CWE/FZR- /2022-23 Provn of Hard Standing, Security wall and misc work at Jyoti Stadium under GE (East) Ferozepur Cantt

Amount

Surface excavation n. exc 30cm depth and averaging 15cm deep getting out in soft/loose soil complete all as specified and as directed by Engineer-in-charge.

Removing of excavated materials (soil) n.exc 50m and deposited where directed at a level n exc 1.5m above the starting point complete all as specified and as directed by Engineer-in-charge.

Materials and labour for broken stone or boulder hard core of gauge n.exc, 63mm deposited spread and leveled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified and as directed by Engineer-in-charge.

Material and labour for Cement concrete type D-2, 1:4:8 in foundations, filling and mass-concrete complete all as specified and as directed by Engineer-in-charge.

Material and labour for Sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed by Engineer-in-charge.

Material and labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade with grey cement & no pigment complete all as specified and as directed by Engineer-in-charge.

Material and labour for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever equired complete all as specified and as directed by Engineer-in-charge.

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and getting out complete all as specified and as directed by Engineer-in-charge.

Material and labour Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling as mass concrete or in sub base of floors complete all as specified and as directed by Engineer-in-charge.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed by Engineer-in-charge.

Removing excavated material as soil exc. 50 m and n.exc 250 m, depositing where directed at a level n.exc. 1.5m above the starting point, complete all as specified and as directed by Engineer-in-charge.

Material and labur brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and as directed by Engineer-in-charge.

Material and labour for Rendering/plastering, 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even fair complete all as specified and as directed by Engineer-in-charge.

Material and labour preparation of new plastered or unplastered surfaces and applying two coats of cement based paint over a coat of chalk white primer on walls complete all as specified and as directed by Engineer-in-charge.

Material and labour preparation of new plastered applying Two or more coats of 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces.

Material and labour Plain cement concrete (1:2:4) type B-0 in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed by Engineer-in-charge.

Material and labour Framed work Fe 410 -W (GdeE- 250) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed by Engineer-in-charge.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

M/s Manoj Construction Co.

M/s Harkesh Kumar Bansal

Kissan contractor and engg works

VK ENTERPRISES

R.S.ENTERPRISES

B.L. Chaudhri and Co.

S.R. Kaura and Company

PREM KUMAR BANSAL

Dee Kay EnterPrises

S S BUILDERS