Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹56.9 L
EMD Value
₹1.1 L
Closing Date
3 Dec 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
DRAWING
15 conditions · 4 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimumaverageannual contractual turnover of V/N or V whichever is less; whereV=Advertised value of the tender in crores of Rupees. N= Number ofyearsprescribed for completion of work for which bids have been invited.Theaverage annual contractual turnover shall be calculated as anaverage of"total contractual payments" in the previous three financialyears, as perthe audited balance sheet. However, in case balance sheetof theprevious year is yet to be prepared/ audited, the audited balancesheetof the fourth previous year shall be considered for calculatingaverageannual contractual turnover. The tenderers shall submitrequisiteinformation as per Annexure-F, along with copies of AuditedBalanceSheets duly certified by the Chartered Accountant/ CertificatefromChartered Accountant duly supported by Audited Balance Sheet.
Electrical License: The tenderer shall possess a valid ElectricalContractorLicense, issued by any State Government or UnionTerritoryAdministration, authorizing execution of electrical works up to11 kV. Thecontractor shall have in his employment or shall engage aperson holdinga valid certificate of competency issued by any StateGovernment orUnion Territory Administration for supervision of electricalworks up to 11kV. Offers not accompanied by a valid ElectricalContractor License andrequisite Supervisor competency for works up to11 kV shall besummarily rejected Note: In case of expiry of validity oflicense duringcontract, the contractor should renew the license so that itis alwaysvalid during contract).
Technical Eligibility Criteria: (a) The tenderer must havesuccessfullycompleted or substantially completed any of the followingduring last 07(seven) years, ending last day of month before the one inwhich tender isinvited: Three similar works costing not less than theamount equal to30% of advertised value of the tender, or Two similarworks costing notless than the amount equal to 40% of advertised valueof the tender, orOne similar work costing not less than the amount equalto 60% ofadvertised value of the tender. (i) In case of composite works(e.g.,works involving more than one distinct component, such asCivilEngineering works, S&T works, Electrical works, OHE works etc. andinthe case of major bridges - substructure, superstructure etc.),tenderermust have successfully completed or substantially completedany of thefollowing during last 07 (seven) years, ending last day ofmonth beforethe one in which tender is invited: Three similar workscosting not lessthan the amount equal to 30% of advertised value ofeach component oftender, or Two similar works costing not less than theamount equal to40% of advertised value of each component of tender,or One similarwork costing not less than the amount equal to 60% ofadvertised valueof each component of tender.
Definition of Similar nature of work:-Works of wiring/cabling orinstallation and commissioning of electrical items (other than oncoaches) such as lights, fans, pumps, charging arrangements, earthingetc. (with or without supply of items / equipment) for 230V, 1phase or415V, 3phase system or higher voltages".
9 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer /s are required to submit a scanned / attested copy of following information along with their tender- 1. Bank Account No 2. Name of Bank 3. Indian Financial System Code {IFSC} 4.PAN No 5. Tenderers Contact No Contractor should provide firms PAN, issued by Income Tax Department with his quote or within30 {Thirty} days of award of contract. No payment will be released without submission of PAN. All taxes including surcharge and cess shall be recovered from his payment as per tax provisions in vogue.
The tenderer shall thoroughly go through the entire tender document and strictly adhere the instructions and directions given at different pages.
It is responsibility of the tenderer that they ensure to see any corrigendum of the tender to check the corrigendum on the website from time to time.
All the required/supporting documents should be scanned and uploaded.
In case the date of closing mentioned in the Notice Inviting Tender is declared a holiday/bandh/strike etc. on any account, the date of closing tender online will not be changed as the application in the website of IREPS does not permit submission of any offer after closing date and time of the tender. However, opening of tenders online will be on any convenient day after the closing date/time of tenders.
Opening of e-tender online:- The e-tenders will be opened online using the IREPS portal. No representative is required to be present for opening of tender and taking notes of rates quoted and ranking as the complete details of rates etc. of all the bidders shall be available to the bidders in the website after the opening of the tender.
1) Nanded Division- Provision of High-Level PF No.1 of 550 m length at Bimbari (BMBE).-Electrical Arrangements2) Nanded Division- Provision of High-Level PF No.2 of 550 m length and extension of PF No.1 up to 550 m at Pathrad Halt.- Electrical Arrangements
NED-E-31-2026-27~SCR
NED-E-31-2026-27
Open
Works - General
12 Months
Nanded, Maharashtra
₹0
₹1.1 L
12 Nov 2026
12 Nov 2026
19 Nov 2026
218 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 24,05,332 | ||
| — | 150.00 | — | — | ||
| Providing and fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. treated with anti-rust treatment and duly power coated as per the above specification. | — | — | — | 37,350 | |
| — | 30.00 | — | — | ||
| Supplying and erecting of50 mm x 5 mm sizeelectrolyte copper patti orbar in bus bar chamber / inpanel or any other purpose,500 V with require capacitywith 99.9% copper puritywith fixing arrangement(like lug or bottle type lug)to both the end with highgrade polyolefin insulationsleeve complete | — | — | — | 33,900 | |
| — | 1.00 | — | — | ||
| Supplying and erecting LTCT multifunction DLMScompliance energy meter of accuracy of class 0.5with optical & RS 232 port,backlit LCD, measures &displays tri vector energy,load survey, TOD, tamperdetection & logging, powerON /OFF events,instantaneous parametersof rating 1/5 A with displayin absence of powercomplete with zeroadjustment & testcertificate frommanufacturer erected onprovided M.S. box andconnected to CTs suitablefor 3x240V,50 Hz. | — | — | — | 8,137 | |
| — | 3.00 | — | — | ||
| Supplying and erecting LTcurrent transformer withbar primary 50/5 to 1000/5ratio with 15 VA burdenerected in provided CRCAbox duly secured withinsulating materialsconnected to the meterwith test certificates. | — | — | — | 2,634 | |
| — | 1.00 | — | — | ||
| Supplying and erectingpanel mounting type digitalammeter having three andhalf digit LED display,external CT operated,calibrated for 0 to 1000AAC supply with necessaryPVC wire leads and lugsand mounting hardware onprovided panel completewith calibration certificatefrom manufacturer suitableto operate on 500V. | — | — | — | 1,361 | |
| — | 1.00 | — | — | ||
| Supplying and erectingpanel mounting type digitalvoltmeter having Three andhalf digit LED display,calibrated for 0-750V ACsuitable to operate on 500VAC supply with necessaryPVC wire leads and lugsand mounting hardware onprovided panel completewith calibration certificatefrom manufacturer suitableto operate on 500V. | — | — | — | 1,305 | |
| — | 2.00 | — | — | ||
| Supplying and erectingselector switch suitable forvoltmeter/ammeter for 3phase AC supply500/1000V, 50Hz, onprovided box / panel andduly connecting withnecessary PVC wire leadsand lugs. | — | — | — | 640 | |
| — | 2.00 | — | — | ||
| Supply & provision of 3 NosRYB indication lamps ofLED type including with allconnected accessoriescomplete. | — | — | — | 876 | |
| — | 2.00 | — | — | ||
| Supply, erection, testingand commissioning of allmaterial, excavation, andcasting of cement concretefoundation/concreting inratio 1:3:6 | — | — | — | 12,014 | |
| — | 2.00 | — | — | ||
| Supply, fixing, testing and commissioning of Microprocessor Release125 A ; 4Pole, MCCB suitable for operation on415V,50 Hz 3 Phase AC supply in LT Panel withsupply of all connectedaccessories and alliedmaterials as perspecification attached.Make: L&T/Legrand/Havells Or Similar | — | — | — | 28,394 | |
| — | 2.00 | — | — | ||
| Supply and fixing of 63 A 4P MCB C Curve, 10 KA capacity with necessary connections and all accessoriescomplete. | — | — | — | 5,482 | |
| — | 1.00 | — | — | ||
| Supply of DPX3 160+18 of 8 way DB of legrand cat no.5077 47 with metal door with provision for incomer ofMCCB up to 160 Amps , bus bar of capacity 250A and outgoing for 18 Module with busbar din and neutral link with all necessary accessories complete or equivalent make. | — | — | — | 16,212 | |
| — | 2.00 | — | — | ||
| Supply and installation of DPX3 160 thermal magnetic based release ; Icu = 36K A; 100A 4 Pole MCCB conformto IEC 60947-2 of model no. 4200 95 of Legrand make or equivalent make with extended ROM , spreader links (2sets). | — | — | — | 18,278 | |
| — | 6.00 | — | — | ||
| Supply and fixing of 32 A 4P MCB B Curve IS/IEC 60898-1 (2002) 10 kA breaking capacity IP20protected terminals of model no.402463 of Legrand make or it's equivalent. | — | — | — | 13,326 | |
| — | 2.00 | — | — | ||
| Supply and fixing of 40 A Electromechanical 4P RCBO 30 mA sensitivity as per in accordance with IS12640-2 & IEC 61009-1, of Model No.DHBMACTN8030040 of Havell's Make or its equivalent withnecessary connections and all accessories complete | — | — | — | 9,546 | |
| — | 24.00 | — | — | ||
| Providing & erecting 5 m high (clearheight) galvanised OCTAGONAL pole with foundation bolts and it includes 6A SPMCB having bottom of 130 mm A/F, top70 mm A/F on provided foundation as perspecification . Make:Bajaj/Valmont/ Transrail /MagneticIndustries or similar | — | — | — | 3,16,680 | |
| — | 24.00 | — | — | ||
| Providing & casting of M - 20 gradereinforced cement concrete (RCC)foundation suitable for 3m to 5m highoctagonal / conical G.I. pole consideringthe safe soil bearing capacity at site as 10T/sq m at 1.5 m depth including supply ofsteel, concrete, excavation and fixingprovided nut bolts with the help oftemplate as per design in an approvedmanner. | — | — | — | 74,544 | |
| — | 24.00 | — | — | ||
| Supplying and erecting Street lightbracket for erection of Double fitting madefrom 40 mm. dia 'B' class G.I. pipe 1.0 m in length along with pole cap of 300 mmlength 100 mm dia or suitable duly welded as perspecification | — | — | — | 28,488 | |
| — | 48.00 | — | — | ||
| Service connection to the fitting from thejunction box of 5 mtrs. Octagonal pole bymeans of PVC insulated copper conductorof 3 core 1.5 sq mm with necessary lugsat the junction box and necessarytermination at the lumaninaire complete | — | — | — | 18,096 | |
| — | 58.00 | — | — | ||
| Supply and fixing of 40 W LED type weather proof street light fitting complete with all accessories and conforming to specification Make: Bajaj / Havells / Philips/Orient /Surya or similar | — | — | — | 1,45,928 | |
| — | 70.00 | — | — | ||
| Supply and fixing of 20W 4 feet LED tube light with all connected accessories complete for fixing (The supplyincludes accessories such as clamps, ties extension wires etc for fixing) as per attached railway specification | — | — | — | 26,950 | |
| — | 16.00 | — | — | ||
| Supply and Erection of energy efficient BLDC star electric ceiling fan of 1200mm sweep as per attached railwayspecification and including necessary plastering, masonry work and clamps nuts bolts etc. | — | — | — | 44,704 | |
| — | 14.00 | — | — | ||
| Supply, fixing, connecting and commissioning of 6A 3pin/5pin modular plug socket, with 6A modular controlswitch on existing control board with wiring. | — | — | — | 4,858 | |
| — | 8.00 | — | — | ||
| Supply and Fixing of Surface mounting plastic gang box-8 module of model no: JS 08 006 of GM make orequivalent with 8 module cover plate (With support frame) of model no: PK SB 08 011 - CASABLANCA of GMmake or equivalent make comply with IEC 60669-1 with its latest amendments including all accessoriescomplete. | — | — | — | 2,792 | |
| — | 1.00 | — | — | ||
| Supply and fixing of metal flush box-4 module of model no:JIM 04 003 of GM FOURFIVE make or its equivalentwith 4 module cover plate (With support frame) of model no:PK SB 04 004 - CASABLANCA of GM make orequivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 220 | |
| — | 20.00 | — | — | ||
| Supply and erection modular type switch6/ 10A ISI mark approved make dulyerected on provided plate and box withwiring connections complete. Make:Legrand/Havells/GM | — | — | — | 1,000 | |
| — | 2.00 | — | — | ||
| Supply and fixing of Ventilating Fans(Exhaust fan) of 4 pole 300 mm sweepsize with metallic body with capacitorconforming to IS No.2312/67 (Reaffirmed2005) complete with louver and allconnected accessories. Make:Havells/CG/Bajaj/Khaitan | — | — | — | 4,560 | |
| — | 4.00 | — | — | ||
| Provision of supply, fixing,connecting,and testing of fabricated junction box(L-56cm, W- 23 cm, D-15 cm) madewith 18 SWG sheet steel enclosurewith door and locking arrangementsand comprising of 8 nos of 6/10/16 ASP MCB, 2 nos of 16/32 A DPMCB withneutral and earth links and 8 Nos.busbar supporting insulators and fixingwith suitable mounting with MS clampsas per site condition. Make: M/s.Havells/Legrand/L&T or similar. | — | — | — | 14,376 | |
| — | 50.00 | — | — | ||
| Supply of 50 mm dia 'B' class ERW GIpipe conforming to IS: 1239 Part 1(2004) and fixing with suitable clampson wall/building including laying ofcable through GI pipe. | — | — | — | 27,450 | |
| — | 800.00 | — | — | ||
| Supply and erection of 3Nos.. of1.5 Sq.mm, of FRLS PVCinsulated flexible multistrandcopper wire including earthcontinuity wire . | — | — | — | 43,200 | |
| — | 100.00 | — | — | ||
| Supply and Installation of 300mm x 50mm x 2mm thick GI perforated cable tray with cover along with requiredangle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall/ Ceiling etc. complete. | — | — | — | 65,200 | |
| — | 200.00 | — | — | ||
| Supply and run of 2 nos, 2.5 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of1.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit Pipe conforming to IS694 (2010) with latest amendements. | — | — | — | 20,200 | |
| — | 100.00 | — | — | ||
| Supply and run of 2 nos, 4.0 sq.mm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of2.5 sq.mm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit pipe conforming to IS694 (2010) with latest amendements. | — | — | — | 15,200 | |
| — | 100.00 | — | — | ||
| Supply and run of 2 nos, 6.0 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of2.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit Pipe conforming to IS694 (2010) with latest amendements. | — | — | — | 17,900 | |
| — | 1000.00 | — | — | ||
| Supply and Running of 25 mm dia, Ivory coloured PVC conduit ( ISI marked) of wall thickness not less than 2mm along with junction boxes, bends and all accessories etc. as required as per site requirement. Running ofconduit, fixing with suitable clamps and nuts in groove / open /shelter | — | — | — | 48,000 | |
| — | 4.00 | — | — | ||
| Supply, fixing and connecting of Cable Junction Boxes IP 55/IP 65 with metric knockouts for cable entry Cablejunction boxes of model no. K 9504 of Hensel make conforming to IS:13573/92,IEC 60947-3 with its latestamendments, with necessary terminals suitable for cables upto 50 Sq mm and all necessary accessoriescomplete. | — | — | — | 29,244 | |
| — | 400.00 | — | — | ||
| Supply and laying of ISI marked 4 core25 sq mm cross linked polyethylene(XLPE)insulated LT UG cable, PVCouter sheathed, armored withgalvanized round steel wire or steelstrip and with Aluminium conductorsuitable for rated voltage at 1100 voltsgrade and conforming to IS:7098(Part-1)/1988with amdt. no. 1,2 & 3(reaffirmed 2005) or latest. | — | — | — | 95,200 | |
| — | 900.00 | — | — | ||
| Supply, Laying, Testing and Termination of 1.1 KV Grade 4 core 16 sq.mm XLPE insulated PVC sheathedAluminium armoured cable as per IS 7098(Part 1)1988 with latest amendments and with necessary lugs andterminations complete. | — | — | — | 1,26,900 | |
| — | 1600.00 | — | — | ||
| Supply, erecting and laying of HDPE pipeof PE-80 grade in PN-4 outer dia of HDPEpipe 63 mm (nearest 2"" dia) and wallthickness minimum 2.5 mm maximum 2.8mm with ""T' joints, bends, elbows etc.including all other connected accessories.Make: M/s.Sudhakar/Nagarjuna polymer/Nandi/Plasto | — | — | — | 1,98,400 | |
| — | 1400.00 | — | — | ||
| Supply and running of 8 SWG GI wire is tobe laid for earth continuity. | — | — | — | 16,800 | |
| — | 10.00 | — | — | ||
| Supply and fixing of B curve DP MCBs of 32 A with all connected accessories as per IEC 60898-1 with its latestamendments. | — | — | — | 7,010 | |
| — | 10.00 | — | — | ||
| Supply and Erection of B curve 16A DP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection asper IS/IEC 60898 - 1 with its latest amendments with all connected accessories. | — | — | — | 6,550 | |
| — | 10.00 | — | — | ||
| Supply and Erection of B curve 10A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection asper IS/IEC 60898 - 1 with its latest amendments including all connected accessories. | — | — | — | 2,270 | |
| — | 10.00 | — | — | ||
| Supply and Erection of B curve 6A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection asper IS/IEC 60898 - 1 with its latest amendments including all connected accessories. | — | — | — | 2,270 | |
| — | 3.00 | — | — | ||
| Supply, fixing and connecting of 2pole 2 module 32A Lexic RCBOs conforming to IS 12640-2(2008) with its latestamendments as advised by the site supervisor with all necessary accessories complete. | — | — | — | 10,368 | |
| — | 3.00 | — | — | ||
| Supply, fixing and connecting of 2pole 2 module 16A/25A Lexic RCBOs conforming to IS 12640-2(2008) with itslatest amendments as advised by the site supervisor with all necessary accessories complete. | — | — | — | 10,071 | |
| — | 8.00 | — | — | ||
| Supply and erection of earth electrode as perthe enclosed specification (including digging earth pit, electrode earth box with reinforced concrete complete with all connected materials and works including connecting the earth electrode and aerial earthing according to IS 3043 and RDSO drawing ETI/OHE/P/7021 in other than substations. | — | — | — | 30,384 | |
| — | 400.00 | — | — | ||
| "Cutting of esphated road/ concrete/ cement/under the track etc., and excavation of cable trench 30cm widex90cm deep oad etc., for laying of HT/LTUG cable. After laying of cable the trench should be brought to its original position by providing tar/ concrete/ cement as per the site conditions and asper directions of Rly.Engineer." | — | — | — | 81,200 | |
| — | 200.00 | — | — | ||
| Excavation of cable trench 30 cm wide x 90cm deep in all types of soils for HT/LTUG cable as per specification | — | — | — | 24,400 | |
| — | 4.00 | — | — | ||
| Design Supply,testing of ON/OFF timer arrangement for ON/OFF operation of platform lighting in MS Sheet enclosure 12 inches X 10 Inches size with door including following accessories complete. (1) 3 Pole contractor,45 A, ACI (25A, AC3) model type MNX 25 Of L&T make or Legrand or Havells.(2) Micon 225 Timer cat ref. no 2 ANDTO of L&T Make Legrand, Havells.(3). On push button with elements of L&T, Legrand, Havells. (4).LED indication lamp.(5). Powder coated MS sheet box Sizes 12 inches x 10 Inches X 6 inches including clamping arrangement. (6) 4-Way terminal connector and internal arrangements. Offer accepted make / brand: SSGE, Model No. SSGE/ODT/16 and All accessories make: L and T | — | — | — | 18,192 | |
| — | 12.00 | — | — | ||
| Cutting and shifting ofall types depot/mentionedlocation as per the sitecondition | — | — | — | 39,048 | |
| — | — | — | GI | ||
| — | 10.00 | — | — | ||
| — | 30.00 | — | — | ||
| — | 1000.00 | — | — | ||
| — | 12.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TechCircular05-2022provisionofearthelectrodesearthing3_compressed.pdf
ATTACHMENT
GCC-2022_1.pdf
ATTACHMENT
GCCCorrectionSlips1to12_compressed.pdf
ATTACHMENT
RitesInspectionLetter.pdf
ATTACHMENT
pathradMSEDCL.pdf
ATTACHMENT
TenderNo31202627HLPFPARDandBMBE.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .