CONTRACT FOR EMERGENCY SHEETING WORKS IN AMMONIA, UREA AND CENTRAL STORES AT RCF THAL

REMOVING G.I. OR A.C. SHEET ROOFING,CORNERS,APRONS PIECES AND STACKING THE OLD MATRIALS AS DIRECTED WITH ALL LEADS, LIFTS ETC. COMPLETE.

ERECTING & DISMANTLING SCAFFOLDING WITH CONTRACTOR'S MS PIPES & FITTING AS REQUIRED FOR APPROACH TO SYSTEM BY DOUBLE SCAFFOLDING, ETC. COMPLETE. SUPPORT UP-TO ALL HEIGHT

PROVIDING AND FIXING 8MM DIA.,STAINLESS STEEL (SS 304 GRADE), 'J" OR 'L' SHAPE HOOK WITH NUT AND WITH PLAIN SS WASHER & BITUMINOUS WASHER, FOR CLAMPING SHEETS TO PURLINS AS DIRECTED. RATE INCLUDES SCAFFOLDING / H-FRAME OR ANY TEMPORARY ARRANGEMENT REQUIRED FOR HOOK FIXING UPTO A HEIGHT OF 3M.

SUPPLYING, DE-RUSTING BY MECHANICAL CLEANING FABRICATING, ERECTING, HOISTING AND FIXING IN POSITION STRUCTURAL STEEL WORK IN ROLLED STEEL JOINTS, CHANNELS, ANGLES TEES, FLATS, PLATES, LATTICE MEMBERS BUILT UP / COMPOUND SECTIONS IN COLUMNS, PORTALS, GIRDERS, BEAMS, BRACINGS, TRUSSES, PURLINS, RAFTERS, STAIRCASE, STEPS, HAND-RAILINGS, WALKWAY, CAT LADDER WITH CAGES, TOE PLATES, SIDE WALLING, TRESTLES, CONVEYOR GANTRIES ETC. INCLUDING GUSSET PLATES, ANCHOR PLATES ETC., INCLUDING SITE AND SHOP FASTENERS, RIVETING, BOLTING, WELDING AT SHOP OR WORK SITE AT ALL HEIGHTS ETC. & INCLUDING ONE COAT OF RED-OXIDE PRIMER AND OVER IT TWO COATS OF CHLORINATED RUBBER PAINTING OF APPROVED QUALITY AND SHADE ETC. COMPLETE. (ALL MATERIAL SUPPLY IS IN CONTRACTOR’S SCOPE INCLUDING PAINTS (AS PER TS). (ISI MARKED MAKE STEEL TO BE USED) . NUT-BOLTS TO BE PAID EXTRA IN RESPECTIVE ITEM.

HIRING CHARGES FOR DIESEL OPERATED , TRUCK (CHASSIS) MOUNTED ARTICULATE BOOM LIFT WITH OPERATOR. SHIFT OF 10 HRS

PROVIDING SUPPLYING AND FIXING 6.00MM THICK ISI MARK NON ASBESTOS CEMENT FULLY CORRUGATED ROOF SHEETS ,CORNERS,APRONS PIECES AS PER EXISTING PATTERN CONFORMING TO IS:14871 (LATEST VERSION) OF VARYING LENGTHS WITH TOP SURFACE COATED WITH PURE WATER BASED EXTERIOR GRADE ACRYLIC EMULSION PAINT WITH BOTTOM NATURAL GREYU FINISH INCLUDING 8MM DIA. STAINLESS STEEL (SS 304) J OR L HOOK BOLTS WITH 50MM MINIMUM THREADED LENGTH, SS WASHERS, SS NUTS, CORNER PIECES, RIDGES, GUTTERS, CORNERS, NORTH LIGHT CURVES, CUTTING SHEETS TO SIZE AND SHAPE WHEREVER REQUIRED ETC. COMPLETE AS DIRECTED BI EIC (ENGINEER IN CHARGE). (LAPS SHALL NOT BE PAID EXTRA, SHEET COLOUR TO BE APPROVED BEFORE USE. STANDARD COLOUR OPTIONS TERRACOTA RED/BLUE/GREEN/IVORY WHITE).JOB TO BE CARRIED OUT IN RUNNING PLANT IN COMPRESSORS SHEDS AND OTHER LOCATIONS AT HEIGHT WITH SAFETY PROCEDURE AS PER EIC.

PROVIDING SUPPLYING & FIXING OF 0.5 MM THICK META COLOUR CORRUGATED SHEETS I.E. 0.45MM BASE METAL THICKNESS AND 0.50MM TOTAL COAT THICKNESS OF MINIMUM YIELD STRENGTH OF 550 MPA FOR ROOFING AND CLADDING AND AS PER THE BELOW MENTIONED TECHNICAL SPECIFICATIONS INCLUDING CORNER PIECE, RIDGE ETC IN MATCH WITH EXISTING PATTERN . PPGL- PRE PAINTED GALVALUME STEEL SHEET ZINC COATING : AZ 150 PAINT COATING : SUPER DURABLE POLYESTER(SDP) PAINTING / SILICON MODIFIED POLYESTER (SMP) PAINTING AS DIRECTED BY EIC PAINTING THICKNESS (TOP) : 25 MICRON PAINTING THICKNESS (BOTTOM) : 5-7 MICRON SELF-DRILLING SELF-TAPPING SCREWS: HEX HEADED WITH EPDM/NEOPRENE WASHERS

PROVIDING SUPPLYING AND FIXING, 2MM THICK POLYCARBONATE,WHITE DIFFUSER TYPE CORRUGATED/PLAIN SHEET AS PER EXISTING PATTERN OF APPROVED INCLUDING FIXING NECESSARY ACCESSORY AND FASTNERS REQUIRED AS PER SITE CONDITIONS AND AS DIRECTED BY RCF LTD. IF THICKNESS OF SHEET IS LESS THAN 2MM,RATE WILL B E REDUCED PROPOTIONATELY.JOB TO BE CARRIED OUT IN RUNNING PLANT IN COMPRESSORS SHEDS AND OTHER LOCATIONS AT HEIGHT WITH SAFETY PROCEDURE AS PER EIC.

PROVIDING AND FIXING MISC. MATERIALS NOT COVERED IN THE SCHEDULE OF RATES INCLUDING TRANSPORTING, LOADING, UNLOADING AT SITE ETC. (CASH RECEIPT TO BE SUBMITTED).