SPL REPAIR OF BLDG NO EM-98 OF CB-16 UNDER GE NASIRABAD.

Taking down cement or cement lime plaster on stone/brick wall, ceiling incl. Raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M& L for rendering in cement mortar (1:6), 15mm thick on stone masonary surfaces finished fair and even complete all as specified and directed

M&L for rendering 15mm thick in CM 1:4 on stone masonry, external surfaces finished fair & even complete all as specified and directed

M & L for rough cast plaster using crushed stone of size between 6 mm to 10 mm, coarse sand and cement mixed in the ratio of (1:1:1) over and including rendering coat of 15 mm thick on fair faces of brick work or concrete surfaces or stone masonry surfaces or other than fair faces of brick work or on one side of lathing (on vertical surfaces) in cement mortar 1:4 finished even complete all as specified and as directed.

M & L for applying at new plasterd/rough cast palster surface two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M & L for old plaster/rough cast plaster surface applying two coats of 100% Premium acrylic exterier paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M & L for preparation of newly plastered surface of wall and applying two coats of Distempering with 1st quality acrylic internal distemper having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over 1mm wall care putty and one coat of alkali resistant priming paint, complete all as per manufacturer's specification complete all as specified and directed.

Demolition of cement concrete (unreinforeced) in floors and paving n.exc 15cm thickness (above or below ground level) complete all as specified and directed.

M & L for machine cut and mirror polished kota stone slab flooring 20 to 25 mm thick over 20 mm thick cement mortar screed (1:6) base, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.

M & L for machine cut and mirror polished kota stone slab flooring 20 to 25 mm thick but verticle surfaces with screed bed 10mm thick CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.