Nanded Division: 1. Provision of Hot Axle and Hot Wheel Detector system (HAHD) at UMM station -Electrical Arrangements. 2. Provision of Hot Axle and Hot Wheel Detector system (HAHD) at MQL station-Electrical Arrangements.

A-Provision of Hot Axle and Hot Wheel Detector system (HAHD) at UMM

Supply and erection of modular type 3 pin 16A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. Make: Legrand/Havells /GM/INDOASIAN.

Supply and erection of modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete. Make: Legrand/Havells/GM/INDOASIAN.

Supply, erection and marking DP MCB 16-32A, 10 kA B/C-series in provided distribution board as per specification No. SW-SWR/MCB Make: Legrand /Havells/L&T

Excavation of cable trench 30 cm wide x 90cm deep in all types of soils for HT/LT UG cable as per specification No.Y/E.cable laying/6/99 annexed.

Cutting of esphated road/ concrete/ cement/under the track etc., and excavation of 5 cable trench 30cm wide x 90 cm deep road etc., for laying of HT/LT UG cable. After laying of cable the trench should be brought to its original position by providing tar/ concrete/ cement as per the site conditions and as per directions of Rly.Engineer.

Supply and laying of ISI marked 4 core 25 sq mm cross linked polyethylene (XLPE) 6 insulated LT UG cable, PVC outer sheathed, armoured with galvanized round steel wire or steel strip and with aluminium conductor suitable for rated voltage at 1100 volts grade and conforming to IS:7098(Part-1)/1988 witham dt. no. 1,2 & 3 (reaffirmed 2005) orlatest. Make: Polycab/Finecab/Finolex/Havells

Supply and running of 8 SWG GI wire is to be laid for earth continuity.

Supply and erection of earth electrode as per the enclosed specification.

Supply, erecting and laying of HDPE pipe of PE-80 grade in PN-4 outer dia of HDPE 9 pipe 63 mm (nearest 2"" dia) and wall thickness minimum 2.5 mm maximum 2.8 mm with "T' joints, bends, elbows etc.including all other connected accessories.Make: M/s.Sudhakar/ Nagarjunapolymer/Nandi/Plasto

Supplying and erecting of any size electrolyte copper patti or bar in bus bar chamber 10 / in panel or any other purpose,500 V with require capacity with 99.9 % copper purity with fixing arrangement(like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete.

Providing and fixing sheet metal work in CRCA sheet with fabrication of boxes for fixing of MCB's and Sockets etc. including cutting, bending, drilling, welding, rivetting etc. treated with anti-rust treatment and duly power coated as per the above specification.

Supply, erection, testing and commissioning of all material, excavation, and casting of cement concrete foundation/ concreting in ratio 1:3:6 with necessary curing for foundation of metal box mounting or any other purposes.

Supply, laying, connecting & commissioning of single core FRLS multi strand 6 sq. mm Cu. Conductor

Supply of cable lugs of 25 sq mm

Supply, fixing , connecting and commissioning of Master control 32A TPN MCB as per the direction of the Engineer at site

B-Provision of Hot Axle and Hot Wheel Detector system (HAHD) at MQL

Supply and erection of modular type 3 pin 16A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. Make: Legrand/Havells/GM/INDOASIAN.

Supply and erection of modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete. Make: Legrand/Havells/GM/INDOASIAN.

Supply, erection and marking DP MCB 16-32A, 10 kA B/C-series in provided distribution board as per specification No. SW-SWR/MCB Make: Legrand /Havells/L&T

Excavation of cable trench 30 cm wide x 90 cm deep in all types of soils for HT/LT UG cable as per specification No.Y/E.cable laying/6/99 annexed.

"Cutting of esphated road/ concrete/ cement/under the track etc., and excavation of 5 cable trench 30 cm wide x 90 cm deep road etc., for laying of HT/LT UG cable. After laying of cable the trench should be brought to its original position by providing tar/ concrete/ cement as per the site conditions and as per directions of Rly.Engineer.

Supply and laying of ISI marked 4 core 25 sq mm cross linked polyethylene (XLPE) 6 insulated LT UG cable, PVC outer sheathed, armoured with galvanized round steel wire or steel strip and with aluminium conductor suitable for rated voltage at 1100 volts grade and conforming to IS:7098(Part-1)/1988 with am dt. no. 1,2 & 3 (reaffirmed 2005) or latest. Make: Polycab/Finecab/Finolex/Havells.

Supply and running of 8 SWG GI wire is to be laid for earth continuity.

Supply and erection of earth electrode as per the enclosed specification

"Supply, erecting and laying of HDPE pipe of PE-80 grade in PN-4 outer dia of HDPE 9 pipe 63 mm (nearest 2"" dia) and wall thickness minimum 2.5 mm maximum 2.8 mm with "T' joints, bends, elbows etc.including all other connected accessories.Make: M/s.Sudhakar/ Nagarjunapolymer/Nandi/Plasto

Supplying and erecting of any size electrolyte copper patti or bar in bus bar 10 chamber/in panel or any other purpose,500 V with require capacity with 99.9% copper purity with fixing arrangement(like lug or bottle type lug) to both theend with high grade polyolefin insulation sleeve complete.

Providing and fixing sheet metal work in CRCA sheet with fabrication of boxes for fixing of MCB's and Sockets etc. including cutting, bending, drilling, welding, rivetting etc. treated with anti-rust treatment and duly power coated as per the above specification.

Supply, erection, testing and commissioning of all material, excavation, and casting of cement concrete foundation/ concreting in ratio 1:3:6 with necessary curing for foundation of metal box mounting or any other purposes.

Supply of cable lugs of 25 sq mm

"Supply, fixing , connecting and commissioning of Master control 32A TPN MCB as per the direction of the Engineer at site"