WBPWD/EE/JED/eNIQ4/2019-20

Amount

Supply & Delivery of 9 Mtr Steel Tubular Pole (Zindal /Bansal Utkarsh /as per EIC) as per specification Type 410 SP - 32 as overall length 9 mtr weight 154 kg. & having diamention are : Out side dia & thickness of the Bottom section (16 5. 1x4 .8 5 ) mm; Middle;(13 9. 7x4 .5 0 ) mm ,Top Section (11 4. 3x3 .6 5 ) mm with fixing the base plate and GI earth bolt after making drilled holes etc. on pole incl. jacketing arrangement if reqd. as per direction of EIC

Erection of Single Steel tubular pole of 9 mtr. length with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly as per GS

Extra for providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) suitable for alkathene/ polythene pipe entry as directed for street light wiring,Without loop box

Supplying & Fixing PVC waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MSclamps with bolts, nuts etc. including painting with anticorrosive.(MAKE-SINTEX)

S&F 50 mm. dia 1.5 mtr. long detachable type G.I.double arm bracket, (115 digree angle) suitable for pole head. The arm bracket shall be properly welded with 15 mm. thick stifner plate of pole sleeve for strengthening incl. properly fixing arrangement with the pole by bolts, nuts and washer as per direction of EIC.

Supply & fixing of 13 mm dia poly pipe in CC muffing for cable entry at the bottom of the pole as per direction of EIC

Painting of Steel Tubular Pole of 9 mtr length and no. of coats of paint, with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint Upto 9 mtr. long pole i)1st coat of synthetic paint over 1 coat of RO priming, II)2nd coat of synthetic paint over 1st coat

S& delivery of Rooftop light Century Magic /CG /Havells /Philips (as per choice of EIC) SPOR072C72W (5 Year manufactures warranty)

S& drawing from loop box to fitting by 3x1.5 sq. mm PVC insulated copper wire (Brand approved by EIC) through MPVC/3mm thick Polythene pipe.

supply and delivery of the following cable:

a. 2core 10sqmm 1.1kv grade (make-Glostar,polycab,currency)[for pole connection]

Laying of one No. cable 10 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Laying of cable upto 2 core 10 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :

a.2 core 10sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials

a.2 core 10sqmm

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts.long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level (tata/isi medium) (as per choice of EIC)

Excavation of soil for installation of Earth Electrode and filling & ramming.(morrum soil)

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages(4 SWG)

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required(for GI pipe protection)

a.25mm dia

Supplying and fixing of 240V 32A Sheet steel Main Switches on flat iron frame on wall

S & installation of single phase Timer DB comprising of 2+10 way SPNMCBDB ( Conceled in wall) , 32 A DP MCB , analog time switch ,32 A DP power contactor , 32 A Mcb change over with suitable interconnection . ( Make: L&T /Siemens / Havels) (as per choice of EIC)

Supply & Delivery 3" dia. 2 Mtr. Long heavy gauge G.I. Pipe (minipole) having M.S. sole plate welded with drilled hole at bottom of the pole to be installed on roof of building incl. providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) suitable for alkathene/ polythene pipe entry as directed for street light wiring, incl. Supply & fixing 50mm Dia 2mtr long detachable type GI Single arm bracket suitable for the pole head.The arm brfacket shall be properly welded with 15mm thick stifner plate of pole sleeve for strengthening including properly fixing arfangement with the pole by bolt , nut, wahser as per direction of EIC

Supplying & Fixing PVC waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint.(MAKE-SINTEX)

S& drawing from loop box to fitting by 3x1.5 sq. mm PVC insulated copper wire (Finolex 'FR') through MPVC/3mm thick Polythene pipe.

supply and delivery of the following cable:

a. 2core 10sqmm 1.1kv grade[for rooftop] (Gloster /Polycab /Currency) (as per choice of EIC)

Laying of cable upto 2 core 10 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :

a.2 core 10sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials

a.2 core 10sqmm

S&fixing of COMPOUND light C&G make cat no.-LSTN-90-CDL-A Century Magic /Havells /Philips

Supplying and fixing of 240V 32A Sheet steel Main Switches on flat iron frame on wall

S & installation of single phase Timer DB comprising of 2+10 way SPNMCBDB ( Conceled in wall) , 32 A DP MCB , analog time switch ,32 A DP power contactor , 32 A Mcb change over with suitable interconnection . ( Make:Siemens/ABB/ L&T)

Supply & fixing of the following items:

Phillips make, cat no.- BN108C LED 40S PSUCDL WH

S & f ac celing fan with all accessories of down rod ,canopy fork,blades etc . (without regulator) by 2*1.5 sqmmcupper wire as per GS. (make -Usha striker plus/ Crompton Greaves /Technique /Orient Quasar) (as per choice of EIC)

250v 1200 mm sweep (48")

S&F exhaust fan with louver shutter/cowl after making hole in wall & making good damages & smooth cement finish etc. As practicable as possible & providing necy. Length of PVC insulated wire & making connection for exhaust of following

a. 250V 9''dia (make EPC / orient make heavy duty) (as per choice of EIC)

Supply & Fixing Socket type fan regulator (Step type)(Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.

Supplying & Fixing LED bulk head light fitting (Philips cat no.-WT202W LED6S NW PSU S2 PC /Century Magic HWAR012C /CG.) (as per choice of EIC)

Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V 16/20 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 6A plug socket (Brand approved by EIC), without switch & plug top, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for plug by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc.

Supply & Fixing 240 V, 20 A plug socket (Brand approved by EIC), without plug top and switch, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for combined plug switch by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc

Supplying & Fixing 240 V AC/DC superior type Ding- dong Call Bell (Anchor) on HW board incl. S&F HW board

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed][Avg run 12mtr]

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish(on board)

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EIconduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Supply & delivery of the following items:

Phillips make, cat no.- BN108C LED 40S PSUCDL WH /Century Magic Prism BWPL036C 36W/CG (asper choice of EIC)

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)

S & f ac celing fan with all accessories of down rod ,canopy fork,blades etc . (without regulator) by 2*1.5 sqmmcupper wire as per GS. (make -Usha striker plus/ Crompton Greaves]

250v 1200 mm sweep (48")

Supply & Fixing Socket type fan regulator (Step type)(Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.

Supplying & Fixing LED bulk head light fitting (Philips cat no.-WT202W LED6S NW PSU S2 PC /Century Magic HWAR012C 12W /CG.) (as per choice of EIC)

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/ perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) through cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F 19mm dia 3mm thick heavy gauge polythene pipe without continuity wire by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works.

a. 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

a. 2.5sqmm

S&fixing 250 v 6 to 10 A per way , SPNMCBD with SS enclosure double door with IP - 42/43 protection with 40A DP MCB as incomer and 6 no SP MCB (C - Curve 10 ka) as outgoing concealed in wall after cutting the wall & mending good the damages to original finish incl interconnection with suitable size of cupper wire & neutral link & provision of earthing attachment.. (MAKE l&t/hagger/siemens) 2+ 6 way. (as per choice of EIC)

supply and delivery of the following cable:

a. 2core 10sqmm 1.1kv grade (Gloster /Polycab /Currency) (as per choice of EIC)

Laying of one No. cable 10 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Laying of cable 2 core 10 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :

a.2 core 10sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials

a.2 core 10sqmm

Supplying and fixing of 240V 32A Sheet steel Main Switches on flat iron frame on wall

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts.long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level (tata/isi medium) (as per choice of EIC)

Excavation of soil for installation of Earth Electrode and filling & ramming.(morrum soil)

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages(4 SWG)

Supply & Fixing 240 V, 25, plug socket with separate 25A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

S& F 25A modular plug top (indicator type)- make- Crabtree/ Anchor/ L&T /Vinay (as per choice of EIC)

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

2X84/0.3(6 sq mm)+1x56/0.3(4 sq mm ) as ECC [For PDB to SPNMCBDB]

Finishing the end of cupper PVC wire by crimping method including providing of cupper socket as per direction of EIC.

4 sq mm cupper socket

6 sq mm cupper socket

Supply and installation of Home UPS, capacity approx 1500 VA, 12 Volt make. Model: Numeric Digital HPH HR 1400/ EXIDE/APC (having 24 months warranty)

Supply and installation of 12 Volt, 150 AH battery,including necessary interconnection (Make-EXIDE INVA TUBULAR model no: lT- 5OO /equivalent Amaron) having Minimum 42 months warranty

S & F Lightning conductor Air-terminals made of 15 mm dia 1500 mm long GI pipe (ISI Medium) having five prongs of 4 SWG GI (Hot Dip) wire at top with 85 mm dia 6 mm thick GI base plate at bottom incl. necessary holes etc. duly grouted on the parapet etc. in CC mortar (4:2:1)

Supply & fixing GI (Hot Dip) strips 20 mm x 3 mm thick for horizontal run on the Parapet/Roof/ Wall with GI Saddles 1100 mm apart incl. mending good the damages to building works.

Supply & fixing of GI (Hot Dip) strips 20 mm x 3 mm thick for vertical run on wall with GI saddles spaced not exceeding 1000 mm apart incl. mending good damages to building work.

Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for LC installation, per storey of building per vertical run.

Supply & Fixing of Testing Joints by 20 mm x 3 mm thick GI (Hot Dip) strip 125 mm long grouted on wall having clearance of 6 mm from wall for making connection with thimbles at the end of 7/10 SWG GI (Hot Dip) stranded Wire and 4 SWG GI (Hot Dip) wire of vertical conductor and conductor from earth electrode complete with S & F thimbles, GI bolts, nuts, check-nuts, spring washers etc. as required.

Making soldered joints between conductors and down pipes/ other metallic objects for 4 SWG GI (Hot Dip) wire including supply of necessary 4 SWG GI (Hot Dip) wire, jointing materials and painting with 2 (two) coats of bituminous paint.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below.

By ISI-M GI pipe

Excavation of soil for installation of Earth Electrode and filling & ramming.

a) for Morrum soil @ 1.00 Cu mtr per earthing.

Extra of treatment of soil by using salt & charcoal for pipe electrode.

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.[G-2/4(b)]

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages(4 SWG)

Supply and fixing Single phase S.P.D. Type-1 with Encloser with Necy connection (Make- L&T/approved, Cat No- AUSP121PN100) on Din rail with sheet steel enclosure (Double door 4-way MCB DB Make: L&T) on wall with following details- Number of poles: 2 P Max discharge (Imax) or impulse (Iimp): 100 kA Number of modules: 2 Remote contact: no

Supply and fixing 3 phase SPD type- 1 four pole Surge Protection Device(Make- L&T/approved, Cat No- AUSP123PN100) on Din rail with sheet steel enclosure (Double door 6-way MCB DB Make: L&T) on wall with following details- Number of poles: 3 P Max discharge (Imax) or impulse (Iimp): 100 kA Number of modules: 4 Remote contact: no

supply and delivery of the following cable:

a. 2core 10sqmm 1.1kv grade (make-Glostar,polycab,currency) (as per choice of EIC)

Laying of one No. cable 10 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Laying of cable upto 2 core 10 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :

a.2 core 10sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials

a.2 core 10sqmm

Supplying & Fixing PVC waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MSclamps with bolts, nuts etc. including painting with anticorrosive.(MAKE-SINTEX)

Providing source of glow sign board by catenary system by S&L 2x1.5sq mm +1x1.5 sq mm PVC FR Cu wire through flexible polythene pipe.

Supplying and fixing of 240V 32A Sheet steel Main Switches on flat iron frame on wall

S & installation of single phase Timer DB comprising of 2+10 way SPNMCBDB ( Conceled in wall) , 32 A DP MCB , analog time switch ,32 A DP power contactor , 32 A Mcb change over with suitable interconnection . ( Make: L&T /Siemens) (as per choice of EIC)

S & F of 4ft 16w water proof LED Tube light fittings (CGcat no:IPFC111LT8/Philips) including including making entire connection with 3x1.5 sq. mm stranded copper wire through flexible PVC pipe for proper illumination of the GSB from inside as per direction of EIC

S & F of Glow Sign Board(12ft x 4 ft x 10 inch depth) made from 50X50X6 mm MS angl, 40x6mm MS flat having the provision for opening from backside by 50X50X6mm MS angle, 3 nos hinges duly welded. The board should be enclosed from out side by 20 SWG GI SHEET except the front. The entire board should be painted with one coat of synthetic enamel paint over one coat of RO primer. The front facia of the board is to be made with 2mm thk White PVC sheet of export quality having suitable size and to be fixed on the front structure by S & F suitable size aluminium angle, SS Screws. The matter is to be incripted on a whole best quality venyle sheet as per approved size, colour & matter which will be pasted properly over the PVC sheet.

B. MAHAPATRA AND CO

ELCON ENGINEERS