Laying cement concrete pavement with drainage facilities to the Bungalow Street at Bahour

Amount

Code No: 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms , lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed ,widthin a lead of 50m -All kinds of soil.

Code No: 2.6.1 Earth work in excavation by mechanical means (Hydraulic excavation) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as10sqm on plan) including getting out and disposal of excavated earth, lead upto 50m and lift upto 1.5m - all kinds of soil

Code No: 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m

Code No: 4.1.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:3:6 (1 cement:3coarse sand : 6 graded stone aggregate 20mm nominal size)

Code No: 4.1.3 Providing and laying in position cement concrete of specified grade excluding thecost of centering and shuttering.- All workupto plinth level -1:2:4 (1 cement:2coarsesand : 4 graded stone aggregate 20mmnominal size)

Code No: 4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:5:10 (1 cement:5coarse sand : 10 graded stone aggregate 40mm nominal size)

Code No: 4.3.1 Centering and shuttering including strutting, propping etc. and removal of form for: Foundations , footings, bases for columns

Code No: 5.22.7 Reinforcement for R.C.C work including straightening , cutting , bending , placing in position and binding all complete - Thermo - Mechanically treated bars(ISI BRAND OF APPROVED MAKE) Fe - 415 or more

Code No: 7.23A.MO Providing and fixing premoulded bitumen joint filler, for expansion joints including the cost of sealing compound and priming coat - 12 mm wide

Code No: 10.25.2 Steel work welded in built up sections /framed work , including cutting ,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder,railings, brackets, gates and similar works

Code No: 13.16.1 6mm cement plaster of mix 1:3 (1 cement : 3 fine sand).

Code No: 16.68 Providing and laying 60mm thick factory made cement concrete interlocking paver blockof M-30 grade made by block making machine with strong vibratory compaction and of approved size and design /shape laid in required colour and pattern over and including 50mm thick compacted bed of course sand, filling the joints with coarse sand etc.fillng the joints with course sand etc.all complete

Code No: 18.9.31 Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings this included jointing of pipes & fittings with one step ASTM solvent cement, trenching refilling & testing of joints Complete (External work) - 20mm nominal outer dia pipes

Code No: 30.7 Supply of Quarry rubbish including stacking to department gauge for pre measurement and spreading required thickness

Code No: 31.161.1D Providing, laying and jointing UPVC metre pipes(Finolex / jain / Supreme / Truebore / Nandi) (0.6 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,UPVC specials such as bends,tees, threaded pieces, couplers, reducer, endcaps etc.,complete all as per IS and CPWD specification. - 75mm dia.

Code NO: 31.173.1B Providing and fixing in position UPVC moulded saddle set (Finolex/Jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc, complete - 75 x 20mm dia

P VETRIVEL

M. Chandirasekaran

V Madiajagane