removal of surplus soil complete all as specified and directed.

Material and labour earth continuity conductor or main earthing lead fixed to wall on batten or reccess or chases or burid in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing as required 25x4 mm galvanised iron strip complete all as specified and directed.

Supply and fixing LED Tube Light of 20/22/24 Watt 230Volt(size 4 ft) , box type complete with LED Tube Light 20 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified and directed. Make-CG Cat Part No.-LCCLB24-CDL,Havells Cat Part No-LHWEBP7IN1W020,Halonix Cat Part No-HLB-03-40-CW-AL

Supply and fixing in replacement LED Tube light fitting 9/10 watt ( 2 ft ) white 230 Volt AC complete including connecting up with three core twisted flexible copper conductorr cable complete all as specified and directed. Make : CG Cat Part No LCCLB08-CDL, Halonix Cat Part No-HLB-E41-03-10-CW-AL, Havells Cat Part No-LHEXBQP7IN1W009.

Supply and fixing of 2x2 Panel light surface mounted LED light of 36 W fixture with opal diffuser to give glare free light including suitable LED light of 36 W complete all as specified and directed. Make:CG Cat Part-LCTLSN-36-CDL or Equalivalent of Philips/Havells.

Supply and fixing LED suspended linear in sleek design Light of 36 Watt 230Volt(size 4 ft) , box type complete with LED Light 36 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified and directed. Make: CG cat part no.-LCLP54-36-CDL or equivalent in Havells/Philips.

Supply and fixing LED flame proof Tube Light of 8 Watt 230Volt(size 4 ft) suitable for gas group of IIA & IIB and zone1 & IP65 protection, box type complete with LED Tube Light 20 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified Make : Cat Part No. -EXTN1LT8/ Crompton/Philips/Havells.

Supply and fixing of Building security light fitting 25 watt outside the building including GI bracket of suitable size,fixing with clamp all as specified & directed Make:-CG Cat No-LSTS-25-CDL/Havells/Philips.

Supply and fixing LED bollard luminaire 10 watts, inverted pyramid tripod type with soft 360 degree light out door type having resistant to corrosion with better optics for uniform distribution complete with suitable driver & fixing nuts, bolts & washers complete all as specified and directed. Make:-Crompton Greaves Cat part No LBLSN-10-CDL or equivalent in Philips / Bajaj.

Supply and fixing LED Bulkhead fitting of 10Watt 230Volt , complete with LED e Light 10 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified and directed. Make- CG Cat Part No.-LBHP-10-CDL, equivalent in Havells/Philips.

Supply and fixing PVC XLPE copper cable 16 Sqmm 4 core for connecting bollard light to DB on wall/ceiling complete with exc complete all as specified and directed. Make: Polycab/Havells/RR.

Supply, laying and testing UG cable XLPE Insulated 1100 Volts ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core on wall/ceiling complete all as specified.

S&F of factory made load line DB's double door made out of 2.15 CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 4 way VTPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB 4 pole 100 Amp,25KA as incomer & MCB SP 6/10/32/40 Amp of 10 KA capacity of 16 Nos as out going complete all as specified and directed. Make:-Legrands/Havells/Indoasian.

Supply and fixing MCCB, 4 pole, 415 volt of capacity 160-200 amp, breaking capacity not less than 36 KA , Icu=100% Ics thermal magnetic type adjustable type 80 to 100 % confirming to IEC-60947-II, IS-13947-II , including thimbles, nuts, bolts ,washers etc and connections, replacement of thimbles, minor parts like nuts bolts washer etc. all as specified and directed. Make : Legrands Cat Part No 5077 45 or equivalent Schnieder/L&T.

Supply and fixing of fan wall mounting , air circulating fans 230 Volts single phase oscillating 450 mm sweep suitable for wall mounting all specified and directed. Make:-CG Cat No.-AC450WALL1 or equivalent in BAJAJ/USHA

Supply and fixing of ceiling fan 5 star rating (Opal white) economy range high speed having full copper motor & ribbed alluminium blades for higher air delivery,power coating provides longer life complete with accessories 230 volts 1200 mm sweep,300 RPM with air delivery 255/265 Cum/min including making arragement to hanging of fan to ceiling with proper hook nut bolts all as specified & directed. Make:Havells Fan 1200mm ES50 or equivalent in CG,USHA .

Supply and fixing of desert Air cooler 70 litres,with trolley,powerful fan,3-side cooling pads,whiper quiet performance & low power consumption(white) 240V, 50 Hz single phase AC supply including cutting chasing for making opening hole of suitable size for fixing on window/wall with nut, washer etc complete and necessary electrical connection to fan connecter with three core sheathed wire of required length catpart no symphony JUMBO 70. Make:- Symphony/Orient/Bajaj.

Supply and fixing of Metal exhaust fan 300 mm size suitable for 240V, 50 Hz single phase AC supply including cutting chasing for making opening hole of suitable size for fixing on wall with nut, washer etc complete and necessary electrical connection from ceiling rose to fan connecter with three core sheathed wire of required length catpart no Trans Air 12'' Make:- Crompton/Havells/Bajaj.

M/S SONU ENTERPRISES