Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.5 LAccepted-AOC GALI NO 5 6 H NO 6 275 JHARODA MAARA EXTN PART III BURARI NEW DELHI 110084 | NEW DELHI | CENTRAL DELHI | DELHI | 110084 | L1 | Accepted-AOC AOC | |
| 2 | L2₹44.8 L+₹5.5 L (14.0%)Rejected-Finance 93 SARASWATI PURAM COLONY SG PGI LUCKNOW UP 226 014 | LUCKNOW | LUCKNOW | UP | 226014 | L2 | Rejected-Finance Not L1 | |
| 3 | L3₹46.7 L+₹7.3 L (18.6%)Rejected-Finance T C L COLONY SAROJINI NAGAR LUCKNOW UTTAR PRADESH PIN 226008 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226008 | L3 | Rejected-Finance Not L1 |
Tender Value
₹60 L
EMD Value
₹1.2 L
Closing Date
27 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE LUCKNOW
HQ CWE Lucknow, 229 MG Road, Lucknow Cantt, Lucknow-226002
REPAIR/MAINT OF PERIODICAL SERVICES AT CERTAIN OFFR MD ACCN AND OTM ACCN IN ZONE G AREA OF AGE B/R-II UNDER GE (EAST) LUCKNOW
2023_MES_634182_1
CWE/LKO/E/T-101 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
Lucknow
REPAIR/MAINT OF PERIODICAL SERVICES AT CERTAIN OFFR MD ACCN AND OTM ACCN IN ZONE G AREA OF AGE B/R-II UNDER GE (EAST) LUCKNOW
8 documents required · 8 mandatory
₹1,000
GE East Lucknow
₹1.2 L
Yes
5 Mar 2024
23 Dec 2023
3 Feb 2024
23 Dec 2023
27 Jan 2024
13 Jan 2024
23 Dec 2023 - 13 Jan 2024
Amount
Demolition of PCC as in ground floors & pavings not exc. 15 cm thickness (below or above G.L.) complete, all as specified and directed.
M&L for 40mm thick PCC 1:2:4, type B-1 using 20mm graded crushed stone aggregae as in floors, finished even and smooth using extra cement, complete, all as specified & directed.
M&L for 25mm thick PCC 1:2:4, type B-2 using 12.5mm graded crushed stone aggregae as in floors or roof paddings etc, complete, all as specified & directed.
M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete, all as specified and directed.
M & L for cleaning of all loose dirt and dust from roof surfaces and applying roof treatment as under :- (a) 10 mm thick plastering in CM (1:4) using 100 % coarse sand on roof / parapet walls with WPC @ 2 % by weight of cement. (b) Applying a coat of bitumenous primer @ 0.50 Kgs/Sqm on prepared surfaces and allow to dry. (c ) Applying a coat of hot blown bitumen 85/25 grade @ 1.20 Kgs/Sqm over primer. (d) Suply and laying of 3mm thick (Minimum) polymeric water proofing membrane weighing not less than 3 Kgs/Sqm. (e) Applying a tack coat of hot blown bitumen grade 85/25 @ 1.20 Kgs/Sqm. (f) Blinding with dry coarse sand @ 0.50 to 1.0 Kg /Sqm dusted over bitumen. Note : The net area of water proofing treatment shall be measured without any extra allowance for laps & portion inserted in groove which shall be deemed included in the quoted rates.
M&L plain cement concrete cast in situ 1:3:6 type C1 using 20 mm graded stone aggregate as in copings, hold fast, back filling of pressed steel frame and other similar works including weathering and throating etc including form work complete all as spcefied and directed
Demolition of brick work built in cement mortar including all of quoins, arches, pillers etc.but excluding ashlar facings and precast concrete articles complete, all as specified and directed.
M & L for brick work using fly ash brick conforming to IS-12894:2002, Non Modular, class designation 7.5, straight or curved on plan, exc 6.0 m mean radius, built in CM (1:6) , complete, all as specified and directed.
M & L for brick work with fly ash bricks conforming to IS-12894:2002, Non Modular, class designation 7.5, straight or curved on plan to any radius in half brick thick walls in CM 1:4, bedded, jointed and flush pointed in same mortar, complete, all as specified and directed.
Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including taking dowl tiles wherever required including raking out joints hacking for key scrubbing down with water etc all as directed.
M&L for rendering 15mm thick in cement mortar 1:6 on surfaces other than fair face of brick work of walls, finished even & smooth without using extra cement complete all as specified.
M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, mixed with water proofing compound (ISI marked) @ 3% by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified. Note : - water proofing compound shall be measured and paid for separately.
M&L for rendering 5 mm thick in CM 1:3 on fair faces of concrete surface of ceiling and finishing the surface even and smooth without using extra cement, complete, all as specified and directed.
Supply only Liquid water proofing compound of approved make complete, all as specified and directed.
M&L for complete removal of exisiting finish (with mechanical sander machine) on walls and applying plaster of paris putty of min 1 mm thickness to prepare the surface even and smooth and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as speciifed. Note:- Paint to be applied with airless spray machine .
M&L for preparation of new or previously undercoated surface of wall and applying three coats of white wash on wall, complete, all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer over a coat of min 1mm thick putty complete, all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over one coat of primer, complete, all as specified & directed.
M&L for Preparation of new or previously undercoated surface of wall and applying three coats of white wash in ceiling, complete, all as specified and directed.
Complete removal of existing treatment from wall and applying one coat of wall care putty min 1mm thick to make surface even and smooth, all as specified and directed.
M&L for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces or putty surafaces and applying two coat of oil emulsion distemper (OBD) of approved shade/tint all as specified & as directed.
M&L for preparation of old surfaces (Plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash complete all as specified & as directed.
All as per item No. 22 above but applying two coat white wash on wall surfaces.
All as per item No. 22 above but applying one coat white wash on ceiling surfaces.
M & L for writing letter or figured (Block, Roman, Italic or Indian) over base coat n exc 30 cm height with synthetic enamel paint complete all as specified and directed.
M&L for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil emulsion distemper (OBD) of approved shade/tint all as specified & as directed.
M&L for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying two coat of oil emulsion distemper (OBD) of approved shade/tint all as specified & as directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but not exc 4 sqm each, complete, all as specified & directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each, complete, all as specified & directed.
Taking down shutters of any description n.exc 1.0 sqm each all as specified and directed.
Taking down shutters of any description exc 1.0 sqm but not exc 2.0 sqm each all as specified and directed.
Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws complete, all as specified and directed.
S&F 2nd class hard wood (sal) plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete, all as specified and directed.
S&F pressed steel frame for door with one or more rebates size 125x60mm including necessary fixing lugs, lock striking plates, hinges, hold fast etc. incl filling with concrete type B0 1:2:4 (12.5 mm graded aggregate) complete all as spcefied and directed.
S&F pressed steel frame for door with one or more rebates size 105x60mm including necessary fixing lugs, lock striking plates, hinges, hold fast, etc. incl filling with concrete type B0 1:2:4 (12.5 mm graded aggregate) complete all as spcefied and directed.
S&F 32mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete, all as specified and directed.
S&F 35 mm thick of second class hardwood, Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkat
Supply and fixing factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed.
S&F for factory made Solid PVC Door Frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S & F of factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; pannelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed together with solvent cement complete all as specified and directed.
S & F for steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed and welded, complete all as specified and directed.
S & F for steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay complete without glazing bars, dovetailed and welded, complete all as specified and directed.
S & F for steel ventilator with top hung shutter including box type hinges, peg stay and glazing bars complete with dove tailed or welded, complete all as specified & directed.
S&F 300 mm long, Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed
S&F in repair 300 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete, all as specified and directed.
S&F in repair 300 mm long, Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed
S&F 200mm long aluminium anodised barrel tower bolts of extruded section, complete, all as specified and directed.
S&F in repair 200mm long aluminium anodised barrel tower bolts of extruded section, complete, all as specified and directed.
S&F 150 mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete, all as specified and directed.
S&F in repaire 150 mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete, all as specified and directed.
S&F 100 mm long, fancy type, stainless steel handles, complete all as specified and directed.
S&F in repairs MS handles 150 mm for steel windows, left/right, and fixed by welding or screws as required complete all as specified and as directed.
S&F butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete, all as specified and directed.
S&F in repair butt hinges of size 100mm medium weight, cold rolled mild steel ISI marked complete, all as specified and directed.
S&F mild steel holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Grade E-165 (Fe 290) including necessary welding etc. complete, all as specified and directed.
S&F mild steel helical door spring 250mm ordinary rat tail rod pattern spring including roller and roller plate incl fixing by welding or any other means as required complete all as specified and directed.
S&F in repairs mild steel helical door spring 250mm ordinary rat tail rod pattern spring including roller and roller plate incl fixing by welding or any other means as required complete all as specified and directed.
S&F in repairs motice locks of brass, 4 lever, 100 mm size, vertical type complete all as specified and as directed.
S&F Hasp and staple, 100 mm stainless steel, fancy type, including bolt to hinge plate and fixed with screws
S&F in repairs 100 mm size Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor
S&F in repairs 40 mm wide and 8-10 mm thick rubber beading for doors complete.
S&F in repair 18/19 mm thick prilaminated partical boad, exterior grade, laminated on both side with decorative choice lamination, complete, all as specified and directed.
M&L for in repair block board, 19/20 mm thick, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame work complete, all as specified and directed.
M&L for 0.90mm thick decorative laminates 'Mica type 1 of surface finished,colour and pattern as approved, fixed with adhesive as per makers instructions complete, all as specified and directed.
M&L 2nd class hard wood, wooden beading, plain fillets, square or rectangular or tringular in section clean sawn sectional area exc 3 sqcm but not exc 6 Sqcm fixed with nail complete, all as specified and directed.
M&L 2nd class hard wood, plain fillets, square or rectangular or tringular in section clean sawn sectional area not exc 3 sqcm fixed with nail, complete, all as specified and directed.
S&F continuous piano hinges, mild steel bright finished or electro galvanized with width of flap 30mm when open complete, all as specified and directed.
S&F in repairs continuous piano hinges, mild steel bright finished or electro galvanized with width of flap 30mm when open complete, all as specified and directed.
S&F magnet catcher for cup board shutter complete, all as specified and directed.
M&L for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete, all as specified & directed.
M&L for preparation of newly steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer on surfaces of any description over 10 cm width or girth, not oterwise described, complete all as specified and directed.
M&L for preparation of old painted surface of wood based materials of any discription over 10cm in width or girth and applying one coat of synthetic enamel paint complete, all as specified and directed.
M&L for Preparation of old painted surface of wood based materials of any discription over 10cm in width or girth and applying two coat of synthetic enamel paint complete, all as specified and directed.
M&L for preparation of old painted surface of steel or iron work of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete, all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from iron frames glazed with putty or wooden beads, complete, all as specified & directed.
S&F 3mm thick sheet glass ordinary quality & glazing with oil putty or wooden beads in square area not exc 0.5 Sqm in each pane, incl hacking out old broken glass, complete, all as specified and directed.
S&F 3mm thick sheet glass froasted or obscured one side and glazing with oil putty or wooden beads in square area not exc 0.5 Sqm in each pane complete, all as specified and directed.
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete, all as specified and directed.
S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixing with stainless steel wire staples including taking down MS frame and refixing MS frame with new wire mesh with tinned tack/by welding in steel window and ventilators and making good the disturbed portion during execution of work, complete, all as specified and directed.
S & F 0.56 mm Plain Aluminium sheeting alloy 31000H4 in straight flashing of WC/bath door complete, all as specified and directed.
S&F in repair mild steel, drapery rods, coloured, standrad quality, PVC coated not less than 25mm dia with heads/finial at both ends, clamps etc. all as specified and direced.
S&F in repair stainless steel, fancy type, drapery rods, standrad quality not less than 25mm dia with heads/finial at both ends and clamps etc. all as specified and direced.
S & F auto concealed hinges, hydraulic type SS size103mmx64mmx28mm suitable for cabinet and wardrobe complete as all as specified and direced
S&F rolled steel section as in main and cross beams, hip and jack rafters, purlin where connected to common rafters and similar works conforming to grade Fe 410-w (Gde-E-250 quality A) including dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
S&F 2mm thick fibre glass reinforced translucent corrugated sheet as in roofing with two corrugated side lap fixed with ‘L’ type or ‘J’ type hooks or cranked bolts including dismantling of existing AC sheet (Corrugated, Semi corrugated etc) as in roofs etc including ridges complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating base corrugated steel sheets 0.50mm thick of any approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, including dismantling of existing AC sheet (Corrugated, Semi corrugated etc) as in roofs etc including ridges complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete, all as specified and directed.
M&L for Non skid coloured ceramic edge cut digital tiles 7 to 8 mm thick (square/ rectanglar) area of each tiles exc 0.11 Sqm but not exc 0.18 Sqm as in floor over and including screed bed 15mm thick in CM 1:6 or beding layer for laying floor finishes etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete, all as specified and directed.
M&L for coloured glazed ceramic edge cut digital tiles 600x300 x 7 mm thick but as on vertical surfaces such as skirting/dado over and including 10mm thick rendering in CM 1:3 complete, all as specified and directed.
M&L for digital vitrified ceramic tiles 10mm thick (square/rectangular), joint free, polished, coloured (dark shade as approved), area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:4 complete all as specified and directed.
All as per description of serial item No 90 above but on vertical surface over & including 10mm thick screed bed in cement & sand mortar 1:3
S&F GI tubing 15mm bore medium grade with all fittings fixed to wall, ceiling or laid in floor including taking up or down of existing steel tubing and connections complete all as specified and directed.
S&F GI tubing 20mm bore medium grade with all fittings fixed to wall, ceiling or laid in floor including taking up or down of existing steel tubing and connections complete all as specified and directed.
Cutting chases, pinning in brick walls for concealed water tubing making good to facings where required and pointing in CM 1:3 cutting not exceeding 10 cm girth complete, all as specified and directed.
Cleaning and removing all scale and dirt etc from tank and mouth of circulating pipe and refixing of capacity exc 250 n exc 500 ltrs complete, all as specified and directed.
Cleaning and removing all scale and dirt etc from tank and mouth of circulating pipe and refixing of capacity exc 500 n exc 1000 ltrs complete, all as specified and directed.
Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered white in colour (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc including dismantling of any type of existing water tanks of capacity exc 250 Ltr & n.exc 500 Ltr and removing from site complete, all as specified & directed.
Supply and fixing 1000 Litre capacity Rotational moulded polyethylene water storage tanks double layered white in colour (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc including dismantling of any type of existing water tanks of capacity exc 250 Ltr & n.exc 500 Ltr and removing from site complete, all as specified & directed.
S&F 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete, all as specified & directed.
S&F in repair 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete, all as specified & directed.
S&F gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm bore complete, all as specified and directed.
S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic WC seat cover (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device, complete, all as specified and directed.
S&F in repair vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete, all as specified and directed.
S & F in repairs vitreous china pedestal pan EWC (Couple Closet Bowl) of size 370 x 640 x 760 mm including UF seat cover, hinges, S trap-220 mm, accessories set etc and vitreous china ware flushing cistern of complete al as specified and directed, Make :Jaquar, cera or equivalent
S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, and incl 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete, all as specified and directed.
S&F in repair plastic water closet seat cover black/white, closed pattern with flat bottmom & cover and aluminum anodised hinging device complete, all as specified and directed.
S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete, all as specified and directed.
S&F in repair toilet paper holder, brass chromium plated fixed to walls with chromium plated (CP) brass screws complete, all as specified and directed.
S&F in repair CP soap dish, superior quality, fixed to plugs with chromium plated (CP) brass screws complete, all as specified and directed.
S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed on wall with PVC rawl plug & cadmium plated brass screws, complete all as specified & directed.
S&F in repair long body 15 mm bore bib tap,cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.
S&F in repair CP angle valve for 15 mm bore pipe with capstan head long screwed shank including cp cover plate fancy type complete, all as specified and directed.
S&F in repairs 15mm bore fancy type pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes complete, all as specified and directed.
S&F in repairs tubular towel rail, aluminium anodized, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete, all as specified and directed.
S&F in repair Towel ring brass chromium plated with flange fixed on wall with PVC rawl plug & cadmium plated brass screws complete, all as specified and directed.
S&F PVC connection of 15mm bore, 600mm long with brass coupling on both ends of superior quality complete, all as specified and directed.
S&F in repair PVC bath cabinet with 4mm thick looking mirror of overall size 560x410mm, complete, all as specified and directed.
S&F in repair shower health faucet to EWC ,CP brass with minimum 1500mm long CP flexible pipe, connection etc., complete, all as specified and directed.
S&F in repair peg set of 6 brass fancy type, all as specified & directed.
S&F 15 to 18mm thick granite stone slab (any shade) including grinding moulding and polishing as in floor/plate form fixed over and including 15mm thick screed in CM 1:4, complete, all as specified and directed.
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete, all as specified and directed.
S&F in repair sinks without drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete, all as specified and directed.
S&F 32mm dia PVC waste pipe approx 450mm long for sink/WHB, complete, all as specified and directed.
S&F in repair stainless steel kitchen plate rack made of 0.80mm thick sheet of size 750x600x250mm and fixed to wall, complete, all as specified and directed.
S & Fixing in repair chromium plated brass single hole basin mixer with hot and cold arrangement with long shank and cup suitable for 15mm bore pipe complete, all as specified and directed.
S&F in repair chromium plated brass single hole wall mixer with hot and cold arrangement with long shank and cup suitable for 15mm bore pipe complete, all as specified and directed.
S&F in repairs brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete, all as specified and directed.
S&F in repair glass corner self assembly, fancy type, made of 6 to 7mm thick sheet glass of size 250x250mm, fixed with CP brackets, complete, all as specified and directed.
S&F in repair kitchen cabinet shutter with frame including shelves,drawer made of solid PVC Block board18/ 19 mm thick both sides decorative face having smooth outlet integral skin are made and shall be fixed to walls using required size sheet metal screw and solvent adhesive vertical and horizontal profile made of PVC 18/19mm solid board profile complete all as specified by manufacturer instruction complete, all as specified and directed.
S&F mild steel framed work as in doors / gates / steel frames / chowkats etc. of angle or other section with gusset plates, rails, braces, grill etc., complete conforming to Grade E-165 (Fe 290), drilled for fixing of steel sheeting or other covering including necessary welding complete, all as specified and directed.
S&F 50 micron powder coated aluminium anodised frame/chowkat of Aluminium door /ventilator section of 100x44x1.60to1.8 mm thick fixed with rawal plug and screw or wire expansion hold fasteners complete, all as specified and directed.
S&F anodized 50 micron powder coated aluminium door shutters,, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (3 Nos), suitable handle (2 No.), hydraulic door closer etc complete all as specified & directed.
S&F 50 micron powder coated anodized aluminium sliding window with section of size 88x44.45x1.5mm with one or more rebate (consisting 03 no shutter with track) consisting of 5mm thick reflective glass incl fixing aluminiumm shutter having top and bottom rail size 112mmx37mmx1.5mm incl jointing cleats, glazing rubber packing aluminium beading channel screw complete all as sepcified and directed.
S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.
S&F in repairs Aluminum (Die cast body) hydraulic door closer regulated designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified
S&F 50 micron powder coated for aluminium anodized gril size 6mm dia of aluminium bar mesh size75mmx75mm and fixed to aluminium window ventilator complete, all as specified and directed.
S&F stainless steel kitchen plates fixed to lower mould of drawer of size 21"x20"x04" complete, all as specified and directed. MAKE -Ultra Freh/ House Care.(Thickness of plates as per manufacturer instruction)
S&F stainless steel cutlary having size 21"x20"x04" complete, all as specified and directed. MAKE -Ultra Fresh/House Care..(Thickness of plates as per manufacturer instruction)
S&F MS sliders of size 21" for facilatate to drawer slide on steel ball bearing ,fixed with screw/nut and bolts complete, all as specified and directed. Make ozone or equivalent all as directed.
Demolition of reinforced cement concrete in floors, beams, chajjas, beam etc complete all as specified and directed.
M/L RCC 1:2:4 type B1 (using 20 mm graded aggrigate)as in slab,chajjas,beam etc including demolition of reinforced cement concrete in floors ,beams ,chajjas,landing slab in any position or height and similar suspended works complete, all as specified and directed.
Form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exc 200mm thick complete, all as specified and directed.
M&L 10mm dia and over deformed bars, cut to length, bent ot shape required, including cranking, bending , hooking ends and binding with and including mild steel wire(annealed not less than 0.9mm dia) icluding welding,rivetting etc complete, all as specified and directed.
Repair of Chajjas by completly removing old broken plasters or pieces of concrete and dubbing out with cement mortar 1:4 or by cement concrete 1:2:4 (12.5 mm graded aggregate) incl necessary formworks and GI wire netting 0.90 mm dia and 12 mm mesh for propper bonding of concrete/ mortar and finally finishing the surface smooth and even w/o using extra cement and applying the finish matching from the neighbouring areas complete (plan area of chajjas to be measured)
Demolition and breaking up or taking down PVC/AC/CI/SSW 100mm bore pipe drain pipes, set in cement mortar including PCC haunching and bedding, complete.
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed.
S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.
S&F 75 mm PVC (SWR) floor trap, plain with CP grating, with or without hole including jointing with solvent cement
Repair of iron gates, window frames and similar articles by welding complete as directed.
S&F in repairs 100 mm CP gratings with or without hole, fixed with white cement complete
S&F 110mm bore PVC (SWR) bend, any radius, complete all as specified and directed.
S&F 75mm bore PVC (SWR) bend, any radius, complete all as specified and directed.
M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified.
M/S Reliance Construction
Rakesh Traders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .