REPAIR MAINT TO DRAIN MANHOLES CLEANING OF SEPTIC TANK SOAKAGE WELL SEWAGE LINE AND FOOTHPATH FENCING BOUNDARY WALL HARDSTANDING PERIODICAL SERVICES TO CERTAIN BLDGS REPAIR MAINT TO BR WORK IN CERTAIN BLDGS AT MUZAFFARPUR MILITARY STATION UNDER GE

M&L for cleaning of WCs and cleaning of sewage line from gully trap to 1st manholes day to day basis as per complaint slip on working day only by manually [a gang of 2 personnels (un skilled) including all necessary T&P] complete all as specified and directed. Note- The attendance of labour shall be recorded in register daily and signed by contractor, JE (Civ) & Engineer In Charge for record of measurement.

Desludging of septic tank including sludge pits etc manually for cleaning them throughly and removing muddy soils/sludge to a distance not exc 500mtr and buried it in pits or otherwise disposed off out side defence land including dewatering of efflorescents from septic tank, soak well etc by means of 7.5 HP non clogging diesel driven pump with necessary disel, T&P etc in nearest drain complete as directed for the following sizes :-

10 - 25 users septic tank

50 users septic tank

100 users septic tank

150 users septic tank

Ditto all as per serial item No 2 above but man holes of any depth and any size.

Cleaning of sewage line and connected manholes (any length) from manhole to manhole, manhole to septic tank septic tank to soakwell (n. exc 50 mtr) byusing bamboo sticks or MS rodsand revolving with rope and well flushing after cleaning and removing mud / sludge etc and burried it in pits and disposed off the same outside defence area complete all as specified for 150 mm bore of pipes and 200 mm bore pipes.

Dewatering of efflorescents from septic tank / soak well etc of any capacity by means of 7.5 HP non clogging diesel driven pump with necessary disel, T&P etc in nearest drain complete all as specified and directed. Note : Date and time of the dewatering shall be entered in register and signed by contractor, JE (Civil) and Engineer in charge for record of measurements.

M&L for cleaning of sludge of any type from drain and clear to flow of water as directed including removing the excavated sludge n.exc. 50 m and depositing where directed at a level to a distance n.exc. 1.5 m above the starting points complete all as specified and directed.

Cutting out any type of vegetation complete from root grouted inside the wall specially in contact with sanitary pipe and pouring/grounting with hydrochloric acid (HCL) on left out roots if any including making good surfaces to match adjacent surfaces in PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) or 15mm thick plaster in CM (1:4) area exc. 0.5 but n.exc. 1.0 Sqm each complete all as specified and directed.

Cleaning and removing all scale and dirt, etc. from PVC water tanks of capacity exc 250 ltrs and not exc 500 ltrs and from mouths of circulating pipes, etc. complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) bends any radius including taking excisting complete all as spd and directed.

S&F in repair 75 mm bore PVC (SWR) bends any radius complete all as spd and directed.

S&F in repair 110 mm bore PVC (SWR) branch piece , single equal or unequal complete all as spd and directed.

S&F in repair 75 mm bore PVC (SWR) branch piece , single equal or unequal complete all as spd and directed.

S&F in repair 110 mm bore PVC (SWR) junctions, single (SingleT) equal or unequal complete all as spd and directed.

S&F in repairs 110 mm bore PVC (SWR) vent cowl complete all as spd and directed.

S&F in repair 75 mm bore PVC (SWR) vent cowl complete all as spd and directed.

S&F in repair 100 / 110 mm bore PVC (SWR) 'P' trap complete all as spd and directed.

S&F in repair 100 / 110 mm bore PVC (SWR) 'S' traps complete all as spd and directed.

M&L in repair 75 mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs 75mm dia PVC (SWR) pipes single sockedted in any length with rubber ring joints, laid in trenches or in floors all as specified and directed. (Note : earth work will be measured & paid separately

S&F in repairs 110mm dia PVC (SWR) pipes single sockedted in any length with rubber ring joints, laid in trenches or in floors all as specified and directed. (Note : earth work will be measured & paid separately

S&F in repairs 110mm dia PVC (SWR) pipes single sockedted in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F in repairs 75mm dia PVC (SWR) pipes single sockedted in any length with rubber ring joints, fixed to walls all as specified and directed.

Demolition of reinforcement cement concrete of any description and in any position not otherwise specifically provided for

M&L precast RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in man hole cover slabs and set in CM (1:4) after demolition of existing man hole cover complete all as specified and directed.

M&L Mild steel TMT bars 10 to 12mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

All as per item no. 25 but 6mm to 8mm

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level)

Plain Cement concrete 1:2:4 type B-1, (using 20mm graded stone aggregate) 100 mm thick in floors

Demolition of brick work built in cement mortor including all quions arches pillar etc. but excluding concrete arches.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 and finished even and smooth (without using extra cement)

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc. or for shafts, cesspits, manholes, pier holes etc. n.exc 10 sqm on plan and n.exc 1.5 mtr in depth and getting out in soft / loose soil complete all as specifed and directed.

Returning filling in, including spreading levelling watering and well ramming in layers not exc 25 cm in soft / loose soil.

Removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point.

Demoletion and breaking up drain pipe of 150mm bore (salt glazed stoneware , AC or reinforced concrete ) set in cement mortar complete all as specified and directed.

Demoletion and breaking up drain pipe of 200mm bore (salt glazed stoneware , AC or reinforced concrete ) set in cement mortar complete all as specified and directed.

M&L for cement concrete bed to drain pipes in cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) including packing under and haunching against the sides of pipe 150 mm dia after they are laid and tested complete all as specified and directed.

M&L for cement concrete bed to drain pipes in cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) including packing under and haunching against the sides of pipe 200 mm dia after they are laid and tested complete all as specified and directed.

M&L for 150 mm bore salt glazed stoneware (SGSW) drain pipes grade 'A' laid in trenches and jointed in cement sand mortar 1:1 with spun yarn complete all as specified and directed.

M&L for 200 mm bore salt glazed stoneware (SGSW) drain pipes grade 'A' laid in trenches and jointed in cement sand mortar 1:1 with spun yarn complete all as specified and directed.

M&L for providing plain cement concrete (1:4:8) type D-2 (using 40 mm graded stone agregate) as in foundation, filling and mass concrete

M&L for providing plain cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in coping, water toughs including weathering, slighting rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

Plain Cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in surface channels and drains.

Taking down cement plaster on wall of any description incl racking out joints hacking for key and scrubbing down with water complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note : Liquid WPC will be measured and paid separately.

Supply only integral water proofing compound (Liquid).

M&L two coat of cement base paint over primer on wall including preparation of newly plastered surfaces.

M & L for 75 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr interval and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3.

S&F in repair vitreous china wash basin, white, flat back of size 450X300 mm complete all as specified and directed.

S&F in repair tubular towel rail of brass chromium plated, 20mm dia, D type, 60 cm long between flanges inluding brackets complete all as specified and directed.

S&F in repair 450mm long PVC connection of size 15mm with PTMT nuts etc complete all as specified and directed.

S&F in repair Bib tap 15 mm bore standard or PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm 90gms)

S&F in repair PVC flushing cistern 10 ltr capacity including bracket fixed to wall & flush pipe complete ISI marked

S & F rotational moulded polyethylene water storage tank of capacity 500 litrs (Cylindrical vertical with closed top) hoisted and fixed on position all as specified in SSR Pt I.

S & F PVC ball valve 20mm dia with epoxy coateed aluminium rod and high density ball (minium weight 210 gms) complete all as specified and directed.

M&L in repair 75 mm dia of cast iron nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) complete all as specified and directed.

S&F in repair vitreous china squatting pan, Orissa pattern size 580 x 440 mm white with integral foot rest incl connection to trap, and to flush pipe, anti-syphonage etc including making good to floor complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolt, flushing cistern and flush pipe) but including sheet cover of white colour all as directed and specified.

M&l Vitreous china urinal half stall type , white with grating and union for discharge pipe including providing and fixing plug , bedding urinal against wall in cement mortar 1:2 , securing urinal to plugs with and inclu 60mm long brass screws, pointing arround urinal back in cement , fixing automatic flushing cistern with brackets , flush pipe, waste pipe , (exclusive of fixing supply pipe to flushing cistern , trap and waste pipe) complete all as specified and directed.

M&L for CP Urinal spreader for fixing with 15mm bore pipe complete all as specified and directed.

M&L for sand filling under floors or in foundations, laid in layers n exc 15 cm thick, spread levelled including watering and consolidation complete all as specified and directed

M&L old size brick work with sub class 'B' bricks laid flat in floors laid in dry complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate), 100mm thick

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate), 55 mm thick as in flooring complete all as spd and directed.

M & L for preparation of newly plastered or un-plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

Dismantling of floor hearth wall tiling including cement mortar bedding complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointd in white cement mixed with pigments to match the shade of tiles over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L coloured ceramic glazed tiles 300x450x7mm thick as in dado/skirting set & jointed in neat cement slurry & pointed in white cement mixed with pigments to match the shade of tiles over and including 10 mm thick rendering in CM 1:4, complete all as specified and directed.

M&L For Chequred cement concrete tiles (pre painted coloured rubber moulded ) 30cmX30cmX20-25 mm thick set jointed and pointed with grey cement slurry mixed with pigment to match the shade over and inclusive of 20mm thick screed bed of CM(1:6) complete all as specified and directed.

S& F MS post and strut in fencing including cutting top to shape as directed ,driling holes ,noatching for wire etc ,flat iron filet (for securing wire mess etc) including all necessary drilling holes notching or riveting erc,and similar work conforning to Fe-410 or FE-310 complete all as specified and directed.

S&F chain link fencing in 4mm dia galvansied steel wire weight n.exc 4 kg per sqm 100 x 100 mm diagonal shape, mesh, made up, including link line wire, in fencing including straining and fixing to wood, concrete or steel posts and or to straining bolts, including securing with and provision of gavanised iron tying wire gavanised iron staples or steel pins etc all as directed.

S&F for galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standered rails straining bolts including securing or typing at crossing with and provision of ganvanised MS wire stapples or steel pins etc as directed (each line wire to be measured)

M&L two coat synthetic enamel paint over a coat of red oxide on steel surfaces of any description over 10 cm in width or girth not otherwise described including preparation of steel surfaces complete all as spd and directed .

M&L 10 mm thick cement plaster on fair faces of concrete surfaces with cement mortar 1:3 finished even and smooth (without using extra cement) complete on ceiling.

M & L for preparation of newly plastered or previously untreated surfaces of walls and applying two coats of Oil emulsion distemper over a coat of chalk whiting with 3mm Birla/JK wall care putty complete all as specified and directed.

M&L for preperation of new plastered surfaces and applying three coats of white wash on wall surfaces complete all as specified and directed.

M&L for applying two coat of cement base paint on prepared new wall surfaces over a coat of primer on wall including preperation of new surfaces etc complete all as specified and directed.

M&L for two coats of white washing on new surfaces in ceiling incl preperation complete all as specified and directed.

M & L for preparation of old decorated surfaces of external walls of any description by washing ,rubbing down and applying one coat of apex paint (weather proof) complete all as specified and directed.

M&L for preparing old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots and applying one coat of white wash complete all as specified and directed.

M&L for preparing old decorated plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots and applying one coat of white wash complete all as specified and directed.

M&L for preparing old decorated plastered or unplastered surfaces of walls any description by washing, rubbing down and applying One coat of cement paint complete all as specified and directed.

M&L for preparing old decorated plastered or unplastered surfaces of walls any description by washing, rubbing down and applying one coat of distemper oil emulsion, white or tinted including 3mm thick Birla/JK wall care putty complete.

M&L for preparing old decorated plastered or unplastered surfaces of walls any description by washing, rubbing down and applying one coat of distemper oil emulsion, white or tinted complete all as specified and directed.

M&L for preparing old decorated plastered or unplastered surfaces of ceiling any description by washing, rubbing down and applying one coat of distemper oil emulsion, white or tinted complete all as specified and directed.

M&L for preparing old painted surfaces of wood and wood based materials of any description not otherwise descriped over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for Obliterating old writing of any description, n. exc 0.1 sqm with paint to match existing work. letters or figures (Block Roman, Italic or Indian) not exceeding 30 cm heights with synthetic enamel paint complete all as specified and as directed.

M&L for preparing old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of Aluminium Paint complete all as specified and directed.

Dismantling of wall/ceiling boards (fibre, pulp, insulation, etc) of any type including cover fillets.

S&F anodised aluminium snap grid ( size 605mm x 605mm) frame work for false ceiling with hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and fixing 4mm thick non asbestos fibre cement building building boards on aluminium framework complete all as specified and directed.

M&L 5 mm thick rendering on fair faces of bk /concrete surfaces as on ceiling in CM (1:3), finished even and smooth (without using extra cement ) complete all as specified and directed.

Roughing surface of old concrete by picking, sweeping, cleaning & washing down with water to remove dust etc. complete all as specified and directed.

M&L brushing neat cement slurry with 3 kg of cement per square meter complete.

M & L average thickness 25mm for plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate), as in padding / levelling course for maintain to proper slope of roof including necessary form work as required complete all as specified and directed.

M&L for 15 mm thick screed bed in CM 1:4 with water proofing compound @ 200ml /50kg of cement as per manufacturer's instruction finished surface even and smooth with out using extra cement including taking down of complete existing cement plaster etc complete all as specified and directed. (Note : WPC will be measured & paid for separately).

M&L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :- (i) Properly cleaning and drying concrete surfaces. (ii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm. (iii) Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm. (iv) Laying unrolled over the bitumen coat surfaces polymeric water proofing membrane, hyperplas standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction. (v) Applying a coat of aluminium paint @ 100 gm / sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / sqm duly sanded over polymeric membrane complete. NOTE:- The polymeric water proofing membrane shall be extended upto parapet walls and inserted in walls by cutting groove and making good with cement mortar 1:3 as directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. Exc 1.5 Sqm each

ditto as per above item but exc1.5 Sqm but n.exc. 4 Sqm.

Taking down shutters of any description but exc 1 Sqm & not exc 2 Sqm each

Refixing of shutter of any description exc 1 sqm and n exc 2 sqm in same opening complete all as specified and directed.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specified & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame wealded/sealed to the stiles & rails with sutable PVC sheet beading and jointed togeather with solvent cement, fix in frame complete all as specified and directed.

M&L for hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165

M & L plain cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in bed blocks,fillings for holdfast etc complete.

M/L 35 mm thick factory made (batten thickness) Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm thick BWP Commercial ply or 12 mm thick vineered particle board with commercial veneering on both faces and the size of memebers of shutter are as per IS: 1003(Part - 1), complete all as specified and directed.

S & F 30 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats.

S & F 35mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with sash bars) edges of framing plain chamfered or rounded fitted with cat and mitred beads for securing glass etc fitted to chowkats for windows, ventilators,etc complete, size of member of shutter as specified in SSR Part -I, Sec 8, clause 8.20 (b).

S&F steel windows with side hung shutters incl projecting type hinges with one no MS flat iron 25x3 mm of appx 200mm length and two nos MS Tower bolt 150mm long and one peg stay on each leaf complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel window, ventilators, fixed type, with glazing bars complete all as specified and directed.

S & F of pressed steel frame of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges lock strike plates etc complete all as specified and directed.

S&F framed work such as grills gratings etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron doors, ladders framed, baluster walk ways, railings, framework of water tanks & similar wk conforming to Fe410-0 or Fe310-0 .

S&F Galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks etc complete all as specified and directed.

Hacking out old boken glass(any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete all as specified and directed.

S& F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. Exc 0.5 Sqm in each pane.

S & F 4mm Figured glass pin head type and glazing with putty in squares n. exc 0.5 Sqm in each pane etc complete all as spd and directed.

S & F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long.

S & F Aluminium anodised handles of extruded section and fixed 125 mm long.

S & F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed.

S & F aluminium alloy anodised sliding bolt wth hasp & staple & fixing clips of sheet cast extruded section 250 mm long .

M/L preparation of new wooden surface any description over 10 cm width or girth and applying two coat synthetic enamel paint over a coat pink primer complete all as specified and directed .

M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

M&L for preparation of new plastered wall surface applying two coat of "Birla White wall putty"or" JK Wall Care Putty "to make the entire surface free from undulations complete all as specified and directed.

M&L Preparing New wall surfaces, priming plastered and other surfaces with alkali resistant primer and applying two coats of oil bound distemper of any shade on walls surfaces

M&L for applying two coats of cement base paint on prepared new wall surfaces over a coat of primer on walls including preperation of new surfaces etc complete all as specified and directed.

M&L for applying two coats of oil bound distemper on ceiling over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

Demoliton of cement concrete in ground floor paving n exc 15cm thickness ( below or above ground level ) complete all as specified and directed.

M&L Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base etc complete all as specified and directed.

M&L Cement concrete 1:2:4, type B-1 (using 12.5 mm graded stone aggregate) as in levelling course, coping, window cill etc complete all as specified and directed.

M & L 40 mm thick PCC type B - 1:2:4 using 20 mm graded stone aggregate as in flooring finish even & smooth using extra cement complete all as specified and directed.

Supply only 38mm wide glass dividing strips, 3mm thick complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6 type C-2 using 20mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3.

M&L for non skid coloured ceramic tiles 300 x300 x7mm thick in floors etc over & including 15mm thick screed bed in CM 1:6, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.

M&L coloured ceramic glazed tiles 300x200x6mm thick as in dado/skirting etc including 10 mm thick rendering in CM 1:4, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement

M&L for 9-10mm thick Light coloured vitrified ceramic tiles of size in floors, not exceeding 0.36 sqm set & jointed in neat cement slurry and pointed in coloured cement to match over & including 15 mm thick screed bed in CM 1:6 complete all as specified & directed.

All as per Item No 136 but as in Skirting with 10mm thick rendering in CM 1:4

M&L machine cut kota stone slab flooring 18-20mm thick over & including 20mm screed base in CM 1: 4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

All as per Item No 138 but as in Skirting with 15 mm thick rendering in CM 1:3

Demolition of cement concrete reinforced as in chullah hoods , shelves and plate form etc complete all as specified and directed

M&L for RCC as in kitchen platform, shelves type BO 1:2:4 (12.5 mm graded aggregate) including necessary form work complete all as specified

M&L for 18 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F Anodised aluminium frame Powder Coated for doors, windows, ventilators with one or morerebates including joining cleat for fixing etc. complete all as specified and directed.

S&F anodised aluminium door shutters, aluminium shutters, aluminium section weighing 0.55 Kg/m including necessary joining joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, anodised alumnium snap beading, screws etc. complete all as specified and directed.

M&L double action floor spring for aluminium doors hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including necessary cutting & making good to floor as per existing complete all as specified and directed.

M&L 9mm thick Prelaminated particle board,interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with alumunium frame work.

S&F 4.00 mm thick plain Sheet glass, area exc 0.5 sqm in each pane and fixed to aluminium frame work etc complete all as specified and directed.

S&F 4 lever brass mortice lock vertical type size 65mm long complete all as specified and directed.

Taking down aluminium doors shutters only (area exc 1.0 sqm but not exc 2.0 sqm each) and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium beads & cleats of existing make and also refixing the handles & mortice locks in existing position with and including new screws including refixing the door shutters in same opening complete all as specified & directed.

S&F in repairs PVC hand shower (Health faucet) with 8mm dia, 01 (one) metre long PVC tube and wall hook with plastic body complete all as specified & directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers, waste coupling, waste pipe incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as directed and specifed .

Taking up or steel tubing & connections including cleaning for refixing bore of pipe 15mm etc complete all as specified and directed

do but 20mm bore

Supply and laying of 16 mm CPVC Pipes SDR 11 & plain CPVC SDR 11 fittings on walls /ceiling or laying in floors including union, brass elbow,brass tee, MBTA, FBTA complete all as specified.

Supply and laying of 20 mm CPVC Pipes SDR 11 & plain CPVC SDR 11 fittings on walls /ceiling or laying in floors including union, brass elbow,brass tee, MBTA, FBTA complete all as specified.

S&F tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors 15mm bore etc complete all as specified and directed

do but 20mm bore

S&F in repair for Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc complete all as specified and directed.

S&F in repair for Gun-metal, globe or gate valves 15mm, with iron wheel head, screwed both ends for iron pipe etc complete all as specified and directed.

S&F in repair bib tap 15mm chromium plated fancy type long shank with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc complete all as specified and directed.

S&F in repair stop valve 15mm chromium plated screw down, high pressure with crutch or butterfly handle, screwed fboth ends for or iron pipe or for unions and fixed complete all as specified and directed.

S&F Chromium plated Angle cock 15mm two way screwed down for 15mm pipe complete all as spd and directed.

S&F in repairs15mm dia pillar tap cost copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without letered "Hot or Cold" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as specified and directed

S&F in repair 15mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mm dia concealed type stop valve fancy type chromium plated etc complete all as specified and directed

S&F in repair Brass chromium plated shower rose 125mm size fancy type with or without swelves joint fixed to iron pipe etc complete all as directed and spd.

S&F in repair MS conduit curtain rod with PVC coating fancy type drafry rod 20mm dia of any colour as a spproved with bracket and fixed to wall complete all as spd and directed.

S&F in repair vitreous china wash hand basin, white, flat back, size 550x400 mm incl chain and plug and porcelain stopper, brackets, waste pipe incl cutting for and pinning in ends of brackets or erecting stand including dismantling

S&F in repair, plastic water closet seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device for pedestal pattern WC white colour.

S&F in repair 32mm bore waste coupling of PTMT (half or full threaded) (Min wt 45 gms) complete all as specified and directed.

S&F in repair 32mm bore low density polyethylene (LDPE) pipes of pressure rating 6kgf/sqcm complete all as specified and directed.

M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair 0.63mm thick kitchen plate Rack made of stainless steel 600x750x220mm size fixing with wooden plug with suitable size of screws complete all as directed and specifed .

Disconnecting existing tanks exc 250 ltrs but n exc 500 of setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measuredseparately)

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc

Please Enable Macros to View BoQ information