PROVN OF FLOORING AT BLDG NO. T-135 (OFFRS MESS) AND ADDN/ ALTERATION OF BLDG NO. P-117 AT FRI HQ CIF(R) UNDER AGE(I) CIF(R)

Amount

Dismantling wall and ceiling boards (fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified.

S&F AC designer composite ceiling board 4 to 6mm thick in 600x600mm panel confirming to IS-14682 TYPE-B category-3 including GI frame, holdfast and suspenders complete all as specified.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

S&F Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

S&F Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

Dismantling of mild steel or wrought iron work of any description not otherwise provided for complete all as specified.

Mild steel rolled work as in roof trusses ( framed) , trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing( Beam, tee, angle, channel or flat sections ) including distance pieces, cleats etc. , conforming to grade Fe 410-w Gde E-250 Quality A complete all as specified

Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water complete all as specified.

M&L for 15 mm thick rendering on fair faces of brick work or concrete surface using WPC in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified. Note:- WPC shall be measured and paid for separately.

M&L for10 mm thick rendering on fair faces of brick work in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified.

Supply only integral water proofing compound, all as specified .

Preparation of new plastered surfaces of wall and applying two coat of Oil bound distemper including primer over a coat of 1mm thick birla white putty complete all as specified.

Preparing plastered or unplastered old surfaces of walls, including complete removal of existing treatment and applying two coats of oil bound distemper over a layer of brila white putty, complete all as specified.

Preparation of new plastered or unplastered decorated surfaces of wall and applying two coats of cement base paint over one coat of chalk whiting complete all as specified.

M&L for applying one coats of cement base paint on walls after preparation of old surfaces complete all as specified.

M&L for preparation of new wooden or wood based surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L for preparation of steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified.

M&L for preparation of old steel and iron surfaces of any description, exceeding 10 cms in width or girth and applying one coat of synthetic enamel paint complete all as specified.

M&L for 50 mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection finished even and fiar without using extra cement, complete all as specified and as directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frames) area not exceeding 1.5 Sqm each including cutting holes for taking out hold fasts, dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4.0 Sqm each including cutting holes for taking out hold fasts, dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and directed.

Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete.

S&F 30 mm thick plain framed panelled door shutters of 2nd class hard wood (Factory made) two panel with lock rail and panel of 9mm thick BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 Part-I, Kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood plain framed factory made glazed and skelton shutters open rebated and prepared to receive glass/ wire gauge etc (without sas bars)edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for secring glass,etc size of members of shuters as specified in SSR Part-I,Section 8, clause 8.24 (a); supply and fitted to chowkhats, all as specified.

S&F Galvanised mild steel wire cloth 0.56mm of nominal dia of each wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples.

M&L for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and directed.

S&F steel window (box type) factory made with side hung glazed shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all specified. including one shop coat of red oxide primer complete all specified. Note : (i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 (ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

Description all as per Srl Item No.27 here in before but without glazing bar. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gde E-165, all as specified .

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square n exc. 0.50 Sqm in each pane all as specified.

S&F aluminium alloy, sliding door bolt 250 mm long with hasp, staple ( bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, all as specified.

S & F 150 mm aluminium anodised barrel tower bolt of extruded section and fixed,complete all as specified and directed.

S&F 150 mm size, extruded aluminium alloy handles, fabricated type, anodised.

S&F butt hinges 100mm, cold rolled medium weight mild steel all as specified.

S & F Second class hard wood small fittings such as brackets of any type, shaped door and window stops and the like including all necessary Labour; articles not exceeding 200 Cu.Cm each.

Harrison curtain rails , mild steel , chromium plated with fixing brackets, stops, rollers etc, all as specified and directed by Engr-in- Charge.

S & F in repai mild steel , 300 mm, ordinary rat tail rod pattern door spring including roller and roller plate complete, all as specified.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified.

Reinforced cement concrete M-25 (Design Mix) using 20mm graded stone aggregate as in chajjas, complete all as specified.

Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, contilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. rough furnished surface of concrete complete flat, all as specified.

Material and labour for 10 mm dia and over TMT bars, cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified.

Material and labour for 8 mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified.

Surface excavation not exc 30 cm deep and averaging 15cm and getting in any type of soil complete all as specified and directed.

M&L Hardcore of gauge not exc. 63 mm, Broken stone or boulders deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L for 75mm thick Plain cement concrete type E-2, 1:5:10 (40mm graded stone aggregate) finishing cement concrete surface even and smooth by using extra cement etc complete

M&L 25 mm thick Sand filling under floors or in foundations including watering and consolidation for laying of interlocking tiles complete all as specified and directed

S& F coloured machine vibro mechenically floated glossy finish interlocking cement paver block, ISI Marked any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with topping of cement mixed with imported pigment,colour and shape shall be approved by engr-in-charge .

Removing surplus spoil to a distance not exceeding 50m and deposited where directed at a level not exceeding 1.50m from the starting point., all as specified .

Demolition of brick work / stone masonry built in cement mortar or cement lime mortar including all quoins ,arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and directed.

M&L for Brickwork with old size sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cm (1:6), complete all as specified and directed by Engineer-in-charge.

All as per description of item 50 above but except bricks complete all as specified and directed

M & L for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in fixing of hold fast, coping, band, parapets and railing upto 60 cm in hieght, bed plates, lintels upto 1.5m clear and similar items including weathering slightly rounded or chamferred angles and throughting including necessary form work, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as directed.

25mm thick PCC (1:2:4) type B-0(using 12.5mm graded stone aggregate) as in sub base for laying floor finishes complete all as specified and directed.

M&L for Makrana white marble 18mm to 20mm thick machine cut, bedded, jointed with grey cement slurry and pointed with grey cement slurry including cutting and polishing complete all as specified and directed.

Green/Black granite on shelves 18 to 20 mm thick set jointed with 3.00 kg per sqm neat cement slurry and pointed with coloured cement to match the surface complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 laying floor finishes complete all as specified.

Coloured durastone heavy duty vitrified tiles 8-10 mm thick Sq/rectangular tiles area of each tile not exceeding 0.36 Sqm as in floors set and jointed in neat cement slurry and pointed in clooured cement to match the surface complete all as specified and directed. Note : The contractor shall have no claim on difference what so ever on shade /colour of tile.

M&L for preparation of newl surfaces for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of ₹ 20,295.00 during AOC Note:- Tenderers shall not quote for this Schedule

M/s Chopra Constructions (BID ID -3468917)

NATIONAL TRADING COMPANY (BID ID -3474546)

M/S RAHUL GUPTA (BID ID -3466178)