SPECIAL REPAIR TO ROOF, FALSE CEILING AND TOILETS INCLUDING MISCELLANEOUS CONNECTED WORKS IN BLDG NO SL-20 (ORs LIVING), SL-21F (TOILET), RIASE-05 AND 09 (MES STORE) AT MILITARY STATION MOUNT ABU

Amount

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering

Supply & Fixing galvanised 0.63 mm thick corrugated mild steel sheeting class 8 with two corrugations side lap fixed with L-type or J-type screws in roofs covering

Fixing only CGI sheeting of any gauge with two corrugation side lap fixed with 'L' or 'J' hooks in roofs including cup washer etc complete all as directed.

Supply & Fixing 0.80 mm thick plain galvanised mild steel sheeting in eves board, ridges, hips, valley gutters, drip and straight flashings class 8 with two corrugations side lap fixed with L-type or J-type screws in roofs

Dismantling of Manglore pattern or similar tiles in roofing.

Dismantling of timber battens for tiles of any size including tilting fillets spaced exc. 15 cm etc.

Supply & Fixing Manglore pattern tiles in roofing interlocking at side joints, laid dry.

Refixing old Manglore pattern tiles in roofing interlocking at side joints, laid dry.

Supply & Fixing Clay burnt ridge or hips tiles to suit Manglore pattern roofing tiles bedded and jointed in cement mortar 1:6 etc.

Material & Labour for rolled mild steel sections in rafters, purlins and posts or hollow square pipe as in tiles battens/ purlins, nut bolts etc . where connected to common rafters and runnuing rails fixed with angle cleats or other connecting plates and nut, bolts etc. confirnimg to Fe-290 (Gde E-165).

Dismantling of timber scantling 40 sqcm and over in sections in any position in unframed works.

Material & Labour for second class hardwood (SAL) scantling clean swan in unframed work as in rafters, purlins & trusses etc all as specified and directed complete.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast con-crete articles

M/L for brick work with kiln burnt bricks built in cm (1:6) using sub class 'B' bricks of compressive strength not less than 35 Kg/Sqcm straight or curved on plan exceeding 6 mtr mean radius with old size bricks all shown on drawing and as specified.

Taking down cement plaster on brick/stone walls etc including raking out joint, hacking for key scrubbing down with water etc.

Material & Labour rendering 15 mm thick in cement mortar 1:6 on walls, surface finished even & smooth without using extra cement etc.

Material & Labour 15 mm thick rendering in CM 1:4 on external surfaces of walls & top surfaces of chajja/roof/ceiling mixed with and including liquid water proofing compound as per manufacturers' instn surface finished even and smooth without using extra cement.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets.

Suspended false ceiling system using Chicago metallic (E - grid) exposed suspended system, grid size 600mm x 600mm compressing of GI powder coated Main Runner of dimensions 39mm x 24mm x 0.8 mm thick (Thickness comprising of GI/0.4 mm+ PPPCGS/0.3 mm & weight of runner 1.35 kg for 3600 mm length), Cross Tee of dimensions 29mm x 24mm x 0.8mm thick (Thickness comprising of GI/0.4mm + PPPCGS/0.3mm & weight of Tee 0.195 kg for 600mm length) and Wall angle of dimensions 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI / 0.35mm + PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length) with and including 4mm thick HPSC (High pressure steam cured) pre primed, self embossed, textured designer board to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt-0.007 kg/clip), hold down clips (wt-0.0035 kg/clip), with provn of light fixture complete all as per manufacturer instructions and as directed.

Supply and fixing in repair of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apertaure 1.4 mm and fixed with tinned tacks, galvanised wire, screws fixed to aluminium grills or wooden frame etc complete.

Demolition of cement concrete of any description and in any position not otherwise specifically provided.

Material & Labour for 75 mm thick PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) laid in alternate bays as in pavings / plinth protection incuding finished the surface even and fair without using extra cement complete all as specified and directed.

Material & Labour for 75 mm thick PCC 1:2:4 type B-2 (using 40 mm graded stone aggregate) laid as in flooring finsihed even and smooth without using extra cement complete all as specified and directed.

Complete removal of existing surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots of walls complete all as specified and directed.

Material & Labour two coats of oil bound distemper (acrylic) white or tinted over and including 2 coat wall care putty including preparation of new or old plastered surfaces of walls etc.

Material and labour for preparation of newly/old plastered surface of wall and applying two coats of plastic emulsion incl 2 coat wall care putty complete all as specified.

Material & Labour two coat of syntetic enamel paint over new steel surface of any description over 10cm in width or grith not otherwise described over one coat red oxide primer incl preparation of surfaces complete.

Material & Labour two coat of synthetic enamel paint over new wooden surfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primer including preparation of surfaces compelte.

Material & Labour for one coat of synthetic enamel paint on old painted steel surfaces of any description over 10 cm in width or girth including preparation or surfaces complete.

Taking down shutter (mosquito proof) from the frame, any description exceeding 1.00 sqm but n.exceeding 2.00 sqm each including removing from site.

Taking down wooden frame with shutter without taking off shutter from the frame exceeding 1.5 sqm each but n-exceeding 4 sqm each including removing from site.

Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each and re-fixing in the same opening after repaired as directed.

Material & Labour IInd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned a joints complete.

Supply and fixing of 35 mm thick, factory made, gauged and skeleton shutters from 2nd class hardwood (hollock), open rebated, prepared to receive gauge, glass etc (without sash bars), edges of framing plain, chaimfered or rounded, fitted with cut & mitred beads for securing glass, guage etc, size of members of shutters as specified in SSR Part-I, members kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed.

Supply and fixing of plain framed panelled factory made shutter (any number of panels) 35 mm thick of 2nd class hard wood (hollock) (botonical name terminalia myrio carpa) for rails and styles kiln seasoned (as per IS-1141) & chemically treated as per IS- 401 and panels of 9mm thick BWP marine grade plywood bounded with high quality liquid phenol, formaldehyde, commercial both face, (the over all door shutter shell conform to IS-1003)(Part-I) and complete all as specified.

Supply and fixing of MS butt hinges, medium weight, cold rolled of size 100 mm.

Supply & Fixing aluminium alloy, anodised, sliding door bolt of length 250 mm with hasp and staple (bolt type) & fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

Supply & Fixing aluminium anodised barrel tower bolt of extruded section 200 mm long.

Supply & Fixing 150 mm size aluminium handles, cast type anodised.

Supply & fixed in repairs MS helical door spring 150 mm long fixed with screws to wooden chowkhats or fixed with welding to steel chowkhats.

Supply & fixed steel windows/ventilators box type ERW hollow 'P' section comprising double frame including gauged and glazed skelton shutter 30mm thick jointed internally with flat iron 25x3mm complete including hinges handle tower bolts, stops lugs,grill etc all as shown in drawing CEJZ/TD/20 sheet 1/3 to 3/3 and CEJZ/TD/24 sheet 1/3 to 3/3 as applicable complete Note :- For the purpose of measurement & payment double shutter with frame and grill shall be considered as one unit. (ii) Glazing,wire mesh & painting shall be measured & paid separately.

Supply & fixing in repairs stainless steel type curtain rod 22 to 25mm dia as per sample

Supply & fixing of purpose made brackets trade pattern for stainless steel decorative type curtain rods suitable for holding 22 to 25mm dia as per sample as in repair.

Supply & fixing of stainless steel decorative fincals(round type with mirror optic finish)trade pattern for decorative type curtain rods suitable for 22 to 25mm dia curtain rods as per sample as in repaie complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

Material & Labour coloured Non Skid ceramic jointless tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n. Exc. 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer with CM 1:6.

Material & Labour for coloured glazed ceramic tiles300 x 600 x 7 mm thick, on vertical surfaces such as dados and risers to steps etc., set and jointed in neat cement slurry and pointed in coloured cement to matchover 10mm thick rendering in cement mortar 1:4 , on fair faces of brick work or concrete surfaces as backing complete.

Supply & Fixing solid PVC frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet & edges will be printed to match with prelam sheet rein forced with MS square tube etc.

Supply & Fixing Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

Supply & Fixing Aluminium anodised or powder coated door, window, ventilator ,cabin partiton frame with one or more rebates and shutter sliding or casement windows as reqd . including jointing cleat, glazing clips with EDP gasket for fixing, rubber packing etc. complete all as specified and directed by Engr-in-charge.

Supply & Fixing 5.50 mm thick sheet glass, ordinary quality plain or tinted and glazing with rubber gasket in square exceeding 0.5 Sqm in each pane, complete all as specified and directed.

Hacking out old broken glass(any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads.

Supply & Fixing 3mm thick sheet glass, plain or tinted ordinary quality and glazing with oil putty in a square n exc 0.5 Sq m in each pane

Supply & Fixing 15mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors concealed or open of any length/short length including taking down or up all as specified and directed by Engr-in-charge.

Supply & Fixing 20 mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length/short length including taking down or up all as specified and directed by Engr-in-charge.

Supply & Fixing in repair gun metal gate valves, with iron wheel head, screwed both ends for iron pipe flange ends type fixed of 20mm dia and wt not less than 1.50 Kg all as spd and directed.

Supply & Fixing in repair Bib taps, 15 mm, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed by Engr-in-charge. Make: Jaquar/ESSCO or equivalent)

Supply & Fixing in repair 15mm bore angular stop cock with wall flange, cast copper alloy CP fancy type screwed down high pressure screwed for iron pipe or for union all as specified and directed by Engr-in-charge. (Make:Jaquar/ Essco or equivalent

Supply & Fixing in repair soap dish, recessed type, stainless steel, fixedcomplete all as specified and directed. (Make: Jaquar/ESSCO or equivalent)

Supply & Fixing in repair overhead shower 80mm dia Round Shape Single Flow (ABS Body Chrome Plated With Gray Face Plate) with Rubit Cleaning System (Make :Jaquar/Essco or Equivalent)

Supply & Fixing in repair CP jet spray with flexible tube etc complete all as specified & directed. Make: Jaquar Essco/Prayag)

Supply and fixing in repair angle valve two way with wall flange, 15mm dia chromium plated, cast copper alloy, complete all as specified and directed. (Make:Jaquar/ Essco or Equivalent)

Supply & Fixing in repair PVC connection 15mm size with PTMT nuts of length 450mm all as specified and directed by Engr-in-charge.

Supply & Fixing in repair 100 mm/ 125mm dia mild steel chromium plated grating fixed on floor trap / nahni trap in Cement mortar 1:6 , all as specified and directed by Engr-in-charge.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar

PVC (SWR) pipe with fittings single socketed in any length with rubber ring joints laid in tranches or in floor or fixed to walls with clamps etc. of 110mm dia complete.

Material & Labour for Concrete bed to drain pipes, 100mm, including packing under, and haunching against the sides of pipes after they are laid and tested; complete all as specified and directed.

Supply & Fixing PVC (SWR) pipes with fittings single socketed in any length with rubber ring joints laid in tranches or in floor or fixed to walls size 75 mm bore with stack clamps etc.

Supply & Fixing PVC (SWR) multi floor trap 75 mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4).

Supply & Fixing in repair vitreous china wash down water closet pan (pedestal pattern) white excluding flushing cistern & flush pipe incl connection to out going pipe and flushing pipe complete all as specified and directed.

Supply & Fixing in repair PVC low level flushing cistern complete with siphon handle lever float valve and PVC bend incl connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed by Engr-in-charge.

Supply & Fixing repair plastic water closet seat, white/ black closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device all as specified and directed by Engr-in-charge.

Supply & Fixing for health faucet (hand shower), 80 mm dia, 1.2 m long flexible tube and wall hook with N.R.V (back flow preventer) fixed complete all as specified and directed. (Make : Jaquar, or equivalent)

Supply & Fixing in repair Corner glass shelf size 200 mm radius with bracket and glass complete set etc. (Make- Prayag Droplets collection or equivalent

Supply & Fixing in repair Glass shelf size 500 X 125 mm radius with bracket and glass complete set etc. (Make- Prayag Droplets collection or equivalent

Supply & Fixing in repair brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges all as specified and directed by Engr-in-charge.

Supply & Fixing vitreous china wash basin with pedestal white flat back size 550 x 400mm, including 32 mm size cp brass waste fittings, PVC waste pipe 32 mm bore LDPE pipe but excluding taps, chain & plug and porcelain stopper but incl brackets or fixed to walls with anchor fastners all as specified and directed.

Material and labour for 300x300x20-25mm thick chequered cement concrete tiles rubberised moulded with grey cement and pigment set, jointed and pointed in neat cement slurry including laid over a screed bed of 20 mm thick in CM 1:6 complete all as specified and directed.

Taking down carefully aluminum/copper point wiring (light/fan/socket/power) complete including fittings such as switch, socket, ceiling roses light fittings etc and and making good disturbed surface of wall all as specified and directed by Engineer-in-Charge. (Serviceable light fitting to be kept separately for re-use).

Material & Labour for point wiring 1.5 Sqmm nominal area PVC insulated and unsheathed multistranded copper conductor FRLS in PVC concealed concuit with suitable metal box and hylem sheets with multistranded insulated solid copper earth continuity conductor of size 1.5 sq mm complete all as specified and directed by Engr-in-Charge :-

One light point controlled by one switch one way

One fan/exhaust fan point controlled by one switch one way

One socket out let 5 Amps 5 pin on independent board

One socket out let 5 Amps 5 Pin on same board with other switch

All as per item No 2 here in before but with cable size 2.5 Sqmm for one 5 pin 15 Amps socket out let on independent board and multistanded insulated solid copper earth continuity conductor of size 1.0 Sq mm all as specified and directed by Engr-in-Charge.

Supply & Fixing switch piano flush type 5 Amps single pole one way. Make:Cona/Anchor/Havells

Supply & Fixing socket out let 3 pin 5 Amps flush type universal. Make:Cona/Anchor/Havells

Supply & Fixing switch socket combination 2 in 1, multi pin 5 Amps flush type universal. Make:Cona/Anchor/Havells

Supply & Fixing switch socket combination 2 in 1, multi pin 5 Amps/15 Amps flush type universal.

Supply & Fixing Ceilling rose on PVC board size 65 X 50 mm three terminal Complete. Make:Cona/Anchor/Havells

Supply & Fixing Angle holder backelite complete all as specified.Make:Anchor/ Philips/Cona

Supply & Fixing fan regulator electronic step type, 230 volt , 50 Hz complete all as specified. Make:Cona/Anchor/Havells

Material & Labour for sub main wiring with 2 x 4 Sqmm copper conductor (Multistandered) 1x2.5 sqmm copper conductor wire as earth continuity in PVC counduit all as directed.

Supply & Fixing MCB DB SPN 8 way (double door) with 200 Amps rated bas bar, neutral link, earth bar and Din rail double door complete all as specified. Make Havells/ Legrand/L&T.

Supply & Fixing MCB DB SPN 12 way (double door) with 200 Amps rated bas bar, neutral link, earth bar and Din rail complete all as specified. Make Havells/ Legrand/L&T.

Supply & Fixing MCB single pole, Curve 'C' 240 volts 5 to 32 Amps complete all as specified. Make Havells/ Legrand/L&T.

Supply & Fixing MCB single pole and neutral, Curve 'C' 240 volts 32 Amps complete all as specified. Make Havells/ Legrand/L&T.

Supply & Fixing MCB triple pole and neutral, Curve 'C' 240 volts 40 to 100 Amps complete all as specified. Make Havells/ Legrand/L&T.

Supply & Fixing sheet metal enclosure with socket plug top and MCB 20amp 240v complete all as specified. Make Havells/ Legrand/L&T.

Supply & Fixing PVC flat twin core cable with aluminium conductor of size 6 sqmm complete all as specified. Make Havells/ Polycab/Kalinga or its equivalent.

Supply & Fixing LED LED light fittings 1x18 watt, 220 volt, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductore cable of suitable size from ceiling rose complete.

Supply & Fixing Exhaust fan and supply and fixing exahust fan steel body AC single phase, 230V of size 300mm sweep with blades and frame and louvers complete all as specified. Make - Havells/Bajaj/CG or its equivalents.

Hanging/refixing of ceiling Fan and connectiong up including provision of cable from ceiling rose or connector to fan.

Earthing complete with GI steel earth plate eletrode 60 cm X 60 cm X 6.3mm thick barried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 metres below level ground,connected to Gl iron or steel earth wire 4 mm dia (8 SWG) by means of nuts,bolts checks nuts and washers made of Gl iron or steel earth wire protected by Gl iron pipe 15 mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6:) type C1, pre-cast RCC coverslab 30 cm X30 cm X 10 cm with one lifting handle made of 8 mm dia ms bar funnel wire mesh,20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate larges,necessary excavation and earth work in any type of soil complete all as shownin electrical plate No 3 of MES schdule part-I and testing after completion

shree nathji trading corporation

Haritwal traders

L AND J CONSTRUCTION CO.