DA/ST/1559/NC3I/IMAC/100

Prefabricated/ pre -engineered structure for waiting area, for Conference hall & common area as per approved drawing made of steel structure and partition wall, false ceiling including wiring and fittings, doors, windows ,flooring as requirement. Also cabin will be duly painted with the branded paint make Following work will be included in the above prefabricated structures:- (a) Pre laminated wooden flooring with PVC sheet 0.3mm thick & 6mm heat loan under flooring all flashing corner & joint profiles. (b) False ceiling made of 600x600 mm t grid with main All electrical work required for the day needs of the office/conference including 2'x2' LED down lights and fans as required. Also all suitable sockets for incorporating single pole/triple pole MCB on wall/on existing pedestal complete. Wiring for light point/fan/exhaust fan/call bell switches will be modular switches fixed with suitable GI box and wired with 1.5sq mm insulated copper wire. (c)Energy saving type ceiling fans with double ball bearing motor-blades, downrod, canopy, capacitor, etc. Suitable for operation on 230 volts 50 Hz ac supply complete as required size 1200 mm. exhaust fan will be heavy duty of 230 volts 50 Hz ac supply complete as required size 1400rpm exhaust fan. (d) Structure comprising of prefabricated/Porta Cabin type structure made of steel columns & puling made of hot mild steel section which will be fabricated according to the required design. All steel parts/members painted with red oxide primer roof with G I colour coated sheet of 0.5mm thick with non-asbestos fiber reinforced aerated cement sandwich modules made of light weight fiber aerated cement/concrete core composed of Portland cement, flyash, binders , etc. and 4mm thick non asbestos fiber IS 14862:2000 on either side of the core having tongue and groove on longitudinal side of the modules are erected/installed using Galvanized Iron Steel tracks of 1 mm thick track for fixing to the floor & top of the wall respectively including all necessary material required for erecting and fixing the wall panel/corner flashing complete as per the approved design panel size will be 2400x600mm/panel requirement will be approx. 15 in nos. Also fixing of gypsum board paneling with GI grid section including joining and fixing of 12mm thick paneling with GI grid section. (e) Applying two or more coats of O.B.D painting of approved colour shades & brand the job will include primer coat and putty work filling etc. complete

Air Purification and humidity control units 1.5 ton each with voltage stabilizers and all piping and copper piping and electrical wiring

Altering of existing partition

Providing and fixing of partition wall made of GI section insulation with 50mm glass wood both side 8mm cement fiber board with jointing an tapeing duly painted

Providing of frame 12mm thick toughened door with modular fixtures and locking system.

Providing and fixing of aluminium power coated window with 6mm glass size 7 ftx4ft with all modular fitting

Providing and fixing of fall ceiling made with GI/wooden frame and finishing with fabrication board ,flexible ply duly painted as per approve design by officer in charge

Providing and fixing of LED panel light 32 watt 600*600mm with fitting

Heavy duty electric wire with PVC conducting pipe for workstation, fall ceiling , LED panels , light , fan , etc. with modular switch ,socket & fixture.

Wiring for internal telephoning system with PVC conducting pipe and junction boxes.

Providing and laying of lane & computer wiring with PVC conducing for all workstation ,conference tables & led panel.

Providing and fixing of glass partition made with top & bottom wooden designer partition finishing with 1mm thick laminated sheet & PU polish & 12 mm thick toughened glass with modular fixture

Providing and laying of base putty & oil base premier & finishing with 2 nos. coat of plastic paint for old wall

Providing and fixing of acrylic carpets 12mm thick with 4mm layer of heat loan for extra cushioning

Digital time clock 5 displays in 1 10"x66" with all fixtures

Sun film with logo of IMAC & IFC- IOR

Providing and laying of digital 3D wall paper

Providing and fixing of zebra type window blinds with all fixture

Heavy duty cabling race way with fixtures

Providing and fixing of wooden wall paneling with base frame GI/wooden grid with all flashing & fixture

Providing and fixing of designer wooden paneling for LED light wall made with Korean wood/HPL board with GI/aluminium frame grid finishing with all fixture

Providing and laying of 3D wall paper

LAN and computer wiring

Providing and fixing of acrylic carpets 12mm thick with 4mm layer of heat loan for extra cushioning

Fabrication of conference table with all modular fixture & electrical plug wiring etc. for 28 persons made with 20mm thick water proof board with S/steel frame under table [304], drawer prevision of draw cabinet under table , international socket panel 10nos, table race way & finishing with 2mm thick ACP sheet/1mm thick designer high gloze laminate.

Sofa two seat with PU leather upholstery made with marandi wood frame with all fixtures

Storage Cabinet made with 20mm thick wooden board modular fixtures with 1mm thick designer laminate size 7'x4'

Providing and fixing of acoustic wall panel made with acrylic carpet 7 arm stone wooden composite wall panelling support, GI grid frame & fixtures

Dining table for four persons with wooden dining chairs made with teak wood top with Italian stone finish.

Outdoor centre table for three persons with outdoor caste iron chair

Acrylic all weather Artificial Grass

Fabrication of designer cubical work station with storage space made with wooden water proof 200mm thick board & finishing with all modular designer laminate/ACP sheet with all modular fixture, CPU trolley, electrical plug panel, key board tray, pedestal drawer storage, race way etc.

Conference table with all modular fixture 7 electrical plug panel wiring etc. for 10 persons made with 20mm thick water proof board & finishing with S/steel frame under table of 304 grade, drawer provision of draw cabinet under table, socket panel 4 in nos., table race way & finishing with 2mm thick ACP sheet/1mm thick designer high gloss laminate.

Chair Revolving Medium Back. 360 Degree swivel, posture control with multilocking position synchronized mechanism with backrest with lumber support of polypropylene at multilevel across back

Chair Revolving High Back with arm rest. Central tilt type, leatherette fabric material for seat cover.

LED 3D board sign board with all the fixture and electrical fittings and adapter for main door size 18"x84"

LED light 3D board sign board with all fixture and electrical fittings and adapter and wiring for both the sides of the main door 18"x18"

Providing and fixing of display cabinet & Panelling for LED monitor with lights and wiring made with the Korean wood/ HPL board with GI/aluminium frame grid finishing with all fixtures.

Fabrication of conference table with all modular fixtures & electrical fitting and panel wiring for 6 persons made with steel frame under table of grade 304, drawer provision of draw cabinet under table, with international fittings of socket panel 4 in nos. table race way & finishing of table with 2mm thick ACP sheet/1mm thick designer high gloss laminate sheer.

Round centre table with designer top of stone & three cough chair.

Wooden dining table with 6 in nos. chair made with teak wood and PU polish finish.

Designer centre table made of teak with PU polish finish table top of Italian stone.

Providing and fixing of view cutter made of wooden board, 3D panel HPL sheet with carving and design work duly polished.

Display book rack fabricated with wooden frame duly PU polish finishing.

Storage wooden cabinet made of 20mm thick wooden board with all modular fittings duly laminated from both the sides with 1mm thick designer laminate.

Fabrication of airport type sleeper couch made with wooden/steel frame single cushion seat.

Refurbishment of 4 in nos. toilets Changing of damaged tiles with new ones Repairing of drainage pipes leakage Change of existing bathroom fixtures as per approved design and the sample checked by the user Bathroom accessories Glass cubical Hand dry Looking mirror Urinal to be changed Wash basins Vanity for keeping toiletries Exhaust fan Lighting arrangement to be appropriate Door fittings to be rectified Door alignment and polishing work Painting of the bathroom of desired colour

ANANYA ENTERPRISES