CERTAIN B/R REPAIRS TO JOINERY, FALSE CEILING, ROOFS, FLOORING, WALL PANELING, PLUMBING, TILING WK AND OTHER MISC WK IN OTM ACCN AT FATEHGARH

Amount

Demolition of brick work or stone /boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M & L Brick work using old size sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as specified and directed.

M & L Brick work using old size bricks (Except brick) straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as specified and directed.

M&L half brick thick walls built in CM 1:4 Sub Class B bricks straight or curved on plan to any radius complete all as specified and directed.

Dismantling of floor hearth or wall tiling any type including cement mortar bedding complete all as specified and directed.

M & L for chequered cement concrete tiles of size 25cm x 25cm x 22mm thick set & jointed in neat cement slurry with grey cement and pigment over & including 15mm thick screed bed or bedding layer of cement mortar (1:6) for laying of chequered tile complete all as specified and directed.

S&F glazed coloured ceramic tiles of sizes 350x 250x 7 mm/ 450X 350X 7mm thick on vertical surface over & including 10mm thick rendering in CM 1:4 complete all as specified and directed.

S&F Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceedifng 0.11 sqm but not exceeding 0.18 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

S & F Vitrified Ceramic Tiles 10 mm thick (Square/rectangular) light shade polished area of each tiles not exceeding 0.36 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over & including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for machine cut kota stone slab as in flooring of size exc. 500 x500mmx18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over & including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

Taking down cement plaster of any description built in cement mortar of any description complete all as specified and directed.

M&L 15mm thick cement plastering in cm 1:6 on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement all as specified and directed

All as per item No 12 above but in CM 1: 4

M&L 5mm thick cement plastering in cm 1:3 on on ceiling surfaces even and smooth without using extra cement complete all as specified and directed

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) size exc 1.5 sqm each not exc 4.00 sqm each. complete all as specified and directed.

Taking down shutter of any description size exc 1.00 Sqm each but n.exc 2.00 Sqm complete all as specified and directed.

S&F Steel windows with side hung shutters including box type hinges with steel handle complete with glazing bars,dovetailed or welded complete all as specified and directed.

S&F Steel windows with side hung shutters including box type hinges with steel handle, complete without glazing bars,dovetailed or welded complete all as specified and directed.

S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed

M & L for framed work such as guard bars made of square bars fixed to flat iron or to box type window frame confirming to Fe-290 gde E-165 complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S Frame shall be covered with heat moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock and bottom rail on either side & as gap insert for tip rail & bottorm rails; Panelling of plain colour PVC sheet to be fitted in the MS frame weloded/seated to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement. suppling and fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F MS work as in Framed work as in chowkhats of doors or gates of angle or other section with gusset plates, rails, braces, etc.,conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F 35 mm thick Plain, framed,panelled shutters(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F 35 mm thick 2nd class hardwood as in Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section of 125mm size etc complete all as specified and directed.

S&F Aluminium handles, cast type anodised of size 125mm etc complete all as specified and directed.

S & F mild steel sliding door bolt 300mm long clip type, stove enamelled black with bright bolt not less than 16mm dia complete all as specified and directed.

S & F mild steel barrel tower bolt 200mm long, stove enameled black with bright bolts complete all as specified and directed.

S & F mild steel pressed handle oval type stove enameled black of size 150mm complete all as specified and directed.

S&F mild steel butt hinges cold rolled of size 100mm medium weight complete all as specified and directed.

S&F butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed of size 100mm type E-22 complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames glazed with putty of fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

S & F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, wooden beads to steel windows/wooden doors complete all as specified and directed.

S & F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples,rivets,wooden beads to steel windows/wodden doors/windows complete all as specified and directed.

S&F MS work as in Framed work as in framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 410-W(Gde E- 250) quality A complete all as specified and directed.

S&F for Purpose made butt hinges,sliding bolt,handle conforming to Fe-290 Gde-E-165 suitable for fixing to stone concrete door and window frames complete all as specified and directed

S & F in repair curtain rod PVC coated mild steel rod of 20 mm bore fixing with fancy type brackets, stops, rollers, side dooms etc complete all as specified and directed.

Taking down Aluminium door/ window with shutter complete all as specified and directed.

S & F Anodised aluminium frame work for door made out of approved section with & including providing necessary joining cleats,glazing clips,rubber packing,anodised aluminium snap beading screws, anodised aluminium fittings such as hinges type 150 mm long (3 no.) suitable handle(2 No.), 150 mm long tower bolt (02 Nos) (all fittings per leaf) complete all as specified.Note:- Fabrication work shall be got done by approved fabricator or manufacturer of aluminium complete all as specified and directed.

S & F Anodised aluminium frame work for window/ventilator made out of approved section incl providing necessary joining cleats,glazing clips,rubber packing,anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150 mm long ( 1 No.) hinges type B-21 100 mm long (2 no.) suitable handle(1 No.), 100mm long tower bolt (02 Nos) (all fittings per leaf) complete all as specified and directed. Note:- Fabrication work shall be got done by approved fabricator or manufacturer of aluminium.

S&F sheet glass 5.5mm thick ordinary quality exc 0.5 sqm each all as specified and directed by Engineer-in-Charge.

S&F Door closer hydraulically regulated,designation No. 2,aluminium die cast body universal type complete all as specified and directed.

S&F in repair Door closer hydraulically regulated,designation No. 2,aluminium die cast body universal type complete all as specified and directed.

M&L preparing surfaces new of wood and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L Preparing new surfaces of steel and applying two coats of synthetic enamel paint, complete all as specified and as directed.

All as per item No.48 above , but over a coat of red oxide zinc chrome primer

S&F in renewal vitreous china water closet squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with `P’ or `S’ trap for 100mm pipe (excluding flush pipe and flushing cistern) complete all as specified and directed.

S&F in repair Vitreous China Wash down water closet EWC with plastic seat cover,hand shower including all fittings complete all as specified and as directed .

S&F in renewal for PVC low level flushing cistern of 10ltr capacity, with syphonic, action PVC float valve, brackets and 32mm bore PVC flush pipe etc incl PVC connection 450mm long complete all as specified and directed.

S&F for rotational moulded polyethylene water storage tank vertical with closed top of 500 ltrs capacity and fixed in position all as specified in SSR Part-I including disconnecting existing tanks complete all as specified and directed.

All as per item No.54 above but 1000 Ltr Capacity

S & F in repair Vitreous China Wash hand basin white flat back of size 550 x 400 mm including brackets, waste coupling 32mm dia and waste pipe complete all as specified and directed.

M & L three coats of white wash on new plastered wall surfaces including preparation complete all as specified and directed.

M & L for two coats of Cement based paint over a coat of alkali resistant primer on new plastered wall surfaces including preparation complete all as specified and directed.

M & L for two coats of Oil bound distemper on new plastered wall surface over a coat of alkali resistant primer including preparation complete all as specified and directed.

M & L threes coat of white wash on new plastered Ceiling surfaces including preparation complete all as specified and directed.

Dismantaling of asbestos cement (Corrugated, semi corrugated etc) sheeting in roof covering complete all as specified and directed.

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roof, fixed with L type or J type or cranked hook bolt complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified and directed.

S&F False Ceiling Horizontal level regular edge grid of size 600 x600 mm from work using hot dip sections and fixing tiles vinyl laminated MPL gypsum panels of size 595x595x6 to 8mm thick after lamination, suspended the grid with grid hangers to Roof Truss / RCC Slab all as per manufactured instruction complete all as specified and directed.

S&F 5 to 8mm thick PVC hollow wall panelling fixed to wall with L or U shaped beading at ends fixed with screws complete all as specified and directed.

Demolition of PCC in Ground floors/PCC Path/Plinth Protection and paving n.exc 15cm thickness (below or above ground level) etc complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping bands and benching of manholes etc including slightly rounded or chamfered angles including necessary form work complete all as specified and directed.

M&L PCC type C-2 (1:3:6) (20mm graded stone aggregate), 50mm thick as in Plinth Protection finished even and smooth etc complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block vibrator finish any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment , over & including 20 mm thick sand filling complete all as specified and directed.

Demolition and breaking up drain pipes 100 mm dia(Salt glazed ware, AC or reinforced concrete) set in cement mortar (1:1) complete all as specified and directed.

S&F 110 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints fixed to walls including fixing with clamps complete all as specified and directed.

S&F 110 mm bore PVC(SWR) bend any radius complete all as specified and directed.

S&F in repair clamps for CI/PVC pipe made out of 25x 5 mm flat iron fixed to wall by means of stainless steel fastener of size 10mmx72mm(2 No.s for each clamp) complete all as specified and directed complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

S&F block board, grade 2 quality, interior grade, commercial type 18/19 mm thick, decorative type, one face,incl nut bolt 3mm dia 5 cm long fixed to angle or other section frame complete all as specified and directed.

S&F for rectangular faced beading to block boards incl glue and nails complete all as specified and directed.

Taking down shutters of any description n exc 1 sq. m each complete all as specified and directed.

S&F in renewal handle 125mm long of cast iron / zinc CP of godrej pattern with new nut and bolt complete all as specified and directed.

S&F in renewal locks 50mm,6 lever of brass with new nut and bolts with including triple keys godrej pattern complete all as specified and directed.

S&F in renewal suitable sized anchoring rod of dia. 12mm and fixing arrangement for built-in cupboard shutter complete all as specified and directed.

Adjustment of existing shelves in the built-in cupboard shutter by providing new clamps complete all as specified and directed.

S&F in renewal new butt hinges 65 to 75 mm long made out of stainless steel complete all as specified and directed by Engineer-in-Charge.

S&F built in steel cupboard shutters of pressed steel 1.00mm thick godrej pattern including locking arrangements,hinges fixed to existing cupboard shutter chowkhat with suitable arrangement including two coats of spray paint over a coat of red oxide primer on steel surfaces after taking out of old existing cupboard frame with shutters complete all as specified and directed.

M&L for one coat of synthetic enamel paint by means of mechanical sprayer on old decorated steel surfaces complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde- E- 250) quality- A including fixing to wall in cement concrete 1:2:4 using 12.5 mm graded stone aggregate complete all as specified and directed.

Refixing Rolled mild steel in Joist, channel, angle, or tee sections,obtained from item No.85 here in before fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) incl fixing to wall in cement concrete 1:2:4 using 12.5 mm graded stone aggregate complete all as specified and directed.

Dismantling framed work timber scantlings 40sq. cm and over in section, in any position complete all as specified and directed.

M & L for 2nd class hard wood scantling as in frame work complete all as specified and directed.

M/S S P CONSTRUCTION

M/S WASEEM KHAN CONTRACTOR

M/S SRI JAGDAMBE TRADERS

M/s Moti Babu Agarwal

M/S shree traders