CONSTRUCTION OF PANCHAYAT OFFICE BUILDING IN KALLUR AT KALLUR PANCHAYAT

Amount

1. CONSTRUCTION OF PANCHAYAT OFFICE BUILDING IN KALLUR @ KALLUR PANCHAYAT IN MINJUR PANCHAYAT UNION UNDER AGAMT -II /2025 - 2026/ RD/TVLR/MJR12

Earth work excavation for foundation in all soils and sub soils to full depth etc., ordinary soil complete

Supplying and filling in foundation, basement, etc with filling M.Sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supply and filling with excavated earth inluding all cost of conveyance etc,..completed

Cement Concrete 1:4:8 (One Cement, Four M.Sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification

Brickwork in cement mortar 1:5 mix using country bricks including cost and conveyance of all materials to site mixing, placing, curing and all labour charges etc. complete

FOR BELOW

FOR ABOVE

Centering for all RCC Works including cost conveyance and all labour charges etc. complete.

FOR BELOW

FOR ABOVE

Supply and fabrication of steel including cost and conveyance of all materials to site and all labour charges for placing in position etc. complete.

Reinforcement Cement Concrete 1:1-1/2:3 (One Cement, One and a half crushed stone M.Sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three M.Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers

FOR BELOW

FOR ABOVE

Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Providing Granolithic pattern floor finish with CC 1:2:4 mix using 10to 12mmchips metalincluding cost and conveyance and materials of all labour charges etc,.complete.25MMTHICK

Paving the floor Antiskid tiles of any colour and any size laid in CM 132 mix using 10mm thick and poiting with white cement 0.40kg per 10sq.mt mixed with colouring pigment including labour charges etc,.

Dadooing walls with glazed tiles of any colour and any size laid in CM 1:2 mix using 20mm thick and poiting with white cement 0.40kg per 10sq.mt mixed with colouring pigment including labour charges etc,.

Paving the Top of roof with Solar reflective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three M.Sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three M.Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty should be got approved by the Executive Engineer before use on work

Plastering with Cement Mortar 1:5 (One cement and Five M.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting two coats with approved colour and quality of enamel paint over the iron works including cost and conveyance of all materils to site and labour charges etc. complete.

Supply and delivery of Mild Steel doors fixing size of 1.20x2.10mt including cost and conveyance with transportion charges etc,.complete

Supply and delivery of Mild Steel Windows fixing size of 1.20x1.30mt including cost and conveyance with transportion charges etc,.complete

Supply and delivery of Mild Steel Windows fixing size of 1.20x1.30mt including cost and conveyance with transportion charges etc,.complete

Supply and delivery of Mild Rolling shutter fixing size of 1.20x2.10mt including cost and conveyance with transportion charges etc,.complete

Supply and delivery of Steel Gill Gate including cost and conveyance with transportion charges etc,.complete

Supply and delivery of Mild Steel doors fixing size of 0.75x2.10mt including cost and conveyance with transportion charges etc,.complete

Supply and delivery of Mild Steel doors fixing size of 1.00x2.10mt including cost and conveyance with transportion charges etc,.complete

Supply and Fixing of JCC Jolly

Supply and Fixing of Cudappa slab 20mm thick including all cost of conveyance etc,..completed

Supply and Fixing Rain Water Pipe 110mm Dia

Supplying and fixing in position best Indian make White glazed earthen ware Oriya type Indian Water Closet

Europeon Water Closet with all fittings and 10lit capacity flusing tank

Supply and Fixing of Wash Basin

Supply and Fixing of Sintex Tank 1000LTR including Fixing Charge

Provision for RWH Structure

Provision for Braille Singneges , Tactililes

ELECTRICAL ARRANGEMENTS :

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light / fan Point (for electronic regulator) (5 points per coil)

Supply and fixing of 4'-18W LED tube with fitting inclusive of all charges

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18")

Supply and fixing of WT bulk head fitting with guard suitable for 11W CFL lamp with CFL

Supply and Run of 2 of 2.5 sq.mm (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade on 7/20 GI wire for service connection mains

Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains

Supply and fixing of 16A DP switch of 500V with matal clad with fuse and neutral (side handle) on suitable TW board with earth connection only

Supply and fixing of 3 Nos. 5A (3 pin and 2 pin) combined flush type wall socket with control switches concealed in suitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket)

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch concealed in suitable MS box in flush with wall

Earthing as per PWD standard with an earth electrode of 2 metre Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work

Provision for EB Deposit Charges

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

osandco (BID ID -1304597)