Procurement of various Hostel Furniture (Bed, Table, Chair etc.) for Redevelopment of SCB MCH Cuttack, Phase-I Residential Package-I

Supply & Installation of Single Bed with Storage Bed Size: 2050mm Length, 955mm Width and 430mm height, Side Thickness 20mm. Headboard: 955mm width & 940 mm Height, thickness 38mm Foot-board: 955mm width & 470 mm Height, thickness 38mm Storage: Single Horizontal partition, Top open box storage length= 1990mm (995 x 2), Box storage depth= 320 mm, 3 Hinges and 2 handles. Bed rest and floor rest will have 18mm ply with laminates in both sides and every part of the bed. The lower base and upper base of the bed will have 12 mm thick BWP plywood with laminate on top surface. 18 mm thick BWP plywood with 15 years warranty with all external visible surface factory pasted laminate with 1.5mm thick and inside surface 0.70 mm thick white laminate factory pasted. 2mm PVC edge banding on headboard and footboard with corner rounding in the exposed edges with through feed edge banding machine with help of hot melt glue above 200 degree Celsius. 0.8mm edgebanding on all other surface of Plywood with edge corner rounding through feed edge banding machine with help of hot melt glue above 200 degree Celsius. Mosquito net stand ¾”M.S pipe of 2mm thickness. Hardware: Heitich/ Yale / Doorset/ Hafele/ ebco. Plywood BWP: ARCHIDPLY/ CENTURY PLY/GREEN LAM. Laminates: Greenlam /Century/ Archidlam. The plywood and laminate shall be of same make.Fixing shall be made with bed jointers of heavy duty ISI marked to make the bed modular. There shall be Polypropylene buffers fitted for making the floor scratch resistant. The fittings will be KD Fittings format like minifix and barrelnut. The side joint with headboard and foorboard must have 75mm L Corner.

Mattress Dimension - 1800mm X 900mm, Number of Layers-Two Layers, Thickness of Core Layer} - 50mm, Thickness of Core Layer2 - 50mm, Material of Core Layerl: PU Foam, Material of Core Layer2: PU Foam, Quilting : Both side Quilting (Double Sided), Thickness of Quilting:8mm, Fabric Composition: Polyester, Construction: Woven, Fabric Mass :80grn/m2, Core Layer I Density : 28 kg/m3, Core Layer 2 Density :28Kg/m3 . Compression Set for PU Foam : 10%,Durability test for Complete mattress: Loss of height not more than 13mm. Resistance to Ageing for PU Foam as per IS 7888 latest: Shall meet the requirement of IS 7933 Latest. Durability Test for PU Foam as per IS 7888 latest: Shall meet the requirement of IS 7933 Latest. Durability Test for Complete Mattress: Loss of height not more than 13mm as per ASTM 1566.Warranty 1 year. Test report to be furnished to buyer on demand , if claimed to be available. Approved Makes: Sleepwell/ Duroflex/Kurl-On/ Godrej/ Flo Mattress

Pillow Conforming to Standrads: DGQA Prov Specn No. S/1706/Synthetic Pillow/ TC-6 Length: 700mm, Width: 400mm, Height of Pillow At Centre 170mm Body Fabric: Cloth plain weave Polyester cotton (67:33) white Ends per cm: 40 Picks per cm: 30 Body fabric mass (g/sqm): 110 Filling Material: Hollow siliconised polyester fibre of 7 Denier Mass of filling material (g): 625 Total mass of synthetic pillow (g): 715 Reinforcing/ Piping: Shroud laid cotton line of 2 mm dia Availability of Test Report from designated AHSP,NABL/ ILAC accredited or Central Government Lab to prove conformity of products to the specification

Supply & Installation of Study Desk Length= 1200 mm, Width= 600 mm, Height= 750 mm One Drawer and one Storage with adjustable Self, Modesty panel on the back side with size of 1150 mm x 375mm and a Foot Rest in the Bottom size 820mm x 100 mm. Drawer Facia 420mm x 150mm with 450mm Telescopic channel & Storage Facia: 420mm x 460mm Magnetic close auto hinges chrome coated and locking arrangements, Hole with Grommet for cable management. Top of the Table will be 38 mm thick, Side of the Table will be 25 mm thick and Drawer Botton will be 6mm thick. All the other parts of the table will be made from 18 mm PLY. 18 mm thick BWP plywood with 15 years warranty with all external visible surface factory pasted laminate with 1.5mm thick and inside surface 0.70 mm thick white laminate factory pasted. 2mm PVC edge banding on top surafce with corner rounding in the exposed edges with through feed edge banding machine with help of hot melt glue above 200 degree Celsius. 0.8mm edgebanding on all other surface of Plywood with edge corner rounding through feed edge banding machine with help of hot melt glue above 200 degree Celsius. Hardware: Heitich/ Yale / Doorset/ Hafele/ ebco. Plywood BWP: ARCHIDPLY/ CENTURY PLY/GREEN LAM. Laminates: Greenlam /Century/ Archidlam. The plywood and laminate shall be of same make. There shall be Polypropylene buffers fitted for making the floor scratch resistant. The fittings will be KD Fittings format like minifix and barrelnut.

Supply & Installation of 4 Leg CHAIR Supply and installation of item size SEAT ASSEMBLY: The seat assembly should be made up of 1.2 ±0.lcm. thick hot-pressed plywood , upholstered with fabric upholstery covers and moulded Polyurethane foam. SEAT SIZE: 47 .0 cm. (W) x 48.0 cm. (.D) BACK ASSEMBLY: The back asembly. should be made of powder coated (OFT 40-60 microns) tubular frame of O 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn. BACK SIZE : 46.5 cm. (W) x 60.5cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. TUBULAR FRAME: The powder coated (OFT 40-60.microns) tubular frame should be cantilever type & made of (62.54 ±0.03cm. x 0.2 ±0.016cm thick M.S.E.R.W. Tube. The Chair seat should be provided in 2 Colors (Red & Blue) Approved Makes: Godrej/ Geeken/ Featherlite