Provn of Visitor room and shed over main gate at DIPAC Under AGE(I) (U)(B/R) Delhi Cantt .

Amount

Item No.1 M&L for excavating in trenches, not exc1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out, in soft/loose soil, complete all as specified .

Item No.2 M&L for Plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in floors, foundations, filling & mass concrete, complete all as specified .

Item No.3. M&L PCC 1:2:4 (nominal mix) Type B-1 using 20mm size aggregate as in foundations complete all as specified and as directed .

Item No.4 M&L RCC M-25 Design Mix, using 20 mm graded aggregate as in foundation, including rafts footing ,foundation beam , plinth beam etc.all as specified and directed.

Item No.5 M&L RCC M-25 Design Mix, using 20 mm graded aggregate as in Column complete all as specified and directed .

Item No.6 M&L RCC M-25 Design Mix, using 20 mm graded aggregate as in Slab of any thickness above top of footing including pilasters and buttress complete .all as specified and directed.

Item No.7 M&L RCC M-25 Design Mix, using 20 mm graded aggregate as in beam complete all as specified and directed.

Item No.8 M&L for Formwork to sides of concrete foundations, footings, bases of columns, rafts raft beams, sides and soffits ( if any ) of foundation and plinth beams; and similar work; vertical or batter, finished rough surfaces of concrete, complete all as specified and directed.

Item No.9 M&L Formwork to sides of pilars post, struts piers , coloumn and stanchion of square , rectunglar or polugonal shape for rough finished surface of concrete complete all as specified and directed

Item No.10 M&L for Formwork to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exc 200mm thick ( horizonla or sloping) for rough finished surface of concrete complete all as specified and directed

Item No.11 M&L for Formwork to sides and soffits of floor or roof beams , beam haunching girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc complete all as specified and directed

Item No.12 M&L for formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed

Item No.13 Returning , filling in incl spreading levelling and well ramming and watering in layers n exc 25 cm complete all as specified and directed

Item No.14 Removing excavated material soil to a distance exc 250 m but not exc 500 m and deposited where directed complete all as specified and directed

Item No.15 M&L for TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips,complete all as specified and directed

Item No.16 All as per item no 15 above but 5mm dia and over and upto and incl 10mm dia in stirupps spacers and binders complete all as specified and directed

Item No.17. M&L hardcore of broken stone or boulders of guage n.exc 63 mm deposted, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as speciffied and directed

Item No.18. M&L for cement concrete type C-1 (1:3:6) ( 20 mm graded aggregate) as in plinth protection complete all as specified and directed

Item No.19. M&L Vitrified jointless Ceramic light shade tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match flooring( in any pattern) and jointed with coloured cement matching with surfaces of tiles as in floor 15 mm thick cement screed in CM 1:6 and pointed with coloured cement matching with surfaces of tiles as in floor complete all as specified and directed .

Item No.20. All as per item No 19 but in vertical surfaces over 10mm screed in CM 1:4 complete all as specified and directed complete

Item No.21. M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius in cement mortar 1:6 complete all as specifed and directed

Item No.22. M&L for 15 mm thick rendering on fair faces or brick work or concrete in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed

Item No.23. M&L for 10 mm thick rendering on fair faces or brick work or concrete in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed

Item No.24. M&L for 5mm thick rendering in cement mortar 1:3 finished even and smooth without using extra cement on concrete surface in ceiling complete all as specified and directed

Item No.25. M&L preparation of new plasterd or unplastered concrete surfaces and apply two coat of cement base paint over a coat of primer complete all as specified and directed

Item No.26. M&L for preparation of newly plastered surfaces of wall & apply two coats of oil bound distemper over 1mm thick wall care putty complete all as specified and directed

Item No.27. M&L for preparation of newly plastered surfaces of ceiling l & apply two coats of oil bound distemper over 1mm thick wall care putty complete all as specified and directed

Item No.28. M&L for 20 mm thick granite ( of any type ) work (table rounded and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in 15mm thick cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixer of pigment to match with shade of granite complete all as specified and directed

Item No.29. S&F powder coated aluminium three track sliding windows with three sliding shutters (one gauzed shutter including 0.36mm dia and 1.18mm aperture stainless steel wire mesh and two glazed shutter including 4 mm thick plane glass panes) made of aluminium sections not less than 1.1kg per meter for bottom and top tracks, side track 0.98 kg per metre, bottom shutter frame 0.55 kg per metre, top shutter frame 0.47 kg per metre, shutter sides 0.47 kg per metre and interlock sides 0.45 kg per metre including suitable nylon beading, channel, gasket, nylon rollers, Maruthi lock with handles etc complete all as specified and directed.

Item No.30. S&F Powder coated aluminium doors using 96.6 mm X 44.8 mm X 1.60 mm aluminium chowkhat, with 84 mm X 44.7 mm X 1.60 mm section vertical stile, with 101.60 mm X 44.8 mm X 1.60 mm rail mounted on floor spring with mortice lock (Make- Harrison), with aluminium tower bolts 150 mm long (02 nos), sliding bolt 300 mm long (01 no), door handle 150 mm long (02 nos) and fittings all as directed by Engr-in-Charge. Bottom panel with 12 mm thick laminated nova pan and top panel with 5.5 mm thick plain/froasted sheet glass with rubber beading of suitable size, complete all as specified and directed by Engr-in-Charge.

Item No.31. S&F aluminium anodised powder coated partition as all of aluminium section 100mm X 44mm X 2mm thick frame rectangular section & panel of 5mm thick PVC sheet in top & bottom pannel & 5.5mm thick sheet glass in middle panel with rubber linning & aluminium beading around length necessary fixing arrangements for bottom & top member of aluminium frame in floor / PCC /brickwork as per site requirement with rawl plug etc including chromium plated steel screws 60cm c/c including taking down old aluminium partition, complete all as specified.

Item No.32. S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing ( beam, tee angle, channel or flat sections) including distances pieces, cleats, main posts etc using Fe 410-W(Grade E 250) quality A complete all as specified and directed

Item No.33. S&F Plates ( Plain or chequred) channels, squre cut or notched ( ordinary and counter sunk) forming holes, with riveted, bolted or welded attachement complete all as specified and concrete

Item No.34. M&L for holes drilled up to dia 12 mm and not exc 25 mm dia and countersunk if required up to depth exc 2 mm but not exc 12 mm complete all as specified and directed

Item No.35. Demolition (unreinforced) cement concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and directed.

Item No.36. M & L applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 Kg per sqm including cleaning surfaces complete all as specified and directed.

Item No.37. S&F mild steel 25 mm dia rag or lewis bolts, screwed one end with hexagonal or square nuts and washehers, the other end enlarged and jagged or lewished exc 30 cm long fixed with RCC foundation complete all as specified and directed

Item No.38. M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame asper specifi-cation and drawing.

Item No.39. S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and directed by the Engineer-in-Charge.

Item No.40. S&F APP polymeric water proofing membrane minimum 3mm thick and wieghing not less than 3.5 Kg per Sqm , black finish reinforced with non woven polyester matt with a thermo fasable finish laid over a coat of bitumen primer @ 0.5Kg/Sqm by torching application with a propane or a butrane gas torch with an overlap of 100mm at the sides and 150mm at the ends and incl applying a coat of cold emulsion bitumenus primer all as per manufacturers instructiions incl preparation of surface complete all as specified and directed. Note The water proofing treatment shall be got carried out by manufactorer or their authorised applicators complete all as specified and directed.

Item No.41. M&L 40 mm thick brick tile laid on 15mm thick screeed in cement mortar 1:6 and jointed & pointed in CM 1:3 with 5% of linseed oil by weight of cement in cement mortar etc complete all as specified and directed.

Item No.42. S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling screws or cranked bolts other necessary fittings,all as specified and directed by Engr-in-Charge.

Item No.43. M&L for preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as directed

E&M ( INTERNAL WIRING )

Item No.21 M&L for point wiring complete with , standard copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in and including concealed PVC conduit medium grade and sunken new pressed steel terminal boxes of required size factory made and factory painted with stove enameled black paint with top cover 3 mm thick plastic/laminated sheet of required color with brass screw and cup washer with all accessories including 1.5 Sqmm standard copper conductor PVC unsheathed cable earth and connected to earth dolly complete all as specified for following : Note:- the rate is inclusive cutting /chasing and making good the disturbed surface with cm 1:3 and same surface finishes with the adjoining surface of disturbed area with OBD/colour wash/white wash etc complete all as specified and directed.

(a) One light /fan/Bell point controlled by one way switch complete all as specified and directed.

(b) One 3 pin socket outlet 5/6 amps same board with other switches complete all as specified and directed.

(c) One 3 pin socket outlet 5/6 amps controlled by one way switch on independent board complete all as specified and directed.

Item No.45 M&L for Point wiring with 2.5 sqmm, single core ,PVC insulated, unsheathed FRLS cable, 1100 volts grade, IS -694 marked, with multi stranded copper conductor and earth continuity copper conductor cable of 1.5 sqmm connected to common earth dolly drawn through and including rigid PVC conduit of suitable size along with fittings and accessories, fixed /laid/concealed in walls/ceilings including cutting chases and making good to walls, floors etc., and also including suitable modular bottom sunk type pressed steel terminal box and suitable modular top cover with frame and No of modules for 15/16 Amps multi purpose socket combination controlled by one, one way switch on independent board complete all as specified and directed. Notes for item No.s 44 to 45 (i) In case the wiring is encountered with any beam/column, then the wiring will run on PVC casing/caping to avoid any damage to the RCC portion. (ii) No cutting shall be done in the roof for laying PVC conduit for ceiling fan point wiring. In this specified portion wires shall run through the existing conduit or surface. (iii) Cost for cutting, chasing and making good to existing surfaces shall deemed to be included in the Quoted Rate.

Item No.46 S&F modular switch one module, 5/6 amps one way, SP, 230 voltsAC,complete all as specified and as directed . Make : Anchor/Cone/ Crabtree/Legrand

Item No.47 S&F modular switch one module, 15/16 amps one way, SP, 230 volts AC,complete all as specified and as directed . Make : Anchor/Cone/ Crabtree/Legrand

Item No.48 S&F modular socket outlet 2 in 1 , 3 pin suitable for 5/6 Amp and 3 pin suitable 15/16 Amp combined, two module, 230 volts AC,complete all as specified . Make : Anchor/Cone/ Crabtree/Legrand

Item No.49 S&F modular socket outlet 5/6 amps 2 in 1 ,2 & 3 pin Combined, two module, 230 volts AC, complete all as specified and as directed by the Engineer-in-Charge. Make : Anchor/Cone/ Crabtree/Legrand

Item No.48 S&F ceiling rose PVC/ Polycarbonate isolated body 63.5x23.5mm, 3 terminals,complete all as specified Make : Anchor/Cone/ Havells

Item No.49 M&L for sub main wiring with two runs of single core 4 Sqmm (nominal area) PVC insulated copper conductor FRLS( conforming to IS -694) stranded, unsheathed, 1100 volts grade in PVC conduit (heavy grade) of 20 mm dia with all fitting and accessories surface type including one run 4 Sqmm single core unsheathed stranded copper conductor cable FRSL( Conforming to IS -694) as earth wire, complete all as specified and as directed . Note : ( i) Two runs of cable with one run earth wire and PVC Conduit shall be measured as one unit. (ii) Extra length of cable required for connection to DBs shall be deemed to be included in the unit quoted rate and shall not be measured separately. (iii) Earth wire shall run inside the Conduit . (iv) suitable colour code of wire must be ensure for phase/neutral/earth. Make of cable : NICCO/FINOLEX/RR KABEL/HAVELL'S/POLYCAB Make of PVC Conduit :ANCHOR /FINOLEX/KALINGA/SUPREME/POLYCAB

Item No.50 Supply and fixing of MCB SPN 12 way, double door, 240 volts SPN Metalic Distribution board, concealed flush to wall for mounting MCBs factory made, conforming to IS: 13032 fabricated out of CRCA sheet not less than 1.20mm thick fitted with DIN channel, neutral link and 200 Amps rated bus bar DBs shall be semi glossy finished with epoxy polyster based power paint sprayed and backed at high temperature, between powder paint process to ensure smooth finish and protection against corrsion atmishpere. The DBs shall be double door type with hinged door with locking arrangement. The DBs shall be of same make as MCBs, DB shall also be provided with lable marking indicating the incloing and outgoin corcuits on all ways as specified, the DBs shall be of IP 42 protection class complete all as specified and directed. Make: L & T/ Legrand/ABB/Seimans

Item No.51 Supply and fixing sheet metal SPN enclosure with two pin and earth plug and socket completed with and incl one single pole MCB 20 amp ,SPN 240 volts complete all as specified and directed. Make: L& T/ Legrand/ABB/Seimans

Item No.52 Supply and fixing MCB SPN 240 volts 63 Amp current rating 'B' curve 10 KA breaking capacity with thermal over load as well as magnetic short circuit tripping device with quick break trip free mechanism robust design and terminals having heat resistant moulding complete all as specified and directed. Make: L& T/ Legrand/ABB/Seimans

Item No.53 ditto all as per item No. 52 above but MCB SPN 40 Amps complete all as specifed and directed Make: L&T/ Legrand/ABB/Seimans

Item No.54 ditto all as per item No. 52 above but MCB SPN 32 Amps complete all as specifed and directed Make: L&T/ Legrand/ABB/Seimans

Item No.55 ditto all as per item No. 52 above but MCB SP 6- 32 Amps complete all as specifed and directed Make: L&T/ Legrand/ABB/Seimans

Item No.56. Supply and fixing of LED Street light made out of pressure die cast Aluminium and matrix of power LEDs , in built electronic driver with upto 4KV Surge protection , in frame 45W mounted on MCPCB complete including connecting up to with three core flexible copper conductor cable from ceiling rose to fitting Make : CG modle NO LSTS-45-CDL -1/ Or equivelent to Bajaj .

Item No.57. Supply and fixing ceiling fan 1200mm sweep, BEE 5 star rating including fixing of down rod and connection complete including provision of flexible three core PVC insulated multi-stranded copper conductor cable of size 0.50sqmm from ceiling rose/connector to fan complete all as specified & directed. Model No. Metallic Beige-Brown/Pearl Ivory-Gold fusion 50 of Havells or bajaj/cromption..

Item No.58. M&L for bracket made out of GI tubing 40mm dia light grade bent to shape over all length 1.5 mtr long including MS clamps 2 nos made out of flat iron 40x4 mm with MS nuts and blots 75mm long 12mm dia 4 nos with 3 mm thick washers 2 nos for each including painting with aluminium paint over red oxide primer,all as specified & directed

Item No.59. Supply and lay 40mm bore GI tubing light grade, ISI marked, for cable protection at road crossing/floor/wall/ on poles or any indicated situation etc duly sealed at both end after drawing cable including necessary clamps, saddels etc all as directed and specifed.

Item No.60. M&L for Earthing complete with galvanised steel earthplate electrode 600mm x 600mm and not less than 6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead GI wire 4.0mm dia by means of bolts, nuts, check nuts and washers of GI/steel all as shown in electric plate No 3, of SSR Part -I connected to earth test point/MCB DBs all as specified and indicated, complete and including charcoal dust, salt etc. and GI protection pipe, medium grade 15mm dia, medium grade GI watering pipe 20mm, with funnel and wire mesh, 40mm thick pre-cast RCC, M-15(nominal mix) cover reinforced with XPM weight not less than 4kg/sqm with suitable handle of 6mm dia MS bar and angle iron 40 x 40x 3mm frame for cover, PCC M-15 (nominal mix) pit, excavation and earth work in any type of soil and connected all as specified and as directed by Engineer-in-Charge.

Item No.61. Supply and lay cable XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor, 1100 vots grade, cross-sectional area 10 sq. mm 2 Core laid in trench/wall/floor including necessary clamps/saddels, cable lugs, glands, accessories etc,all as directed and specifed.

Item No.62. Supply & fixing of basic all purpose surface and wall mounted LED light batten with polycarbonate housing & integrated electronic driver LED tube light fittings with 18 watts LED tube , 230 volt with and including all accessories, internally prewired and including connection up with twin core twist flexible copper coductor cable from ceiling rose to light fitting complete all as specified and as directed ( Make : Havells mode /cat part No LHEXBQP6IN1W018 or equivalent modle of make (philips/Crompton/Greaves)

GIAN ENGINEERS

Hira Singh and Sons

MRITUNJYA ASSOCIATES

SK Engineers