CONST. OF SUB MINOR AND W/C OF OR-47 THROUGH UGPL, EX. KM 100.500 OF CLMC.

Amount

DI Pipe : providing and supplying ISI mark centrifugaly cast(spun) Ductile iron pipe of 100mm and above all diameter for water works with socket and spigot ends confirming to IS 8329/2000 in the suitable working lenths of 4.5,5.5 and 6m suitable for classification K-9 suitable for push on joint (rubber gusket D joint with cement morter lining inside the pipes with outside zink with bituminous coating, rates are ex factory excluding transportation , taxes and duties, contractor profit and overhead charge etc. (1) 300mm dia pipe

350mm dia pipe

400mm dia pipe

450mm dia pipe

500mm dia pipe

600mm dia pipe

700mm dia pipe

750mm dia pipe

800mm dia pipe

providing and supplying in Standard lenths high density polyethyline (HDPE) Confirming to IS 4984-4984/14151/12786/13488 9 (latest revision with necessary jointing materials like mechanical connector i.e, thread /insert joint/quick release coupier joint/compression fitting joint or flanged joints excluding coupler/special and taxes). (1) 110 mm dia pipe

125 mm dia pipe

140 mm dia pipe

160 mm dia pipe

180 mm dia pipe

200 mm dia pipe

250 mm dia pipe

280 mm dia pipe

315 mm dia pipe

225 mm dia pipe

Excavated earth Earth work in excavation ( As per IS 3114/1965) for laying of different types and sizes of pipes so as to give one meter average cover over the socket of pipe with disposal of excavated earth with initial lead and lift as per specification and direction of Engneer in charge. (classification of soil item- B) 60% of excavated earth

Earth work in excavation in ordinary rock or soft rock (vide classification of soil item- C) with initial lead of 10m and lift of 1.5 m. including dressing making the sides in proper prpfile and dressing the bed in proper grade etc. all complete as per specification and direction of E/I. 40% of excavated earth

E/W in filling in foundation trenches and back filling of masonry structures with suitable earth in layers not exceding 150 mm thick well watered rammed and fully compacted and finely dressed with earth obtained from excavation of foundation trenches and kept at a lead of 30 m and initial lift of 1.50 m complete job as per specification and direction of E/I. ( 80% of excavated earth)

Supplying labours, tools,tackles lubricants etc. for laying and jointing C.I.S/S tyton pipes (class LA) in trenches without supplying rubber gasket and making gasket joints including providing night guard, barrier and red light to safe quard against accident all complete ( pipe to be supplied departmentally free of cost and laying of pipes is to be done as per I.S.S.3114-1985) As per design, specification of E/I. (1) 300mm dia pipe

350mm dia pipe

400mm dia pipe

450mm dia pipe

500mm dia pipe

600 mm dia pipe

700 mm dia pipe

750 mm dia pipe

800 mm dia pipe

Lowering, laying and jointing H.D.P.E / M.D.P.E pipes in proper position including all specials by compresion fitting / electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like electrofusion machine, electric heater / butt fusion welding machine with hydrolic jack, top loading clamp etc. all labours directed by engineer in charge as per IS 7634 PART-II. (MJP P-106) Section I/HDPE Pipes P-115 (1) 110 mm dia pipe

125 mm dia pipe

140 mm dia pipe

160 mm dia pipe

180 mm dia pipe

200 mm dia pipe

225 mm dia pipe

250 mm dia pipe

280 mm dia pipe

315 mm dia pipe

Providing and supplying ISI standard D.I specials & fitting with sealing rubber gasket of S.B.R complete with cast iron follwer gfland and M.S nuts & bolts coated or otherwise protected from rusting and suitable for D.I pipes including ED,CST, all taxes etc. as per IS-9523 but excluding freight. JH-WSD-SOR-part -B-M 1027+Inspection -1%,Transportation 10% & C.P @ 10% added. (1) Fitting 300 mm dia

Fitting 350-450 mm dia

Fitting 500-600 mm dia

Fitting Above-600 mm dia

proving double flange sluice valve ( size 50mm to 1200 mm) confirming for IS-2906/14846 including worn gear arrangements as per test pressure stainless steel spindle, caps transportation etc. all complete DWSD SOR items - M 1039B( without bypass arrangements) (1) 100mm

providing double flange sluice valve confirming for IS-2906/14846 including worn gear as per test pressure stainless steel spindle caps transportation etc all complete for rate including all taxes.( without byepass arrangement - PN -1.6) (JH-DWSD-SOR-M-1039-C (Scour Valve) (1) 100 mm

Supplying labour and tools for fixing C.I sluice valve in trenches with a pair of C.I Tail piece, including making lead caulked joints and flanged joints as per I.S.S specification including supplying all jointing materials (pig lead confirming to I.S.S 782-1978, yarn confirming to I.S.S 6587-1972 and nuts and boits confirming to I.S.S 1364-1983) including drilling holes in flanges if required as per specification and direction of E/I. (sluice valve and pieces to be supplied departmentally free of cost) (1) 100mm

Providing and supplying kinetic double Orifice type air valve confirming to IS 14845 as per MJP's standard speciafications combined with srew down isolating valve , small orifice elastic ball resting on a gun metal metal orifice nipple, large orifice vulcanite ball seating on a moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading , unloading, transportation upto deparmental stores excluding GST levied by GOI & GOM in all respect etc.complete. 80mm

Spplying labour and tools for fixing C.I. double acting air valve in trenches as per specification and direction of E/I.(C.I. double acting air valve to be supplied departmentally free of cost) 80mm

supplying tools and cutting road as well restoring the same as per specification and direction of E/I 64 Nos. of road crossing for different dia pipe (8 X 5X 1 ) (i) Pucca road cutting - 40% of JH-DWSD-SOR -3.1.19.1A

(ii) WBM, road cutting - 30% of JH-DWSD-SOR -3.1.19.1B

dismantaling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15 m lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. 40% of 40 x 0.15

Providing P.C.C. M-150 with nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6 mm size graded clean coarse sand of F.M. (2.5 to 3.0) including screening, shuttering , mixing cement concrete in mixer and placing in position, vibrating, striking, curing,( but excluding the cost of reinforcement ) taxes and royalty all complete as per building specification and direction of E/I. (same as item no-4)

Labour charge for one cutting of caste iron pipe and specials including supplying necessary tools and plants, chipping or filling the surface finish as per specification and direction of E/I. B211 300mm

Supplying labours, tools,tackles for testing of laid C.I or U.P.V.C or H.D.P.E or A.C. pressure pipe upto 60 m head of water all complete as per specification and direction of E/I. ( water to be supplied free of cost departmentally ) (1) 110 mm dia pipe

125 mm dia pipe

140 mm dia pipe

160 mm dia pipe

180 mm dia pipe

200 mm dia pipe

250 mm dia pipe

225 mm dia pipe

280 mm dia pipe

315 mm dia pipe

300mm dia pipe

350mm dia pipe

400mm dia pipe

450mm dia pipe

500mm dia pipe

600mm dia pipe

700mm dia pipe

750mm dia pipe

800 mm dia pipe

Earth work in excavation of foundation trenches in ordinary soil (vide classification of soil item- A) and disposal of excavated earth so obtained to a distance upto 50 m. including all lifts, levelling, ramming the foundation trenches removing the roots of trees, shrubs all complete as per approved design , building specification and direction of E/I.

providing coarse clean sand in filling in foundation trenches or in plinth including all materials , labour, royalty and taxes all complete as per building specification and direction of E/I. ( made of measurement compacted valume)

plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed , placed in foundation and compacted by vibration including curing for 14 days.

Providing precast RCC M-200 with nominal mix of (1:1.5:3) of desired size with approved quality of stone chips and clean coarse sand of F.M 2.5 -3.0 including curing, shuttering, carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement ) taxes and royalty all complete as per building specification and direction of E/I. ,

Supplying , fitting , and placing HYSD bar reinforcement in sub structure complete as per drawing and technical specifications. (1) 8mm

Providing 12 mm thick of cement plaster(1:6) with clean coarse sand of F.M 1.5 including screening , curing with all leads & lifts of water , scaffolding , taxes and royalty all complete as per building specification and direction of E/I.

Providing 12 mm thick water proof cement plaster(1:3) with clean coarse sand of F.M 1.5 with 5% Cico or any other water proofing compound including screening , curing with all leads & lifts of water , scaffolding , taxes and royalty all complete as per building specification and direction of E/I.

Providing designation 75A one brick on flat solling joints filled with local sand Including cost of watering taxes royalty all complete as per building specification and direction of E/I. ,

Providing designation 75A brick work in CM (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M 2.0 TO 2.5 Including providing 10 mm thick mortar joints , cost of screening , materials , raking out of joints to 15 mm depth , curing taxes and royalty all complete as per building specification and direction of E/I. ,

Plain/ Reinforced cement concrete(PCC M-15) in open foundation complete as per Drawing and technical specifications.

Plain/ Reinforced cement concrete(PCC M-20) in open foundation complete as per Drawing and technical specifications.

Providing R.C.C. M-200 with nominal mix of (1:1.5:3)) in roof slab (pump house) with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. (2.5 to 3.0) including screening,shuttering,mixing cement concrete in mixer and placing in position, vibrating, striking, curing ( but excluding the cost of reinforcement), taxes and royalty all complete as per building specification and direction of E/I.

Providing R.C.C. M-150 with nominal mix of (1:2:4)) in slab of desire shape with approved quality of stone chips and clean coarse sand of F.M. (2.5 to 3.0) including curing, shuttering , carrying the slab manually to site and lying in position all complete ( but excluding the cost of reinforcement ) taxes and royalty all complete as per building specification and direction of E/I.

Filling in foundation trenches and plinths in layer not exceeding 150mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50m and lift of 1.5m complete as per building specification and direction of E/I. ,

E/w in excacation of foundation trenches of toe wall, spillway, head regulator, outlet, intake well etc. as per design section in all kinds os soil including moorum soil, mixed with kankar, pebbles, & boulder upto 300mm size & disposal of the same beyond 50m away from the edge of the trenches) with initial lead of 150m & initial lift of 1.50m as per specification and direction of E/I. ,

supplying all materials , labours & tools and doing PCC M-15 (1:2:4) With approved quality of stone chips (20mm to 6mm) clean coarse sand of FM 2.5 to 3.0 including screening, shuttering , mixing cement concrete in mixer and placing in position , vibrating, striking, curing , taxes , and royalty all complete as per specification and direction of E/I.

providing and costing in situ cement concrete of trap/ granite / quartzite /gneise metal of approved quality for RCC work as per detailed drawings and design or directed by Engineer in charge including normal dewatering, centring, plywood formwork, bully / steel prop-ups, compaction, finishing the formed surface with C.M (1:3) of sufficient minimum thickness if special finish is to be provided and curing etc. complete ( by weight batching and mix design for M-250 and M-300 only. use of L&T , ACC, Ambuja, Birla Gold, Manikgad, Rajashree etc cement is permitted ) ( Excluding M.S or TOR reinforcement)

providing and costing in situ cement concrete of trap/ granite / quartzite /gneise metal of approved quality for RCC work as per detailed drawings and design or directed by Engineer in charge including normal dewatering, centring, plywood formwork, bully / steel prop-ups, compaction, finishing the formed surface with C.M (1:3) of sufficient minimum thickness if special finish is to be provided and curing etc. complete ( by weight batching and mix design for M-250 and M-300 only. use of L&T , ACC, Ambuja, Birla Gold, Manikgad, Rajashree etc cement is permitted ) ( Excluding M.S or TOR reinforcement)

Providing MS reinforcement as per approved design drawing including cost of cutting, bending , binding with annealed wire with removal of rust placing rod in position etc all complete as per specification and direction of E/I.

Carriage steel ( 69 P + 3K )

cement ( 69 P + 3K )

Sand (1K +13P + 3K)

Stone chips ( 3k + 69P +3K )

brick (1K + 22P +2K)

Cost of Annual Repair charges of OR-47 Through UGPL Work

Add GST @18%

Add Labour Cess @1%

Sudhakara Infratech Pvt Ltd