PROVISION OF FURNITURE IN BLDG NO P 50 FOR ISR PROJECT AT CABS BENGALURU

Amount

Supply and installation of Conference Table 21 Seater of size (2350mm Head Module - 1, 1350mm(W) x 650mm(D) x 750mm (H) of size - Dual Seater Main Module - 2Nos, Shared Module - 6Nos, LH Module - 1 Nos & RH - 1 Nos).Table Should be made out of 36mm thick MDF one side prelaminated board conforming to IS14587:1998 with 0.4mm PVC membrane pressed on to top and having chamfered edge. Understructure : of the table shall be made out of 25mm thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990. Edge of the table : shall be bonded with matching 2mm thick PVC tape with the help of hot melt glue/PVC lapping. Cable End & modesty Panel : of the table 18mm thick prelaminated block board of E1-P2 grade and approved shade conforming to IS-12823:1990. Wire Management : panels of the table shall be made out of 0.8mm/1.2mm CRAC MS IS:513, epoxy powder coated equipped with Extron cables cubies alongwith cable retractors the conference table with provision to mount cables of HDMI/VGAA and Cutout for standard Anchor Roma 4 module shall be provided for electrical fittings in straight two seater and single seater modules below access flap per seat. Standard manufacturer specification to be followed and colour as approved by GE. Make-Godrej/Durian/Featherlite.

Supply of Centre Table – Overall Size of the table shall be 1070mm(L ) X 615mm(B) X 460 mm (H). TOP : having 25mm thick solid wood top shall be provided of rectangular shape. 35mm X 35mm(WxD) legs to be provided for the table.Standard manufacturer specification to be followed and colour as approved by GE. Make-Godrej/Durian/Featherlite .

Supply of corner Table of size 605mm(L)x 600(B) and 460mm (H). Top to be made out of 18mm Solid Wood and frame material to be made of 36 mm wood Legs to be provided and made out of 45mmx45mm wood .Understructure to be made out of wood. Nylon buffer shoes to be provided at the bottom. Shape of the table shall be Square and Standard manufacturer specification to be followed and colour as approved by GE. Make-Godrej/Durian/Featherlite

Supply of Laboratory Workbench of size 1200(L) x 900 (B) x 750(H) (with storage Cabinet). Top of the table shall be made out of 36mm thick MDF board conforming to IS14587:1998. Under Structure : of the workbench shall be made of hollow metal sections of 30x30mm confirming to IS 7138 : 1973 and all sheet metal components shall be made of CRCA sheet of 1.6mm thick conforming to IS Code 513 : 1994. The suspended members under the workbench shall be welded and supported on heavy duty steel frames made of square pipe with a cross section of 30x30mm and shall be minimum of 1.6mm thick and a superior strength combined with aesthetically appealing end caps shall give maximum flexibility and modularity for the layout. Electrical management : Leg Space & Side Panels of the workbench shall be made out from CRCA MS panels of minimum 0.8mm thickness with pure epoxy powder coating. Housing of the workbench should be having electrical switches and sockets Min 05 Nos with electrical cutout and bottom panel shall be made of 0.8mm CRCA MS with pure epoxy powder coating. Standard manufacturer specification to be followed and colour as approved by GE. Make-Godrej/Durian/Featherlite

Supply of Two seater Sofa of overall size 125.7 cm (W) and 74.5 (H) cm and 77.5 cms (D) and height of seat from ground 41.50 cm. Two seater sofa shall be made of SS structure. Sofa should be lounge sitting system standing on beam with side frame assemblies. The LH/RH side frame should be fitted to the two ends of the seat and back mounting frame in form of legs.It should be made of SS J4 grade tube of 45mmx1.5mm thick .The seat and back to be mounted on MS rectangular tube which should be moulded on the beam of seat/back mounting frame. The seat and back to be provided with velvetine plus fabric over 10mm thick plywood covered with PU foam of density 45/kg cum. The frame /structure to be painted with powder coating paint of black colour Standard manufacturer specification to be followed and colour as approved by GE. MAKE: - Godrej/Durian/Featherlite

Supply of Single seater Sofa of size 68.4 cm width x height 74.5 cm x depth 77.5 cms and height of seat from ground 41.50 cm. Single seater sofa shall be made out of SS structure. Sofa should be lounge sitting system standing on beam with side frame assemblies.The LH/RH side frame should be fitted to the two ends of the seat and back mounting frame in the form of legs.It should be made of SS J4 grade tube of 45mmx1.5 mm thick .The seat and back to be mounted on MS rectangular tube which should be moulded on the beam of seat/back mounting frame. The seat and back to be provided with velvetine plus fabric over 10mm thick plywood covered with PU foam of density 45/kg cum. The frame /structure to be painted with powder coating paint of black colour Standard manufacturer specification to be followed and colour as approved by GE. Make- Godrej/Durian/Featherlite

Supply of Hi Back Chair: Overall size of the chair shall be (W) 76 cm x (D) 70.7 cm x (H) 103.5-120.5 cm (SH) . Seat/Back of the chair shall be made out of 1.2mm thickness hot pressed plywood upholstered with fabric or synthetic leather and moulded polyurethane Foam. Size of the back shall be 48.5cm (W) x 76.0cm (H) and SEAT SIZE shall be 51.0cm (W) x 48.0cm (D). Foam : Foam of the seat & back shall be made out of HR polyurethane foam moulded with density = 45 +/-2 kg/sqm and Hardness load 12 kgf as per IS 7888 for 25% compression. Arm Rest : of the chair shall be Adjustable and moulded from polyurethane (PU) and mounted on to a drop lift adjustable type tubular armrest suppport.The armrest height adjustable upto 6.5 + cm in 5 steps system shall be provided having Knee Tilt Synchronize Mechanism with seat depth adjustment. Locking System : 360 Degree revolving type and more comfort tilt tension having 4-position locking with anti-shock feature. PEDESTAL ASSEMBLY : The pedestal is fabricated from 0.2 + 0.02cm thick HR sheet, chrome plated and assembled with injection moulded black polypropylene hub cap and 5 nos. twin wheel castors having 76.0 cm dia with casters. Standard manufacturer specification to be followed and colour as approved by GE. MAKE: - Godrej/Durian/Featherlite

Supply of Mid Back Chair of overall size of the chair Height 97cm x Width 76.3cm x Depth 54.5cm. Seat/Back of the chair shall be made out of 1.2mm thickness hot pressed plywood upholstered with fabric or synthetic leather and moulded polyurethane Foam. Size of the back shall be 47.5cm (W) x 58.0cm (H) and SEAT SIZE shall be 47.0cm (W) x 48.0cm (D). Foam : Foam of the seat & back shall be made out of HR polyurethane foam moulded with density = 45 +/-2 kg/m* and Hardness load 16 kgf for 25% compression. Arm Rest : of the chair shall be fixed type injection moulded from back Co-polymer Polypropylene. Chair mechanism shall be provided having Center tilt Mechanism . Locking & Revolving System : 360 Degree revolving type and more comfort tilt tension having upright locking with tilt tension adjustment . PEDESTAL ASSEMBLY : The pedestal is fabricated from 0.2 + 0.02cm thick HR sheet, chrome plated and assembled with injection moulded black polypropylene hub cap and 5 nos.. Standard manufacturer specification to be followed and colour as approved by GE . MAKE: - Godrej/Durian/Featherlite

Supply and installation of Meeting Table: Unitized 8 seater meeting table oval shaped – overall size 2350mm(W) x 1150mm(D) x 740mm(H) made of 25 mm MDF with one side laminate finish and edges to be covered with 0.4 mm thick PVC membrane. The understructure is to be made of 18mm thick PLPB and supporters to be made of 25mm thick PLPB(Twin board of E1=P2 grade) and bonded with 02mm thick PVC lapping. Wire raiser made of 0.8mm CRCA is to be provided with epoxy powder coating for flow of wires and cables. A power box with 02 cutouts on either side for standard 08 module is to be provided , additional cutout to be provided for mounting audio-visual cables. Standard manufacturer specification to be followed and colour as approved by GE. Make- Godrej/Durian/Featherlite

Supply and installation of Meeting Table: Unitized 6 seater meeting table oval shaped – overall size 2100mm(W) x 1150mm(D) x 740mm(H) made of 25 mm MDF with one side laminate finish and edges to be covered with 0.4 mm thick PVC membrane. The understructure is to be made of 18mm thick PLPB and supporters to be made of 25mm thick PLPB(Twin board of E1=P2 grade) and bonded with 02mm thick PVC lapping. Wire raiser made of 0.8mm CRCA is to be provided with epoxy powder coating for flow of wires and cables. A power box with 02 cutouts on either side for standard 08 module is to be provided , additional cutout to be provided for mounting audio-visual cables. Standard manufacturer specification to be followed and colour as approved by GE . Make- Godrej/Durian/Featherlite

Supply and installation of Office Cubical of size 1500mm (W1) X 1500mm (W2) X 600mm (D) X 1200mm (H) with pedestal + KBPT + CPU Trolley . Top : shall be made of 25mm thick prelaminated particle board interior grade (As per IS:12823). Edges : All the edges of work surface shall be provided with machine pressed 2mm thick PVC edge band glued with hot melt EVA glue. Legs : of the cubicle shall be fabricated by CO2 welding MS Tube of section 38mm x 25mm (IS:7138 ERW Tube) with the base plate of the MS plate of 35x22x5mm (IS:2062, 5mm HR) over which an MB Leveler shall be fitted, which shall allow for adjustment of the height by 50mm, this shall be coated with min 45 micron thickness of epoxy powder coating Body Panel Structure : of the cubicle having aluminium thickness 1.2mm powder coated and bottom frame comprise of L channels shall be made of 2 mm thickness CRCA steel and ERU Steel tube size 35x15x1.6 mm in oval cross section (IS : 7138) welded together having epoxy powder coated. Panel tiles Top Tiles fabric magnetic tiles shall be fabric upholstered metal tiles in 0.6mm thick GI Grade 'O' as per IS:277.The fabric shall be upholstered with adhesives. Bottom tile made up of metal & shall be powder coated in 0.8mm thick MS CRCA Grade D as per IS:513. intermediate tile must contain wire management and provision for electrical switch cutout Pedestal : shall be made of metal and having configuration of 2 Drawer & 1 shutter of size - 390Wx435dx645H. Construction & Material of Drawer Unit shall be welded & assembled of 0.8mm thick CRCA for body shell, drawer front & tray, front side stiffener & bottom, 1.2mm thick CRCA top stiffener Standard manufacturer specification to be followed and colour as approved by GE . Make- Godrej/Durian/Featherlite

Supply and installation of Office Cubical of size 1800mm (W1) X 1500mm (W2) X 600mm (D) X 1200mm (H) with pedestal + KBPT + CPU Trolley . Top : shall be made of 25mm thick prelaminated particle board interior grade (As per IS:12823). Edges : All the edges of work surface shall be provided with machine pressed 2mm thick PVC edge band glued with hot melt EVA glue. Legs : of the cubicle shall be fabricated by CO2 welding MS Tube of section 38mm x 25mm (IS:7138 ERW Tube) with the base plate of the MS plate of 35x22x5mm (IS:2062, 5mm HR) over which an MB Leveler shall be fitted, which shall allow for adjustment of the height by 50mm, this shall be coated with min 45 micron thickness of epoxy powder coating Body Panel Structure : of the cubicle having aluminium thickness 1.2mm powder coated and bottom frame comprise of L channels shall be made of 2 mm thickness CRCA steel and ERU Steel tube size 35x15x1.6 mm in oval cross section (IS : 7138) welded together having epoxy powder coated. Panel tiles Top Tiles fabric magnetic tiles shall be fabric upholstered metal tiles in 0.6mm thick GI Grade 'O' as per IS:277.The fabric shall be upholstered with adhesives. Bottom tile made up of metal & shall be powder coated in 0.8mm thick MS CRCA Grade D as per IS:513. intermediate tile must contain wire management and provision for electrical switch cutout Pedestal : shall be made of metal and having configuration of 2 Drawer & 1 shutter of size – 390mm (W) x 435mm (D) x 645mm (H). Construction & Material of Drawer Unit shall be welded & assembled of 0.8mm thick CRCA for body shell, drawer front & tray, front side stiffener & bottom, 1.2mm thick CRCA top stiffener Standard manufacturer specification to be followed and colour as approved by GE. Make- Godrej/Durian/Featherlite

Supply of Executive Table of size 1800mm(L) x 850mm(D) x 750mm(H) made out of 25 mm thick Pre laminated MDF Board and modesty panel is to be made out of 18mm thick Flat Single layer prelaminated MDF board of grade SBG II confirming to IS 12406 with gable end and modesty panel . The Edges to be banded with 02 mm PVC tape and 04 nos of buffers to be provided at the bottom Thickness of cable end and modesty panel- 25mm .The table to be provided without legs . Double storage unit to be provided with 450mm ( W and D) and 750mm(H) of smallest storage unit and 125mm (H) of medium storage unit .305mm(H) of largest storage unit. Standard manufacturer specification to be followed and colour as approved by GE. Make- Godrej/Durian/Featherlite

Supply of Modular Side Storage unit of size 1200 mm X 450 mm X 750 mm ( With one shelf ) made of 25 mm thick three layered PLPB of Grade II Type II confirming to IS 12823 is to be provided with single shelf shall be fixed with side and bottom having skirting by wooden type interconnecting bodies of storage module to be fixed with sides,bottom,shelf & shutter together.skirting is made of 25 mm thick three layered PLPB of Grade II Type II confirming to IS 12823 is to be provided. The entire unit is to be made out of 25 mm thick three layered PLPB with one side balancing white and edges to be bonded with 02 mm thick PVC tape Standard manufacturer specification to be followed and colour as approved by GE. Make-Godrej/Durian/Featherlite

Supply of Back Unit - for table of size 1800mm(L)x500mm(D)x750mm(H) made of 25 mm thick MDF and Top Panel-made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top one side prelaminated board confirming to IS 14587 is to be provided. Side door unit of matching back unit side is to be provided with shutters – soft closing mechanism and anti slam mechanism is to be provided alongwith handles for the unit .The storage unit is to be provided with lock.Edge banded with matching 2mm thick PVC lapping for body panels like side, bottom, back and shelves. Shutters are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Shutters have a soft closing & anti slam mechanism. Standard manufacturer specification to be followed and colour as approved by GE. Make- Godrej/Durian/Featherlite

Supply of Modular Side Storage unit with one shelf - Size 1200mm(L)x450mm(D)x750mm(H) made of 38mm thick decorative block board of BWP grade confirming to IS 1659.all sides,bottom,shelf, shutter edge to be banded With 0.8-1.0 Mm Thick PVC Tape With The Help Of Hot Melt Glue Overlapping of equal shutter overlap of 50 mm Buffer Provided Adequate Number At The Bottom Type of shutter / doors sliding shutter doors shutter doors moving on nylon wheel Push and turn lock to be provided. Shutters are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Shutters have a soft closing & anti slam mechanism Standard manufacturer specification to be followed and colour as approved by GE. Make-Godrej/Durian/Featherlite

Supply of Visitor Chair overall size shall be 93.5 Cm (H) X 61 Cm (W) X 64.5 cm (D) . SEAT ASSEMBLY :The seat assembly should be made up of 1.2 cm thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded polyurethane foam.size of the seat shall be 47.0CM (W) x 48.0 cm (D) , & back of size 46.5 cm (W) x 60.5 cm (H) .The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn : Foam of the seat & back shall be made out of HR polyurethane foam moulded with density = 45 +/-2 kg/m* and Hardness load 16 kgf as per IS 7888 for 25% compression ARMRESTS : The one-piece armrests should be injection moulded from black co-polymer Polypropylene. TUBELAR FRAME : shall be powder coated (DFT 40-60 microns) with cantilever type .Standard manufacturer specification to be followed and colour as approved by GE. Make-Godrej/Durian/Featherlite

Supply of Wooden Almirah : made of commercial block board MR grade 18 mm thick of size 1850mm(H)x910mm(W)x450mm(D) is to be provided with three nos of shelves at equal distance. 04 numbers of door hinged with equal width is to be provided with auto closing hinges and overlay type colour of laminate as approved by GE. 2 handles and lock to be provided for each door with tower bolts made of aluminium . All plain sides to be bonded with 02mm thick PVC tape with the help of hot melt glue . All plain sides of the top edge to be provided with CP teak wood lapping . CP teak wood is to be provided for bottom,sides and door edge. Standard manufacturer specification to be followed and colour as approved by GE. Make-Godrej/Durian/Featherlite

Supply of White Board : of size 1500mm(W)x900mm(H) is to be provided the frames are required to be made of anodized extruded aluminium alloy hollow section of standard manufacturer size and core material to be made of MDF board grade I confirming to IS 12406 of thickness 09mm with white colour on the front side. Standard manufacturer specification to be followed and colour as approved by GE . Make-Alkosign/Godrej/Durian

Supply of Office Modular Table - table of size 1500mm(L)x900mm(D)x750mm(H) is to be provided and made of commercial black board MR grade 19mm thick . and confirming to IS 1659 with gable end and modesty panel. Side storage units and drawers to be provided as per standard manufacturer offering . Standard manufacturer specification to be followed and colour as approved by GE. Make-Alkosign/Godrej/Durian

Supply of Storage wooden Hinged Door Unit – Storage unit of size 1222mm(W)x1353mm(H)x460mm(D) is to be provided made of 25 mm thick PLPB with metal cladding of 0.8mm thick made of CRCA and epoxy powder coated .Storage unit of Height 2.5 Feet to be accommodated in storage unit is to be provided Standard manufacturer specification to be followed and colour as approved by GE . Make-Alkosign/Godrej/Durian.

Capital Construction Company

agarwal and company

Sunshine Enterprises

KASTURILAL HARICHAND OHRI AND SONS