Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹28.0 L
EMD Value
₹28,000
Closing Date
30 Oct 2026, 5:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer (Central Tender Cell)
Central Tender Cell, BMC, ICOMC Tower, Unit-9, Satyanagar
Development of Defense Colony Park in Ward No. 07
2026_ORULB_143600_1
BMC-EE-Tender Cell-82/2026-27 dt. 13.10.2026
Open Tender
Civil Works - Others
Percentage
75 days
BMC AREA
Please refer Tender documents.
2 documents required · 2 mandatory
₹6,000
₹28,000
Yes
Office Chamber of EE(Central Tender Cell)
17 Oct 2026
17 Oct 2026
31 Oct 2026
17 Oct 2026
30 Oct 2026
17 Oct 2026
17 Oct 2026 - 22 Oct 2026
22 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earthwork by using hydraulic excavator of 1 cum bucket and depositing the excavated materials, including loading and unloading with all cost conveyance T&P sundries etc. complete as per direction of Engineer-in-Charge. | 89.65 | Cum | 209.95 | ₹18,822.02 |
| 2 | Filling plinth with sand in layers not exceeding 20 cm in depth, well watered and compacted , top surface dressed and levelled to proper gradient including cost and conveyance of sand , all taxes and royalties, loading and unloading, all labour sundries T&P etc. complete as per direction of Engineer-in-Charge . | 8.03 | Cum | 588.9 | ₹4,728.87 |
| 3 | C:C: (1:3:6) using 4 cm. size H.G. (C.B.) metal mixing with concrete mixer including the cost of all materials conveyance,curing, royalty & labour etc complete. | 18.88 | Cum | 6,209.68 | ₹1,17,238.76 |
| 4 | R.C.C. work of M20 grade with 20 mm down graded chips (C.B.) including hoisting & laying including centering & shuttering but excluding the cost of M.S. rod. RCC Column Base | 26.43 | Cum | 6,579.14 | ₹1,73,886.67 |
| 4.01 | RCC Plinth Beam | 10.15 | Cum | 7,459.18 | ₹75,710.68 |
| 4.02 | RCC Column | 4 | Cum | 18,398.94 | ₹73,595.76 |
| 5 | Supplying, fitting & placing uncoated HYSD reinforcement including cutting, bending,binding & placing the steel rods as per drawing & technical specifications with cost of binding wire 18 to 20 gauges, etc., complete. | 40.44 | Qntl | 9,552.47 | ₹3,86,301.89 |
| 6 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works for compound wall fencing. complete as per drawing including priming with one coat of red oxide primer in all floors as per the direction of the Engineer-in-charge. | 4,190.88 | Kg | 146.82 | ₹6,15,305 |
| 7 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 125.36 | Sqm | 705.94 | ₹88,496.64 |
| 8 | Supplying and Fixing of MS Bollard of 0.15m dia and 1.0m length made of MS pipe of 3mm thickness with fixing of 0.25m in ground by digging 0.45x0.45x0.45m earth work and grouting with CC(1:2:4) and 5nos 10mm square bar rings, top with cap and epoxy primer wth super coat paint etc complete as per direction of EIC. | 50 | Nos | 3,696.48 | ₹1,84,824 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.33 MB
BOQ_614150.xls
BOQ • 0.25 MB
DTCN_82.pdf
Tender Documents • 0.95 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .