REPAIRS AND MAINT OF INTERNAL ELECTRIFICATION SYSTEM AND OTHER ALLIED WORKS AT AFS BEGUMPET UNDER GE (AF) HAKIMPET

Amount

Taking down copper / aluminum point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, lamp holders, light fittings etc removing materials and making good disturbed surfaces of walls, floors etc, including paint tuch up to match with the existing surface as per site requirement, complete all as specified and directed.

M&L for Point wiring complete with 1.5 sq mm single core PVC insulated FRLS cable, with multi standard copper conductors, 1100 volts grade, drawn thorough and including non metalic, med. grade rigid PVC conduit with all conduit accessories (including concealing and finising to match with the sorroundings) and including provisoin of 1.5 sq mm PVC indulated copper cable FRLS as earth continiuty conductor, fabricated steel teminal box made of MS sheet concealed in walls and cover with 3 mm thick hylum sheet for fixing switches, socket outlets, fan regulators etc, all as specified and directed Make for copper wire : Finolex, Anchor, Havells, Plaza ,L&T Make of PVC conduit- Finolex/ Supreem/ Prince/ Tiruptathi/ Sudhakar).

One light point controlled by one way switch.

One light point controlled by two way switch.

One ceiling fan/ exhaut fan point controlled by one one way switch.

One 3 pin socket outlet 5 Amps on the same board with other switches.

One 3 pin socket outlet 5 Amps on the Independent board.

One bell/ buzzer point controlled by one push button n the same board with other switches or independent.

All as per item here-in-before but with 4 Sqmm for 3 pin 15 Amps socket point controlled by one switch on independent board and 4 Sqmm copper conductor green in colour as earth continuity conductor, complete all as specified and directed.

All as per item here-in-before but with stove enamelled 20 mm dia medium grade steel conduit for one light point controlled by one flame proof switch, complete all as specified and directed.

M&L for Point wiring complete with 1.5 Sqmm single core PVC insulated FRLS cable, with multi standard copper conductors, 1100 volts grade, drawn thorough and including double locking type PVC casing and caping and its accessories of suitable size and including provisoin of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor, fabricated steel teminal box made out of 1.60 mm thick MS sheet concealed in walls and covered with 3 mm thick hylum sheet for fixing the switches /sockets/ regulators etc, all specified. Make for copper wire : Finolex, Anchor, Havells, Plaza ,L&T Make of PVC Casing Caping - Precision, Modi, Presto Plast, Supreme, Polycab, Sudhakar

One light point controlled by one way switch

One light point controlled by two way switch

One ceiling fan/ exhaut fan point controlled by one way switch.

One 3 pin socket outlet 5 Amps on the same board with other switches.

One 3 pin socket outlet 5 Amps on the Independent board.

One bell/ buzzer point controlled by one push button on the same board with other switches or independent.

All as per item here-in-before but with 4 Sqmm for 3 pin 15 Amps socket point controlled by one switch on independent board and 4 Sqmm copper conductor green in colour as earth continuity conductor, complete all as specified and directed.

S&F Switch piano flush type, single pole one way 5 Amps 240 volts, complete all as specified and directed. Make-Legrand/ Crabtree / Anchor / Havells

Supply and fix Switch Piano flush type two way 5 Amps, complete all as specified and directed. Make-Legrand/ Crabtree / Anchor / Havells

Supply and fix Switch socket combination 2 in 1, 5 Pin, 5 Amps flush type, complete all as specified and directed. Make-Legrand/ Crabtree / Anchor / Havells

Supply and fix Switch socket combination, 3 pin, 5 and 15A, 5 in 1 flush type, complete all as specified and directed. Make-Legrand/ Crabtree / Anchor / Havells

Supply and fix Switch bell push 5 Amps flush type, complete all as specified and directed. Make-Legrand/ Crabtree / Anchor / Havells

S&F Stepped type electronic fan regulator flush type, complete all as specified and directed. Make-Legrand/ Crabtree / Anchor / Havells

Supply and replacement in repairs, Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V. Make : M/S Shyam Switchgears / M/S Sudhir / M/S Baliga

Supply and replacement in repairs, fluorescent tube light fitting, flameproof type FLP-WP of T5, 2x28 W including intergral reflector made of aluminium alloy LM6.with electronic ballast, bipin holders, connector block, etc and all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor with suitable size, complete all as specified and directed. Make : M/S Shyam Switchgears / M/S Sudhir / M/S Baliga as approved by GE.

S & F CMRI Certified LED flameproof 1x16/20W LED Tube Light fixture and including LED tube 2 Nos recommended for gas/ vapour group IP 65 protection with complete fittings and accessories all as specified and directed.Make- Crompton EXTN1LT8-16/20/ Sudhir or equivalent.

M&L for Point wiring complete with 1.5 sq mm single core PVC insulated FRLS cable, with multi standard copper conductors, 1100 volts grade, drawn thorough and including non metalic, medium grade rigid PVC conduit with all conduit accessories (including concealing and finising to match with the sorroundings) and including provisoin of 1.5 Sqmm PVC indulated copper cable FRLS as earth continiuty conductor, fabricated steel teminal box made of 1.00 mm thick MS sheet suitable for Modular switches concealed in walls with front cover & base frame, screws, suitable for housing modular switches, socket outlets, fan regulators etc, all as specified and as directed for the following:- Make:- For copper wire 1100V:- Finolex, Havells, L&T, Anchor and PVC Conduit :- Trupti, Supreme, Prince, Finolex, Dutron.

One light point controlled by one way switch

One ceiling fan/ exhaut fan point controlled by one way switch.

One 3 pin socket outlet 5 Amps on the same board with other switches.

One 3 pin socket outlet 5 Amps on the Independent board.

One bell/ buzzer point controlled by one push button on the same board with other switches or independent.

All as per item here-in-before but with 4.0 Sqmm for 3 pin 15 Amps socket point controlled by one switch on independent board and 4 Sqmm copper conductor green in colour as earth continuity conductor, complete all as specified and directed. Note : Modular switch board steel box and frame plate with matching cover of any module shall be issued under Schedule' B' as free for fixing only.

Supply and fix Modular switch 6A, 1 way, complete all as specified and directed.

Supply and fix Modular switch 16A, 1 way, complete all as specified and directed.

Supply and fix Socket outlet, 5 pin, 6A modular, complete all as specified and directed.

Fixing only in repairs, Socket outlet, 6/16A modular, complete all as directed.

Fixing only in repairs, switch bell push modular, complete all as directed.

Fixing only in repairs, Fan regulator, 2 modular, complete all as directed.

Supply and in repairs, buzzer, AC 230 volts, single pole, complete all as specified and directed.

Supply and in repairs, bell Ding Dong AC, 230 Volts, SP, complete all as specified and directed.

M&L for sub main wiring with 3x2.5 Sqmm, (Ph+E+N) , FRLS PVC insulated, unsheathed, multi stranded,1100 volts grade copper conductor cable , single core, drawn through and including rigid PVC conduit of suitable size with all conduit accessories (including concealing in any type of wall and finishing to match with the sorroundings) including taking down unserviceable sub main wiring of any description and complete all as specified and directed. Note: Three runs (P+N+E) of 2.5 Sqmm copper cable and one run of 20 mm dia, rigid PVC conduit with all conduit accessories shall be measured as one unit length.

Description all as per item here-in-before but with 3x4.0 Sqmm, complete all as specified and directed. Note: Three runs (P+N+E) of 4.0 Sqmm copper cable and one run of 20 mm dia, rigid PVC conduit with all conduit accessories shall be measured as one unit length.

Description all as per item here-in-before but with 3x6.0 Sqmm, complete all as specified and directed. Note: Three runs (P+N+E) of 6.0 Sq mm copper cable and one run of 25 mm dia, non metallic, med. gr. rigid PVC conduit with all conduit accessories shall be measured as one unit length.

Description all as per item here-in-before but with 4x6.0 Sqmm (3Ph+1N) + 2x6.0 Sqmm (Earth), complete all as specified and directed. Note: Six runs of 6.0 Sqmm copper cable and one run of 25 mm dia, rigid PVC conduit with all conduit accessories shall be measured as one unit length.

M&L for sub main wiring with 3 runs of 4.0 Sqmm, FRLS PVC insulated, unsheathed, multi-stranded, 1100 Volts grade copper conductor calbe, single core, drawn through and including double locked type PVC casing & Capping and its all accessories of suitable size on wall/ roof surfaces, including taking down unserviceable sub main wiring of any description and complete all as specified and directed. Note: Three runs 4.0 Sqmm copper cable and one run of suitable width of PVC casing and caping shall be measured as one unit length.

Desrciption all as per item here-in-before but with 3x6.0 Sqmm, complete all as specified and directed. Note: Three runs 6.0 Sqmm copper cable and one run of suitable width of PVC casing and caping shall be measured as one unit length.

Supply and fix in repairs including taking down the following unserviceable Items:-

(a) Lamp holder PVC/ Polycarbonate type with back plate suitable for batten/ angular type.

(b) Ceiling rose PVC/ Polycorbonate insulated body with three terminals.

(c) Switch Piano, Flush type single pole, one way 5 Amps

(d) Switch Pian flush type two way 5 Amps

(e) Switch Socket Combination 2 in 1, 5 Amps flush type

(f) Switch Socket combination 3 Pin, 5 and 15 Amps 5 in 1 flush type

(g) Switch Bell push 5 Amps flush type

(h) Stepped type electronic fan regulator flush type

(j) Modular Switch 6A 1 Way

(k) Modular Switch 16 A 1 Way

(l) Socket outlet 6 A Modular

(m) Socket outlet 16 A modular

(n) Switch Bell push modular

(o) Fan Step regulator modular

(p) Bell Ding Dong AC 230 Volts

(r) Lamp Pin type 9 Watt

(s) Surface mounting PVC/Poly carbonate Box suitable for fixing 5 Amps switch Socket over existing wall

(t) Surface mounting PVC/Poly carbonate Box suitable for fixing 15 Amps switch Socket over existing wall

(u) Plug top polycarbonate 3 Pin 5 Amps

(v) Plug top Polycarbonate 3 Pin 15 Amps

Suppy and fix in repairs, wall mounted 10 W LED 6500K light fitting, 2' with extruded Al, heat sink, integral driver, energy efficient, ready to use pack etc., complete with all accessories internally pre-wired and fixing the same on and including two Nos. PVC blocks and connecting up with twin core twisted flexile copper conductor cable of suitable size upto ceiling rose including taking down old one. Make: Havells/Philips/CG

Suppy and fix in repairs, wall mounted 20W LED 6500K, light fitting, 4' batten type, with extruded Al, heat sink, integral driver, energy efficient, ready to use pack etc., complete with all accessories internally pre-wired and fixing the same on and including two Nos. PVC blocks and connecting up with twin core twisted flexile copper conductor cable of suitable size upto ceiling rose including taking down old one. Make: Havells/ Philips/CG

M&L for Taking down ceiling fan of any description, sealing cable ends, dismantling blades, cleaning all dust, applying grease, filling cavaties with fillet, including reassembling blades and hanging ceiling fan after getting repaired and connecting up including provision of cable from ceiling rose to connector of fan, complete all as specified and directed.

All as per item here-in-before but exhaust fans of any sweep.

All as per Item here-in -before but for wall mounted and pedestal fan

Supply and fix gun metal bush suitable for existing wall mounted/ pedestal/ exhasut fans, complete all as specified and directed as in repairs..

Supply and fix in repair capacitor 2.5 MFD suitable for ceiling fan / exhaust fan, complete all as specified and directed as in repairs.

All as per item above but of 4 MFD suitable for ceiling fan / exhaust fan, complete all as specified and directed.

Dismantle the unserviceable shackle assembly comprising GI bolts, nuts, rubber bush and split pin, complete all as specified and directed.

M&L for removing the defective fan winding and rewinding with super enamelled copper wire of existing gauge, applying insulation varnish, pre heating and binding with empire tubes, crimple sheet etc. as required for rewinding, complete all as specified and directed for the following:-

Ceiling fan of size upto 1400 mm sweep.

Wall mounted/ Pedestal fan of size upto 450 mm sweep.

Exhaust fan of size 350 to 450mm Sweep.

Exhaust fan of size upto 300 mm Sweep.

Supply and fix new louvers suitable for exhaust fans of size upto 450 mm sweep, complete all as specified and directed as in repairs.

Taking down the electric Geyser of capacity 25 ltrs/ 50 ltrs carefully from its installed position by disconnecting inlet and outlet water pipes, electrical connections,taking out the inner leaking copper tank, brazing the leaking portion of copper tank, testing for leaks, re-assembling the geyser including provision of additional glasswool as required, refixing in position, testing, dismantling the unit, painting with one coat of synthetic enamel paint and refixing in its original position and reconnecting the inlet/ outlet water pipes and testing on completion, complete all as specified and directed.

Supply and fixing of following items in repairs, suitable for single phase, 230 Volts, 50 Hz for existing type electric Geyser of capacity 25/50 Litres incl taking down the old one :-

(a) Heating element 1500/2000 watts push/ thread type porcelain / Circular / triangular type as required at site.

(b) Thermostat as per the existing type.

(c) Indication lamp red/ green.

(d) Fusible plug

Supply and fix new PVC connection 15mm dia 450mm long with brass nuts, and rubber washers on both sides suitable for cold/ hot water, complete all as specified and directed as in repairs.

Supply and fix new PVC connection 15mm dia 600mm long with brass nuts, and rubber washers on both sides suitable for cold/ hot water, complete all as specified and directed as in repairs.

Supply and fixing Vertical distribution board for incoming MCCB upto 250 A and MCBs for outgoing to be used, VTPN 8 Way, 415 Volts having earth bar & neutral link double door including taking down old unserviceable DB complete all as specified and directed. Note. MCCB and MCB will be measured and paid seperately under relevant items. Make: Havells, HPL, Indo Asian, Standard, Legrand

Supply and fixing Vertical distribution board for incoming MCCB upto 250 A and MCBs for outgoing to be used, VTPN 4 Way, 415 Volts having earth bar & neutral link double door including taking down old UNSV DB complete all as specified and directed. Note. MCCB and MCB will be measured and paid seperately under relevant items. Make : Havells, HPL, Indo Asian, Standard, Legrand

Supply and fix in repair, flush to wall, MCB distribution board, double door type, SPN 12 way, sheet steel powder painted, with bus bar, neutral link & earth bar etc, including taking down existing DB complete all as specified and directed.

Supply and fix in repair, flush to wall, MCB distribution board, double door type, SPN 8 way, sheet steel powder painted, with bus bar, neutral link & earth bar etc, including taking down existing DB complete all as specified and directed.

Supply and fix in repair, flush to wall, MCB distribution board, double door type, SPN 4 way, sheet steel powder painted, with bus bar, neutral link & earth bar etc, including taking down existing DB complete all as specified and directed.

Supply and fix Single Pole & Neutral Metal clad enclosure with a two pin and earth plug and socket including one single pole MCB of 20 Amps in repair complete all as specified and as directed by Engineer-in-Charge

Supply & fix in repairs, MCCB 3 pole, 415V, Adjustable /fixed type, follwing size suitable for load line DBs with terminating cables by using lugs as required, complete all as specified and directed.

MCCB 3 Pole , 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA

MCCB TP 125A, 16KA. fixed type

MCCB 3 Pole 25A to 100A, 16KA. fixed type

Supply and Fix in repairs, MCB FP/ TPN, DP/ SPN, SP ''C'' curve, 415V, including provision of copper lugs for cable termination, terminating cables by using lugs as required, complete all as specified and directed.

MCB TPN/FP 16 to 32 Amp

MCB TP 25 To 63 AMP

MCB SPN 32 AMP

MCB SPN 40 to 63 AMP

MCB SP 5 To 32 AMP

MCB FP 40 to 100 AMP

Supply and fixing 1100 volts grade, heavy duty cable, PVC insulated, stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, one twin core cable of size 4.0 Sqmm including taking down old u/s cable complete all as specified and directed.

Supply and fixing 1100 volts gr. heavy duty cable, PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, one twin core cable of size 6.0 Sqmm including taking down old u/s cable complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion. NOTE: GI Pipe for protection of earthing strip and earth strip beyond 7.5m or test point shall be measured and paid seperately under relevant items.

M&L earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to wall or any other indicated situation for loop earthing etc. as required 4.0mm dia galvanised iron or steel wire, complete all as specified and directed.

S&F multi-sensor (smoke & heat) and analog addressable type multi-sensor (smoke & heat) detector with dual optic's technology to distinguish and differenciate between real fire, steam and dust to avoid any false alarm & built-in isolator with multiple algorithms setting with base powder, including other accessories as required including taking down old u/s sensor complete all as specified and directed. Make: EST-3/Notifire/ Honey well.

Servicing the Analog / Addressable type multi sensor fire alarm system by removing the faulty detectors, cleaning all the detector, ensuring the power supply and battery back up to the panel, minor repair to the power cord and cable, clearing all the faults, detected by the system and bring it to normal mode complete all as specified and directed by Engineer in Charge. Note. Replacement of detectors and battery will be measured and paid separately.

Supply and fixing new Battery of 12 Volt DC lead acid battery 8 AH complete in fire alarm control panel including taking down old UNSV battery complete all as specified and directed by Engineer in charge

Supply and replacement of retrofit LED tube light, cool white, 18/20 watt, suitable for T8/T12 frame, 2000 lumens, including modification of wiring to suit LED tube and taking down old one, complete all as specified and directed. Make: Havells/ Philips/Crompton

Supply and fix, surface mounted, LED light fitting 40 Watt , Environmental friendly, new generation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling including taking down the old unserviceable light fittings of any type, complete all as specified and directed. Make: Crompton Model No LCTLRNE-40-CDL (1X4) or equivalent in Havells /Philips

Supply and fix, new ultra modern architectural 2'x2', recess mounted, 40W LED light fittingwhich provides soft-light and glare free symmetrical illumination suitable for Armstrong/Grid ceiling. including modification of the false ceiling as required including taking down the old unserviceable light fitting of any type, complete all as specified and directed. Make : Havells/ Philips/Crompton

Supply and fix, Square/round recess mounted 15 W LED light fitting, with high quality aluminium die cast body, high efficient constant current LED driver, including modification of the false ceiling as required at site including taking down the old unserviceable light fitting of any type, complete all as specified and directed. Make: Havells/ Philips/Crompton

Supply and replacing of tamper proof AC Three Phase Static Energy meter of Accuracy Class 1.0, 3 x 240V, 50Hz, with Backlit LCD Display, of rating 10-60A (Measures & Displays kWh, V,I, kW, PF, Hz, Last month history of kWh & MD in kW) with special features like TOD,Tamper logging, Optical Communication Port , including taking down the old meter. Make: HPL, Secure, L&T , AE.

Supply and replacing of TP, 3 Phase 415V, 50Hz, CT operated, digital Multi-function Energy meters of accuracy class 0.5 with backlit LCD display. Measures and displays trivector energy, load survey, TOD, Tamper detection & logging, power on / off events, instantaneous parameters of rating -/5A with transperant hinged type box, including taking down the old, complete all as specified and directed. Make: L&T 'OR' equivalent in Secure, HPL, AE.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including taking down of unserviceable building security lights of any type, complete all as specified and directed. Make:Havells/Phillips/CG/Bajaj.

DWARKA PERSHAD RADHEY RAMANLAL