Repair to tiling, sunken slab treatment, roof treatment and other Misc Maintenance Works at Mountain Shadow under GE (AF) Borjhar.

Amount

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings including ridges complete all specified and directed.

Dismantling timber scantlings 40 Sqcm and over in section, in any position unframed work complete all specified and directed.

Material and labour for 2nd class hard wood in scantlings timber un framed and fixed clean sawn complete all specified and directed.

S & F for 0.50 mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet "colour" having tensile strength of 550Mpa as in roof covering /cladding to wall, fixed with self tapping screws and bituminous washers as in roof complete all as specified and as directed by Engineer-in-Charge.

S & F for 0.50 mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheet "colour" having tensile strength of 550Mpa as in ridge fixed with self tapping screws and bituminous washers as in roof covering/cladding to wall, valley gutter etc complete all as specified and as directed by Engineer-in-Charge.

S&F Aluminium tubular curtain rail pipe 20 mm dia all as directed by Engr-in-charge.

S&F Alu End Brackets for Aluminium tubular curtain rail complete all as specified and as directed by Engineer-in-Charge.

S&F Brass chromium plated tubular curtain rail pipe 20 mm dia complete fixed with brackets both ends, all as directed by Engr-in-charge.

S&F Brackets for brass chromium plated towel rail complete all as specified and as directed by Engineer-in-Charge.

Excavating post holes or similar holes, each not exceeding 0.5 Cu. M, getting out in Soft/ Loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50m & making good surface complete all specified and directed.

S & F steel work as in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS 1161 1979 grade St 240 complete all specified and directed.

Demolition of brick work or stone/boulder, masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but exceeding ashlar facing and pre-cast concrete articles complete all as specified and as directed

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre means radius built in cement mortar (1:4) complete all as specified and as directed by Engineer-in-charge.

Taking out cement plaster , any description , from brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed

M&L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4 mixed with water proofing compound, surface finished even and smooth complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately as supply only.

M & L 15mm thick rendering in cement mortar 1:6 on faces of brick work or concrete surfaces, finished fair and even complete all as specified and as directed

Material and labour for preparation of new plastered surfaces of walls and applying two coat of oil distemper complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

Taking out old existing treatment of any thick from RCC roof by scrapping/ scrubbing/ brooming down etc all as specified and directed.

M&L For 40mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in roof pedding etc finished surface even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge

M & L for rendering 15mm thick cement plaster with in cement sand mortar (1:4) mixed with WPC as per manufacturer instructions on other than fair faces of brick surface, finished even and fair without using extra cement over & including cement slurry @ 3 Kg per Sqm on existing roof surface complete all as specified and as directed by Engineer -in-Charge.

M & L for preparation and cleaned to plastered/concrete surfaces of roof applying the under mentioned course of roof treatment as given below :- (a) Applying evenly compactible primer @ 0.4 ltr per sqm over concrete/plastered roof surfaces. (b) Laying of APP based polymeric water proof membrane sheet of 3mm thick of weight not less than 3.6 kg/sqm with minimum longitudinal end over laps of 100mm and horizontal side laps of 75mm and joints shall be finally thermo-fused with help of LPG flame incl applying a coat of cold emulsion bitumen primer. ( c ) Applying bituminius grade aluminium paint over membrane @ 0.11 ltr per sqm . Make of membrane sheet:- Make- Sika/poly plast superior felt/hyper olast/bengal bitumen/STP. Note :- (i) Membrane sheet also laid along the parapet upto 30cm height & inserted inside the groove & laid over a coat of bitumen as specified here-in- before. The groove shall be closed with CM (1:3) mortar nothing extra shall be admissible on this account (ii) WPC shall be measured & paid seperately.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C-2, using 40mm graded stone aggregate as in hardstanding, surface finished even & fair without using extra cement complete all as specified and as directed.

M&L for Pre-polished chequered cement concrete tile 30cmX30cmX 25mm thick set jointed and pointed in neat cement siurry in floor with white cement and pig ments over 15mm thick screed bed or bedding layer of CM (1:6) complete all as specified and as directed.

Material and labour for 25 mm thick sand cushioning for laying interlocking paver block complete all as specified and directed.

Material and labour for Machine pressed precast concrete interlocking paver block glossy coloured any shape and size confirming to IS 15658-2006 of 60mm thickness , M-35 grade (With grey cement and Pigment complete all as specified and directed.

Dismantling of chain link fencing wire mesh & any type remove from site complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided all as specified and directed.

Dismantling of posts or struts (wood, steel or RCC), any section, including taking out embedded portion and making good disturbed ground; posts embedded in natural ground & remove from site complete all as specified and directed. Note : Only embedded portion will be measured .

M&L for PCC 1:3:6 type C1 using 20mm agg for fixing angle iron post etc all as specified and directed.

S & F mild steel work conforming to Fe 290.Gde-E-165 in posts & struts in swan neck angle including cutting top to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete all as specified & directed .

S & F for framed work of rolled mild steel conforming to Gde Fe 410-W (Gde -E-250) quality -A, as in doors or gates of angle or other section with gusset plates, rails, braces, etc, drilled for fixing of steel sheeting or other covering; doors etc to be prepared for hanging or sliding with and including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting, running rails & guides) and hanging, fastening & fixing complete.

S&F for chain link fencing 4mm dia GI line wires mesh size 75 X 75 mm and type to any type of standards, rails, straining bolts, etc confirming to IS-2721-1979, including provision of winding wires as in repair complete. Note :- 8mm dia round bars and FI shall be measured and paid separately.

M&L Preparation of new previously untreated steel and iron surfaces of any description not other wise described over 10 centimetre width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F in repairs PVC connection 15 mm dia 600mmm long with 2 Nos PVC check nuts with washer complete all as specified and directed.

S&F in repairs PVC connection 15 mm dia 450mmm long with 2 Nos PVC check nuts with washer complete all as specified and directed.

S&F Pillar taps,15mm dia fancy type with capstan heads,chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts,screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair pillar tap standard of PTMT any colour high pressure screwed for iron pipe of 15 mm bore and fixed (Minimum weight 15mm 110gms) complete all as specified and directed.

S&F in repairs 15mm dia of chromium plated Angle valves, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for and fixed complete all as specified and directed.

S&F in repairs of 15 mm bore stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair 15mm bore stop valve fancy type chromium plated cast (concealed) copper alloy screwed down high pressure screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge.

S&F in repairs 15 mm dia bib tap cast copper alloy CP fancy type with capstan head long body and cup screwed down for iron pipe all complete all as specified and directed.

S&F in repairs Bib taps 15 mm bore standard of PTMT high pressure screwed for iron pipe and fixed minimu all as specified and directed.

Repair to aluminum door shutter of any description including taking down and refixing with necessary adjustment to door spring/door closer, aluminum/rubber beading, glass pane etc complete all as specified and directed.

M&L for half brick work subclass “B” brick straight or curved on plan to any radius in built in cement mortar 1:4with complete all as specified and as directed.

Supply only water proofing compound (ISI marked) complete all as specified and directed.

S&F Chromium plated Soap Dish fixed to plugs with brass screws complete all as specified and directed.

S&F tubular towel rail,20mm dia, D type and 60cm long between flanges of brass chromium plated complete all as specified and directed..

S & F PTMT grating doom 100mm dia embedding in tiles with white cement all as specified.(Minimum weight 25 gms )complete all as specified and directed..

S&F for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

Hacking out old broken glass (any thickness, size, quality or description) from meteal frames , glazed with putty including punching or drilling out old glazing pins/spring clips and providing and fixing new on complite all as specified

S & F 3mm thick frosted sheet glass, ordinary quality and glazing with oil putty or with wooden beads area n exc 0.5 sq. m in each pane complete all as specified and as directed.

M&L for 3mm thick Sheet glass, ordinary quality and glazing with oil putty or with wooden beading are wooden frame or steel frame area n exc 0.5 sq. m in each pane complete all as specified and as directed.

Dismantiling of wall and ceiling boards (fiber, pulp, insulstion, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed

M&L for Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws fixed in celing flat or slope complete all as specified and directed

S&F of 605 x 606mm Anodised aluminium snap grid frame work for false ceiling all as specified

Dismantling of boarding, any description, fixed in any position with nails complete all as specified and directed.

S&F in repairs 20mm thick 2nd class hard wood boarding as in eaves board, planed on both sides with butt hinges, fixed with Screws/Nails complete all as specified and directed.

All as per Item No-60 here-in-before but fixing only copmlete all as specified and directed

M& L for applying two coats of synthetic enamel paint on new/old wooden surfaces of any description over 10cm in width or girth over a coat of pink primer including preparation of surface complete all as specified and directed

M/s Rawat Enterprises

M.S. Construction

M/s Beekey Seekey Traders

Anupam Das