CONSTRUCTION OF ADDITIONAL ACCOMODATION (08 ROOMS DOUBLE STOREY BUILDING) AT GOVT HIGH SCHOOL TAGOOD ZONE INDERWAL DISTRICT KISHTWAR

Amount

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as 50 meter beyond 1m from cutting edge Ordinary Rock directed by Engineer-in-Charge

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil :25 meter beyond 1 m from cutting edge

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All works up to plinth level in M-7.5(1:4:8) grade, with 40mm nominal size of (Crushed stone aggregates) including all carriages lead & lift.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All works upto plinth level in M-20(1:1.5:3) grade, with 20mm nominal size of crushed stone aggregates. including all carriages lead & lift.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Crushed Aggregates. including all carriages lead & lift.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and sturts, etc. upto floor five level excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size. including all carriages lead & lift.

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand 4 graded stone aggregate 20mm nominal size. including all carriages lead & lift.

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 ( 1 cement : 6 coarse sand). including all carriages lead & lift.

Extra for brick work in superstructure above plinth level upto floor V level. (By manual means). including all carriages lead & lift.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class Deodar wood

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. including all carriages lead & lift.

Providing 40x5 mm flat iron hold fast 40 in long including fixing to frame with 1Omm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix(1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size )

Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. Second class Kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.coir veneer board (conforming to IS 14842)( 12 mm thick)

Providing and fixing 35mm glazed shutters for doors, windowsand clerestory windows using 1Okg/sqm (4mm thick) float for glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Kail wood

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Kail wood 35mm

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to openings wooden frames with rawl plugs screws etc. including all carriages lead & lift.

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:2nd class teak wood 50x12mm

Centering and Shuttering including strutting, popping and removal of form work Foundations: footings, bases of columns

Centering and Shuttering including strutting, popping and removal of form work Lintels, beams, plinth beams, girders, bressumers and centilevers.

Centering and Shuttering including strutting, popping and removal of form work Suspended floors, roofs, landings, balconies and access platform.

Centering and Shuttering including strutting, popping and removal of form work Edges of slabs and breaks in floors and walls.Under 20 cms wide

Centering and Shuttering including strutting, popping and removal of form work Columns, Pillars, Piers, Abutments, Posts and Struts

20 mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) including all carriages lead & lift.

15mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) including all carriages lead & lift.

12 mm cement plaster to ceiling of mix 1 : 4(1 cement: 4 fine sand) including all carriages lead & lift.

Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigmentsetc. complete Size of tile 600x600 mm. including all carriages lead & lift.

Filling available excavated earth(excluding rock) in trenches ,plinth,sudes of foundation etc.Layers not exceeding 20 cm in depth,conslidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m. including all carriages lead & lift.

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing & staircase railing and similar work including applying a priming coat of approved steel primer. G. I. pipes 40mm nominal bore (class B) including all carriages lead & lift.

Providing and fixing 6mm Thick Ply ceiling, sheet of approved quality with necessary nails etc. complete (frame work to be paid for separately) . including all carriages lead & lift.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Badloo /far wood. including all carriages lead & lift.

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel Primer all works. including all carriages lead & lift.

Providing corrugated G. S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet ashers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required. 0.63 mm thick with zinc coating not less than 275gm/m2. including all carriages lead & lift.

Providing ridges or hips of width 60cm overall width plain G.S.sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G. I. limpet and bitumen washers complete0.63mm thick with zinc coating not less than 275gm/m2. including all carriages lead & lift.

Providing and fixing plained eaves boarding(12 mm Ply board),250mmx32mm nominal size. including all carriages lead & lift.

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat cement primer of approved brand and manufacture on walls surfaces cement primer

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Aggregates. including all carriages lead & lift.

Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete. including all carriages lead & lift.

Providing and laying in position brick bats including all carriages lead & lift.

Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :300x16 mm

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 100x10 mm

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 200x10 mm

Providing and fixing aluminium hanging floor door stopper lSI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete

Providing and fixing Aluminium handels ISI marked anidized (anodic coating) not less than grade AC 10 per IS 1868) transpaent or dyed to required colour or shade with nuts and screw etc complete 125mm

Providing and fixing Aluminium handels ISI marked anidized (anodic coating) not less than grade AC 10 per IS 1868) transpaent or dyed to required colour or shade with nuts and screw etc complete 100mm

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. including all carriages lead & lift.

NATNOO CONSTRUCTION

NIAZ AHMED

NEK RAM DOFARA

JAGDISH CHANDER SHARMA & SONS

Kashmir Singh

shabir ahmed kamal