CE CHZ/PAT/T-10/2020-21 PROVN OF OTM ACCN NO-01 AT PATIALA

Amount

Schedule 'A'Section-I (Building/Structure Works)

Total amount of Schedule 'A' Section-I (Building/Structure Works)

Schedule 'A'Section-II (Site Clearance,Developement And Earth Works)

Total amount of Schedule 'A' Section-II (Site Clearance ,Developement and Earth Works)

Schedule 'A'Section-III (Internal Water Supply Works)

Total amount of Schedule 'A' Section-III (Internal Water Supply Works)

Schedule 'A'Section-IV (Internal Electrification Works)

Total amount of Schedule 'A' Section-IV (Internal Electrification Works)

Schedule 'A'Section-V (Road, Path and Culvert Works)

Total amount of Schedule 'A' Section-V (Road, Path and Culvert Works)

Schedule 'A'Section-VI (Area Drainage Works)

Total amount of Schedule 'A' Section-VI (Area Drainage Works)

Schedule 'A'Section-VII(Security Wall,Fencing & Gates Works)

Total amount of Schedule 'A' Section-VII (Security Wall,Fencing & Gates Works))

Schedule 'A'Section-VIII (Sewage Disposal Works)

Total amount of Schedule 'A' Section-VIII (Sewage Disposal Works)

Schedule 'A'Section-IX (Solar Hot Water Supply Works)

Total amount of Schedule 'A' Section-IX (Solar Hot Water Supply Works)

Schedule 'A'Section-X (Summar Appliances Works)

Total amount of Schedule 'A' Section-X (Summar Appliances Works)

Schedule 'A'Section-XI ( Lightning Protection Works)

Total amount of Schedule 'A' Section-XI (Lightning Protection Works)

Schedule 'A'Section-XII (External Electric Supply Works)

Total amount of Schedule 'A' Section-XII (External Electric Supply Works)

Schedule 'A'Section-XIII (External Water Supply Works)

Total amount of Schedule 'A' Section-XIII (External Water Supply Works)

Schedule 'A'Section-XIV (Grounds, Hardstanding And Apron For Open Garage Works)

Total amount of Schedule 'A' Section-XIV (External Water Supply Works)

Schedule 'A'Section-XV (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

INTERNAL ELECTRIFICATION

Item No. 01 : Point wiring (using approved colour coding as per IS) with 1100 volts grade, stranded copper conductor 1.5 Sqmm (nominal crossectional area), FRLSH, PVC insulated and unsheathed cable IS 694 marked TEC and FIA approved in and including PVC concealed conduit(thickness 2 mm and 25 mm dia) and its fittings duly ISI marked with all accessories such as bends, reducers, spacers, saddles,junction boxes,including modular PVC box,modular white cover plate/PVC gang box and inner plate with frame of suitable size for mounting modular switches/sockets,fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLSH 1100 volts, copper conductor, insulated, unsheathed,stranded (Green colour) connected to common earth dolly confirming to IS-694, complete all as specified and directed by Engineer-in-Charge for the following:-

Item No. 01(a) One Light/Fan/Bell point controlled by one switch 6 Amp .

Item No. 01(b) Socket outlet, three pin, 6 Amp, on independent board.

Item No. 01(c). Socket outlet, three pin, 6 Amp, on the same board wth other switches.

Item No. 01 (d). One light point controlled by 2 two way switches 6 Amps.

ITEM NO. 02 : Concealed Point wiring with 2.50 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid concealed PVC conduit of 2mm thick, 25mm dia with all fittings and accessories including sunk mild steel terminal boxes with 3mm thick plastic laminated sheet top cover complete including FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 2.50 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for one 16 Amp socket outlet on independent board, complete all as specified and directed by Engineer-in-Charge.

Item No. 03 : Modular blank plate,1 module, ISI marked,suitable for modular switch boards, complete all as specified and directed by Engineer-in-Charge.

Item No. 04 : Modular metal flush box with modular cover plate,12 module, ISI marked, complete all as specified and directed.

Item No. 05 : Modular metal flush box with modular cover plate,8 module, ISI marked, complete all as specified and directed.

ITEM NO. 06 : Submain wiring with 4 single core of 16 Sqmm,1100 Volts, FRLSH PVC insulated and unsheathed cable with stranded copper conductor of (four) runs of 16 Sqmm (nominal crossectional area) 1100 Volts drawing in & including heavy grade PVC Concealed conduit 2mm thick, 25mm dia, ISI marked with all accessories and one additional continuous earth wire of size 1x10 Sqmm nominal crossectional area 1100 Volts FRLSH PVC insulated unseathed copper conductor cable as earth continuity conductor but green in colour for earth DBs and boxes with proper thimbles, complete all as specified and directed. (NOTE:- 4(four) runs of 16 sqmm copper conductor cable ,1 (one) run of 10 sqmm copper conductor earth wire & one run of PVC conduit shall be measured as one length/unit)

ITEM NO. 07 : Submain wiring with 2 single core of 6 Sqmm (nominal crossectional area), 1100 Volts, FRLSH PVC insulated and unsheathed cable with stranded copper conductor drawing in & including heavy grade PVC concealed conduit 2 mm thick, 25 mm dia, ISI marked with all accessories and one additional continuous earth wire of size 1x6 Sqmm (nominal crossectional area) FRLSH PVC insulated unsheathed 1100 Volt copper conductor but green in colour for earth DBs and boxes with proper thimbles,complete all as specified and directed. (NOTE:- 2 (Two) runs of 6 Sqmm, copper conductor cable ,1 run of 6 Sqmm, Earth copper conductor earth wire & one run of PVC conduit shall be measured as one length/unit)

ITEM NO.08 : Submain wiring with 2 single core of 4 Sqmm,1100 Volts,FRLSH PVC insulated and unsheathed cable with stranded copper conductor drawing in & including heavy grade PVC concealed conduit 2 mm thick, 25mm dia,ISI marked with all accessories and one additional continuous earth wire of size 1x4 Sqmm (nominal crossectional area) FRLSH PVC insulated unsheathed 1100 Volt copper conductor but green in colour for earth DBs and boxes with proper thimbles,complete all as specified and directed. (NOTE :- 2 (Two) runs of cable ,1 (one) run of earth wire & one run of PVC conduit shall be measured as one length/unit)

ITEM NO. 09 : Sheet metal enclosure,loadline vertical DB, VTPN 415 volts load line type, 4 way, IP-43 protection, epoxy powder coated, double door, suitable for MCCB as incomer with and including common bus bar capacity 200 Amp and out going MCB's, grouted flush to wall in cement mortar (1:3) to match the existing surface, making electrical connections, complete all as specified and directed.

ITEM NO 10: Sheet metal enclosure MCB DB, SPN, 240 volts, 12 way, epoxy powder coated, double door type, including common bus bar of capacity 200 Amps of grouted flush to wall in cement mortar (1:3) to match the existing surface, making electrical connections, complete all as specified and directed.

ITEM NO 11: Sheet metal enclosure MCB DB, SPN, 240 volts, 8 way, epoxy powder coated, double door type with and including common bus bar Capacity 200 Amps, grouted flush to wall in cement mortar (1:3) to match the existing surface, making electrical connections, complete all as specified and directed.

ITEM NO 12: Sheet metal enclosure MCB DB, SPN, 240 volts, 4 way, epoxy powder coated, double door type including common bus bar of Capacity 200 Amps, grouted flush to wall in cement mortar (1:3) to match the existing surface, making electrical connections, complete all as specified and directed.

ITEM NO 13: Sheet metal enclosure MCB DB, SPN, 240 volts, 2 way, epoxy powder coated, single door type, grouted flush to wall in cement mortar (1:3)grouted flush to wall in cement mortar (1:3), making electrical connections, complete all as specified and directed.

ITEM NO 14: Sheet metal enclosure, epoxy powder coated, with a two pin and earth plug and socket with and including one single pole MCB 16 to 20 Amp, 240 Volts ,making electrical connections, complete all as specified and directed.

ITEM NO. 15 : MCB SP, 230 Volt , 50 Hzs, 6 to 32 A, 10 KA , "B" curve, complete all as specified and directed.

ITEM NO. 16 : MCB SPN, 230 Volt , 50 Hzs, 6 A, 10 KA , "B" curve, complete all as specified and directed.

ITEM No 17 : MCB SPN 'B' Curve as incommer, 230 volt , 50 Hzs, 16 Amps, 10 KA complete all as specified and directed by Engineer-in-Charge.

ITEM No 18 : MCB SPN 'B' Curve as incommer, 230 volt , 50 Hzs, 20 Amps, 10 KA complete all as specified and directed by Engineer-in-Charge.

ITEM No 19 : MCB SPN 'B' Curve as incommer, 230 volt , 50 Hzs, 25 Amps, 10 KA complete all as specified and directed by Engineer-in-Charge.

ITEM No 20 : MCB SPN 'B' Curve as incommer, 230 volt , 50 Hzs, 32 Amps, 10 KA complete all as specified and directed by Engineer-in-Charge.

ITEM No 21 : MCB SPN 'B' Curve as incommer, 230 volt , 50 Hzs, 40 Amps, 10 KA complete all as specified and directed by Engineer-in-Charge.

ITEM No 22 : MCB 4 pole, 'B' Curve as incommer, 230 volt , 50 Hzs, 63 Amps, 10 KA complete all as specified and directed by Engineer-in-Charge.

ITEM No 23 : MCCB 4 pole, 100 Amps, 415 volt , rated short circuit breaking capacity Icu 25 KA, Ics 100% Icu adjustable thermal magnetic trip with over load variation 80-100% In and short circuit variation 6-10 In, complete all as specified and directed by Engineer-in-Charge.

ITEM No 24 : MCCB 4 pole, 63 Amps, 415 volt , rated short circuit breaking capacity Icu 25 KA, Ics 100% Icu adjustable thermal magnetic trip with over load variation 80-100% In and short circuit variation 6-10 In, complete all as specified and directed by Engineer-in-Charge.

ITEM NO. 25 : Ceiling fan (5 star rated) 230 V, 50 Hz, 1200 mm sweep confirming to IS374-2019, with all standard accessories as per manufacturer's recommendations ,making connections with 3 core copper cable of size not less than 1.5mm sqmm from ceiling rose,complete all as specified and directed. Make: Havells ES-505/ Bajaj / USHA or equivalent make as mentioned in Appendix 'B'.

ITEM NO. 26 : RJ-11 telephone socket with transparent shutter 1 module alongwith flush metal box 1 module and front cover plate 1 module,complete all as specified and directed.

ITEM NO. 27 : TV socket with transparent shutter 1 module alongwith flush metal box 1 module and front cover plate 1 module,complete all as specified and directed.

ITEM No 28 : Environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head 1X10 W LED edge-lit led luminaire comprising of high brightness leds of capacity10 Watt ,complete all as specified and as directed by Engineer-in-Charge. Make: Polycab CAT-PCGLBHDLX10/ Bajaj/Crompton greaves /Havells/Philips or equivalent makes as mentioned in Appendix 'B'.

ITEM No 29 : New generation energy saving and environmental friendly long life LED building security light 1x25 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable bracket with 32mm bore light grade GI pipe 1.2 mtr in length bent to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twincore from ceiling rose to light fittings, complete all as specified and as directed. Make: / Bajaj / Havells / Philips or equivalent makes as mentioned in Appendix 'B'.

ITEM No 30 : Exhaust fans matallic body AC single phase 230/ 240 V of size 225/230 mm sweep with self closing louvers including suitably embedded in wall including making hole/opening and making connection with twisted three core PVC insulated unsheathed flexible chord 0.75 Sqmm copper conductor from ceiling rose to exhaust fan, complete all as specified and directed by Engineer-in-Charge. Make: Havells / Bajaj / USHA or equivalent makes as mentioned in Appendix 'B'.

ITEM No 31 : Exhaust fans metallic body, heavy duty, AC single phase 240 V of size 300 mm sweep, 900 RPM with self closing louvers including suitably embedded in wall including making hole/ opening and making connection with twisted three core PVC insulated unsheathed flexible chord 0.75 Sqmm copper conductor from ceiling rose to exhaust fan, complete all as specified and directed by Engineer-in-Charge. Make: Havells / Bajaj / USHA or equivalent makes as mentioned in Appendix 'B'.

ITEM No 32 : Exhaust fans metallic body, heavy duty, AC single phase 240 V of size 450 mm sweep, 900 RPM with self closing louvers including suitably embedded in wall including making hole/opening and making connection with twisted three core PVC insulated unsheathed flexible chord 0.75 Sqmm copper conductor from ceiling rose to exhaust fan, complete all as specified and directed by Engineer-in-Charge. Make: Havells / Bajaj / USHA or equivalent makes as mentioned in Appendix 'B'.

ITEM NO. 33 : Energy saving LED light fitting, 1 x 20 watt, 230 volts, decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack. with electronic driver and with best quality diffuser high lumen output, 2.5 KV voltage surge protection, PF 0.98, THD < 10% suitable for surface/pendant mounting complete with all accessories including and connecting of with twin core of PVC insulated 0.75 Sqmm copper conductor cable , complete all as specified and directed by Engineer-in-Charge. Make Havells , Cat Part No. LUMILINEPLUSBS20W/Bajaj/Cromption Greaves/HPL or equivalent makes as mentioned in Appendix 'B'.

Item No. 34 : Energy saving Receess mounting 2 x 2 luminaires light fitting 24 W, complete with driver suitable for ceiling surface complete all as specified and directed by Engineer-in-Charge. Make : Bajaj/Cromption/Havells or equivalent makes as mentioned in Appendix 'B'.

ITEM No 35 : LED mirror light with Linear & compact 9W mirror light with decorative grey end caps, polycarbonate body and ribbed opal diffuser of capacity 9 watt complete all as specified and directed. Make : Bajaj/Cromption/Havells or equivalent makes as mentioned in Appendix 'B'.

Item No. 36 : LED Lamp LED new Adore 9W LED retrofit lamp B-22 9 watt,complete all as specified and directed.Make : Bajaj/Cromption/Havells/Polycab or equivalent makes as mentioned in Appendix 'B'.

Item No 37 : Energy saving skylux surfacel mounting LED 4X1 luminaire light fitting, 1 x 36 watt, 230 volts, with electronic driver and with best quality diffuser high lumen output, 2.5 KV voltage surge protection, PF 0.98, THD < 10% complete with all accessories including and connecting of with twin core of PVC insulated 0.75 Sqmm copper conductor cable, complete all as specified and directed Make Bajaj Model BZSSLL 36W/Wipro/ Philips/Osram or equivalent makes as mentioned in Appendix 'B'.

Item No 38 : Energy saving LED porch light fitting, 1 x 18 watt, 230 volts, decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack. with electronic driver and with best quality diffuser high lumen output, 2.5 KV voltage surge protection, PF 0.98, THD < 10% suitable for surface/pendant mounting complete with all accessories including and connecting of with twin core of PVC insulated 0.75 Sqmm copper conductor cable, complete all as specified and directed. Make Bajaj /Crompton greaves/ Philips or equivalent makes as mentioned in Appendix 'B'.

ITEM No 39 : Earthing complete with and including galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm surrounded by a mixture of charcoal and salt in alternate layers burried directly in ground vertically in a pit of depth not less than 2.25 m deep below ground level with top edge of earth plate at a depth of not less than 1.5 m below ground level, connected with and including galvanised iron or steel earth wire, 4mm dia (No. 8 SWG) by means bolts, nuts, check nuts and washers made out of galvanised iron, 15 mm bore (medium grade) GI pipe for protection of earthing lead, 20 mm bore (medium grade) GI pipe for watering with funnel, wire mesh and including necessary excavation and earth work, PCC 1:2:4 type B-1 pit and 50 mm thick RCC 1:1.5:3 type A-1 reinforced with XPM (weight not less than 3 kg/sq m) pit cover, C.I frame, charcoal and comman salt filling in alternate layers, complete all as shown and specified in electrical plate No. 3 of SSR Part-I (2009). NOTE : The unit rate includes for protecton pipe 15mm and GI earth strip 4mm from top of earth plate upto 7.50 metre above ground level. (Qty= 17 No for Internal Elect Supply + 02 for Hot Water Supply + 8 No for Ext Elect Supply)

Road, Path and Culvert Works

ITEM NO 40 : 80mm thick machine pressed precast concrete (M-40 grade) interlocking paver block,manufactured in an automatic plant working on vibration and simultaneous hydraulic compression from top (with grey cement and pigment) any shape and size conforming to IS 15658-2006 laid over sand cushioning & filling the joints with sand after laying, complete all as specified and as directed. NOTE :- Cost of Sand will be measured and paid seperately .

ITEM NO 41 : 60mm thick machine pressed precast concrete (M-35 grade) interlocking paver block,manufactured in an automatic plant working on vibration and simultaneous hydraulic compression from top (with grey cement and pigment) any shape and size conforming to IS 15658-2006 laid over sand cushioning & filling the joints with sand after laying, complete all as specified and as directed. NOTE :- Cost of Sand will be measured and paid seperately .

Summar Appliances Works

ITEM NO 42 : Voltage stabilizer for automatic operation, single phase naturally air cooled, indoor type and designed for input variation between 170 V to 250 V with output voltage stablilized at 230 V with accuracy of 2.5% and of capacity 1 KVA , complete all as specified and as directed.

ITEM NO 43 : Refregerators, electric driven (Single phase), BEE 5 Star rating, capacity 200 Litres frost free, complete all as specified and as directed.

ITEM NO 44 : Heay duty pvc stands for placing / staging of water coolers and refrigerators of adequate size , complete all as specified and as directed.

ITEM NO 45 : Supply and Installation of Desert cooler with outer body made of PGI (Plain Galvanised Iron) sheet not less than 1.20 mm thickness for fixed part, thickness of PGI sheet for shutter not less than 0.80 mm thick, front grill made of PGI sheet with minimum weight 2.80 kgs, overall outer size not less than 66 cm X 66 cm X 99 cm (height), electric driven copper wounded fan motor having nominal air flow capacity 4000 Cum per hour and submersible pump for required flow of water (single phase), complete all as specified and as directed.

Solar Hot Water Supply Works

ITEM NO.47 : Submain wiring with 4 single core of 4 Sqmm,FRLSH PVC insulated and unsheathed cable with stranded copper conductor drawing in & including heavy grade PVC concealed conduit 2mm thick, 32 mm dia, ISI marked dia with all accessories and one additional continuous earth wire 1 run of wire of 1x4 Sq mm (Nominal Crossectional Area) FRLSH PVC insulated unsheathed 1100 Volts copper conductor but green in colour for earth DBs and boxes with proper thimbles,complete all as specified and directed. (NOTE :-Two rurns of cable ,1 run of earth wire & one run of PVC conduit will be measured as one length/unit)

ITEM NO.48: Sheet metal enclosure,loadline vertical DB, TPN 415 volts, 4 way,epoxy powder coated,double door type, IP-43 protection suitable for MCCB as incomer with and including common bus bar of Capacity 200 Amps and out going MCB's, grouted flush to wall in cement mortar (1:3), making electrical connections, complete all as specified and directed.Make:-Havells,CAT part No-DHDLVSRWGOFO04 or equivalent in Hager/Legrand/Schneider.

ITEM No 49 : MCB, TPN , 415 volts ,40 Amps, 'C' curve 10 KA , complete all as specified and directed by Engineer-in-Charge.Make:-Havells/Hager/Legrand.

Lightning Protection

Item No 50 :- Earthing with galvanized steel earth plate electrode 600mm x 600mm x 6mm thick, burried directly in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized iron 32x6mm earth strip by means of bolts, nuts check nuts and washers of galvanized iron or steel with protection pipe of GI, medium grade 40mm bore, watering pipe 20mm bore of GI medium grade, earth plate surrounded by alternate layer of coal dust and common salt 15 cm thick each layer all as per electrical plate No 3 of SSR Part-I and connected to earthing test point all as specified or indicated and testing on completion including funnel with wire mesh, earthing chamber with PCC (1:2:4) type B-1 using 20mm graded stone aggregate, 80 mm thick precast RCC 1:2:4 type B-1 cover duly reinforced with XPM (weight not less than 3 kg/sqm) and frame including all excavation and earth work etc. all as specified. NOTE : 1. Earth chamber shall be constructed at least 1.50 metre away from the top of earth electrode, the earth pit and pipe for watering shall be provided in slanting manner. 2. Cost of 7.5m length of GI strip & GI protection pipe included in the rate of this item. Extra length shall be measured and paid for separately. (Qty= 03 No for Lightning +16 No for Ext Elect Supply)

External Water Supply Works

ITEM NO 51 : Ductile iron fittings such as bends (any type, radius and angle) Tapers any type (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch, 'Y' junction, double branch, cross (all sockets or socket and spigot) collars, tail pieces with one end flanged (integrally cast) and one end socket/spigot caps and plugs suitable upto 150 mm bore ductile iron pressure pipes of K-7 classification including nuts,bolts,washer and push on flexible rubber gasket joints, complete all as specified.Make : Jindal / Electro steel/Lanco.

ITEM NO 52 : Ductile iron fittings such as bends (any type, radius and angle) Tapers any type (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch, 'Y' junction, double branch, cross (all sockets or socket and spigot) collars, tail pieces with one end flanged (integrally cast) and one end socket/spigot caps and plugs suitable upto 200 mm to 300 mm bore ductile iron pressure pipes of K-7 classification including nuts,bolts,washer and push on flexible rubber gasket joints, complete all as specified.Make : Jindal / Electro steel/Lanco.

Item No 53 : Centrifugally cast (spun) ductile iron pressure pipes with socket & spigot ends having ISI stamping marking with IS 8329/2000 classification K7, In standard length of 5.5 - 6 mtr suitable for and including push on joint (gassket D jointing) with cement mortar lining in the pipes , complete all as specified & directed of 150 mm bore, complete all as specified and directed. Make : Jindal / Electro steel/Lanco/TATA or equivalent mentioned in Appx 'B'.NOTE:-Ductile iron fittings will be measured and paid for separately.

Item No 54 : Centrifugally cast (spun) ductile iron pressure pipes with socket & spigot ends having ISI stamping marking with IS 8329/2000 classification K7, In standard length of 5.5 - 6 mtr suitable for and including push on joint (gassket D jointing) with cement mortar lining in the pipes , complete all as specified & directed of 100 mm bore, complete all as specified and directed. Make : Jindal / Electro steel/Lanco/TATA or equivalent mentioned in Appx 'B'.NOTE:-Ductile iron fittings will be measured and paid for separately.

Item No 55 : Construction of brick masonary valve pit of size 1200 mm x 1200mm x 1200 mm (Internal size) thickness of walls shall be 23cm in brick work in cm 1:6 internally plastered in cm (1:6) and externally plastered in cm (1:4) over 15cm thick PCC 1:4:8 type D-2 having 15m offset around, including 4 cm thick coping in PCC 1:2:4 type B-1 on the top of the brick wall and 3mm thick mild steel sheet cover and angle iron frame of size 40 mm x 40mm x 6mm including provn of suitable hold fasts to hold the frame, locking arrangement and lifting handle, duly painted with two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as specified and as directed by Engineer-in-Charge.

Item No 56 : Construction of brick masonary valve pit of size 900 mm x 900mm x 900 mm (Internal size) thickness of walls shall be 23cm in brick work in cm 1:6 internally plastered in cm (1:6) and externally plastered in cm (1:4) over 15cm thick PCC 1:4:8 type D-2 having 15m offset around, including 4 cm thick coping in PCC 1:2:4 type B-1 on the top of the brick wall and 3mm thick mild steel sheet cover and angle iron frame of size 40 mm x 40mm x 6mm including provn of suitable hold fasts to hold the frame, locking arrangement and lifting handle, duly painted with two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as specified and as directed by Engineer-in-Charge.

Item No 57 : Sluice valve, 150 mm bore, cast iron body, having brass spindle with iron wheel at top, class PN 1.0, with flanged ends, drilled suitably, complete with joints and including necessary joints by means of mild steel bolts, nuts washers and rubber gaskets ,iron wheel head etc, conformig to IS 14846-2000,complete all as specified and directed.

Item No 58 : Sluice valve, 100 mm bore, cast iron body, having brass spindle with iron wheel at top, class PN 1.0, with flanged ends, drilled suitably, complete with joints and including necessary joints by means of mild steel bolts, nuts washers and rubber gaskets ,iron wheel head etc, conformig to IS 14846-2000,complete all as specified and directed.

External Electric Supply Works

ITEM NO.65 : Submain wiring with 2 single core FRLSH PVC insulated and unsheathed cable with stranded copper conductor of 2.5 Sq mm drawing in & including heavy grade PVC Concealed conduit ISI marked of suitable size with all accessories and one additional 1 run of wire of 2.5 Sq mm (Nominal Crossectinal Area) FRLSH PVC insulated unsheathed 1100 Volts Copper conductor but green in colour for earth DBs and boxes with proper thimbles,complete all as specified and directed. (NOTE :-Two rurns of cable ,1 run of earth wire & one run of PVC conduit shall be measured as one unit)

Item No 66 : LED 25W post top, IP65, energy saving, new generation, envirmental friendly, long life aesthetically designed with symmetrical light distribution,spun aluminium land scap luminaire with high power led as light source,clear acrylic cover light fitting including 25 watt LED bulb or strip and suitable dia of GI pipe for mounting the fitting, prewired with all accessories, complete all as specified and as directed. Make : HAVELLS-Cat Part No.RUBYPT25WLED757PSYMTOPC/PHILIPS/Cromption Greaves/ HPL or equivalent model in makes mentioned in Appendix 'B'.

Item No 67 : LED street light, IP 66 powder coated pressure die cast aluminium compact high power LED street light fitting 45 watts with heat resistant toughned glass complete with all accessoreis watts,complete all as specified and as directed. Make: PolycabPUB05007 or equivalent in Phillips/ Crompton Greaves or equivalent model in makes mentioned in Appendix 'B'.

Item No 68 : Brackets for street light ,1.5 metre length(straight or bend in any angle),40 mm bore,light grade GI pipe with 2 Nos clamps,nuts,bolts etc(for fixing on poles),complete all as specified and directed.

Item No 69 : Time switches (Electronic type)415 volts three phase of 16/ 20 amp rating including 20 Amp contactor fitted inside steel encloser. (To be Fixed in LT Panels),complete all as specified and directed.

Item No 70 : Junction Box of size 300x250x150mm with locking arrangement, with and including 63 Amp aluminium bus bar (04 No) fixed on porecelain base insulator & 02 No MCB TPN 32 Amp,01 No MCB SP 10Amp. Junction box made out of 2 mm thick MS sheet, painted with 2 coats of synthetic enamel paint over a coat of redoxide primer with suitable size of cable glands & MS clamps nuts, bolts & washers etc, complete all as specified and as directed.

Item No 71 : Cable route indicator shown "MES HT UG cables" painted in brown colour and root of cable with aero made of CI in suitable eleiptical shape and fixed in MS rod 12mm dia 70 cm long ( all word embosed) and embaded in PCC block of size 30 cmx 30cm x 60cm in ground, complete all as specified and as directed.

Item No 72 : Cable route indicator with engraved "MES LT UG cables" painted in blue colour and root of cable with aero made of CI in suitable eleiptical shape and fixed in MS rod 12mm dia 70 cm long (all word embosed) and embedded in PCC block of size 30cm x 30cm x 60cm in ground, complete all as specified and as directed.

Item No 73 : 15 metre high galvanised steel tubular HIGH MAST light truly vertical in position, sutaible for 8 lantern asymmetrically , with luminaire mounting arm, pully assembly aviation obstruction light,lightning arrestor,spike including bolted with base RCC foundation as per height and system is suitable for 08 No to 9 No 160 W LED Light, complete all as specified and directed.Make:Bajaj/crompton Greevs /Philips. The erection of mast light fitting will be done in the following steps & Quantity :- (a) Erection Part :- (i) Erection of suitable shallow foundation with RCC 1:2:4 concrete for the high mast considering the safe soil bearing capacity at site as 10 Ton/Sqm at 2 meter depth-01 No (ii) Erection of the high mast with the help of suitable equipments and wiring of luminaries with supply of appropirate wiring materials-02 No (b) Supply Part :- (i) 15 M high mast system accessories:- Mast shaft shall be in two section, hot dip galvanized and suitable for wind velocity as per IS 875 part 3. It shall also include accessories for high mast including head frame, 2 point suspension system with steel wire rope 6 mm dia (7/19 construction) double drum winch, galvanized lantern carriage arrangement suitable for 09 luminaries asymmetrically & its control gear boxes and lightening arrestor spikes. The mast shall have an integral power tool installed inside the base compartment for its operation-01No (ii) Supply of bolts along with nuts, washers, anchor plates and templates for foundation manufactured from special steel -01Set (iii) Supply of single dome aviation obstruction lights of type BJAOL (1) with 1 No 25 W neon spiral lamp. (2) Fitting per mast is necessary if no taller structures are in near vicinity).-02Nos NOTE: (i)The rate includes provn of inbuilt electric motor tool including accessorics for lowering and raising of lantern (ii) The Luminaries are not included in the item shall be measured and paid seperatly.

Item No 74 : LED Flood Light 1x160 W powder coated PDC aluminium body with toughened glass visor fitted in frame equipped with secondary optical lens for superior light distribution efficacy > 100 Lm/W available CCT 6000K IP 66, complete all as specified and as directed. Make - Polycab cat Part No PAR 0201022 or equivalent in Phillips/ Crompton Greaves or equivalent model in makes mentioned in Appendix 'B'.

Item No 75 : Switching on & off the luminaries by automatic control using electro mechanical timer and contactor for automatic switch on & off of HIGH MAST at present time over current and latch mechanism including 4 core PVC flexible cable 2.5 Sqmm multi stranded copper with 3 pin metal clad socket to plug the supply for luminaries shall be mounted on PVC rigid board of suitable size provided in the base compartment of mast to terminate the incoming power supply cable from junction box to incoming luminaries complete outdoor type weather proof with MCB 63 Amps 4 pole, 25 KA for incoming, complete all as specified and as directed.

Item No 76 : Aviation obstruction light Housing high pressure, die-cast aluminium, cover-glass UV Protected clear 5 mm thick Stainless Steel support LED unit, yellow powder painted, red coloured with accessories and LED lamp standard type including necessary clamps and control switch complete on the top of OHT all as specified and as directed.

Total amount of Schedule 'A' Section-XV

M/s Khanna Enterprises

Sant Construction Co.

MICKY CONSTRUCTION PVT LTD

M/s Jatindra Construction Company

Saru Enterprises Pvt Ltd

AKM CONSTRUCTION AND ENGINEERING LLP

A S CONSTRUCTION COMPANY

H.P. CONSTRUCTION CO.