Servicing and minor repairing of DG sets i/c providing battery and changeover switch at various BTS/Hub sites under BA Jhansi.

Carrying out 'B' Check servicing of following capacity E/A sets located at various T.E. Bldg / BTS including replacement of old engine oil, fuel filter, lubricating oil filter etc. by new as per manufactures recommendation including arranging vehicle, transportation, manpower, tools and plants, testing etc. as required (Oil, filters shall be manufacturer recommended specs) (Note- This item includes visit charges, nothing extra on this account shall be paid) [a] 12.5 KVA / 15 KVA EA Set (Eicher-322-ES/ ESCORT/ Ashoka Lelyand/ Mahindra/Kirlsokar etc).

[b] 20 KVA/25 KVA (Eicher-322-ES/ ESCORT/ Ashoka Lelyand/ Mahindra/ Kirloskar etc)

[c] 30/32.5/40KVA EA set ( Kirloskar--HA494-Air Cooled)

[d] 32.5 KVA/40 KVA EA set ( Kirloskar--3R1040-water Cooled)/ Greaves/ Mahendra-4575 GM-water Cooled)

[e] 62.5 KVAset ( Kirloskar-/ Greaves/ Mahendra)

Replacement following faulty parts/ accessories in control panel , connection , testing etc comp as reqd. [a] Battery charger ( Electronic Type)

Replacement of following capacity low maintenance Battery for E/A sets i/c connection, testing etc complete as required. [a] 88 AH Battery (MHD880 or approved make)

[b] 130 AH Battery (MHD1300 or approved make)

[c] 150 AH Battery (MHD1500 or approved make)

Repairing of following items of EA set i/c replacement of faulty parts ,making connection, testing etc complete as reqd. [a] Starting Self 12v up to 25 KVA

[b] Starting Self 12V, 32.5 to 62.5 KVA

[c] Charging Alternator

[d] Repairing and Cleaning of Engine Radiator up to 62.5 KVA EA Set etc complete as required.

[e] Stop Solonoid

Repairing and servicing of FIP i/c replacement of faulty components , testing , calibration etc. complete as reqd. [a] Up to 25 KVA EA Set

[b] From 30 KVA to 62.5 KVA EA Set

Re-winding of alternator with "H" class insulated copper wire and "H" class insulated material (Paper, Varnish ,appoxi base hardner) i/c replacement of diodes, petty repairing ,testing , dismantling and realignment , transportation upto work shop , loading /unloading etc. complete as required. (Note: The dismantled burnt copper winding will be the property of the firm, so the rates to be quoted accordingly). [a] Up to 25 KVA EA Set

[b] From 30 KVA to 62.5 KVA EA Set

S/F of following capacity rating four pole on Load change over switch in steel enclosure capable of working 415/500 V ,AC 23 Duty i/c drilling hole on the board, making connection, earthing the body etc. as reqd. (Make: HPL SOCOMAC or SS make) [a] 63 Amp Four pole on load

[b] 125 Amp Four pole on load

Supplying & fixing of three Phase AVR suitable for voltage regulation in DG set upto 62.5 KVA Capacity EA set i/c testing etc. complete as reqd.

S/F battery lead complete with terminals at both ends i/c connections etc. as required.

Shifting of following capacity DG set from one site to another i/c dismantling , loading / unloading and installation of DG set at new location etc. complete as reqd . ( Upto 30 Km distance ) [a] Upto 25 KVA DG set

[b] Above 25 KVA to 62.5 KVA EA Set

[c] Extra charges for distance more than 30 Km

Supply and laying of one number 4x16 Sqmm XLPE insulated and PVC sheathed power cable of 1.1 KV grade of following size aluminium conductor armored cable in the following manners:- [a] In the existing masonry open duct/surface/wall as required.

[b] Direct in CC floor i/c cutting the CC floor and making good the damages etc. complete as required.

Supply and laying of one number 3½ x50 Sqmm XLPE insulated and PVC sheathed power cable of 1.1 KV grade of following size aluminium conductor armored cable in the following manners:- [a] In the existing masonry open duct/surface /wall as required.

[b] Direct in CC floor i/c cutting the CC floor and making good the damages etc. complete as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. [a] 4x16 sq. mm

[b] 3½ X 50 sq. mm