PROVN OF TWO WHEELER PARKING SHED NEAR ENTRANCE OF STN HQ MAIN GATE AND CONSTRUCTION OF STORM DRAINAGE SYSTEM AT J1 TO J5 OFFRS MD ACCN AT ROYAL ROAD AND ADDN ALTN TO BUILDING NO P-216 IN NAVAL ARMAMENT INSPECTORATE AND BLDG NO P-6 AT ROYAL ROAD AND

Amount

Excavating in post holes (or similar holes) each in hard / dense soil not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removal of excavated materials to a distance not exceeding 50mtr and making good surfaces, complete all as specified and directed

Plain Cement concrete type D2 1:4:8 using 40mm graded stone aggregate in foundations, filling and mass concrete etc all as specified and directed.

Rolled Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

Preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in ridges fixed with self tapping screws all as specified and directed.

Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundiations etc or for shafts, wells, cesspits, manholes, pier holes, etc 10 sqm on plan and not exceeding 1.5 mtr in depth hard / dense soil and getting out all as specified and directed.

PCC 1:3:6 type C-2 using 40mm graded aggregate) for surface channel bed / drain complete all as specified and directed.

Pre-cast cement concrete block masonary with solid blocks, type C1, 1:3:6, 20 mm graded aggregate, exceeding 10 cm in width and setting in mortar, in CM 1:4 complete all as specified and as directed.

PCC 1:2:4, type B-1 using 20 mm graded stone aggregate as in coping, benching, bed block, lintel band, plinth courses, etc and similar work including necessary form work complete all as specified and directed.

Rendering 10mm thick in cement mortar 1:4 on fair faces of brick/ stone wall or concrete surfaces as backing coat all as specified and directed.

M&L Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete using extra cement included forms, moulds mitred / stopped ends etc.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm in hard/dense soil, complete all as specified and directed

Removing excavated soil/ material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point all as specified and directed.

Providing Precast cement concrete for lintels RCC type B1, 1:2:4 (nominal mix) using 20mm graded stone aggregate set in cement mortar 1:4 complete all as specified and directed.

Mild steel deformed TMT bars 10mm dia and over cut to length, bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

M&L for brick work with sub class "B" bricks using old size bricks, straight or curved on plain exceeding 6 m mean radius, built in cement mortar (1:6) all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard dense soil all as specified and directed.

Reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed.

Reinforced cement concrete (nominal mix) Type B1, 1:2:4 using 20 mm graded stone aggregate as in foundations, including rafts, footing, foundations, beams, plinth beams, bases for columns, etc., basement slabs, under reamed piles and mass concrete etc complete all as specified and directed.

Reinforced cement concrete (nominal mix) Type B1, 1:2:4, using 20mm graded stone aggregate as in beams, cantilevers, shelves, bressummers, lintels complete all as specified and directed.

Mild steel TMT bars 8mm dia cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Rendering 5 mm thick in cement mortar 1:3 on other than fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) all as specified and directed

Hardcore of broken stone or boulders of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface all as specified and directed.

Moorum / Red bajri filling in floors or pavings laid in layers not exceeding 15cm, spread, levelled and rammed including watering all as specified and directed.

100 mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base and finished even and fair complete all as specified and directed.

75mm thick plain Cement concrete , 1:3:6, type C-2 using 40 mm graded stone aggregate as in plinth protection/ path complete all as specified and directed.

25mm thick Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floor all as specified and directed.

Steel windows or ventilators, fixed type with glazing bars as per SSR all as specified and directed.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layers of capacity 500 Ltr hoisted and fixed in position with proper inlet and outlet connections all as specified and directed.

GI pipe 15mm dia medium grade with all fittings fixed on wall, ceiling or laid in floors including testing complete all as specified and directed.

Pillar taps, 20 mm bore, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed in repairs all as specified and directed.

20mm bore stop valves cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union fixed in repairs all as specified and directed.

PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and as directed.

Vitreous China squatting pan, ‘Orissa’ pattern of size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including connection to trap and flushing pipe, anti syphonage pipe, etc. complete including making good to floor fixed in repairs all as specified and directed.

Vitreous china wash basin, white flat back size 550 X 400 mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of taps, fixing of supply and waste pipe complete all as specified and directed.

Supply and fix Health faucet (Jet Spray) , CP 15 mm dia with flexible pipe and fixing nut etc complete fixed in repairs complete all as specified and directed.

PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified and as directed

Factory made solid panel PVC door shutter 30mm (Stile) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame all as specified and directed.

Butt hinges extruded Aluminium alloy with galvanized mild steel hinge pin, anodized and fixed, type C-21, with MS hinge pin 100mm size all as specified and directed.

Aluminium anodised alloy handles fabricated type 150mm size all as specified and directed.

150mm long aluminium anodised barrel tower bolt of extruded section all as specified and as directed.

300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Plain sheet glass 4mm thick, ordinary quality and glazing with oil putty / wooden beading in squares not exceeding 0.50 Sqm in each pane all as specified and directed.

15mm bore bib tap cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed all as specified and directed.

Precast cement concrete, type B1, 1:2:4 using 20mm graded stone aggregate, set in cement mortar 1:4 as in cover slabs all as specified and directed.

Screed bed or bedding layer 15mm thick for laying floor finishes in CM 1:6 all as specified and as directed.

Non-skid coloured ceramic tiles 7 to 8mm thick (square / rectangle) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

Coloured glazed ceramic tiles 300 x 200 x 6-7mm thick as in skirting / dado set and jointed in neat cement slurry and pointed in coloured cement to match colour of the tile including backing coat/ screed 10mm thick in cement mortar 1:4 on fair faces of brick / stone wall surfaces complete all as specified and directed.

Use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick column, beam etc (Horizontal or sloping) rough finished all as specified and directed.

Granite black 20mm thick table rubbed and polished in steps, window cills, cooking platforms and like in single piece set in neat cement slurry and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and as directed.

PVC connections 15mm size of length 450mm with PTMT nuts all as specified and directed.

PVC valveless, syphonic action type, low level flushing cistern, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Complete removal of existing treatment on surfaces of wall and applying one coat of wall primer (water thinable/ solvent thinable) two coat of acrylic wall putty for making the surfaces smooth and even including sanding each layer to receive next new layer, and applying two coats oil bound emulsion distemper to be applied by approved applicator of the manufacturer of the paint and all as spcefied and as approved.

Applying two coats of cement based paint, over a coat of alkali resistant primer including preparation of newly plastered surfaces complete all as specified and as directed.

Applying three coats of white wash on ceiling surfaces including preparation complete all as specified and directed.

PVC (SWR) pipes 160 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and as directed.

Cutting into existing manholes for connecting new drains of 150mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed.

Brass CP towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats fixed on walls, complete all as specified and directed.

Liquid soap container PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats fixed on walls, complete all as specified and directed.

Brass chromium plated bottle trap 32 mm for wash basins with inlet and outlet screwd for pipe or connections incl necessary packing, union and cap all as specified and directed.

PVC (SWR) 75mm dia bore pipe single socketed in any length, with rubber ring joint fixed on wall with PVC clamp in repairs complete all as specified and directed.

Supply only liquid water proofing compound all as specified and directed.

12 mm thick toughened glass in required size crystal polished at the edges and with full etched design as approved by the engineer in charge in different colours fixed with SS brackets of size 50 x 25 mm, 10 mm long made out of 3 mm thick SS Sheet at the top and bottom including provision of Dorma XLC fittings & Dorma floor springs or SS Pivot, stainless steel hinges to connect glass to glass, wall to glass connector, magnetic seal, middle seal and the water dispenser etc all as specified and as directed by Engineer in Charge.

Aluminium anodised (Minimum anodisation is 15 Microns) Door / Window / Ventilator / Partition frames and shutters ( 02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws handles, locking arrangement etc, complete with standard aluminium sections, all as specified and as directed. Note: Weight of various Aluminium sections shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, Prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).

Supply only 4.00 mm thick sheet glass ordinary quality and glazing with oil putty in Square exc 0.5 sqm in each pane all as specified and as directed.

Supply only 12 mm thick pre-laminated particle board, exterior grade, pre-laminated on both side with decorative choice lamination fixed with aluminium beeding as in door panel.

Door closer aluminium (extruded section) body hydraulically regulated designation No.3 universal type suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg and fixed complete all as specified and as directed.

Demolition of Cement Concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding all as specified and directed.

50mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate as in sub base of flooring,complete all as specified and directed.

Vitrified Ceramic tiles 10mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 including demolition of existing tiled flooring all as specified and directed.

Vitrified Ceramic tiles 10mm thick (vertical surface) polished, area of each tile not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:3 in backing coat of dado / Skitring including demolition of existing tiled flooring all as specified and directed.

Cutting holes exc half brick but not exc one brikck in stone walls built in CM or in cement lime mortar for inserting holdfasts & Making good dismantled portion in CM (1:3) or PCC (1:2:4) type B1 as specified and as directed.

Plates (plain or chequered), channels, square cut or notched (Ordinary and counter sunk) forming holes, without any attachments all as specified and directed.

Bands, straps, supports or stays for rainwater, ventilating pipes including bolts, if requried hooks (stay), heavy for large gates, hook and pintle hinges, large hasp and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe 290 Gde E-165 all as specified and as directed.

PVC (SWR) bend of any radius 110 mm dia complete all as specified and as directed.

Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless wire staples complete all as specified and directed.

Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of size 20mm (minimum weight 15mm -142gms) all as specified and directed.

GI pipe light grade of size 40mm dia for cable protection in trenches/ floor, fixed on pole/wall etc all as specified and directed.

Sand cushioning to PVC cable using clean dry and natural river sand gently punning below/around cable complete all as specified and as directed. Note: Punned thickness only will be measured.

S&F in 20 mm dia nipple of PTMT, suitable for HDPE water tank, min weight 45 gms, complete as as specified and as directed.

Supply and install hi wall split units indoor / outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for butter indoor air quality with minimum 3 star rating and EER 3.2 of capacity 2 TR Complete all as specified and as directed.

Taking down unserviceable plug and socket and Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20amps SP MCB 240V all as specified and directed

240V, 10KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP in the MCB DB complete with connection testing and commissioning all as specified and directed.

Sub main wiring with two runs of 4.0 Sqmm single core unsheathed PVC insulated multistranded copper conductor cable 1100V grade along with one run of 4 sqmm single core cable for earth continuity through PVC conduit pipe and accessories including taking down existing submain wiring complete all as specified and directed. Note: 3 runs of cable and one run of PVC conduit pipe shall be measured as one RM.

Earthing complete with galvanised steel earth plate electrode size 600X600X6mm thick buried directly in ground vertically to a depth not less than 2.25m below normal ground level with top edge of earth plate not less than 1.5m below normal ground level connected to and incl GI earth lead wire 4mm dia by means of bolts ,nuts, check nuts & washers of galvanised iron and connected to test point all as shown in electrical plate No 3 of SSR part I-2009 and as specified or indicated and testing on completion incl excavation and earth work in any type of strata available at site ,PCC (1:3:6)type C-1 earthing chamber ,pre cast RCC slab 50 mm thick in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with welded steel wire fabric (XPM) weight not less than 4 kg/sqm, funnel with GI watering pipe of 20 mm bore medium grade, wire mesh and lugs, GI protection pipe of 15 mm bore light grade up to 7.5 mtr long, etc complete all as specified and directed.

Supply and fix Voltage Stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with out put voltage stabilized at 230 V with accuracy of + 2.5% and of capacity 5 KVA with digital display

Supply and install hi wall split units indoor / outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for butter indoor air quality with minimum 5 star rating and EER 3.2 of capacity 1.5 split type AC single phase 50 HZ incuding inbuilt dual inverter type including all necessary copper tubes for connection of equipments and provision braket for outer unit installation on wall complete all as specified and aa directed.

Cutting chases in stone masonry wall/concrete floor/roof for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3, and making good, cutting not exc 10cm girth all as specified and directed

Point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed stranded copper conductor single core cable 1100 volts grade in and including PVC conduit medium grade complete with conduit fittings/accessories with provn of 1.2 mm thick MS/PVC terminal boxes of suitable size and 3 mm thick plastic laminated sheet top cover for housing of switches, sockets etc including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan point controlled by one switch 5Amps SP all as specified and directed.

Switch piano flush type 5 Amps SP, one way all as specified and directed.

Ceiling rose, 3 terminals PVC / polycarbonate, isolated body all as specified and directed

LED tube light along with fixture 20W all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 5 watt 220 V AC decorative type with driver holder and LED lamp incuding connecting up with 3 core flexible coppe conductor cable of suitable size complete.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, Voltage 230 V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm

MCB DB double door type, single pole of 4 way 230 Volt ISI marked all as specified and directed

MCB SPN 32 Amps, 230 volts complete all as specified and directed.

MCB SP 06-32 Amps, 230 volts complete all as specified and directed.

Supply, testing and replacement of LT UG Cable, 1100 volts grade, XLPE insulated screened PVC bedded, Galvanised steel strip or wire armoured, electric power cable (heavy duty) with stranded aluminium conductor of size 10 Sqmm x 2 Core laid in trenches / ducts, fixed on wall / inside panel, drawn through pipe including taking out old unserviceable LT cable complete all as specified and directed.

Steel tubing light grade galvanized with all fittings and laid in trenches / fixed on walls / floors of size 25mm bore all as specified and directed.

Sub main wiring with two runs of 6.0 Sqmm single core unsheathed PVC insulated multistranded copper conductor cable 1100V grade along with one run of 6.00 sqmm single core cable for earth continuity including PVC conduit pipe and accessories including taking down existing submain wiring complete all as specified and directed. Note: 2 runs of cable, one run of earth continuity conductor and one run of PVC conduit shall be measured as one unit length.

MCB DB double door, 04 way VTPN surface mounted with IP 43 protection and matching with the existing surface and connections all as speficied and as directed.

MCB TPN / FP 40 Amps, 16 KA adjustable thermal setting all as specified and directed

Supply, testing and replacement of LT UG Cable, 1100 volts grade, XLPE insulated screened PVC bedded, Galvanised steel strip or wire armoured, electric power cable (heavy duty) with stranded aluminium conductor of size 50 Sqmm x 3½ Core laid in trenches / ducts, fixed on wall / inside panel, drawn through pipe including taking out old unserviceable LT cable complete all as specified and directed.

Rigid non-metallic PVC conduit of size 40mm dia exclusive of boxes (Junction / terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, clamps etc all as specified and directed.

M&L or well burnt bricks sub Class 'B' as in protection of cable laid dry, flat abutting each other width wise as specified and as directed.

S.RAMACHANDRAN

M/S SHAJAHAN BUILDERS

T SANJEEV KUMAR