Annual operation and maintenance of DG sets, HT & LT OH network , 33 kv/ 11 kv Electrical Substation , indoor & outdoor electrical appliances including wiring of 415 V/230 V system and AC machines & stabilisers at Jogigopa Construction complex including Dy.CE's officies, ORH etc. and Officer & Sr. Subordinate rest house at Bilasipara for a period of two year under NMX-JPZ new line project.

A-Man power required for annual operation.

Manpower required for carry out repair, operation and maintenance of DG sets and panel maintenance & supervision of 33KV, 11KV & 1.1KV outdoor & indoor installations along with repair, operation & maintenance of 23 nos AC machines, stabilizers etc.

B-Supply of HSD oil running of 125 KVA & 200 KVA DG sets including

Supply of HSD oil running of 125 KVA & 200 KVA DG sets including cost of carrying, handling, storing of fuel by contractor's own arrangement.

C-Supply, Execution and maintenance

Diesel filter O ring

Liner piston set

Diesel pipe tank to filter

Coupling with bolt

Lub oil pipe rocker supply

CR bolt and nut

Supply of Lube oil(Lubricating oil) for running of DG set

Supply installation testing & commissioning of150/160AH,12V fully charged lead acid battery

Supply, storing & fitting of following electrical appliances: 6A flush type modular switch

6A flush type modular socket

16A flush type modular switch

16A flush typemodular Socket

Angle/Batten Holder

Starter for AC modular type

Modular type Ceiling fan Regulator Suitable for 220/250V AC supply.

18/20 watt LED box type indoor fitting

Supply of Fan Capacitor 2/2.5 mfd

Wooden screw of Misc. sizes note:- Unit should be read as Std. pkts

Outdoor type LED Street light fitting 45 watt

Outdoor type LED Flood light fitting 150 watt

LED lamp 9 watt

Supply & handing over of 6A flush type modular switch

Supply & handing over of 6A flush type modular socket

Supply & handing over of 16A flush type modular switch

Supply & handing over of 16A flush typemodular Socket

Supply & handing over of Angle/Batten Holder

Supply & handing over of Plug Top 6A

Supply & handing over of Plug Top 16A

Supply & handing over of Starter for AC modular type

Supply & handing over of Modular type Ceiling fan Regulator Suitable for 220/250V AC supply.

Supply & handing over of 18/20 watt LED box type indoor fitting

Supply & handing over of Fan Capacitor 2/2.5 mfd

Supply & handing over of Outdoor type LED Street light fitting 45 watt

Supply & handing over of Outdoor type LED Flood light fitting 150 watt

Supply & handing over of LED lamp 9 watt

Supply & handing over of MCB SP 6Amps

Supply & handing over of MCB TPN 32Amps

Supply of MCCB 63A, 4 pole, 25 KA, Ics=100% Icu with adjustable thermal & magentinc setting conforming to IS : 13947-II

Supply of MCCB 32A, 4 pole, 25 KA, Ics=100% Icu with adjustable thermal & magentinc setting conforming to IS : 13947-II

Supply & handing over PVC casing capping of size 25-32mm

Supply & handing over PVC casing capping of size 20-25mm

Supply & handing over of LT multi-stand flexible copper cable single core 1.5mm2

Supply & handing over of LT multi-stand flexible copper cable single core 2.5mm2

Supply & handing over of LT multi-stand PVC copper cable single core 6mm2

Supply & handing over of LT multi-stand PVC copper cable single core 10mm2

Supply & handing over of PVC insulated tap Red-Green-Blue type5m/10m roll.

Supply & handing over of self supporting folding Aluminum ladder of 8 feet long platform.

Supply and erection of earthing by 50 mmGI pipe IS:1239/1990(Pt-I) of 3.60mm 65 thickness 3mtr long including construction ofearth pit, RCC earth cover slab with filling/mixing of salt,charcoal etc of required quantity and earth continuty by25x3mm GI strip with GI nuts bolts washer etc. includingwelding, earth resistance flag etc.

Supply & wiring of light/ fan /call bell /exhaust fan points bysingle core 2.5mmsq stranded copper cable through PVCCasinng and capping to be fixed on wall/ ceiling by 66 suitablearrangement including cieling rose or angle/batten holder withshed, 6amp flush type controlling switch on half flush MS boardwith hylum sheet top of suitable size. Connection by copperflexible cable from cieling rose is also to be made and earthcontinuity by single core 2.5mmsq stranded copper cable.

Supply & erection of LED bollard 9/8 watt as per catalogue number C&S: MUSCA/9watt or Similar as per direction of Site Engineer.

Supply, installation, testing & commissioning of Geyser 15 ltrs capacity, 5 star rated, and vertical storage type complete with all accessories by grouting MS angle/MS flat with suitable size washer, bolts & nuts etc on wall as per instruction of Engineer In charge at site.

Supply, erection and commissioning of DK Thermoplastic cable junction box of size 200 x 160 x 98mm fixed on MS angle of size 40X40X5mm, 2X60mm length including CC Foundation etc.

Supply & handing over of Split type 1.5 ton 3/5 star rated Split type Inverter air- conditioner suitable for 230 V, 50 Hz AC supplywith remote.

Supply & handingover of Pedestal Fan 400mm Sweep suitablefor 230 V, 50 Hz AC supply.Model-swing colour- white SKU code FHSSWSTOWH16 make: Havells, Goldmedal, orient.

Supply & handingover of Wall Bracket Fan 400mm sweep .suitable for 230 V, 50 Hz AC supply. Model Sameera White SKU code- FHWSUSTWHT16 make: Havells, Goldmedal, orient

Supply , laying and stringing of ACSR conductor Rabbit of size 6/1/3.35 mm conforming to IS: 398-ii-1985

Supply, laying, binding & stringing of 2 nos. guard wire 8SWG including cross bracings

"Supply and erection of composite polymer insulators made of one piece injection 75 moulded directly to high quality corrosion resistant and sealed to hot dipped galvanized carbon steel end fittings by bead of silicon rubber complete with all accessories conforming to IEC: 1109 standard or as per IS: 731 (1971) , & 2488 (Pt-II) 1974. 11 KV Disc insulator (> = 70 KN) complete with hardware fitting "

11 KV Pin insulator (10 KN) complete with all accessories

"Supply & erection of 2P Composite Polymer ball & socket type Disc insulator complete with all accessories conforming to IEC : 1109 standard or as per IS : 731 (1971) & 2488 (Pt- II) 1974 complete with hardware fitting : (for 33 KV ball & socket type Disc insulator ( 90 KN)) "

"Supply & erection of 2P Composite Polymer ball & socket type Pin insulatorcomplete with all accessories conforming to IEC : 1109 standard or as per IS :731(1971) & 2488 (Pt-II) 1974 complete with hardware fitting : (for 33 KV Pin insulator ( 10 KN)) "

"Supply and erection of 3Nos. Zinc Oxide Station class lightning arrestor with normal 79 Discharge current rating of 5KA as per IS: 3070-III (1993),complete with galvanized clamping arrangement, GI bolts, nuts, washer etc. (3Nos in a set) suitable for following :- 3 wire 11KV with rated Voltage 9KV (RMS). "

"Supply and erection of 3Nos. Zinc Oxide Station Class-I lightning arrestor with a 80 normal discharge current rating of 10KA as per IS:4004 (1985), complete with galvanized clamping arrangement, GI bolts, nuts, washer etc. (3Nos in a set) suitable for 3 wire 33KV with rated voltage 30KV(RMS) "

Supply of HT (11/33 KV) fuse element 3 A

"Supply & fixing of GI angle size 65x65x6mm clamped with above pole made by MS flat 50x5mm with 50x16mm bolts, nuts for holding insulators, lightning arrester with necessary 2.2 mtr long bracket hole by drill including painting "

"Supply & fixing of MS angle size 50x50x5mm, with pole made by MS flat 50x5mm With 50x16mm bolts, nuts for holding insulator including necessary hole by drill and painting. 1.5 mtr long bracket "

"Supply & fixing of MS angle size 50x50x5mm, with pole made by MS flat 50x5mm With 50x16mm bolts, nuts for holding insulator including necessary hole by drill and painting. 1.2 mtr long bracket "

"Supply & fixing of MS angle size 50x50x5mm, with pole made by MS flat 50x5mm With 50x16mm bolts, nuts for holding insulator including necessary hole by drill and painting. 0.65 mtr long bracket "

Compressor for 1.5 ton window/split type room Air-conditioner.

Heating condensing coil (1.5ton)

Cooling coil (1.5ton)

Blower motor 1.0/1.5/2ton

Blower fan Runner.

Compressor for water cooler.

Box type relay or open type relay for water cooler.

Thermostat switch of water cooler.

Blower motor of water cooler.

Compressor (New) for freeze.

Supply and filling of Cooling Gas for AC.

Supply and erection of Stabilizer for AC.

Copper pipe 3/8, 5/8

Insulation pipe complete with (5/8'' x 1/4'' size both in aset/length)

PCB with remote

capacitor 40-50 MFD for RAC

Capacitor 4 MFD for RAC

Capacitor 36 MFD for RAC

Supply, testing, erection & commissioning of water purifier cumcooler of 50 ltrs storage capacity similar to Eureka Forbes Modelno. 50LPH-BASIC

Yearly preventive maintenance of air conditions as per standard maintenance 106 schedule including supply & replacement defectivecomponents and repairing/rewinding compressor,blower motorthermostate,heating elements including refilling of refrigerant etc.Compressor for 1.5 TR split type RAC

Supply and erection of heat shrinkable type cable termination kit suitable for 11 KV S/c 120/185/240 sq mm cable

Supply & erection of heat shrinkable outdoor typecable termination kit for jointing of 33 KV grade single240/300mm2 armoured aluminium cable

Supply, installation, testing & commissioning of 5 KVApure sine wave digital type inverter with specifications: Segment Office : KVA ; wave form : Pure Sine wave; Feature : Auto Reset, LED indicator ; Technology :Modified PWM using IGBT, Voltage : 96 V

Supply & erection of 11 KV GO switch 400A, 3 pole rocking type each consist of 110 galvanized base 3 no. HT insulators as per BSS/ISS non ferrous knife & spring loaded contacts, arching horns of adequate sections to break magnetizing current of the transformer horizontal GI pipe of adequate length for phase separation and GI pipe of adequate length for operation from round level and operating handle complete in both ON & OFF positions.

Supply and erection of 11KV DO fuse double stackchannel type 200Amps,capacity

Supply & erection of 33 KV GangOperated Air break off loaddisconnecting switch - 200/400Amp3 pole rocking type each poleconsist of galvanised steel base, HTinsulators as per 112 BSS/ISS nonferrous knife and spring loadedcontacts, arching horns of adequatesections to break magnetisingcurrent of the transformerhorizontal Gi pipe of adequatelength for phase separation and25mm dia, 3.65mm thickness GIpipe of adequate length foroperation from ground level andoperating handle complete in bothOn & OFF positions.

Supply & erection of RCCB 16/40A, 300mA, DP conforming to IS :12640/2000

Supply of MCCB 4 pole, 125A, 25KA conforming to IS : 13947/II

Supply, erection, testing & commissioning of 100kva transformer starrated, 50Hz, 3- ph, ONAN cooled, vector group Dyn11,off circuit tap changer having range +.5% to -5% in steps of 2.5% each with first filling of oil, copperwound, outdoor type, Delta/Star step downdistribution transformer with 2.32 KW load loss atrated voltage and frequency corrected for 750Cwinding 115 temperature fitted with rating plate, twoearthing terminals, lifting lugs, drain valve with plugor cover plate, dehydrating silicagel breather, archinghorn, first filling of oil as per IS : 335, oil levelindicator with minimum marking, rollers, explosionvent, oil filling hole with cover, conservator,marshalling box, air release device, HV-outdoorbushing, LV-outdoor bushing, Oil temperatureindicator with other accessories conforming to IS :2026-I to V with latest amendments.

Supply & construction of transformer pad with CCfoundation by cement, sand and 116 chips of 19mm orless with 74x40x40x6mm GI channel on the corner ofthe foundation complete with nuts, bolts etc. asrequired and as per direction of Engineer In charge atsite. (Contractor has to approve foundation drawingprior to execution)

Supply & spreading of pebbles of size 40-50mm in100mm thickness ( area to be covered 25 mtr x 15mtr)

Supply, Installation, testing & commissioning of 4/5star rated 7.5 HP submersible pump with 3 starmarking directly coupled through sleeve type couplingwith water cooled and water lubricated submersiblemotor suitable for 3 phase 415 Volts + 10% - 15%,50 Hz +/- 3% in cast iron 118 stage bowl. Pumpset shallbe fitted with Bronge impeller and shaft of Chromesteel. Pump shall be fitted with tilting pad type thrustbearing segment complete with 3 mtr flat cable. The motor stator body should be made of stainless steelwith following specifications :- a. Discharge............................ 54000 ltr/hr. b. Head.................................. 40 Mtr c. H.P.................................. 7.5 HP d.Starting................................... Star/Delta ( 415V ,3 Phase )

Supply, Installation & Commissioning ofPanel for Submersible Pump starterAutomatic 119 start Delta 7.5 HP, 5.5 KW,Relay Range : 9-14 Amps. with Hourmeter & incorporting heavy duty 4 polecontactor, overload relay, auto startswitch, 3 position selector switch for SPPAuto/SPP Manual/Manual, Dual analog VAmeter, Hour meter (To monitor SPCUpower ON hour), RYB LED Indicator,Motor ON & Trip LED indicator, TP 'C'curve MCB for short circuit protection etc.

Supply & handing over of Front plate 16 Module for Modular switch

Supply & handing over of Front plate 12 Module for Modular switch

Supply & handing over of Front plate 8 Module for Modular switch

Supply & handing over of Front plate 6 Module for Modular switch

Supply & handing over of Front plate 4 Module for Modular switch

Supply & handing over of Front plate 2 Module for Modular switch

Supply & handing over of 4P Miniature Circuit Breaker (MCB) 40Amps ,C Curve 6kA

Supply & handing over of 4P Miniature Circuit Breaker (MCB) 32Amps.,C Curve

Supply & handing over of Miniature Circuit Breaker (MCB) SP40A ,C Curve

Supply & handing over of Miniature Circuit Breaker (MCB) DP6A - 32A C Curve

Supply & handing over of Miniature Circuit Breaker (MCB) DP40A C Curve

Supply & handing over of Miniature Circuit Breaker (MCB) TPN MCB40A C Curve

Supply & handing over of Miniature Circuit Breaker (MCB) TPN MCB 63A C Curve

Supply & handing over of MCCB250A, 4 pole, 36kA, Ics=100%Icu with adjustable thermal & magnetic setting conforming to IS: 13947-II

Supply & handing over of MCCB160A, 4 pole, 36kA, Ics=100%Icu with adjustable thermal & magnetic setting conforming to IS: 13947-II

Supply & handing over of LED post top LANTERN 40 watt as per catalogue number of polycab item code no: PGR0201007 or Similar

Supply, testing & hanading over of 250mm sweep Ventilating Fan PVC Body.

Supply, testing, and handing over of 5 star rated 3/4 Bladed BLDC type ceiling fan 1200mm sweep..

Supply & erection of 12Watt LED Recess mounted Downlight, round shaped with Slim, compact, auminum die cast edge lit panel. Recess mounted round fixture with opal diffuser and separate electronic driver., IP-20 ingress protection, Eco-friendly,complete with all accessories.

Supply, testing and handover of OIL FILLED RADIATOR electric room heater of 1 phase, 220-250 volt, 50 Hz 2000 watt , model: HESTIO OFR 9 Wave Fin 2400 W, Grey, Item Code: GHHFHAGK150 Make: Havells or similar