Repair/Maint/Replacement of UNSV perimeter security lights, Junction Box, LT underground cable, Jointing Kits, Time switch and painting of poles at AF StnBihta under GE (AF) Bihta

Amount

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep in soft/loose soil and getting out for laying under ground cable / erection of poles, stays etc complete all as specified and as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and as directed.

Removing of excavated material n, exc 50 mtr away and depositing where directed at a level n, exc 1.5 mtr above the starting point complete all as specified and as directed.

Material and labour for laying of bricks sub class ‘B’ (old size bricks) laid flat perpendicular to the direction of cable for protection of cable complete all as specified and as directed.

Material and labour for sand cushioning for cable with river washed sand and pinning to provide required cover as specified in SSR Part –I complete all as specified and directed. Note:- For payment pinned depth shall be measured.

Material and labour for cement concrete type C-1 1:3:6 ( using 20mm graded stone aggregate) for foundation, filling and mass concrete, as in coping including repair copping of poles and surface finished even and smooth to match with existing coping complete all as specified and as directed.

Supply ,laying, connecting and testing XLPE cable underground PVC insulated and over all sheathed with aluminium conductor heavy duty 1100 volts grade laid in trenches, floors, ducts passing through pipe for road crossing etc including taking down old unsv cable of any size complete all as directed by Engr-in-Charge.Note:- (Excavation, earth work, brick protection sand cushioning and GI pipe etc shall be measured & paid for separately) of following sizes :- (a) Cross sectional area 10 Sqmm 4 core

(b) Cross sectional area 16 Sqmm 4 core

(c) Cross sectional area 25 Sqmm 3 ½ core

(d) Cross sectional area 70 Sqmm 3 ½ core

Material & labour for cross arms, bracing supports, clamps and back plates fabricated from structural steel sections of any size and shape including nut, bolts, washers, welding, bending, cold or hot drilling holes in bolts of any size including applying two coats of aluminium paint over one coat of primer complete all as specified and as directed.

Labour only for shifting of existing street lights cables where directed and extend the loop portion, cut the britle cable and connect to street light junction box including provision of suitable size aluminium tube terminal and refilling the trench complete all as directed at site.

Material and Labour for fixing street light bracket made out of GI pipe light grade 40mm bore approx length not less than 120 cm bent to shape without welding including providingnew clamps made out of MS flat of size 30x5mm thick including cutting, welding, drilling holes, nut bolts, washer, etc and applying two coats of aluminium paint over one coat of red oxide primer on MS work complete all as directed including taking down old UNSV complete all as specified and directed. Make of pipe : Jindal /TATA/Prakash Surya/Swastick

Suply and fixing PVC insulated and PVC sheathed 2.5 sqmm twin core round FR copper conductor industrial cable,1100 Volt conforming to IS 694 and making necessary connections from Junction box to street light by using suitable size of aluminium thimbles/terminal etc and testing including taking down old unsv cable of any size complete all as specified and as directed. Make:Havells Cat Pat No. WHMFDSKB22X5 or equivalent in make and model of Polycab/Plaza.

Supply and fixing PVC insulated aluminium conductor 2.5 Sqmm 2 Core cable with 1x2.5 sqmm PVC instulated aluminium conductor as earth wire for service connection of street light from junction box of LT electric pole, incl taking down old unsv cable of any size complete all as specified and as directed. Make - Havells/Polycab/Plaza

Supply and fixing LED Light fitting 45 Watt with high power energy saving pressure die cast aluminium IP 66 roadway luminiarys heat resistant toughened glass with frame better optics for uniform distribution with high power LED as Ligh source including taking out old unserviceable one complete all as specified and as directed. Make - CG Cat Pat No LSTS-45-CDL-M or equivalent in make Havells/Philips/Bajaj

Supply and fixing astronomical time switch with minimum switching time of 1 minute weekly programmable including making necessary electrical connections, time setting and testing etc and taking out the old unsv one complete all as directed at site. Make:Havells Crabtree XPRO Cat Pat No DCTBW01006 or equivelent in make L&T/Legrand

Supply and fixing LED outdrivers suitable for 45 Watt LED street light and making electrical connections and testing etc complete all as directed. Make : CG Cat part No - SODQL-65-700-45W or equivalent in make Havells/Philips

Dismantling and taking down unserviceable High mast lantern complete set ( 9 Nos x 250 watt / 6 Nos x 250 watt LED Flood lights) from high mast pole after disconnection all electrical connections and refixing the same after making it serviceable including all electrical connections complete all as specified and directed. Note : Spare parts required for repair of unserviceable floodlights shall be deemed to be included in quoted rate ie LED driver, surge protection device etc

Supply and fixing LED flood light energy saving & environmental friendly long life versatile pressure die-cast aluminum, IP65 flood light of 50 Watt 240 Volts single phase including taking down old unsv flood light of any wattage complete all as specified and directed. Make : Crompton Cat part No LFL-50-CDL/60-M/ Surya/Havells/Philips

Supply and fixing in replacement of old UNSV/damaged retro reflecting strip on 9 and 11 mtr long poles where directed. The width of tape not less than 50 mm the colour of tape shall be Yellow complete all as directed. Make: 3 M Cat part No E1 104R -00821 or equivalent in Raychem

Supply and fixing in replacement of old UNSV/damaged retro reflecting strip on 9 and 11 mtr long poles where directed. The width of tapes shall not be less than 50mm and colour of tape shall be Red complete all all as dircted. Make: 3 M Cat part No E1 104R -00821 or equivalent in Raychem

Supply & fixing GL tubing light grade, on poles, under floors, road crossing etc all as reqd at site and as directed by Engr-in-Charge. (a) 50 mm bore

(b) 80 mm bore

M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised iron strip 32x6 mm dia as earthing lead by means of bolts, nuts, check-nuts, and washers of galvanised iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, GI pipe light grade 40 mm bore for protection of GI strip from earth electrode to and including the earth test point of galvanised Iron/steel . supplying and laying charcoal stone aggregate) chamber and RCC cover of size 54x54x50 mm (1:2:4) type B1 using 20 mm graded crushed stone aggregate reinforced with 8 mm dia TMT bars @ 75mm C/C both ways with mild steel handle 12 mm dia, PGI funnel with wire mesh, 20 mm dia GI pipe medium grade for watering all as shown in drawing including taking out the old one. Note - Cost of GI strip and GI protection pipe up to a distance 7.5 M shall be included in quoted rate of above Items.

Supply and fixing end termination indoor type cable jointing kit suitable for 1.1 KV grade cable complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured aluminium conductor cable of size 4-16 Sqmm Indoor/Outdoor type complete all as specified and directed Make : Denson/M-seal/Raychem

Supply and fixing end termination indoor type cable jointing kit suitable for 1.1 KV grade cable complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured aluminium conductor cable of size 25-50 Sqmm Indoor/outdoor type complete all as specified and as directed Make: Denson/Raychem/M-Seal

Supply and fixing cable jointing kit suitable for 1.1 KV grade cable out door end termination, heat shrinkable type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 70 to150 sq mm complete all as specified and directed. Make : Denson / M-Seal/Raychem.

Supply and fixing cable jointing kit suitable for 1.1 KV grade cable for straight thorough joint complete with jointing material heat shrink type and accessories suitable for 3 ½ 4 core XLPE, armoured, Al conductor cable of size 25 to 50 Sqmm complete all as specified and as directed Make: Denson/Raychem/M-Seal

Supply and fixing LED Decorative post top (MAPLE) for 360 degree indirect light with IP 65 protection. Cat Ref - LPTO-40-CDL/M incl taking down old unsv complete all as directed. Make : Crompton or equivalent in Havells/Bajaj/Surya/Philips.

Material and labour for prepration of old surface of steel tubular LT poles 9.0 mtrs long, cross arms,bracing,supports,clamps,eye hooks street light junction box etc and apply two coats of aluminium paint over a coat of primer including providing blue and white strips 30 cm width alternatively upto 1.50 m height from coping using synthetic enamel paint complete all as specified and directed.

Material and labour for fixing junction box made of plastic material of size 239x328x129 mm with opaque comver, conical cable gland aluminium lugs, protection class IP 65, 4 Nos aluminium bus bar of size 25x4 mm for three phase and neutral including 01 No MCB SP 6 Amps for controlling street light and 02 Nos MS clamp of size 30x5 mm complete with nut, bolt and washers for mounting the junction box on stret light pole complete including taking downold one and all as specified and as directed.

Supply and fixing panel/junction box lock screw type having cylinder length of 25 mm stealthlock keyless locking system of material zinc alloy, chrome finish and silver in clour and complete all as specified and as directed.

SANYOG CONSTRUCTION PRIVATE LIMITED

AAY JAY ENTERPRISE