Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.5 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹36.0 L+₹4.7 L (15.2%)Rejected-Finance | L2 | Rejected-Finance Higher Bidder | |
| 3 | L3₹36.0 L+₹4.8 L (15.3%)Rejected-Finance 80 G T ROAD FEROZEPUR CANTT PB | L3 | Rejected-Finance Higher Bidder |
Tender Value
Refer Docs
EMD Value
₹81,000
Closing Date
13 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE FEROZEPUR
HQ CWE FEROZEPUR CANTT
SPL REPAIR OF BLDG NO T-44 AT FWC UNDER GE(WEST) FEROZEPUR CANTT
2023_MES_628555_1
CWE/FZR-28/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (WEST) FEROZEPUR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (WEST) FEROZEPUR
₹81,000
30 Jan 2024
16 Nov 2023
21 Dec 2023
16 Nov 2023
13 Dec 2023
1 Dec 2023
Amount
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed by Engineer-in-Charge.
Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and as directed by Engineer-in-Charge.
Dismantling timber scantlings 40 sq. cm and over in section, ( roof truss , purlins & girders etc.) in any position complete all as specified and as directed by Engineer-in-Charge.
Dismantling timber in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and as directed by Engineer-in-Charge.
Dismantling of Battens for tiles, shingles etc, of any size including tilting fillets exc 15 cm complete all as specified and as directed by Engineer-in-Charge.
Dismantling brick tiles or terracing tiles laid in single layer on roofs jointed and pointed in cement mortar complete all as specified and as directed by Engineer-in-Charge..
Demoletion of mud phuska in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and as directed by Engineer-in-Charge. Note :- The demolished materials/ mud pushka to be removed min 50 m away from the site
Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete all as specified and as directed by Engineer-in-Charge
Demolition of stone slabs and tiles of any description or thickness in floors, aprons,dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site complete all as specified and as directed by Engineer-in-Charge.
Demolition of brick work or stone / boulder masonary built in cement mortor including all quoins, arches, pillars etc but excluding precast concrete articles complete all as specified and as directed by Engineer-in-Charge..
Material and labour 2nd class hard wood fillets sectional area exc 13 sqcm but n. exc 25 sqcm clean sawn , secured with nails etc square , rectangular in section, complete all as specified and as directed by Engineer-in-Charge.
Material and labour for powder coated anodised aluminium snap grid frame work of size 605mm x 605 mm for fixing of false ceiling complete all as specified and as directed by Engineer-in-Charge.
Material and labour for fancy designed 6 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid (frame work for ceiling shall be measured and paid separately) complete all as specified and as directed by Engineer-in-Charge..
Material and labour for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge..
Material and labour for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge..
Material and labour for screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes like tiles etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in flooring , levelling course etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for coloured ceramic tiles 7 to 8 mm mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base 15 mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engineer-in-Charge.
Material and labour for rendering 10 mm thick on fair faces of brick work in CM (1:4) as bedding of tiles etc complete all as specified and as directed by Engineer-in-Charge..
All as per item No -18 above but as in skirting complete all as specified and as directed by Engineer-in-Charge.
Material and labour for glazed coloured ceramic tiles 300x450x7mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match complete all as specified and as directed by Engineer-in-Charge..
Material and labour for brick work with sub class "B" bricks straight or curved on plan to any radius built in CM 1:6 complete all as specified and as directed by Engineer-in-Charge.
All as per item No -23 above but except bricks ( old bricks shall be reused after proper cleaning retrived from above items) complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Half brick work with sub class "B" bricks built in CM 1:4 complete all as specified and as directed by Engineer-in-Charge.
Demolition of cement concrete in ground floor n.exc 15cm thickness (below or above ground level) and removing the demolished material and debris out side of MD land complete all as specified and as directed by Engineer-in-Charge..
Material and labour for 75 mm PCC (nominal mix) 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection, Hard standing etc and other similar works finished even and smooth without using extra cement including necessary form work complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 75 mm thick PCC 1:4:8 type D-2 (Using 40 mm graded stone aggregate ) in floor sub base etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 50 mm thick PCC 1:2:4 type B-1 (Using 20 mm graded stone aggregate ) in floor etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Plates (plain or chequered) 10 mm thickness channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of new or previously untreated steel surfaces and applying two coat of synthetic enamel over a coat of red oxide primer over 10 cm in width or girth not otherwise described complete all as specified and as directed by Engineer-in-Charge.
Taking down chowkhats n exc 1.50 sqm each (without taking off shutter from the frame) complete all as specified and as directed by Engineer-in-Charge..
Taking down chowkhats or frames exc 1.50 sqm and n.exc 4.00 sqm each (without taking off shutter from the frame) complete all as specified and as directed by Engineer-in-Charge..
Taking down of unserviceable steel windows/ Ventilators with frame (without taking down shutters and grill from frame) of size not exc 1.50 sqm each including cutting holes of appropriate size for insertion blocks of cement concrete hold fasts complete all as specified and as directed by Engineer-in-Charge..
Supply and fixing factory made box type steel window with pintle hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and as directed by Engineer-in-Charge and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07 kept in GE office.
Supply and fixing factory made box type steel window with pintle hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and as directed by Engineer-in-Charge and shown on Grawing No CEJZ/TD-06/07 & CEJZ/TD-07/07 kept in GE office.
Supply and fixing mild Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 3.00 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n. exc. 0.50 sqm in each pane complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 3.00 mm thick sheet glass, Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed by Engineer-in-Charge..
Supply and fixing stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-Charge..
Supply and fixing 125 x 60 mm size Pressed steel frames for doors with one or more rebates including fixing necessary lugs, hinges, lock strike plate, etc., complete all as specified and as directed by Engineer-in-Charge..
Supply and fixing 105 x 60 mm size Pressed steel frames for doors with one or more rebates including fixing necessary lugs, hinges, lock strike plate, etc., complete all as specified and as directed by Engineer-in-Charge..
Material and labour for providing cement concrete type C1, 1:3:6 (using 20 mm graded crushed stone aggregate) as in bed blocks for hold fast, purpose made bolts and filling in pressed steel chowkhat and all other similar works including necesssary form work complete all as specified and as directed by Engineer-in-Charge..
Supply & fix 35 mm thick 2nd hard wood rail and style plain framed panelled shutters(any panel) with lock rail and panel of 9 mm thick B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-Charge..
Material and labour for glazed and skeleton shutters 35 mm thick 2nd class hard wood open rebated and prepared to receive gauze etc divided into squares rebated sash bars any numbers, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass, sizes of memebres as specified in SSR Part-I section 8 clause 8.20 (a) (glass windows etc) complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per manufacturer's specification & drawing complete all as specified and as directed by Engineer-in-Charge..
Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top and bottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 complete all as specified and as directed by Engineer-in-Charge..
Supply and fixing mild steel butt hinges 100 mm long, medium weight , cold rolled complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing aluminium handle 150 mm long, cast type anodised complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing aluminium anodised 150 mm long barrel tower bolts of extruded section complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing for Aluminium alloy, anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Preparing new wooden surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing in repair vitreous China squatting pan, ' Orissa patteren, size 580 x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair vitreous China wash down water closet pan (pedestal pattern) white,incl. trap, connection to drain and flushing pipe including seat cover for pedstal pan complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and as directed by Engineer-in-Charge..
Supply and fixing in repair vitreous China wash basin white, flat back, size 550X400 mm including CP coupling, waste pipe and cutting for pinning in ends of brackets, complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair for Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) incl. providing and fixing plugs, securing urinal to plugs with and incl, 60 mm long brass screws, pointing around urinal back in cement mortar 1:2 complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 20 mm thick Granite (of any type) work (table rubbed and polished) in cooking platforms counter for WHBs etc and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engineer-in-Charge.
Material and labour 20 mm thick granite (of any type and colour) machine cut as in urinal partitions and all other similar works including grinding, polishing,cutting grooves in wall for fixing granite with cement mortar 1:2 and all other arrangments complete all as specified and as directed by Engineer-in-Charge.
Taking up or down steel tubing 15 mm dia and connection including cleaning for refixing complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed by Engineer-in-Charge.
Fixing only old 15 mm steel tubing and including cleaning in positon (walls, ceiling and floor etc complete all as specified and as directed by Engineer-in-Charge.
Taking up or down steel tubing 20 mm dia bore and connection including cleaning for refixing , complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing GI tubing 20mm bore medium grade with all fittings and fixed complete to wall and ceilingor laid in floors complete all as specified and as directed by Engineer-in-Charge.
Fixing only old 20 mm steel tubing and including cleaning in positon (walls, ceiling and floor etc complete all as specified and as directed by Engineer-in-Charge.
Taking up or down steel tubing 25 mm dia bore and connection including cleaning for refixing , complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing GI tubing 25mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed by Engineer-in-Charge.
Fixing only old 25 mm steel tubing and including cleaning in positon (walls, ceiling and floor etc complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing as in repair 15 mm bore fancy type chromium plated bib taps long body type 15mm bore screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair 15 mm bore fancy type chromium plated pillar taps, with capstan heads, screwed down, high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing as in repair 15 mm bore fancy type CP angle cock / stop valve cast copper alloy screwed down, high pressure, with capstain handle, screwed both ends for iron pipe or for unions complete all as specified and as directed by Engineer-in-Charge.
All as per above items No- 73 but Concealed stop cock complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repairs 15 mm bore CP brass shower rose 125 mm size with or without swivel joints including fixing to steel pipe or union complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair PVC connection 15mm size PTMT nuts of length 450 mm. complete all as specified and as directed by Engineer-in-Charge.
Material and labour in repair 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed by Engineer-in-Charge.
Material and labour for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed by Engineer-in-Charge.
Demoletion and breaking up drain pipes upto 100 mm dia (Salt glazed ware, AC, PVC or reinforced concrete) set in cement mortar complete all as specified and as directed by Engineer-in-Charge.
Demoletion and breaking up drain pipes upto 150 mm dia (Salt glazed ware,AC, PVC or reinforced concrete) set in cement mortar complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, and fixed to walls complete all as specified and as directed by Engineer-in-Charge..
110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engineer-in-Charge.
All as per Item No-83 above but 75 mm dia pipe laid in trenches or in floors complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 75mm dia PVC (SWR) bends any radius complete all as specified and as directed by Engineer-in-Charge.
All as per Item No-86 above but 110 mm dia complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 110 mm dia PVC (SWR) junction single, (single T) equal or uequal provided complete all as specified and as directed by Engineer-in-Charge..
Supply and fixing 110 mm dia PVC (SWR) vent cowl complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repairs PVC water tank 1000 ltr capacity rotational moulded polyethelene water storage tank double layered (Cylindrical verticle with closed top) hoisted and fixed in position complete all as specified and as directed by Engineer-in-Charge. and as directed
Supply and fixing in repairs for Gun metal globe or Gate valve 15 mm size with iron wheel screwed both end for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repairs for Gun metal globe or Gate valve 20 mm size with iron wheel screwed both end for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repair ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm dia complete all as specified and as directed by Engineer-in-Charge.
Excavating in trenchs, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed by Engineer-in-Charge..
Material and labour for PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in foundation filling, mass concrete complete all as specified and as directed by Engineer-in-Charge..
Supply and fixing 150 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Concrete bed to drain pipes in cement concrete 1:4:8 type D-2 including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed by Engineer-in-Charge.
Returning, filling including spreading leveling watering and well ramming in layers n. exc 25 cm in soft/loose soil complete all as specified and as directed by Engineer-in-Charge.
Removing excavated soil to a distance n. exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed by Engineer-in-Charge.
Material and labour for RCC nominal mix 1:2:4 , type B-1 (using 20 mm graded stone aggregate) as in Slabs supported on walls, lintels, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Providing precast ce-ment concrete 1:3:6 , type C-1 (using 20 mm graded stone aggregate) as in landings, cover slabs (for man holes etc.) chajjas, shelves and similar articles with plain faces including form work set in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces of concrete complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Formwork to sides and soffits of cantilevers, shelves , duck slabs etc including supports, overhangs, etc. complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.
Material and labour rendering 15 mm thick cement plaster on fair faces of brick work / concrete surfaces in CM 1:4 finished fair and even with integral water proofing compound @ 3 % by weight of cement content ( in MH area) complete all as specified and as directed by Engineer-in-Charge.. Note :- Water proofing compound to be measured & paid separately
Material and labour for providing 50 mm thick cement concrete 1:2:4 type B-0 (using 12.5 mm thick graded crushed stone aggregate ) as in coping by using IWPC @ 3 % by weight of cement contents (on MH area) complete all as specified and as directed by Engineer-in-Charge.
Supply only Integral water proofing compound complete all as specified and as directed by Engineer-in-Charge.
Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for rendering 15 mm thick cement plaster on fair faces of brick work / concrete surfaces in CM 1:4 finished fair and even complete all as specified and as directed by Engineer-in-Charge..
Material and labour for rendering 15 mm thick cement plaster on other than fair faces of brick work / concrete surfaces in CM 1:6 finished fair and even complete all as specified and as directed by Engineer-in-Charge..
Supply and fixing in repairs Stack clamps for 100 mm dia pipes , out of 50 x 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparing newly plastered/ unplastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge..
Material and labour for complete removal of existing surface and applying two coat of cement base paint on walls, etc white or tinted complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coats of wall care putty complete all as specified and as directed by Engineer-in-Charge.
Taking down carefully copper /aluminium point wiring (light, fan, socket or power) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed by Engineer-in-Charge.
Material and labour Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including new rigid non-metallic PVC conealed conduit, /surface conduit with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches/bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge for one light/fan/Bell Point controlled by one single pole one way switch
All as per item No 118 but for one 3 pin socket outlet 5 Amp on the same board controlled by one single pole one way switch complete all as specified and as directed by Engineer-in-Charge.
All as per item No 118 but for one 5 amps socket outlet independent controlled by one single pole 5 Amp switch complete all as specified and as directed by Engineer-in-Charge.
All as per item No 118 but for one three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing switch piano flush type 6 amps, one way complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Switch piano flush type 16 amps, one way complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Socket outlet 3 pin, 6 Amps, piano flush type complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Socket outlet, 2 in one 6 pin 5 and 16 Amps piano flush type complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair Ceiling rose surface type, PVC/polycarbonate ,isolated, bakelite 65 x 50mm, 3 terminals complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair sheet metal enclouser DB's 8 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 volts 200 Amps rated enameled bus bar 8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair MCB single pole neutral (SPN) 240 volts, 20 to 40 Amps, 10 KA complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing in repair MCB single pole (SP) 240 volts, 6-32 Amps, 10 KA 'B' Series complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing LED light fitting 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair LED Bldg Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing LED tube light fitting 18/20 Watts,4 feet long decorative ultra slim linear LED lighting fixture (White/Warm white) with extruded polycarbonate, environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing Lamp holder PVC/Polycarbonate,isolated with back plate suitable for batten fittings including 10W LED Bulb complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing sub main wiring of 6 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 6.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 mm dia all as specified and directed. Note:-Two run of single core 6 sqmm cable and one run single core 6.0 sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length) complete all as specified and as directed by Engineer-in-Charge.
All as per item No 136 but 4 sqmm Submain wiring
Material and labour for earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate, excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009) complete all as specified and as directed by Engineer-in-Charge.
M/S N Maini Constrution
HARBHAJAN SINGH KHARBANDA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .