To Providing New street light through TANGEDCO at Sembaruthi Nagar, Daicy Nagar, Sakthi Nagar, Thentral Nagar and Rose Garden ward No 01.

Supply and delivery of 20W LED system made up of pressure die cast aluminium housing with heat resistant toughened glass cover confirming to IP65, Separate compartment for LEDs & electronic driver with CCT of 5700K, PF > 0.9, System efficacy > 85. Operating Voltage range of 120V to 270V with surge arrestor minimum of 1 KV. Driver Current not than 700mA. THD < 10% Lumens package not less 105 lm /W for LED Source. Test Certificate from NABL ( National Accredited Board for Testing & Calibration laboratory) for LM79 Report. In house Testing facility to be available for the same, Lamp life not less than 50,000 Hours etc., Street light fitting with atleast 300mm length of 3 core 1sq.mm copper cable and Male connector IP66 rated 3pin connector shall be complitable with the female connector used in the SPD and Bi-metal connector and shall be specified in this document complete as per standard Specification (Need to get a DMA Approved 3rd party Testing Certificate)

Supply and delivery of 40W LED system made up of pressure die cast aluminium housing with heat resistant toughened glass cover confirming to IP65, Separate compartment for LEDs & electronic driver with CCT of 5700K, PF > 0.9, System efficacy > 85. Operating Voltage range of 120V to 270V with surge arrestor minimum of 1 KV. Driver Current not than 700mA. THD < 10% Lumens package not less 105 lm /W for LED Source. Test Certificate from NABL ( National Accredited Board for Testing & Calibration laboratory) for LM79 Report. In house Testing facility to be available for the same, Lamp life not less than 50,000 Hours etc., Street light fitting with atleast 300mm length of 3 core 1sq.mm copper cable and Male connector IP66 rated 3pin connector shall be complitable with the female connector used in the SPD and Bi-metal connector and shall be specified in this document complete as per standard Specification (Need to get a DMA Approved 3rd party Testing Certificate)

Supply and Delivery of 1.2 meter Length , 32mm dia GI Bracket suitable for the LED fittings for 20W with 2 sets of GI clamps and necessary bolts and nuts

Labour charges for fixing of 20W LED fittings for existing and new lights

Supply, delivery and installation of 3 Core 1.0 Sq.mm copper cable with length of 2 meters with 2 Nos of bimetal hook connector in one end and IP 66 Female connector in the other end suitable to connect with Male connector in the LED fittings as per technical specification ( New lights and Existing lights)

ADD GST 18%