ADDITION, ALTERATION TO MD ACCN AT SITE R AT AIRFORCE STATION THANE UNDER GE AF THANE

Amount

M & L for Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to stone and rubbish off the premises complete all as specified and directed.

M&L for non skid Ceramic coloured tiles 7-8 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including 15 mm thick screed bed in CM 1:4 for laying floor finishes complete all as specified and directed.

M & L for Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10mm thck in CM 1:3 as backing coat to receive tiles in vertical position as dado/skirting complete all as specified and directed

M&L for cement concrete Type C2 1:3:6 (40 mm graded aggregate) in foundations, columns, pillars, post holes filling and mass concrete including caps and bases as specified and directed.

M & L for Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L for Demolition of cement Concrete in Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; complete all as specified and directed.

M&L for formwork to edges of concrete flats, and similar work; complete all as specified and directed.

M&L for RCC 1:2:4 using 20mm graded aggregate nominal mix as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for TMT bar 10mm dia and over cut to length bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with MS wire not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L black granite (of any type) 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Material and labour for non-skid coloured ceramic tiles 7 to 8 mm thick (squre or rectangle) area of each tile exceeding 0.06 Sqm but not exce 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

S&F in repairs sink with drain board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 3330mm x 160mm complete all as specified and directed.

M&L for Bands, straps,supports or stays for rainwater pipes, hold fasts etc complete allas specified and conforming to Fe-290 Gde-E-165 etc. complete all as specified and directed.

S&F IInd class hard wood plain, solid, straight chowkat and frame wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M & L for 25 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame complete all as specified and directed.

M & L for 18/19 mm thick prelaminated Medium density fibre board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame complete all as specified and directed.

M&L for Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads, Exc 13 Sq cm & n Exc 25 Sq cm complete all as specified and directed.

S&F for 75 mm brass handles, cast type , polished type complete all as specified and directed.

M&L for 4 mm thick sheet glass n exc 0.5 sq.m in each pane fixing cabinet shutters with necessary screw/fittings complete all as specified and directed.

M&L for Stainless steel trolley made with perforated sheet of not less than 1.52 mm thick and SS edging wire and slided over SS telescopic runners which is fixed wall/stone with suitable screws of desired shape and size complete all as specified and directed.

S&F Stainless steel soft close hydraulic action hinge with capacity to take load of 12 to 20 mm thick board complete all as specified and directed.

S&F heavy duty SS Zink plated Teliscipic runners for SS trolleys having fully extended length min 500mm and 45.4 mm wide, loading capacity 45 kg/pair including concealed screws and bolts fixed to the wall or stone complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and n.exc 10 sqm on plan and n.exc 1.5m depth and getting out in hard/dense soil complete all as specified and as directed

Returning filling in including spreading levelling, watering & well ramming in layers not exceeding 25 cm in soil.complete all as specified and as directed.

Removing excavated soil to a distance n. exc 50 m and depositing where directed at a level n exc 1.5 metre above the starting point complete all as specified and as directed

Supply, spreading in trenches fine dry river sand for cable protection and removing down getting by hand complete all as specified and as directed

Supply and laying un reinforced precast concrete cable cover class LV, type-I, flat size 250mm x 150mm x 40mm laid in trenches complete all as specified and as directed.

Supply & laying XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric power cable with aluminum conductor, 1100 V grade, of the following sizes

35 Sqmm x 3½ core

50 Sqmm x 3½ core

70 Sqmm x 3½ core

95 Sqmm x 3½ core

M & L for submain wiring complete with 2 run of 4 sqmm copper conductor cable 1100 volts grade , FRLS type PVC insulated unsheathed flexible multi stranded duly colour coted drawing through PVC casing and caping of size 25 mm width or above as required at site as acceessories such as tee corners , overlapping connector etc of suitable size fixed on surface of walls / roof / ceiling and including one run of 4 sqmm single core copper conductor cable 1100 volts PVC insulated and unsheathed (green colour) 1100 volts grade for earth continuity conductor and connecting with main earth dolly including removing old unserviceable item complete and making good the disturbed surfaces to match with existing all as specified and directed. Note : (i) Three lenght of wire along with conduit will be measured as one Length complete all as specified and directed.

S & F MCB SP 6 to 32 Amps 240 volts 50 HZ having 10 KA complete all as specified and directed.

Supply and fix of sheet metal Enclosure with two pin and earth plug and socket complete with single pole MCB 20 Amps complete all as specified and directed.

S & F factory made sheet metal enclosure double door 415 volts ,AC TPN vertical distribution board painted with epoxy based powder coated suitable for mounting MCCB as incommer of rating upto 160 amps FP 16-36 KA and MCB SP/TP as outgoing and complete with copper Bus bars, 200A, 415V Netural links,blanking plates, double door 4 way, with and includingtop and bottom removable gland with IP 43 protection and electrically connecting up complete all as specified and directed.

S & F MCCB FP 4 pole 63 Amps volts 50 HZ having 16 KA complete all as specified and directed.

M & L for Earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6mm thick burried directly in ground earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate vertically to a depth of not less than 1.5 mtr below ground level connection to and including 32x6mm galvanised MS earth strip from earth plate to LT panel board including necessary GI bolts, nuts, check nuts, washers, thimble etc to the extend 7.5 mtr as earth lead by means of GI bolts & nuts etc, connecting to LT panel wlith provision of charcoal and salt all as per electrical plate No 3 of SSR Part-I including water arrangement with GI pipe 20mm dia (medium grade) excavation and earth work returning , filling, ramming and remove of soil to a distance not exc 50 mtr, make good to match with existing surface and testing on completion.Note:1.After completion if test results are nor satisfied, earthing should be redone by contractor without any extra cost. 2. Contractor should quote the rate deemed to be included with testing.

M & L for Earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6mm thick burried directly in ground earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate vertically to a depth of not less than 1.5 mtr below ground level connection to and including 4mm dia (8 SWG) GI earth wire from earth plate to main switch board including necessary GI bolts, nuts, check nuts, washers, thimble etc to the extend 7.5 mtr as earth lead by means of GI bolts & nuts etc, connecting to LT panel wlith provision of charcoal and salt all as per electrical plate No 3 of SSR Part-I including water arrangement with GI pipe 20mm dia (medium grade) excavation and earth work returning , filling, ramming and remove of soil to a distance not exc 50 mtr, make good to match with existing surface and testing on completion.Note:1.After completion if test results are nor satisfied, earthing should be redone by contractor without any extra cost. 2. Contractor should quote the rate deemed to be included with testing.

M/s Himanshu Tyagi (BID ID -3254191)

Peerzada And Sons (BID ID -3259397)

Mahadev Enterprises (BID ID -3259620)

M/s Mukesh Engineers (BID ID -3259458)

Parmatma Enterprises (BID ID -3253750)