REPAIR AND REPLACEMENT OF SHEET PLUMBING FLOORING FALSE CEILING ALUMINUM WIDOW AND DOORS ETC IN OTM AND MD ACCN OF COD 505 ABW UNDER AGE BR I OF GE NORTH DELHI CANTT 10

Amount

Hacking out old broken glass (any thickness, size , quality or description) from metal frame including punching or drilling out old glazing pins/ spring clips, nut bolts & fillets at ht upto 15 mtr complete all as specified and directed.

Demoltion of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness below or above ground level complete all as directed.

Taking down cement plaster of any description & thickness from brick/concrete sufaces of wall/ceiling etc including racking out joints, hacking for keys scrubbing down with water etc. complete all as specified and directed.

Demolition of Brickwork or stone/ boulders masonry built in cement or cement lime mortar incl all quions, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed.

Dismantling of AC sheet roof corrugated/semi corrugated of any description including ridges/gutters etc at height upto 15 mtr complete all as specified and directed.

Dismantling of Plain or corrugated steel/ fibre sheeting of any guage as in roof covering including ridges/gutters etc of any description straight or curved at height upto 15 mtr complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for .

M&L 6mm thick AC Sheet corrugated/semi corrugated fixed with ''L'type or 'J'type or cranked hook/bolts at height upto 15mtr all as specified and directed

Fixing only 6 mm thick AC sheet corrugated/semi corrugated at height upto 15 mtr fixed with 'L' type or 'J' type or cranked hook bolts complete all as specified and directed.

M&L for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws at height upto 15 mtr complete all as specified and directed.

M&L for Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws at height upto 15 mtr complete all as specified and directed.

S&F 2mm thick PGI Sheet having 275 mm of zinc coating per sqm (both side) in gutter dripper straight flushing with 100mm overlap made to required shape as rain water pipe of 250mm dia incl welding or revetting and fixed in position at ht upto 15 mtr all as specified and directed.

S&F 0.80 mm thick PGI sheet as in ridges, hips valley gutters drip and straight, flashing etc having 275 gm of zinc coating per sqm (both side inclusive) fixed with L or J hook or cranked hook bolts up to 15 mtr hight complete all as specified and directed.

S&F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugations side lap fixed with coach screw and washer, L-type or J-type hooks bolts in roof, wall etc hight up to 15 mtrs complete all as spd and directed.

S&F for MS work in Bands, straps, supports or stays for RWP, ventilating pipes, gutters including bolts, if reqd hooks (stay), clamps, holdfasts, wall ties, nosing angles, hooks for hanging fans and similar small articles conforming to Fe-290 gde E-165 hight up to 15 mtrs

S&F structural steel work for rolled sections as in main and cross beams, hips and jack rafters, purlins, running rails and guides for sliding doors, fixed with angle cleats or other connecting plates gde Fe-410-W.

S&F in repair for Gypsum ceiling board for ceiling prepainted, perforated finish, 600 x 600 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light at as specified and directed.

S&F Rough cast, wired glass exc 6.00 mm thick but n.exc 6.40 mm thick fixed with Flat Iron and nut bolts in square exc. 0.5 Sqm but n.exc 0.75 sqm in each pane at ht upto 15 mtr complete all as specified and directed. ( Incl Flat Iron & nut bolts )

M&L PCC (1:2:4) type B-1, using 20mm graded stone aggregate, 100 mm thick as in floor finished even & smooth using extra cement complete all as specified and directed.

M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate), 75mm thick, laid in alternate bays and finishing the surfaces even and fair complete all as specified & directed.

S&F door closer aluminium (Die cast) body hydarulically regulated designation No-3 universal type suitable for door shutter of 851 to 1000 mm in width and of weight 61 to 80 Kg and fixed complete all as specified and directed.

Material and labour for Brick work with sub class B bricks of old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

all as item above here-in-before but except bricks complete all as specified and directed.

Taking down chowkhats or frames with shutters of any description (without taking off shutters from the frames) not exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters of any description (without taking off shutters from the frames) exc 1.50 Sqm and not exc 4.00 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC Sheet reinforced with MS square tube, in opening complete all as specified and directed.

S&F MS rolled section/ MS angle as in framing for door/vent/CB chowkhats and the like fixed with angle cleat and connecting platesFe-410, Gde E-250, incluidng welding 3 Nos MS butt hinges 100mm complete (Butt hinges shall be measured and paid for separately).

S&F 35 mm thick 2nd Class glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or founded, fitted with cut and mitred beads for securing glass, gauze.

S&F 35 mm thick 2nd class Hard Wood plain framed, panelled shuter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003

S&F 30mm thick flush shutter (Factory made) soild core construction, with black board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails, MS frame shall be covered with heat moulded wood grain printed PVC 'C' chaannel having a PVC sheet strip of 20mm width struckhuck in side with solvent cement for stiles and wood grain printed sheet for top rail and bottom rail paneling of wood grain sheet for top rail lock rail and botton rail . Paneling of wood grain printed sheet to be fitted in the MS frame welded/sealed to stile and rail , PVC sheet beading used inside styles and rails and PVC beading of used and jointed to gather with solvent cement supplying and fixing in the frame at site as per manufactrurers in structions complete all as specified and directed.

S&F steel window box type made out of 16 gauge steel section for frames & shutters as per drawing No TD-A sheet 01/03 to 03/03 with openable both glass and gauge shutters including pintel hinges 75mm long 12mm dia, 100mm long handle and tower bolt 150mm long, MS hooks & eye 150mm long all as applicable complete all as specified and directed. (Glass & wire mesh shall be paid separately)

S&F in repairs Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F in repair mild steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm cut to required size and fixed to wooden door/ steel window shutter with aluminium wire staples complete all as specified and directed.

S&F mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aparture 1.40mm Fixed with steel wire staples complete all as specified and directed by Engineer-in-Charge.

M&L mild steel Flat Iron ( 25 x 3 ) mm for hold fasts complete welded and grinded for smooth surfaces complete all as specified and directed.

S&F stainless steel butt hinges 100mm size cold rolled medium weight and fixed complete all as specified and directed.

S&F stainless steel butt hinges 75 mm size cold rolled medium weight and fixed complete all as specified and directed.

S&F Aluminium sliding door bolt, not less than 12mm dia and 250 mm long complete all as specified and directed.

S&F aluminium anodised barrel tower bolts 150mm long of extruded section fixed complete all as specified and directed.

S&F Aluminium handles cast type, anodised, 150 mm size and fixed complete all as specified and directed.

S&F in repairs MS 300mm long ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

M&L for PCC (1:2:4 ) type B-1 ( using 20 mm graded stone aggregate ) as in bed blocks for fixing hold fasts of doos and windows frame complete all as specified and directed by engr-in-charge.

M&L painting two coats of synthetic enamel paints over a coat of pink primer on new wooden surfaces of grith exc 10CM , including preparation of surfaces complete all as specified and directed.

S & F 3mm thick sheet glass, ordinary quality and glazing in steel sections/wooden frame with oil putty in squares n. exc 0.5 Sqm each pane complete all as specified and directed.

S & F 3mm thick figured glass, pin head type and glazing with oil putty in squares n. exc 0.5 Sqm each pane complete in all respect as specified

M&L preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for cement concrete as in sub base of flooring using cement concrete type D2 1:4:8 (40mmgraded aggregate) 75 mm thick complete all as specified and directed.

M&L cement concrete type B1 (1:2:4) using 20mm graded aggregate as in coping bending rounded or chamfered on edges including necessary form work complete all as specified and directed.

M&L chequered cement concrete tiles 20cmx20cmx25mm thick set, jointed and pointed in neat cement slurry in floor over 15 mm thick screed bed of CM 1:6 complete all as specified.

M&L for rendering 10mm thick in cement mortar (1:4) on fair faces of concreate surfaces in ceiling complete all as specified.

M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces complete all as specified.

M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces cement complete all as specified.

M&L prepartion of new plastered surface of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for two coats of white wash on newly plastered surfaces of walls incl preparation of surfaces complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceilling and applying two coats of white wash complete all as specified.

M&L preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified .

Demolition of stone slab and tiles of any description or thickness laid bedded as in floor/wall complete all as specified & directed.

M/L PCC 1:2:4, type B0 25 mm thick as a levelling course of tiles using 12.5 mm graded stone aggregate.

M&L for coloured non skid ceramic joint free tiles 7 to 8 mm thick area of each tiles exc 0.11 but n. exc 0.18 sqm in floors etc, approved colour, set, jointed in cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 20 mm thick screed bed in CM 1:6 etc complete as in flooring all as specified and directed.

Supply and fix in repairs vitreous china water closet Squatt Pattern ) " Orissa pattern " size 580 x 440 mm white with integral foot rests ‘P’ or ‘S’ trap front or back inlet (excluding flushing cistern and flush pipe ) including lime concrete complete all as specified and directed ( Make HINDWARE / PARRYWARE / NEYCER/ CERA EQUIVALENT )

S&F Supply only PVC low level flushing cistern 10 ltrs capacity incl PVC float valves, PVC connection and out let pipes complete all as specified and directed.

M&L cast iron Nahani trap 75mm out let dia meter with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4). complete all as specified and directed.

S&F in repair Viterous China wash hand basin white, flat back size 550 x 400 mm incl CI or Angle iron 50x50x6 mm brackets one No CP fancy Pillar tap 15mm bore , one No 32 mm dia CP waste coupling, one No 32mm dia PVC flexible waste pipe and one No 15mm bore 450mm long PVC connection complete all as specified and directed by Engineer in charge.

M&L for preparation of old decorated plastered or unplastered surfaces of wall by brooming down scrapping down smoke and efflorescent salts etc and applying one coat of white wash on walls complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of ceiling by brooming down scrapping down smoke and efflorescent salts etc and applying one coat of white wash on ceiling complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying two coats of oil bounf distemper including preparation of old surfaces complete all as specified and directed.

S&F in repair aluminium anodised hollow section door frame and shutter ( swing type ) openable with top rail , style of section 47.62 x 44.45 x 1.60 mm and lock rail, bottom rail of 101x44.5 x1.6 mm incl jointing cleats, snap beading, glass/ nova pan, gaset for fixing glass/board in panel including 2 nos dish type handle, hinges, tower bolts -02 Nos 150 mm in each leaf and screws complete all as specified. ( Note : Fixture/fittings of door shutter are deemed to be inclusive in the quoted rate).

S&F in repair aluminium window made of aluminium tubular frame and shutter of section 63.50 x 38.10 x 1.60 mm and style fixed openable horizontal and vertical member of aluminium beading rubber gaset of aluminium fittings such as tower bolts, handle stay and rod and hinges, snap beading, glass/ nova pan, gaset for fixing glass etc complete all as specified and directed.

S&F in repair aluminum partition with 12 mm thick prelaminated particle board of choice colour in bottom panel and 5mm thick frosted/design glass in top panel fixed with clips aluminium, beads, rubber gaskets etc., centre to centre distance of vertical member shall n.exc 1mtr and horizontal member shall n.exc 1.10 mtr with aluminum powder coated section as specified in Jindal Catalogue complete all as specified & directed.

M&L 20 mm thick granite (of any type) machine cut, bedded and jointed with grey cement slurry and pointed with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L in repair 20 mm thick granite as in urinal partition in vertical position fix with wall cutting of vertical grove to wall and floor and filled with admixture of pigment to match the shade of granite stone (of any type) machine cut, including grinding, moulding and polishing complete all as specified and directed.

M&L Indian type WC/EWC including demolittion of cement concrete (unreinforced) in sunken portion of WC, area n.exc 1.50 sqm including removing of unserviceable materials and Providing half brick surrounding walls , rendering 10 mm thick plaster in cement mortar ( 1:4 ) with WPC and laying lean concrete in bottom portion of WC and then applying 3mm thick APP membrane over bitumen primer surface of walls and bottom portion of WC with torch method , provide 32 mm dia GI tubing as spout of sunken portion 0.60 m long of approved quality , By filling Khanger / cinder and lean concrete, supply and fix vitreous china Squatting pan "Orissa pattern" size 580x440mm white, with integral foot rest & ' P' traps & jointing new 100 mm dia CI pipe with lead joints to WC ( excluding flushing cistern & flush pipe ) . Testing of sunken portion will be carried out by filling water for 24 Hrs in sunken area complete in all respect as specified and directed .

The new hut furnitures

DEEP ASSOCIATES

ergon enterprises

imran construction company

Adhunik Builders

PRAHLAD NARAIN KOLI

M/S VERMA BUILDER

GAR CONSTRUCTIONS

S GOURAV PRAKASH ENTERPRISES