Providing Special Maintenance Repair works to 76 TNGRHS taylors road

Amount

Painting the old ceiling one coat with cement paint of best approved quality including thorough scrapping the existing old surface, including cost of paint, brushes, scaffolding and labour charges for painting etc., complete in all respects with relevent standard specifications and as directed by departmental officers

Painting the old wall with two coats of I-class plastic emulsion paint of best approved quality and colour incuding cost of paint, brushes, primer, scaffolding, thorough scrapping the old surface etc., compete in all respects with relevant standard specification and as directed by departmental officers.

Painting old wood work with one coat of I-Class ready mixed synthethetic Enamel paint of best approved quality, including thorough scrapping the old surface, cost of paint, brushes, and scaffolding and labour charges for painting etc. with relevant standard specification and as directed by the departmental officers

Painting old iron work with one coat of I-Class ready mixed synthethetic Enamel paint of best approved quality, including thorough scrapping the old surface, cost of paint, brushes, and scaffolding and labour charges for painting etc. with relevant standard specification and as directed by the departmental officers.

Removing the following broken electrical materials and refixing the following materials of good quality Anchor make Dyna white with the ISI mark inlcuidng connection , testing and commissioning etc. all complete and as directed by departmental officers.

16Amps switch with universal socket and indicator (Combined Set)

6 amps switch 4 Nos & 1 No socket only (Combined Set)

Gong Bell 9'' suitable for 250v

Fan regulator - Stepped electronic square type

PVC Round Block

Slant holder

AC Metal Clad 20 Amps socket with MCB for AC unit

6Amps switch 1no (Combined set)

6Amps switch 1no,socket 1no with indicator (combined set)

16Amps switch with indicator (Combined Set)

Removing the corroded unworkable CP fittings from its position and refixing new metro brand CP fitting with CP flange of best approved quality (Metro brand) including cost of scrap value of old materials labour charges for removing and refixing etc. all complete and as directed by the departmental officers.

CP long body - Bib cock with omega handle 15mm dia with CP flange (Metro brand)

EWC PVC Seat double flapped seat Cover (Parryware)

Health faucet with 1.50m tube connection (Metro Brand)

PVC waste pipe 1m length

CP waste coupling 20mm dia

Stainless steel Grating 100x 75mm

CP Pilller cock with CP flange (Metro brand)

PVC Connection Hose

Aluminium Bracket

Providing and fixing magnetic door catcher best quality including cost of new materials and labour for removing and refixing etc. all complete and as directed by the departmental officers.

Removing the damaged unworkable entrance door lock from its position and refixing new mortise lock, brass Décor type 6 levers lock with keys including cost of materials,scrap value of old materials and labour charges for fixing etc., all complete and as directed by the departmental officers. (The brand shall be got approved by the EE & Ad.O before supply)

Providing new brass door stopper of heavy type for replacing the existing damaged door stopper including cost of new materials and labour for removing and refixing etc. all complete and as directed by the departmental officers.

Labour charges for Dismantling the damaged plastering in the walls and packing the joints with cement morter mixed with bonding agent and finished the surface with good cement neatly etc all complete and as directed by the departmental officer

Supplying and fixing of Tubelight (LED) of best and approved make with necessary teak wood round block of 75mm dia 40mm deep on walls/ceiling including cost of materials,scrap value of old materials and labour charges for fixing etc., all complete and as directed by the departmental officers.

Removing and Refixing Service door frames and shutters for making good movement of shutter for closing and opening position by engaging carpenter including cost of hire charges for plaining materials and labour charges etc. all complete and as directed by the departmental officers.

Reworkable and removable of movementable panels Servicing Aluminium sliding windows and fixing the same glassand changing Rubber beeding above the glass panels, replacing the lock,changing the movementable handle including cost of materials and labour charges for removing and refixing etc.,all complete and as directed by the departmental officers.

Supplying and fixing of Fiber Netlon of best and approved quality to windows and openings including cost of netlon, Velcro and nails and lobour charges for stitching & fixing etc. all complete and as directed by departmental officers.

Supplying and Fixing of Teak wood reeper of size 50mm x 25mm to withstand the Netlon in the existing Aluminium windows alround including the cost of teak wood reeper and labour for fixing in the position complete.and as directed by the departmental officer

Brick work in cm 1:5 using 2B categroy stock bricks of size 9"x4-3/8"x2 3/4" for 10 Cum including cost of bricks,labour charges, curing etc., all complete and as directed by departmental officers

plastering the New wall with cement mortor 1:5, 12 mm thick using the river sand including curing and finising neatly complying with standard specification and as directed by the departmental officers.

Dismantling and Removing the Floor tiles, wall tiles in kitchen flat form and removing the cuddapah stone in working platform of kitchen without damaging the existing structure clearing away the debris away from the site to a initial lead of 1 Km including cost of labour etc., all complete

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in cement mortor 1 : 2 (One cement and two sand ) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 kg / Sqm . neatly in all floors, curing, etc ., complying with standard specification and as directed by the departmental officers.

Laying Flooring with following ceramic tiles of size 305 x 305 x6 mm laid over 20mm thick cement mortor 1:3 (One cement and three sand) base mortor over the existing slab / floor including cutting the tiles to the required size with special cutter whenever necessary , laying in position pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. Sq.m etc., complete complying with standard specification .

Removing the broken porcelain sink and refixing the new stainless steel sink of superior quality Superior quality ( Butterfly / Diamond ) of size 36" x 18" with drain board including cost of sink labour charges for fixing charges with required accessories etc. all complete and as directed by the departmental officers.(The Brand/Quality of the sink has to be got approved by the EE before fixing)

Solid Panel PVC door without frame shutter of size (1X0.66X2.05m) using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheet for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter.etc. complete and as directed by the departmental officers.The materials should be got approved by the EE&ADO before use

Supply and fixing Stainless steel 1" pipe Heavy duty with 2no of S.S Clamp cost of materials,labour charges and necessary screws etc.,all complete and as directed by the departmental officers.

Pre-Painted Galvanized Iron Two Track Sliding Window:Providing and fixing pre-painted two track, two panel slidingsystem fabricated from roll formed sections made ofgalvanized steel powder coated (Base steel as per IS 513 'D'quality, galvanized as per IS 277 with zinc of 120 grams /sqm.) with total coated thickness of 0.58mm.Paint specification: Coated sections should be with primercoat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coatedwith alkyd backer of 5-7 microns. Dimensions of sections: Section for frame two track shouldbe of 59mm x 44mm, section for shutter should be of 35mmx 49mm for window, section for euro groove should be of25mm x 24mm and for lap strip should be 30mm x 41mm.Fixing details: The frame and shutter sections should be cutto length, joined with corner brackets made of glass fillednylon. Ethyl Propylene Diamine Monomer (EPDM) Gasket should be used all around glass.Accessories: Corner brackets made of glass filled nylongasket made of Ethyl Propylene Diamine Monomer (EPDM). Locking system should be of single pin locking for Windows.Single wheel rollers for windows should be provided.Glass: Glass shutter and fixed glass portion should beprovided with a glass of 4mm pinhead glass. Window frame should be fixed to brick / concrete masonry byusing nylon self-expanding caps and driving MS electroplated 80mm long screws into the caps through frames.

Supplying and fixing of CP towel rod 75mm long fancy type including cost of towel rod and labour charges for fixing etc all complete and as directed by the departmental officers.

Providing additional19mm thick BWR grade plywood plank for ward robe cupboard with lipping alround painting the same with two coats of synthetic enamel paint of best approved quality including cost of all materials ,labour for fixing,painting etc., complete with standard specification and as directed by the departmental officers.

supplying and fixing of 19mm plywood BWR grade BOX TYPE cupboard with necessary beading,lamination sheet ,Italian hinges,ornamental handle,brass lock,fevicol, etc., all complete and as directed by the departmental officers.

Providng Sliding cupboard with Country Wood scantlings of size 3" x 1 1/2" alround and for verticals,water proof 19mm thick BWR plywood for door shutters and finishing the Both side with lamination sheet (Sunmica) including cost of labour ,materials and painting etc., complete with standard specification and as directed by the departmental officers.

Sub Total

GST at 18%

Sabari Designs (BID ID -1266401)