Repair Polishing Painting of all Wooden and Steel Furniture at INS Mandovi under GE Gomantak

Amount

A) Removal of following existing unserviceable components of various furniture items given below carefully without disturbing the adjoining parts and supply & fixing new components confirming to IS and as approved as mention below.All steel surfaces from inside and outside shall be given two coat of existing synthetic enemel paint over a coat of red oxide metal primer after tightening the joints,placing every part in tact. B) Work shall be executed at Nofra-I & II, INS Gomantak, Varunapuri, INS Hansa, 2W DET, MO Goa, NCB and other area where the furniture exist in different User Units of GE Gomantak including BSO's Furniture Yard as directed by Engineer-in-Charge.

Almirah Large Steel Half Hanging Half Shelf /Cadet steel (FD-114, FD/E6/MAP/18, WDF-49/07)

a) 3-Way locking assembly with iron plate and 02 Nos rod 10mm and lock cover

b) Handle as per drg

c) Leg as per drg

d) Door as per drg

e) Shelf as per drg

f) MS Lock as per drg

g) MS Hinges as per drg

h) Looking mirror as per drg

j) Spot welding of broken joints not exceeding 25 mm in length including painting the welded parts to match with existing as per drg.

Almirah Large Steel with shelves/Glazed (FD-67(M), FD-1031, FD-104)

a) 3-Way locking assembly with iron plate and 02 Nos rod 10mm and lock cover

b) Handle as per drg

c) Leg as per drg

d) Door as per drg

e) Shelf as per drg

f) MS Lock as per drg

g) MS Hinges as per drg

h) Glass as per drg

j) Spot welding of broken joints not exceeding 25 mm in length including painting the welded parts to match with existing as per drg.

Almirah Steel Medium with shelves (FD-1032, FD-67, FD-243, FD-350)

a) 3-Way locking assembly with iron plate and 02 Nos rod 10mm and lock cover

b) Handle as per drg

c) Leg as per drg

d) Door as per drg

e) MS Hinges as per drg

f) Shelf as per drg

g) MS Lock as per drg

h) Spot welding of broken joints not exceedind 25 mm in length including painting the welded parts to match with existing as per drg.

Locker Bed side Steel (FD 1029)

a) Handle as per drg

b) Leg as per drg

c) Door as per drg

d) Shelf as per drg

e) Hasp & Staple as per drg

f) Alluminium rod

g) MS Hinges as per drg

h) Spot welding of broken joints not exceedind 25 mm in length including painting the welded parts to match with existing as per drg.

Book Case Steel/ Book shelf open large steel (FD-90, FD-1028,69(M),237,356)

a) New Glass as per size and Drg

b) Handle as per drg

c) MS Lock as per drg

d) Spot welding of broken joints not exceedind 25 mm in length including painting the welded parts to match with existing as per drg.

Chair Computer / Revolving (FD/E6/MAP/01, TP)

a) Chair Base PVC with five wheels as per drg

b) Arm as per drg and as directed by Eng in charge

c) Caster Wheel as per drg

d) Tapestry of seat & Back as per drg

e) Hydraulic system of chair all as per drg and as directed by eng in charge

f) To fix nut and bolt of chair computer as required

g) U/S Seat & back Completealongwith seat ply foam cushion and tepestry as per drg

g) Removing U/S PVC beading from seat and back of existing chair writing and S&F new PVC beading in eat and back of chair wrting as per drg.

Chair writing / Chair Visitor (FD/E6/MAP/12, TP)

a) Removing of existing U/S seat ply including cushion foam and tapestry of chair wiriting MAP and S&F with new seat ply including cushion foam and tapestery as shown in drg.

b) Removing of existing U/S back ply including cushion foam and tapestry of chair wiriting MAP and S&F with new back ply including cushion foam and tapestery as shown in drg.

c) Removing of existing U/S tapestry of seat & back of chair wiriting MAP and S&F with new tapestery as shown in drg.

d) Removing of existing U/S handle of chair wiriting MAP and S&F with new handle as shown in drg.

e) Rejoining the base of stiffner with spot welding of broken joints not exceeding 25mm in length as and where required as per drg.

f) Removing U/S PVC beading from seat and back of existing chair writing and S&F new PVC beading in eat and back of chair wrting as per drg.

Chair Verandah (FD-256, 359)

a) Removing of U/S canning of seat of chair verandah and recanning of seat of chair verandah with new cane as per drg

b) Removing of U/S canning of back of chair verandah and recanning of back of chair verandah with new cane as per drg

b) PVC Seat & back

Chair School with Hand Board (FD/E6/MAP/17)

a) Hand board made of pre lamineted MDF board 18 mm thick exterior grade confirming to IS with PVC beading all around as per drg

b) PVC Seat in blue colour as per drg

c) Spot welding of broken joints not exceedind 25 mm in length including painting the welded parts to match with existing as per drg.

Chair CB steel with Arms (FD-75)

a) Seat made of 40 thickwith 32 density cushion on 12mm thick plywood with rexin of good quality along with provision of MS flateron 470x 25x3mm(02) Nos duly weilded for both side of seat to rest and strengthen as per drg

b) Back made with 40mm thick with 32 density cushion on 12mm thick plywood with rexin of good quality

c) Arm rest as per drg

d) Spot welding of broken joints not exceedind 25 mm in length including painting the welded parts to match with existing as per drg.

e) Welding Clits made out of MS flat bar 25mm X 3mm thick and 40mm long with a hole to to fix the seat & back as per drg

Table Office Clerk Steel (FD-84(M), FD-381)

a) Legs as per drg

b) Lock of drawer as per drg

c) Drawer as per drg

d) Stiffeners as per drg

e) Spot welding of broken joints not exceedind 25 mm in length including painting the welded parts to match with existing as per drg.

f) Top of table shall be made of pre lamineted MDF board 18 mm thick exterior grade confirming to IS with 6 mm teak wood beading all around as per drg as directed by Eng in Charge.

Table Office Officer Steel (FD-84(M), FD-1002, FD-1003)

a) Legs, as per drg

b) Lock of drawer as per drg

c) Drawer as specified & as directed by Engr-in-charge

d) Stiffeners as per drg

e) Spot welding of broken joints not exceedind 25 mm in length including painting the welded parts to match with existing as per drg.

f) Top of table shall be made of pre lamineted MDF board 18 mm thick exterior grade confirming to IS with6 mm teak wood beading all around as per drg as directed by Eng in Charge.

Table bed side steel (FD/E6/MAP/ 15)

a) Legs, as per drg

b) Top as per drg

c) Table sides as per drg as directed by Engr in Charge.

d) drrawer as per drg

e) knob / handle as per drg

f) back ply as per drg

g) Replacement of u/s telescopic channel from drawer as per drg

h) Spot welding of broken joints not exceedind 25 mm in length including painting the welded parts to match with existing as per drg.

Table 3x2 with /without drawer (FD- 1007,1008)

a) Legs as per drg

b) Lock of drawer as per drg

c) Drawer as per drg

d) Stiffeners as per drg

e) Spot welding of broken joints not exceedind 25 mm in length including painting the welded parts to match with existing as per drg.

f) Top of table shall be made of pre lamineted MDF board 18 mm thick exterior grade confirming to IS with6 mm teak wood beading all around as per drg as directed by Eng in Charge.

Teapoy Varandah (FD-35, 255, FD/E6/MAP/17 )

a) Legs, as per drg

b) Top shall be made of pre lamineted MDF board 18 mm thick exterior grade confirming to IS with6 mm teak wood beading all around as per drg as directed by Eng in Charge.

C) Spot welding of broken joints not exceedind 25 mm in length including painting the welded parts to match with existing as per drg.

Table computer (FD/E6/MAP/03)

a) Top shall be made of pre lamineted MDF board 18 mm thick exterior grade confirming to IS with6 mm teak wood beading all around as per drg as directed by Eng in Charge.

b) Spot welding of broken joints not exceedind 25 mm in length including painting the welded parts to match with existing as per drg.

c) Telescopic channel of key board

d) Telescopic channel of drawer

e) Replacement of key board Make of MDF Board as per drg

PVC Shoe for all types of, Tables,Chairs,Teapoy Verandah, Table bed side ( FD/E6/MAP/12, TP FD/E6/MAP/17, FD-75, FD-1009, FD-84(M), FD-381, FD-84(M) , FD-1002, FD-1003, FD/E6/ MAP/ 15® , FD-35,FD 255, FD/E6/MAP/17)

B) M&L for preparing all old painted surface and removing dents & bents if required of following items and applying two coat of synthetic enamel paint of TA GREY/OG/BLACK or Existing color and all external surface complet. B) Work will be executed where the furniture exist in different User Units at OTM/Md Accns at INS Mandovi under the jurisdiction of GE Gomantak Vasco including BSO's Furniture Yard and all as directed by Engineer-in-Charge.

Almirah large 1/2 H-1/2 S /Cadet steel (FD/E6/MAP/18, WDF 49/07, WDF 116)

Almirah large Steel with shelves/glazed (FD 104 M ,67 FD 114, FD 1031, 351)

Almirah Steel Med with shelves, 1/2 H 1/2 S (FD 104 M, 243, 67 FD 1032,243,350, FD 114M)

Book Case Steel / Book Shelf open steel all type (FD 104 FD 90M FD-1028 FD 356 FD 69M, DB-4121)

Chair CB Steel with Arms (FD 75M)

Chair writing steel (MAP) /Chair visitors ( FD/E6/MAP/12)

Chair School with hand board Chair desklet (FD/E6/MAP/12 TP)

Chair Verandah (FD-256, 359)

Locker Bed side Steel (FD 1029)

Rack shoe steel (FD/E6/MAO/02)

Rack Side steel three space /four space (FD 1023,97)

Rack Stationary steel (FD 81)

Stool steel 305x305x510mm/760mm (FD 81)

Table Office Offr Steel (FD 84 M, 1003, 1002)

Table Office Clerk Steel (FD 84 (M) 1004,1084,381)

Tepoy Varandah (FD 35,255, 383, FD E6 /MAP/17)

Table 3 x 2 steel (FD-1008)

M/s Mitesh Agencies

Mahesh Traders

Lucky General Engineers and Contractors