SPECIAL REPAIR TO BLDG NO P-59 (1 TO 18) OR MARRIED ACCN AT RATNUCHAK UNDER GE KALUCHAK

Amount

B&R PORTION:- Taking down chowkats or frame with shutters (without taking off shutters from the frames) area not exceeding 1.5Sqm each including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt) & removing from site, complete all as specified.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4.0Sqm each including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt) & removing from site, complete all as specified.

Taking down shutters of any description exe 1 sqm n exe 2.00 Sqm and refixing it in same opening after carriying out alteration, complete all as specified.

Taking down shutters of any description exe 1 sqm n exe 2.00 Sqm including iron mongrey complete all as specified.

Taking down shutters of any description not exceeding 1sqm each including iron mongrey, complete all as specified.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dustetc including brushing neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified & directed.

Demolition of cement concrete of any description at any floor(including sunken floor pcc) not other wise described

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for)and removing unserviceable material outside cantt area, complete all as specified and directed.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed.

Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed.

Dismanting floor, hearth or wall tiling including cement mortar bedding (but not backing) & rubbish off the premises complete all as specified and directed.

PCC 1:2:4, nominal mix, type B-0, using 12.5mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified.

Brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4, complete all as specified.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening complete all as specified & directed.

Factory made solid panel PVC moulded door shutter with particle board core 28 to 30 mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face supply and fixing in frame at site as per specification and drawing.

200 mm long aluminium anodised barrel tower bolt of extruted section ISI marked complete all as specified and directed.

Aluminium handle ,cast type, anodised of size 150mm long, complete all as specified.

Mild steel butt hinges, medium weight, cold rolled,100mm long, complete all as specified.

2nd class hard wood plain solid straight chowkats wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints etc, complete all as specified.

Mild steel hold fast and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed.

PCC type B1, 1:2:4 using 20 mm graded crushed stone aggregate as in bed block for securing holdfast etc, complete all as specified.

Pressed steel frames (factory made) made out of 1.25 mm thick black MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete size of frame 165x60mm including bottom of each chowkat to be welded with 2 Nos 25x25x3mm thick flat iron projecting 10 cm on either side, Complete all as specified and directed.

Pressed steel frames (factory made) made out of 1.25 mm thick black MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete size of frame 105x60mm including bottom of each chowkat to be welded with 2 Nos 25x25x3mm thick flat iron projecting 10 cm on either side, including one shop coat of red oxide zinc crome primer etc. Complete all as specified and directed.

Plain Cement Concrete 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate as in back filling of pressed door frames, complete all as specified.

30mm thick, flush shutters, soild core construction, with block board core and plywood face panels commerical type both faces is covered with decorative face veneer with lipping/frame to match and complete all as specified & directed.

Plain framed panelled shutters factory made 35mm thick of 2nd class hard wood rail and style (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12 mm veneered particle board with commerciel venering on both faces. the size of rail and style as per IS:1003 (part I) kiln seasoned and chemically pressure treated, complete all as specified.

35 mm thick 2nd class hard wood factory made glazed & skeleton shutters, open rebated & prepared to receive glass gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a); complete all as specified and directed.

Mild steel pressed handle, oval type 150mm long, stove enamelled black, with bright bolt and fixed complete all as specified & directed.

200mm long, Mild steel barrel tower bolts stove enamelled black with bright bolt and fixed complete all as specified.

MS sliding door bolts 300mm long, plate type, enamelled black, with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified & directed.

Mild steel 300mm, ordinary rat tail rod pattern springs including roller & roller plate, fixed in repair, complete all as specified and directed.

Floor door stopper 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified.

High density polyethylene pipes (HDPE) 40 mm dia for working pressure rating 6 Kg/Sqcm including necessary fittings complete fixed in repairs, complete all as specified and directed.

Mild steel chromium plated curtain rod 19 mm dia with fixing brackets ,stops ,rollers etc, of standard thickness and of any length fixed in repair, complete all as specified and directed.

18mm thick Prelaminated particle, board, exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and as directed.

Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps 30mm, complete all as specified & directed.

40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished, complete all as specified & directed.

150mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified.

Mild steel magnetic catches of size 50 mm, complete all as specified and directed.

S & F in repairs cast brass Screw eye 10 to 12 mm internal dia and fixed, complete all as specified.

Non skid ceramic coloured tiles of size 300 x 300x 7 to 8mm thick ( Square or rectangular) as in floors laid over & including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of floor, complete all as specified.

Glazed ceramic plain / printed tile 350x450x7 mm thick on vertical surface as in Dado. Skirting etc (coloured tile) fixed over & including 10 mm thick plaster in CM 1:4 set and jointed with neat cement slurry and printed with white cement to match the tiles, complete all as specified.

Non skid joint free ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match shade, pattern, laying etc of tiles, laid over and including 15mm thick screed bed in CM (1:4), complete all as specified and directed.

Non skid joint free ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.11 sqm but n exc 0.18 sqm in skirting, dado etc, set and jointed in neat cement slurry and pointed in coloured cement to match shade, pattern, laying etc of tiles, laid over and including 10mm thick backing coat in CM (1:4), complete all as specified and directed.

Machine cut Kota stone slab flooring not less than 19mm thick, laid over & including 15 mm thick screed base in CM 1:6, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine, complete all as specified.

Machine cut Kota stone slab not less than 19mm thick as in riser of steps, skirting, dado and pillar laid over & including 15 mm thick screed base in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine, complete all as specified.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings steps, cills, sunshades, shelves, lintels etc; and cutting cheses for concealed water tubing or concealed conduit wiring etc. and making good, cutting n.exc 10cm girth in brick work, complete all as specified.

Steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified.

20 mm bore steel tubing, medium grade, galvanished with all fittings like socket, union, elbow, bend, tees etc and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

15 mm bore angle valves, cast copper alloy CP, screwed down, high pressure, with crutch or butterfly handle, weight not less than 450 gms screwed both ends for iron pipe or for unions fixed in repairs, complete all as specified and directed.

15 mm bore brass stop cock, cast copper alloy CP with long shank and cup (concealed type), high pressure, with capstan head handle, weight not less than 450 gms screwed both ends for iron pipe or for unions fixed in repairs, complete all as specified and directed.

Bib tap cast copper alloy, chromium plated 15mm dia with capstan handle screwed down screwed for iron pipe or for brass ferrule fixed in repairs, complete all as specified and directed by Engr-in-charge.

Vitreous china squatting pan 'Orissa pattern, size 580x440 mm white, with integral foot rest and P or S trap and connection to flushing pipe, anti-syphonage pipe complete including provision of cement concrete bedding and making good to floor as existing, fixed in repairs, complete all specified in SSR part I complete all as specified and directed.

Vitreous china wash hand basin, white, flat back, corner type, size 450 x 300 mm excluding taps, waste, chain & plug and porcelain stopper but including brass chromium plated waste coupling, and waste pipe PVC 32mm dia including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified.

PVC low level flushing cistern valve less,syphonic action type of 10 ltrs capacity white with inlet, ball valve, float and handle including cast iron brackets, PVC flush pipe 32mm dia, fixed in repairs, complete all as specified and directed.

PVC connection 15mm size with PTMT nuts on both ends of length 450mm fixed, complete all as specified.

15mm dia CP pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot or Cold' with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and directed.

CP brass shower rose with or without swivel joints, 125 mm size including fixing to steel pipe or union, fixed in repair, complete all as specified.

CP grating doom 100mm dia (Minimum weight 25 gms ) including embedding in tiles with white cement, fixed in repair, complete all as specified.

PVC (SWR) floor trap of 75mm dia of outlet, plain including jointing with solvent cement fixed, fixed in repair, complete all as specified.

PVC (SWR) multi floor trap of 75mm dia of outlet, plain including jointing with solvent cement fixed, fixed in repair, complete all as specified.

110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including dismantling of old unserviceable pipes complete all as specified.

75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including dismantling of old unserviceable pipes complete all as specified.

110 mm bore PVC (SWR) bends provided with oval access door any radius, fixed in repair, complete all as specified.

75 mm bore PVC (SWR) bends provided with oval access door any radius, fixed in repair, complete all as specified.

PVC (SWR) vent cowl for 110mm dia fixed in repair, complete all as specified.

PVC (SWR) branch piece, single (single Y) equal or un equal 75mm bore fixed, fixed in repair, complete all as specified and directed.

PVC (SWR) junction, single (single T) equal or un equal 110 mm bore fixed, fixed in repair, complete all as specified and directed.

Box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick MS sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes will be measured and paid seperately) with side hung shutters with MS handles and MS peg stay dovetailed or welded incl 02 Nos, MS Tower bolts 150 mm long for each leaf and 08 mm square bar grill / guard bars at spacing as shown on Drg welded to MS flat iron frame work ,including other fittings ,hinges ,MS handles ,tarred hold fasts ,PCC blocks for hold fasts etc all as shown on Drg No CEPZ/TD -354/09 sheet 1/3 to 3/3 including one coat of of red oxide zinc primer, complete all as specified and directed by Engr-in-charge.

20 mm thick granite black (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills cooking platforms & like in cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite laid over and including Screed bed or bedding layer of mortar 20mm thick for laying floor in CM 1:4 finished even & rough to receive top layer, complete all as specified and directed.

Complete removal of the existing sunken treatment including roughing and prepration surfaces of old concrete floor by picking , scurubbing down with steel brushes ,sweeping clean and washing down with water to remove dust etc.and applying the following treatment complete all as specified (a) 15mm thick rendering plaster on fair faces of brick work or cement surfaces in cm 1:4 mixed with water proofing admixture by weight of cement to sunken portion including wall of sunken portion with proper slope towards outside and finishing cement concrete or brick work surface even and smooth using extra cement finishing concrete including walls of sunken portion with proper slope all as specified and as directed by Engineer-in -charge. ( NOTE :- Water proofing admixture shall be measured and paid separately) (b) Applying Ist course of bitumenous primer @ 0.4 ltr /sqm conforming to IS-3384 over plastered surface. item contd to item No 73.01

(c)Applying 2nd course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperatureand applied @ 1.2 kg/sqm. (d)Applying 3rd course of APP (Atactic Polypropylene) modified polymeric 3mm thick weight not less than 3.6 kg/sqm with 160 Grams/sqm non woven polyster made at center core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane has to be laid with LPG torch and overlap sealed and finished neat . (e)Applying 4th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature and applied @ 1.2 kg/sqm

PCC (1:7:12) type F2 using 40 mm graded stone aggregate as in filling and mass concrete, complete all as directed and is specified

Rendering 15mm thick plaster in CM (1:3) on fair faces of brick/concrete surfaces of sunken floors, including taking down extg plaster and mixing of water proofing compound, finished even and fair complete, all as directed and specified NOTE: WPC will be measured and paid separately.

Cutting/drilling hole in Brick wall/RCC beam by mechanical mean exc 300mm deep in slab of WC/ Bath with and including fixing in cement mortar 40mm dia and 45cm long GI Spouts pipe all as directed by Engr in Charge

Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements, complete all as specified.

PCC type B 0, 1:2:4 using 12.5 mm graded crushed stone aggregate as in sunkun floor or mass concrete, complete all as specified.

Soap dish, brass chromium plated type fixed to plugs with chromium plated brass screws, complete all as specified and directed.

Tubular towel rail, 20mm dia D type 60cm long between flanges of brass chromium plated, complete all as specified and directed. Make: Prayag Cat No-BA-20 or equivalent cat part No of Make as specified in Appx 'F' here in after.

Complete removal of existing roof treatment of any description viz. tarfelt or membrane surface or roof tiles etc. including grubbing up of tree roots and removing all the debris to a distance n.exc 100m and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove all loose dirt / dust etc and applying the following roof treatment complete all as directed:- (a) Applying Ist course of 15 mm thick cement screed in CM 1:4 over concrete surface. (b) Applying 2nd course of bituminious primer confirming to IS-3384 @ 0.4 lit/sqm over the screed bed. (c) Applying 3rd course of a coat of binding material with blown type bitumen of grade 85/25 heating to working temperature of 180 0 C and applied @ 1.2 kg/sqm. Item contd to item No 81.01

(d) Applying 4th course of APP (Atactic polypropylene) based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) laid with 75 mm side overlap and 100 mm overlap by forced / torch application as per manufactures instructions. (e) Applying 5th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180 degree C and applied @ 1.2 kg/sqm over APP membrane, complete all as specified and directed.

PCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in roof padding including in any thickness and finished even and fair without using extra cement, complete all as specified and directed.

Rotational moulded polyethylene water storage tank (cylindrical vertical closed top, tripple layered) hoisted and fixed in position capacity of tank 500 litre including dismantling of existing tank of any description and with and including 20 mm ball PTMT Ball valve high pressure with exposy coated aluminum rod and high density plastic ball screwed for iron pipe.

Gun-metal globe or gate valves with iron handle quarter turn type, screwed both ends for iron pipe or for unions of 20mm dia bore and fixed in repairs, complete all as specified.

Brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified.

Cleaning the surface of of RCC chajja, parapets etc with wire brushes, washing down with water, taking out cement plaster of any thickness including scrubbing down loose portion complete of height upto to 11.00 mtrs of roof chajja / fins, external surfaces of chajja portion including necessory scaffolding / formwork if required & applying dubbing coat of plaster of epoxy concrete of required thickness and plastering 10mm thick in CM 1:4 and applying two coats of acrylic cementious brush applied water proof coating with dry film total thickness of approximate 1mm thick as in patches all as per manufacturer's instruction, complete all as specified and directed. (Make- Dr Fixit Pidilite 2K or equivalent product of M/S Chemistek, M/s Prime etc)

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed.

Rendering 15 mm thick plaster in cement mortar 1: 6 on other than fair faces of brick work or concrete surfaces, finished even and smooth with out using extra cement, complete all as specified & directed.

Rendering 5 mm thick plaster in cement mortar 1: 3 on concrete surfaces as in ceilings finished even and smooth without using extra cement, complete all as specified.

15 mm thick rendering on fair faces of brick work or concrete surfaces of walls etc 10 mm thick in CM 1:6 and 5 mm thick in CM 1:4 incl water proofing compound as per manufacturers instruction & finished the surfaces even and smooth without using extra cement, complete all as specified and directed. Note : WPC WILL BE MEASURED AND PAID SEPERATELY

Supply only liquid water profing compound, complete all as specified & directed.

75 mm thick cement concrete (1:2:4), type B-1 using 20mm graded crushed stone aggregate as in plinth protection and laid in alternate bays complete and finished the even & smooth without using extra cement and providings joints through out the thickness of plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three part of sand by weight all as specified and directed

Applying three coats of white wash on wall including preparation of newly plastered surfaces, complete all as specified and directed.

Applying two coats of white wash on wall including preparation of old plastered surfaces, complete all as specified.

Applying three coats of white wash on ceiling including preparation of newly plastered surfaces, complete all as specified and directed.

Applying two coats of white wash on ceiling including preparation of old plastered surfaces, complete all as specified and directed.

Complete removal of existing treatment, rubbing down and stopping of distempered white wash or any type of treatment and applying two coats of oil bound distemper over a coat of alkali resistant primer on old plastered surface with and including wall care putty 3mm thick over plastered surface of wall, complete all as specified.

Preparation of newly plastered surface of wall and applying two coat of oil bound distemper over a coat of alkali resistant primer , white or tinted shade, complete all as specified.

Preparing surface of new wood and wood based material of any description, not otherwise described over 10 cm width or girth, and treated with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Preparing surface of new or previously untreated steel surfaces of any description, not otherwise described over 10 cm width or girth, and treated with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Preparation of newly plastered surfaces of wall and applying two coats of cement base paint over & including priming surface, complete all as specified.

Preparation of old treated plastered surfaces of wall and applying two coats of cement base paint, complete all as specified.

Preparation of new plastered surfaces of wall & applying two coats of exterior grade weather proof paint, complete all as specified.

Preparation of old plastered surfaces of wall & applying two coats of exterior grade weather proof paint, complete all as specified.

Sheet glass ordinary quality, 3mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, complete all as specified.

3mm thick figured glass, pin head type and glazing with oil putty or wooden beads in square n.exc 0.5 sqm each complete all as specified & directed.

Stainless steel sink with drainage board 1mm thick for kitchen or laboratory wih plugs, washers and wastes including fixing bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410mmx330mmx160mm, with and including waste coupling and waste pipe of length 90cm, fixed in repairs, complete all as specified.

Fixing only in repairs stainless steel sink with drainage board 1mm thick for kitchen or laboratory wih plugs, washers and wastes including fixing bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, with and including waste coupling and waste pipe of length 90cm, fixed in repairs, complete all as specified.

Kitchen plate rack of stainless steel of size "30x31x10" inches complete all as specified and directed. Make:-Prayag cat part No-P-346 or Equivalent cat part of make as specified in Appx 'F' here in after.

Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tank or galvanised wire staple, complete all as specified.

Precast Reinforced cement concrete type B1, 1:2:4 (using 20 mm graded crushed stone aggregate ) as in in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, complete all as specified and directed.

Demolition of cement concrete (reinforced ) in any position of any description (reinforement cut as required to facilitate demolition), complete all as directed by Engineer-in-Charge.

TMT bars 6 to 8 mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking end and binding with and including mild steel wire(annealed) not less than 0.9 mm dia or securing with clips, complete all as specified.

Factory made coloured precast tile top layer glazed made with white cement & pigment and the base in grey cement of of size 300mm x 300mm x 20mm in different colour and pattern (compressive strength not less than 250 Kg/Sqm) as approved by GE, set in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over & including 15mm thick screed bed or bedding layer of cement mortar 1:6, complete all as specified and as directed. Make : Mahindra Industries Pkt/Satish and Ish Industries Pkt/Kreative concrete Industries Kangra/Royal tile Pb/Star tiles & Engineering Works, Jalandhar/Oyster / Dure Stone/ Oak /ONYX TM.

75 mm thick PCC 1:4:8 type C-2 using 40 mm graded stone aggregate as in sub base of floors to receive top layer, complete all as specified and directed.

Excavating in trenches not exc 1.5m wide and not exc 1.5 m in deep or foundation etc for shafts, wells,cesspits, man holes, pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5m depth and getting out in any type of soil, complete all as specified.

Returning, Filling in soil including spreading, leveling, watering and well ramming in layers not exc 25cm, complete all as specified.

Removal of excavated material to a distance exc 50m not exc 250m and depositing where directed at a level not exceeding 1.5mtr above starting point, complete all as specified and directed.

Demolition or breaking up drain pipe (salt glazed stone ware AC or reinforced concrete) set in cement mortar including PCC bedding haunching of 200mm bore of pipe stone, complete all as specified and directed.

Concrete bed to drain pipes of 200 mm dia including packing under and haunching against the sides of pipes with concrete, after they are laid in cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) and testing including necessary form work, complete all as specified.

Cutting into existing manholes for connecting new drains (internal dia of pipe 200mm), making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required, complete all as specified and directed.

Salt-glazed stoneware (SGSW) grade-A drain pipes 200mm bore laid and jointed in concrete bed complete including testing etc. all as specified and directed as per SSR Part-I specifications, complete all as specified and directed.

Preparation of old painted wooden or wood based surfaces of any description not otherwise described, over 10cm width or girth including knotting and stopping as required and applying one coat of synthetic enamel paint, complete all as specified.

Preparation of old painted steel surfaces of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified.

E&M PORTION:- Taking down carefully unsv aluminium / copper conductor point wiring (light, fan, light socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.

Taking down carefully unsv main switch / DBs alongwith MCBs / wooden board / connected fittings & fixtures any type and making good distrubed surface of walls and roofs to match the existing surface, complete all as specified and as directed.

Taking down of electronic meter from existing position and depositing in MES store yard of AGE E/M and refixing the same after completion of work, complete all as specified & directed.

Point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLS insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLS insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked terminated into CI/pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc for one light/fan/bell point controlled by one, one way switch including cutting chases and making good to disturbed surfaces of wall / ceiling / floor including treating with existing finishes, complete all as specified and as directed.

All as per item No. 128 above but for 3 pin 5 Amps on same board with cable 1.5Sqmm size, all as specified and directed

Description all as per srl item No-128 here in before but for one 3 pin socket outlet 6 amp independent, complete all as specified.

Description all as per srl item No 128 here in before but for one 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for main wiring and 2.5 sqmm as in continuous earth wire, complete all as specified.

Switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified.

Switch socket multipurpose combination 2 in 1, 2 pin & 3 pin, 6 Amp flush type universal,complete all as specifed.

Switch socket multipurpose combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal,complete all as specifed.

Ceiling rose (ISI Marked) 3 terminals PVC/poly carbonate, insulated body, compete all as specified.

Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings with and including Inverter LED lamp 9Watt, 6500K, 900lm in white colour of cap B-22 with poly carbonate diffuser and aluminium heat sink, complete all as specified and directed.

Fan regulator stepped type (electronic ) flush type for 1200/1400mm sweep AC ceiling fan, complete all as specified. .

Bell push piano flush type 6 Amp, (ISI marked), complete all as specified.

Musical door bell, 230 volts AC supply all as specified and directed by Engineer-in-Charge.

Tube light fitting integrated type suitable for LED 20W indoor decorative aluminium extruded T5 LED batten complete with hosing with all assessories prewired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting, complete all as specified and directed.

Sheet metal enclosure factory made (Double door) for DBs, single pole and neutral, 240 volts, 12 way with 200Amps rated bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning, complete all as specified. Make:-Legrand Cat part No :-5076 22 or equivalent cat part of make as specified in Appx "F" here in after.

MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series all as specified. Make:- Legrand cat part No-4085 87 to 4085 95 or Equivalent cat part of make as specified in Appx 'F' here in after.

MCB single pole and neutral 06 to 32 amps 240 volts 10 KA 'C' series all as specified. Make:- Legrand Cat Part No 4086 18 or Equivalent cat part of make as specified in Appx 'F' here in after.

Vertical distribution board TPN IP 43-'IK 09 with bus bars neutral links blanking plates double door suitable for FP MCCB upto 160 A as incommer and out going SP/TP MCBs 4 ways complete all as specified and directed. Make:-Legrand Cat part No :-5077 45 or equivalent cat part of make as specified in Appx "B" here in after. Note:- MCCBs and MCBs shall be measured and paid separately

Thermal magnetic release MCCB 415 volts 4 Pole, rating 100 Amps,having short circuit and over load protection, repturing capacity 16 KA , complete all as specified.

Sub main wiring with single core cable 2x 6 sq mm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade including 20mm cancealed PVC rigid conduit / surface PVC casing caping medium grade alongwith 1x 4 Sq mm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface with & including taking down old unsv sub main wiring of any type, complete all as specified and directed. Note:-2 wire of 6sqmm,1 wire 4sqmm and one run of pvc conduit shall be measured as one unit.

Earthing complete with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironincluding PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh, 15mm dia bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection pipe, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion. Note:- Rate for earth lead wire & protection pipe upto 7.5mtr length are inclussive in this item & no extra payment shall be admissible for the same.

LED streetlight luminnare 60 Watt 230 volts made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP66 protection, 5700K and impact resistance of IK07 complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of 1.5 Sqmm size to light fitting complete all as specified and directed. Make:-Havells Cat Part No:-LHETA XU7PN6J060 or Equivalent cat part of make as specified in Appx 'F' here in after.

GI bracket made of 40 mm bore medium grade pipe made to shape of length 1.2 mtr fixed with two set MS clamp 40 X6 mm nut bolt & washer for fixing streat light fitting complete all as specified and directed.

Exhaust fan 230 mm sweep, heavy duty, single phase AC 230/240V 50 Hz AC, heavy duty totally enclosed with energy efficient motor, pre-lubricated double ball bearing ,speed 1400 RPM, complete with louvers for wall mounting incl cutting holes, grouting, holding down bolts, nuts, washers and provision of flexible PVC insulated copper conductor cable 3 core 0.75 sqmm from ceiling rose to exhaust fan with and including plastering in CM 1:4, Brick work in CM 1:4 and distempering to disturbed surface as per existing, complete all as specified and directed.

Supply, fixing and testing Geyser (water heater) storage type of capacity 25ltrs, 5 star rating, 2000 watt rated power, with all accessories including inlet and outlet heavy duty PVC connection 15mm bore with brass nuts, washers complete on both ends & provn of suitable size nuts,bolts for fixing / achoring the geyser, electric cable & plug top and socket including making MES No on geyser with synthetic enamel paint, complete all as specified.

Supply, fixing and testing AC single phase 240 Volts 50 HZ ,ceiling fan of size 1200mm Sweep complete in white colour ,5 Star rating as per BEE with canopy with all accessories incl nuts,bolts,clamps etc. for fixing ceiling fan and provision of flexible copper conductor cable 3 core from ceiling rose to fan including taking down old unsv ceiling fan, complete all as specified and directed. Make :- Havells Cat Part No ES-50 Premium, Crompton Cat Part No Entrust 50 or equivalentas specified in list of make mentioned in Appx 'F'.

Single pole and neutral enclosure with two pin and earth plug and socket complete with and including one single pole MCB 10 Amp 240 volts, complete all as specified

Cutting existing steel tubing 15mm bore for alterations or additions (Each cut measured), complete all as specified.

Screwing existing steel tubing 15mm bore for alterations or additions (or lengthening screw on pipe to form connector), complete all as specified.

M/s Sekinder Paul Sharma

GENESIS INDIA

M/S Vishwakarma Builders

M/S MOHAN LAL GUPTA

NARESH KUMAR AND COMPANY