Renovation and upgradation

Amount

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 100 m lead For thickness of tiles above 25 mm and up to 40 mm

Making the opening in brick masonry for door / window / clear story opening including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface including disposal of mulba/ rubbish to the nearest dumping ground

Dismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and dispoal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge

Dismantling plain cement concrete manually / by mechanical means carefully without damaging adjacent structures including disposal of debris within 200 m lead as per direction of Engineerin-charge

Dismantling brick bat coba cement based water proofing over roof and chajjas carefully without damaging adjacent structures including lowering and stacking of materials and dispoal of unserviceable materials within 200 m lead as per direction of Engineer-in-charge

Dismantling WC Pan, EWC, Wash basin, Urinals of any size including stacking of useful materials near the site and disposal of unsurviceable material within 50m lead as per specification or as directed by Engineer-In-Charge.

WC Pan

Wash Basin

Urinals

Dismantling doors, windows and clear storey openings (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100 m lead (full windows) Of area 3.00 Sq.M and below

Dismantling Aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplaus material and stacking of serviceable materials within 100 m lead as directed by the Engineer-in-charge

Dismantling G.I pipes of all diameter external work including excavation and refilling trenches after taking out pipes manually / by mechanical means including stacking of pipes within 100 m lead as per direction of Engineer-in-charge

Dismantling the following dia of C.I pipes including excavation, taking out the pipes manually / by mechanical means, breaking lead caulked joints, melting of lead, making into blocks including stacking of pipes within a lead of 200 m as per direction of Engineer-in-charge

75 mm Dia to 200 mm Dia C. I pipe

Dismantling C.I pipes of following dia in shafts / open piping including taking out the pipes manually, breaking lead caulked joints, melting of lead, making into blocks including stacking of pipes within a lead of 200 m as per direction of Engineer-incharge

75 Dia C. I pipe

100 Dia C. I pipe

Dismantling cement asbestos, Celotax or other hard board ceiling or partiton walls including stacking of serviceable materials and disposal of unserviceable materilas within 100 m lead

Lead charges for 1st 1 KM or part thereof, by mechanical transport including loading unloading, stacking / levelling etc.

Debris up to 1 km

Providing and Laying Autoclaved Aerated cement block masonry of approved make with specified thick AAC Blocks in Super structure above plinth level up to 20 m height in cement mortar 1:4 (using crushed sand). The rate shall also include providing and placing in position 2 nos of 8 mm dia bars at every third course of the masonry work

Providing and laying in position cement concrete of 1:2:4 (1 cement, 2 crushed sand, 4 graded stone aggregate of nominal size 20 mm) including consolidation, finishing, curing etc. complete as per specification and drawings but excluding the cost of Formwork shuttering, centering and steel reinforcement at all Levels

Providing and laying in position Reinforced Cement Concrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications up to Plinth Level.

Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. Steel supplied by the contractor

Using TMT bars of specified grades all dia bars. TMT bars to be supplied by the contractor manufactured by other than SAIL, RINL or TATA and approved brands of BARC only

Providing, centering, shuttering Form work using steel plates, timber planks for all types of structures including necessary strutting, proping, staging, supports, bracings etc. and deshuttering the same after the specified time all as per drawings, specifications and as directed by the Engineer-incharge at all levels

For Super Structure

Providing and fixing Minimum 17 mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut Granite of Telephone Black colour for kitchen platforms, vanitiy counters, Wash basin Counters, Door Frames, window sills, facias and similar locations of required size, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete as directed by the Engineer-in-charge at all levels

Providing and laying minimum 25 mm thick uniform shade Kotah stone flooring over 20 mm thick (Avearge) base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing in minimum three levels to obtain mirror polish complete with base cement mortar 1:4 (using crushed sand) all as per specifications, patterns and drawings complete.

Providing and repairing to internal plaster in cement mortar 1:4 (using river sand) of thickness 12 mm to 20 mm in patches of area up to 2.5 sq metres including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls, including disposal of rubbish to the dumping ground within 50 metres lead

Providing 12 mm thick Internal plastering in cement mortar 1:4 without cement punning (using crushed sand) finished smooth, including sieving of sand to required fineness, preparation of the surface, scaffolding, curing all as per specifications, drawings and as directed at site complete

Providing Rough cast plastering 25 mm thick for exterior masonry and concrete surfaces laid in 2 operations base coat with cement mortar 1:4, (using crushed sand), 15 mm thick and finishing coat with cement and gravel/ stone chips in proportion of 1:3, 10 mm thick including double scaffolding up to 10.00 metres height wherever necessary, curing and hacking of concrete surfaces, addition of water proofing compound @ 2% by weight of cement or as per manufacturers specifications for both the coats complete as directed by the Enginner-in-charge (water proofing compound to be supplied by the contractor)

Providing and fixing 1st quality ceramic glazed floor tiles of minimum 300 - 600 mm long and 300 - 600 mm wide and thickness not less than 6 mm conforming to IS 15622 of approved make in all colours and shades as approved by Engineer-in-charge over a bed of 20 mm thick bed of cement mortar 1:4 (using crushed sand) and jointing with grey cement slurry including pointing with white cement based Tile grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Enginner-in-charge

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 of approved make. shade and colour of size ranging from 300 - 600 mm long and 300 mm - 600 mm wide and thickness not less than 6 mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints with matching colour Tile grout of approved make of matching shade including using PVC tile trim in the exposed corners, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.

Providing and fixing 1st quality approved make digital highlighter 300 x 450 mm- wall tiles as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints with matching colour Tile grout compound of approved make of matching shade complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge

Providing and fixing Glazed VITRIFIED floor tiles of approved make in different sizes conforming to IS 15622 in all colours and shades in Glossy or Matt or satin finish laid over a bed of minimum 20 mm thick bed of cement mortar 1:4 (using Crushed sand) and jointing with grey cement slurry including grouting with the joints with white cement based Tile Grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge

Using Tiles of size 600 X 600 mm

Providing and fixing plain asbestos cement sheets in false ceiling, masking, partition walls and around ducts etc. Fixing the sheets to existing frame work with suitable screws and forming necessary grooves as required including cutting the sheets to required size, making neccesary openings around electrical fixtures. A/C grills and trap door in case of false ceiling. fixing to correct lines and levels etc. complete with 6mm thick sheets.

Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately)

Anodised Aluminium sections (Minimum anodizing thickness of 15 micron)

Extra for colour anodizing

Extra over 120 mm thick cement based water proofing for providing and laying brick bat coba in roof (i) Laying brick bats with mortar using broken brick bats 25 mm to 115 mm size with 50% of cement mortar 1:4 (using crushed sand) admixed with proprietary water proofing compound as per manufacturer's specifications conforming to relevant IS and approved by Engineer-in-charge over 20 mm thick layer of C.M 1:4 (using crushed sand) to required slope complete as directed by the Engineer-in-charge. (Measurement will be over and above the average thickness of 120 mm only)

Providing and fixing FRP door shutters flush door / panelled type with plain colour or wooden veneer finish of approved make, design & colour. made out of 1.5 mm thick FRP skin moulded over wooden frame work of 40 mm wide and required thickness wooden styles and minimum 100 mm wide lock rails and wooden blocks for door stoppers, tower bolts, baby latch, aldrop, handles etc. wherever required and core filled with Polyurethane Foam and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges with S.S. wood screws

35 mm thick panelled door type of approved colours including the cost of 100 mm ISI marked heavy quality stainless steel butt hinges with necessary screws.

Providing wood work in frames of doors, windows, clear story openings and other frames, wrought framed and fixed in position of required size and shape including sawing, jointing,making rebates for shutters, making grooves as shown in the drawings, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fasts 40 mm X 3 mm thick, 200 mm long / with coach screws including protective painting to the suface that will come in contact with walls, joining materials, labour etc. complete all as per specifications and as directed by the Engineer-in-charge

Second class teak wood

Providing and fixing C.P teak wood moulded beading (Architrave) of size 50 X 12 mm using 2nd class teak wood to door and window frames with necessary screws and painting with a coat of approved primer etc. complete

Providing and fixing pannelled teak wood door shutters (35 mm thick frames and 25 mm thick shutters) using second class teak wood using styles & middle rails 100 mm x 35 mm, bottom rail 200 mm x 35 mm, top rail & lock rails 150 X 35 mm and panelling with 25 mm thick best quality teak wood planks including fixing in existing door frame including ISI marked 100 mm stainless hinges with SS screws complete all as per specifications and as directed.

Providing and painting with two coats with oil bound distemper of approved make and manufacturer over new work to give an even approved shade and including priming coat with one coat of cement primer including preparation of sufaces, filling with putty if required, scaffolding complete as per specifications and as directed by the Engineer-in-charge.

Providing, Painting on old work (one coat) with oil bound washable distemper of approved brand and manufacturer to give an even shade including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineerin- charge

Providing and applying white cement based wall putty of approved make over concrete or Plastered surface up to 3 mm thick to get uniform surface free from undulation including cleaning complete all as directed by the Engineer-in-charge

Providing and Applying one coat of primer with ready mixed pink or grey or white wood primer of approved brand and manufacture on wood work (hard and soft wood) including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Providing and painting TWO coats of synthetic enamel paint on new wooden surfaces of approved brand and manufacturer of required colour to give an even shade over an under coat of suitable shade primer of approved brand and manufacturer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Providing and fixing 19 mm thick marine plywood double shutter with composite colour lamination at top face and applying two coats of synthetic enamel paint over a coat of wooden primer on the other face for office cupboards, teakwood leaping and making rbate around the shutter, including cost of fixing S.S. hinges, CP brass tower bolts, Brass handles, magnetic lock and mortice lock etc complete as per drawing and as directed by engineer in charge.

Providing and fixing approved quality stain less steel body roller wheels of approved make for sliding shutters

Providing and Fixing 2.00 mm thick Anti-Static PVC sheet / tile in flooring and skirting of approved make in approved pattern on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer including levelling small undulations with plaster of paris if required, Copper foil strips as per manufacturers specifications, rolling with light wooden roller weighing about 5 kg all complete as directed by Engineer-in-charge in approved colour and shade

Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)

With clear float glass panes of 4.0 mm thickness

With clear float glass panes of 6.00 mm thickness

Providing and fixing 9 mm thick pre-laminated particle board flat pressed 3 layer or graded wood particle board conforming to IS 12823 Grade-I, Type - II in panelling fixed in aluminium doors, windows, shutters and partition frames with C.P brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge Prelaminated particle board with decorative lamination on both sides

Providing , Laying , jointing, fixing and testing Heavy quality (CClass) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples,reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cm hydralic pressure with a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing Teflon tape, exposed / concealed by chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint for all concealed lines / two coats of synthetic enamel paint for all exposed lines all as directed by the Engineer-in-charge. Pipes with exclusive use of TATA make C-Class pipes.

15 mm dia G.I pipe

20 mm dia G.I pipe

25 mm dia G.I pipe

32 mm dia G.I pipe

Making connection of distribution branch with G.I main of 25 to 40 mm nominal bore by providing and fixing tee including cutting and threading the pipes etc. complete as per specifications and as directed by the Engineer-in-charge

Providing, supplying, fixing in position, under floors or in walls centrifugally cast iron pipes including required specials like bends, tees, 'Y' collars, cowl etc for soil, waste and ventilation pipes conforming to IS.3989 of approved make including cost of jointing with spun yarn and molten lead of specified quantity, caulking the joints, including testing of pipes, painting with primer, fixing at walls with necessary approved type of clamps and brackets complete all as per drawings and specifications and as directed at site.

75 mm dia centrifugally cast (spun) iron socketed pipe as per IS:3989 using 0.90 kg lead / joint

100 mm dia centrifugally cast (spun) iron socketed pipe as per IS:3989 using 1.00 kg lead / joint

Providing and fixing Indian water closet (Orissa pan) of apperoved make with 100 mm China ware P or S trap, One no. 10 litre High level or low level white PVC flushing cistern with flush pipe & bend with manually controlled device (handle lever) conforming to IS:7231, PVC 15 mm Inlet connection with all fittings and fixtures complete including all connection, embedding in position commissioning, cleaning etc. all as per drawings and specifications and as directed by the Engineer-in-charge.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm

Providing and fixing white vitreous china European type Water Closet with 'P' or 'S' Trap with solid seat and lid of approved make, 10 litre low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS:7231, flush bend, fixing EWC with C.P brass screws, 15 mm PVC heavy quality inlet connection of 450 mm long, including testing , commissioning & cleaning etc. complete all as per drawings and specifications and as directed by the Engineer-in-charge

E.W.C. pan in White colour with ISI marked white solid plastic seat and lid.

Providing and fixing viterious China wash basin of approved make and colour with C.I. brackets, 15 m C.P. brass pillar tap of approved make,15 mm x 600mm long PVC Inlet connection, 32 mm heavy quality C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge

White vitreous China counter top / counter below wash basin size 560 x 410 mm / 560 x 450 mm with single 15 mm C.P. brass pillar tap (OVAL / ROUND Models)

Providing and fixing white vitreous china flat back half stall urinal size 580 x 380 x350 mm / 610 mm Aquaseal model of approved make with approved make 32mm C.P flush value with standard flush pipe and C.P. brass spreaders, 32mm urinal waste coupling with dome grating and clamp etc. including making G.I water line connection complete as directed by the Engineer-in-charge (Only G.I. pipes will be paid under relevant Item )

Single half stall urinal with C.P brass Flush valve. Note : For fixing flush valve 32 mm G.I water line provision to be made which will be paid under relevant Item .

Providing and fixing cast iron nahani trap / floor trap of 100 mm inlet and 75 mm outlet, (weighing 5.80 Kg each), jointing with lead with the connection pipes, placing as per the drawings, embedding in cement concrete 1:2: 4 and making circular hole up to floor level using 110 mm O/D PVC pipes of 6 Kg / sq.cm pressure and fixing 1 No 125 mm dia C. P brass grating , complete all as specifications and drawings and as directed by the Engineer-in-charge

Providing and fixing 15 mm C.P brass tube 600 mm long with nuts and washers complete for wash basins / urinals with all necessary acessories complete as directed by the Engineer-incharge

Providing and fixing heavy quality CP brass bottle trap 31 / 32 mm of approved make single piece moulded with height of 270mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal,of approved make for wash basins / urinal etc all as per specifications and directed by the Engineer in charge.

Providing and fixing C.P brass Angle cock of heavy quality of specified / approved make, for wash basin inlet / flush cistern etc. as per specifications and as directed by the Engineer-in-charge

Providing and Fixing 15 mm CP brass Angle stop cock of approved make- quarter Turn

Providing and fixing C.P brass 2 way Angle cock (2 Angle cock combination in single fitting) of heavy quality of approved make as per specifications and as directed by the Engineer-in-charge.

Providing and fixing heavy quality health faucet with 1.50 metres long flexible hose (hand shower) of approved make with wall brackets and type as per specifications and as directed by the Engineer-in-charge

Providing and fixing 6 mm thick mirrors of size 600 x 450 mm of approved make with bevelled edges complete with 6 mm thick asbestos sheet back ground fixed to walls with C.P. brass screws and concealed washers complete. all as per specifications and as directed by the Engineer-in-charge .

Providing and fixing stainless steel, stain finish hand drier of size 270 x 290x 100 mm, drier no touch operating,, Fully Hygienic level, rated for continuous repeat use of air velocity 90/180 KM/h and motor power 250 w , time required to dry hand pair upto wrist, Half a minute for 230 volts, 1 Phase 50/60 HZ 5 amp AC supply. In rugged multiple staved grounded steel enclosure with one bracket for firm wall fixture, one meter sheathed 3 core flexible cable, 1- three pin 5 amp plug top. having following specifications:- Weld free cover fixed to the base with two safety screws and lock with special speed flow. Aluminium base includes silent blocks to damp mechanical vibrations Fire resistance plastic UL 94-VO fan scroll. High speed motor with safety thermal cut off. The motor revolutions can be adjusted manually by the potentiometer. Aluminium centrifugal double asymmetrical fan wheel. Disconnects automatically after 60 sec of continues use.Electronic infrared detection sensor. Adjustable detection by potentiometer (5-25 cm) Ultra flat 10 cm deep Model-iTradeIMEX Poly-carbonate ABS Body Low Noise 50 dB Touch-less with Infrared Sensor 1800 Watts Power Electric Automatic Hand Dryer (White)

Providing and fixing C.P brass sensor water tab of heavy quality of specified/ approved make, for wash basin inlet, as per specification and as directed by Engineer- In- Charge.

Providing and fixing C.P brass towel rail of approved make 600 mm long complete fixed to walls with 30 mm CP brass screws with concealed fitting arrangement all as directed by the Engineer-in-charge.

Providing and fixing wall concealed SENSOR for urinal flat back large body sensor urinal manufactured by sanitary Ware with Jaquar flush valve (Jaquar Sensor Urinal SNR-CHR-51097 Sensotronic Sensor Flush, Model-Sensotronic, or Bharat Photon Automatic Urinal Sensor Flusher, Dimension 120 L mm 120 H mm, Voltage 220 V AC, Adjustable 200 - 700 mm, or Dolphy Automatic Sensor Flusher, Material Brass and SS 304, Model Number DAUF01, Sensing Range 30-50 cm. Warranty: 1 Year Warranty

Providing and fixing 15 mm C.P brass urinal spreader size with 1/2" BSP thread and shapes, weighing not less than 60 gm of approved make and type.

D V Pandharkar

M/S DATTATRAY CONSTRUCTION