REPAIR OF FURNITURE SOFA SET AT OFFR MD ACCN /BSO FURNITURE YARD UNDER GE(W), COLABA, MUMBAI

Amount

Sofa Set 5 Seater FD-373/FD/MAP-II/02/Similar Pattern M&L for removing the existing unserviceable tapestry cloth, cushion of sofa set and replacing with foam cushion 40 density 100mm thick of size 530mm x 560mm x 100mm, Foam cushion of Seat and back shall be provided with tapestray cloth over marking cloth. Shade of cloth shall be as approved by GE/ Engr in charge. Cloth shall be with provision of suitable chain for easy replacement of cloth for the seat and back as specified and directed. Note :- (i) Each cushion for seat or back will be measured as single unit. (i) The tapestry cloth shall be mat finished and shall not less than Rs. 650/- per metre and as approved by GE.

M&L for removing the existing unserviceable front leg of Sofa and providing new first class hardwood teakwood of leg size 70mm x 35 mm x 300mm, rest all as shown on drg as specified and directed.

M&L for removing the existing unserviceable rear leg from Sofa and providing new first class hardwood teakwood of leg size 70mm x 35 mm x 300mm, rest all as shown on drg as specified and directed.

M&L for removing existing unserviceable Arm rest from Sofa and providing new first class hardwood teakwood arm rest of size 35mm x 70mm x 725mm, rest all as shown on drg as specified and directed.

M&L for removing existing unserviceable side rail from Sofa and providing new first class hardwood teakwood side rail of size 35 mm x 100mm x 725mm, rest all as shown on drg as specified and directed.

M&L for removing existing unserviceable bearer from Sofa and providing new first class hardwood teakwood bearer of size 40mm x 40mm x 725mm, rest all as shown on drg as specified and directed.

M&L for removing existing unserviceable battens from Sofa and providing new first class hardwood teakwood battens of size 50mm x 20 mm, rest all as shown on drg as specified and directed.

M&L for removing existing unserviceable front rail from Sofa three seater and providing new first class hardwood teak wood front rail of size 35mmx 100mm x 1590 mm, rest all as shown on drg as specified and directed.

M&L for removing existing unserviceable front rail from Sofa single seater and providing new first class hardwood teak wood front rail of size 35mm x 100mm x 530 mm, rest all as shown on drg as specified and directed.

M&L PVC Shoes for sofa set legs of approved Make and quality all as specified and directed.

Scraping and removing of all dusts including sand papering & preparing of surface and filled with wax / wooden putty and finishing with two coats of French polish to match with the colour with high class glossy finish in the furniture as per drawing all as specified and as directed

Sofa Set 4 Seater FD-373/FD/MAP-II/02/Similar Pattern M&L for removing the existing unserviceable tapestry cloth, cushion of sofa set and replacing with foam cushion 40 density 100mm thick of size 530mm x 560mm x 100mm, (Techno foam) etc. Foam cushion of Seat and back shall be provided with tapestry cloth over marking cloth. Shade of cloth shall be approved by GE. Cloth shall be with provision of suitable chain for easy replacement of cloth for the seat and back all as specified and directed. Note :- (i) Each cushion for seat or back will be measured as single unit. (ii) The tapestry cloth shall be mat finished and shall not less than Rs. 650/- per metre and as approved by GE.

M&L for removing the existing unserviceable front leg from Sofa and providing new first class hardwood teakwood of leg size 70mm x 35 mm x 300mm, rest all as shown on drg all as specified and directed.

M&L for removing the existing unserviceable rear leg from Sofa and providing new first class hardwood teakwood of leg size 70mm x 35 mm x 300mm, rest all as shown on drg all as specified and directed.

M&L for removing existing unserviceable Arm rest from Sofa and providing new first class hardwood teakwood Arm Rest of size 35mm x 70mm x 725mm, rest all as shown on drg as specified and directed.

M&L for removing existing unserviceable side rail from Sofa and providing new first class hardwood teakwood side rail of size 35 mm x 100mm x 725mm, rest all as shown on drg all as specified and directed.

M&L for removing existing unserviceable bearer from Sofa and providing new first class hardwood teakwood bearer of size 40mm x 40mm x 725mm, rest all as shown on drg as specified and directed.

M&L for removing existing unserviceable battens from Sofa and providing new first class hardwood teakwood battens of size 50mm x 20 mm, rest all as shown on drg all as specified and directed.

M&L for removing existing unserviceable front rail from Sofa and providing new first class hardwood teak wood front rail of size 35mm x 100mm x 530 mm, rest all as shown on drg as specified and directed.

M&L PVC Shoes for sofa set legs of approved Make and Quality all as specified and directed.

Scraping and removing of all dusts including sand papering & preparing of surface and filled with wax / wooden putty and finishing with two coats of French polish to match with the colour with high class glossy finish in the furniture as per drawing all as specified and as directed

Sofa Single Seater FD-373/FD/MAP-II/02/Similar Pattern M&L for removing the existing unserviceable tapestry cloth, cushion of sofa set and replacing with foam cushion 40 density 100mm thick of size 530mm x 560mm x 100mm, (Techno foam) etc. Foam cushion of Seat and back shall be provided with tapestry cloth over marking cloth. Shade of cloth shall be as approved by GE/Engr in charge. Cloth shall be with provision of suitable chain for easy replacement of cloth for the seat and back all as specified and directed. Note :- (i) Each cushion for seat or back will be measured as single unit. (i) Tapestry cloth shall be mat finish and not less than Rs. 650/- per metre as approved by GE or Engr in charge.

M&L for removing the existing unserviceable front leg from Sofa and providing new first class hardwood teakwood of leg size 70mm x 35 mm x 300mm, rest all as shown on drg all as specified and directed.

M&L for removing the existing unserviceable rear leg from Sofa and providing new first class hardwood teakwood of leg size 70mm x 35 mm x 300mm, rest all as shown on drg all as specified and directed.

M&L for removing existing unserviceable Arm rest from Sofa and providing new first class hardwood teakwood Arm Rest of size 35mm x 70mm x 725mm, rest all as shown on drg, all as specified and directed.

M&L for removing existing unserviceable side rail from Sofa and providing new first class hardwood teakwood side rail of size 35 mm x 100mm x 725mm, rest all as shown on drg, all as specified and directed.

M&L for removing existing unserviceable bearer from Sofa and providing new first class hardwood teakwood bearer of size 40mm x 40mm x 725mm, rest all as shown on drg all as specified and directed.

M&L for removing existing unserviceable battens from Sofa and providing new first class hardwood teakwood battens of size 50mm x 20 mm, rest all as shown on drg all as specified and directed.

M&L for removing existing unserviceable front rail from Sofa single seater and providing new first class hardwood teak wood front rail of size 35mm x 100mm x 530 mm, rest all as shown on drg all as specified and directed.

M&L PVC shoes for sofa set legs of approved Make and Quality all as specified and directed.

Scraping and removing of all dusts including sand papering & preparing of surface and filled with wax / wooden putty and finishing with two coats of French polish to match with the colour with high class glossy finish in the furniture as per drawing all as specified and directed

Sofa Set 5 Seater/ 4 Seater SK-1075/07, SK-1070/07/ TP/Similar Pattern M&L for removing the existing unserviceable tapestry cloth, cushion of sofa set and replacing with foam cushion 40 density 100mm thick,(Techno foam) etc. Foam cushion of Seat and back shall be provided with tapestry cloth over marking cloth. Shade of cloth shall be as approved by GE. Cloth shall be with provision of suitable chain for easy replacement of cloth for the seat and back all as specified and directed.. Note :- (i) Each cushion for seat or back will be measured as single unit. (ii) The tapestry cloth shall be mat finished and shall not less than Rs. 650/- per metre and as approved by GE.

M&L for removing the existing unserviceable front leg from Sofa and providing new first class hardwood teakwood of leg all as shown on drg all as specified and directed.

M&L for removing the existing unserviceable rear leg from Sofa and providing new first class hardwood teakwood of leg all as shown on drg all as specified and directed.

M&L for removing existing unserviceable Arm rest from Sofa and providing new first class hardwood teakwood Arm Rest, all as shown on drg all as specified and directed.

M&L for removing existing unserviceable side rail from Sofa and providing new first class hardwood teakwood side rail of size 35 mm x 100mm x 725mm all as shown on drg all as specified and directed.

M&L for removing existing unserviceable bearer from Sofa and providing new first class hardwood teakwood bearer of size 40mm x 40mm x 725mm all as shown on drg all as specified and directed.

M&L for removing existing unserviceable battens from Sofa and providing new first class hardwood teakwood battens of size 50mm x 20 mm all as shown on drg all as specified and directed.

M&L for removing existing unserviceable front rail from Sofa three seater and providing new first class hardwood teak wood front rail of size 35mmx 100mm x 1590 mm all as shown on drg all as specified and directed.

M&L for removing existing unserviceable front rail from Sofa single seater and providing new first class hardwood teak wood front rail of size 35mm x 100mm x 530 mm rest all as shown on drg all as specified and directed.

M&L PVC Shoes for sofa set legs of approved Make and Quality all as specified and directed.

Scraping and removing of all dusts including sand papering & preparing of surface and filled with wax / wooden putty and finishing with two coats of French polish to match with the colour with high class glossy finish in the furniture as per drawing all as specified and as directed

Removing of old existing unserviceable tapestry cloth cover only, from cushion of sofa set 5 seater ( 3+1+1) FD 373, FD/E6/MAP-II/02, ( 10 nos cover in each set) and Supply & fix ( 10 Nos cover in each set) new cushion cover of high quality tapestry cloth with white inner lining cloth. The rates of tapestry cloth shall be not less than Rs. 650/- per metre duly stitched and PVC zipped of high quality (openable type)’ all as shown on drg all as specified and directed.

Chair Easy FD-358 With cushion/Similar pattern Removing old existing unserviceable cushion foam with tapestry cloth of seat and back of chair easy FD-358 and Supply & fix new cushion foam of 20 density and 50 mm thick with high quality tapestry cloth with white inner lining cloth after repair / tightening of loose parts of wooden. The rates of tapestry cloth should not less than Rs. 650/- per metre duly stitched all as shown on drg all as specified and directed.

All as per item No 44 above but Stiffner of Leg bottom

All as per item No 44 above but Front left/right Leg

All as per item No 44 above but Rear left/right Leg

All as per item No 44 above but Upper/lower stiffner of Back support

All as per item No 44 above but Bracket of teak wood

All as per item No 44 above but Front/rear//left/right rail of seat

All as per item No 44 above but PVC Ring

Scraping and removing of all dusts including sand papering & preparing of surface of chair easy and filled with wax / wooden putty and finishing with two coats of French polish to match with the colour with high class glossy finish in the furniture as per drawing all as specified and as directed

Chair Cuishioned with arm, without arm, fixed, revolving FD-75/TP/similar pattern, removing the existing unserviceable part and S&F Seat of moulded foam

All as per item No 53 above but Complete back of moulded foam

All as per item No 53 above but Revolving assembly complete with All as per item No 53 above but verticle rod

All as per item No 53 above but Chair base complete for fixing castors

All as per item No 53 above but Castor

All as per item No 53 above but Arm rest

All as per item No 53 above but Frame of arm rest

All as per item No 53 above but Bottom frame complete for non revolving chair

M&L for running welding (not exc 1 inch) of steel items including scraping, preparing surface of welded portion, grinding all as specified and as directed

Preparation/cleaning of existing decorated surface/rubbing by emery paper, removing all spots, filling all cavity with putty and applying one coat of synthetic enamel paint for repaired and existing good furniture

CHAIR WRITING MAP FD /E6 / MAP/12

M&L for removing old unserviceable seat and S&F new seat of size 500mmx500mm made up of 12 mm thick plywood BWR Gde ply and 500mm x 500 mm x 100mm thick Moulded Foam/PU foam 40 density with tapestry cloth of approved (by Engr-in-Charge) shade completely upholsted as shown on drg.

M&L for removing of old unserviceable back and S&F new back of size 500mmx500mm made up of 100mm thick Moulded Foam/PU foam 32 density well covered with tapestry cloth of approved shade completely upholsted as showen on drg.

M&L for removing of old unserviceable handle and S&F new handle of height 230mm preferably as shown on drg

M&L for removing of old unserviceable PVC Shoes and S&F new PVC Shoes in the furniture as shown on drg

M&L for Preparation of old painted steel surfaces of the chair writing and spray painting with 2 coats of black synthetic enamel paint all as specified and directed by Engr-in-Charge.

Chair Computer : FD/E6/MAP-01FD/E6/MAP/01

M&L for removal of old unserviceable seat of Chair Computer in any position and S&F new seat of size 510mmx 470mmx 60mm made up of 12 mm thick ply wood BWR Grade and 60 mm thick, 32 density PU moulded foam/cushion covered with tapestry cloth of approved shade by GE. Rest all as shown on drg and directed by Engineer-in-Charge.

All as per item Ser No 70 here-in-before but back of Chair computer, as per Drg, all as specified and directed.

M&L for removing old unserviceable Gas lifting assembly (fitted with bottom of the seat) and S&F new gas lift having chrome free cylinder tube shall be fixed in MS black powder coated outer central column tube 38 mm dia and 2 mm thick. It shall have 100mm strock length and gas pressure of 300n force.

M&L for removing old unserviceable castor wheel and S&F new PVC twin wheel castor 50 mm (Load Capacity of 80 Kg to 100 Kg) all as specified and as directed

M&L for removal of old unserviceable pedestal assembly and supply & fixing of new pedestal assembly of injection moulded in black 30% glass filled nylon, 10.5mm dia forged bright zink plated MS castor pin is of press fitted into each prong for holding the castor (600mm pitch centre dia) as shown on drawing.

M&L for removal of old unserviceable Handles and supply & fixing new scrach proof and wheather resistant handle as shown in drawing and directed by Engg-in-charge.

M&L for Painting of all steel surfaces by coating black paint after rusting/ grinding the steel surfaces of computer chair amd laminited part shall be french polished till to achive glossy finish to chair computer.

Locker Bed Side (Wooden) DRG NO FD- 54

Removing the Unserviceable leg and S&F new leg in the furniture (wooden) as per Drg all as specified and Directed

Removing the Unserviceable top plank of locker Bed side and S&F new top plank of teakwood in the furniture as per Drg, all as specified and directed

Removing the Unserviceable Back side of locker bed side and S&F new back plank of teakwood in the furniture as per Drg, all as speicified and directed

Removing the Unserviceable both sides of locker bed side and S&F new both sides plank of teak wood in the furniture, as per Drg, all as specified and directed.

Removing the Unserviceable shelf and S&F new Shelf in the furniture (wooden) as per Drg all as specified and Directed

Removing the Unserviceable conduit pipe and S&F new conduit pipe in the furniture wooden as per Drg all as specified and directed

Removing the Unserviceable hasp and Stapple and S&F new Decorative Stainless Steel Hasp and Staple of 75/100mm (3/4 Inch) in the Furniture as per Drg all as speicifed and directed

Removing the Unserviceable Shutters/ Doors and S&F the New Shutters/ Doors in the furniture as per Drg, all as specified and directed

Removing the Unserviceable Handle 4 inch and S&F new decorative Stainless steel Handle of Size 4-5 inch in the furniture as per Drg all as speicifed and directed

Scraping and removing of all dusts including sand papering & preparing of surface and filled with wax / wooden putty and finishing with two coats of French polish to match with the colour with high class glossy finish in the furniture as per drawing all as specified and as directed

Locker steel 8 unit : Fd-127

Repairs/Removing of unserviceable legs and providing new legs in the furniture as per drg and all as specified and directed

Repairs/Removing of unserviceable shutters/Doors and providing new Shutters/Doors in the furniture as per drg and all as specified and directed

Repairs/Removing of unserviceable Lock and providing new lock in the furniture as per drg all as specified and directed

Repair/Removing of unserviceable Handle and providing new SS handle in the furniture as per Drg all as per specified and directed

M&L for removal of existing worn out paint from in side & outside including preparation of surfaces of frame completely and M&L for applying two coats of 1st quality synthetic enamel paint Olive Green over a coat of red oxide primer using spray gun all as specified, directed and shown on drgs.

Locker steel 6 unit : FD-127

Repair/Removing of unserviceable legs and providing new legs in the furniture as per drg and all as specified and directed

Repairs/Removing of unserviceable shutters/Doors and providing new Shutters/Doors in the furniture as per drg and all as specified and directed

Repairs/Removing of unserviceable Lock and providing new lock in the furniture as per drg all as specified and directed

Repairs/Removing of unserviceable Handle and providing new SS handle in the furniture as per Drg all as per specified and directed

M&L for removal of existing worn out paint from in side & outside including preparation of surfaces of frame completely and M&L for applying two coats of 1st quality synthetic enamel paint Olive Green over a coat of red oxide primer in two shades using spray gun all as specified directed and shown on drgs.

Almirah Large Steel 1/2H x 1/2S: FD 1033

Repairs/Removing of unserviceable legs and providing new legs and welding to Almirah large steel 1/2H 1/2S.

Removing of unserviceable locks with keys and providing new MS locks of size 50mm, 6 levers with stainless steel keys in duplicate for almirah large steel 1/2H, 1/2S,

Removing of unserviceable/broken handles and providing new decorative handle steel chromium plated for almirah large steel 1/2 H 1/2S

Removing of unserviceable/Broken Shutters/Doors and providing new Shutters/Doors, welding in the furniture and as per Drg all as specified and directed

Removing of unserviceable/broken Shelves and providing new shelves in the furniture as per drg and all as specified and directed

Removing of unserviceable/Broken conduit pipe and S&F the new conduit pipe in the furniture wooden as per Drg all as specified and directed

M&L for removal of existing worn out paint from external surfaces of Almirah large steel 1/2Sx1/2H including preparation of surface frame completely and M&L for applying two coats of 1st quality synthetic enamel paint Olive Green over a coat of red oxide primer in two shades using spray gun all as specified and directed and shown on drgs.

Book Case Steel with glass shutter : FD 1028

Removing of unserviceable/Broken Legs and Providing new leg in the furniture as per Drg all as specified and directed

Removing of unserviceable/Broken Glass of shutters and provding new 5 mm glass to shutters as per Drg all as speicfied and directed

Removing of unserviceable locks with keys and providing new brass locks of size 50mm, 6 levers with keys in duplicate for Book case steel

Removing of unserviceable/Broken shutters/Doors and providing new shutters/Doors as per Drg all as speicfied and directed

Removing of unserviceable/Broken Handle and provding new Decorative Handle as per Drg all as speicfied and directed

Removal of existing worn out paint from in side & outside including preparation of surface frame completely and M&L for applying two coats of 1st quality synthetic enamel paint Grey/Olive Green or direction by Engr-in-charge over a coat of red oxide primer using spray gun all as specified, directed and shown on drgs.

Mahesh Traders (BID ID -3085657)

GAJANAN SALES CORPORATION (BID ID -3085133)

Imprint Digitech (BID ID -3077761)

Unitech Enterprises (BID ID -3089826)

SARGAM ENTERPRISES (BID ID -3093244)

Bidder Name

Unitech Enterprises

Mahesh Traders

GAJANAN SALES CORPORATION

SARGAM ENTERPRISES

Imprint Digitech

VISHWAS ENTERPRISES