Renovation work in Arulmigu Seitharuleeswarar Thirukovil at Kappur Villupuram Tk Villupuram Dt

Amount

Providing Scaffolding for vimanam raja gopuram with non flammebable materials wherever necessary for main form work and by providing coconut keeth as covering the areas & plat form for inspection etc all complete.

Vimanam Height upto 15'-0"

Scrapping the decayed lime plaster from the surface of vimanam/gopuram. Care fully including isolated bricks or brick work without damaging the vari vargams, racking out the joints , cleaning the surface with water, including all working in heights-super ficial area including all folds -100 s.ft.

Clean removal of Lime plaster from Wall

Dismantling Lime Concrete

Labour Charges for Old Stone Removing

Labour Charges for Old Stone Removing

Dismantling the damaged Brick Masonry in lime mortar walls under 3m high

Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth, earth mixed with small sized boulders and hard gravelly soil as per SS 20B

Filling with foundation and basement with M sand in 15cm. Thick layers well rammed & consolidated, including watering, complying with std.specification etc complete.

Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Providing and laying in position, Standardised Concrete Mix M20 Grade in accordance with IS 456:2000 using 20mm and down graded hard broken granite stone jelly for all rcc works with minimumm cement content 325Kg/m3 and maximum water cement ratio of 0.55, including admixture(plasticiser/super plasticiser) in recommanded proportions as per IS 9103 to acclerate, retard setting of concrete, improve workability with out i paring strength and durability with about (5 cum) 7730 Kg of 20mm machine crushed stone jelly and with about (3.3 Cum) 5156 Kg of 10 12mm machine crushed stone jelly and with about (4.79cum) 7670 Kg of sand, but excluding cost of reinforcement grill and fabrication charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing etc and providing fixtures like fan clamps in RCC floor/ roof slabs wherver necessary without claming extra complete complying std specification and also directed by departmental officers. The coarse and fine aggregates to be used should comply with requirements of IS standards(No Seperate payment will be made by the department for excess usage of materilas).

for Sub structure

for Super structure

Centering for soffits of reinforced cement concrete slabs, plain surface including strutting 3 meter height using MS plates of size 90cmx60cm and 10 gauge stiffen and with welded mild steel angles of size 25x25x3mm laid over silver oak

For basement

For Column

Supplying and Fabricating and placing in position MS Steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire.

Ornamental Brick work in Lime Mortar 1:2 mix using Heritage brick 8"x4"x2" all vari vargams, moulds, sthambas,mukapatram,koodu,nasi,and all ornamental brick workcomplete panchavarnam agaraies, karnakoodus etc forming core walls rajagopuram/vimanams complete in cluding cement al labour chagers

Providing vargapoochu over the core walls of vimanams/Gopurams,with Lime MORTAR 1:2 complete including Shaping the mukhapathram, mahanasi, koodu all ornamental works to proper shape by embedding broken bricks of shaped/chiseled bricks , rough plastering with Lime MORTAR 1:2 and finshing with final ornamental plastering nayam theervani including cost and conveyance of all materials, labour there fore lifting of materials, all working in heights curing with water etc complete including all extra for folding and including clearing from the vimanams/gopurams 100 sft superficial area for kalkaram.

For kalkaram

for Vimanam

Plastering with Lime Mortar 1:1.5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc

Plastering with Cement Mortar 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc

Providing new sudhai vigrahams in the vimanams and rajagopurams with copper iron rod Reinforecement of suitable dia with binding wires wherever necessary, shapping the core with broken bricks set in Combination mortor 1:1.3 finishing the same with Combination mortor 1:1.3 bringing to the correct shape (lakshana) in conformist with silpa sastra inclusive of specials ornaments, weapons,peedam etc., complete and providing C.M nayam theervai wherever necessary inclusive of cost and conveyance of all materials, such as cement broken bricks, and copper rods binding wire all labour for working in heights curing lifting of materials including cement painting 2 coats over a primary coat etc complete as per standard specification Sudhai size above 2'-6" to 3'-6"

Supply of New cut stone for carrying out Garpagraham, Arthamandapam, Maha Mandapam, Thirumathil and other Temple Structures upto 10 feet length

1. Pillar (SOR - UC: M-2273 pg no 172)

2. Nilaikal -Door Frame (SOR - UC: M-2276 pg no 172)

Labour Charges for dressing and fixing of New cut stone of various stages

1. Pillar

2. Nilaikal

Labour Charges for Old Stone Fixing ( SOR - UC: W- 0219 of Pg No 173)

Providing brick work in Cement Mortar 1:5 mix using country bricks 83/4"x41/4"x23/4" size inculding curing, scaffolding etc. complete complying with std. specification

Paving with cut stone flooring using cut stone of size600x600mm and 100mm thick and all the sides are machine cutting, top surface is neatly dressed and pointing with lime mortar 1:1.5 including all materials and labour charges.

Single Line dressing

Three Line dressing

Restoration by providing herbal water wash and approrimats methodology to restore the originalities of the existing granite structure inclusive of hire charges scaffolding arrangements conveyance charges for tools & plants and machinaries to the workship spot and cleaning the site after completion of work etc

Pointing with Lime mortar 1:1.5 including all tools and plants and labour etc., all complete

Weathering course with brick jelly lime concrete using 20mm brick jelly with pure slacked lime over R.C.C. roof slab in the proportion of 32:12.5 and well watering consolidated with wooden beaters to slop including cost and conveyance of materials to site and labour charges etc complete for 10Cum

Finising the top of the roof with one course of pressed tiles of size 20X20X2cm over a bed of Lime mortor 1:1.5 12mm thick mixed with water proof compound at 2% b weight of lime including cost and conveyance of all materials to site and all labour charges etc

Painting two coats over the new plastered surface with water based Egavarnam paint including the labour and materials charges etc complete complying the std speicification.

Supplying and fixing teak wood temple type door including all materials, labour charges for manufacturing and fixing I position including all furniture fittings etc complete with std specifications.

Painting two coats over new wood works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete

Painting two coats for new iron works over the one coat of primer such as iron bars flats and other similar works etc, complete complying with std specification

Supplying and fixing MS grills to window and ventilator including the cost of necessary scrub and applying priming cost paint etc., complete.

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module GI switch box on wall with 6A one way module switch with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 5 points / Coil) Higher End (S D 287 )

Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End (S D 462)

Supply and fixing of single box type 1 x 20 W single LED fitting complete with TW round blocks on wall or ceiling with bulb with PVC unsheathed Copper leads from terminals to the fitting. (Data A)

Supply and fixing of fancy glass shade and 9 W LED for BH point. (Data B)

supply and fixing of 30W LED street light fitting with LED (Lower end) with 25mm dia. GI pipe (class B) with 1 no.25mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting . (S D 534)

Supply and fixing of 3 nos.6A two module 5 pin socket , 3 nos. 6A one module switch on suitable module surface mounting Box ( GI ) with module cover plate (plastic) on wall with connections. Higher End (SD 474 )

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End ( SD 486 }

Supply and laying of 2 x 6 sq.mm PVC armoured LTUG copper cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. (Data C )

Supply and clamping of 2 x 6 sq.mm PVC LTUG armoured copper cable in on post or on wall with MS Clamps. (Data D )

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End (SD 609 )

Supply and run of 2 x 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains. (SD 66 )

Supply and run of 2 x 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 32mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron up right and end supports for mains. ( SD 71)

Supply and fixing of powder coated MS BOX on wall fabricated with MS sheet of 16 gauge of size 600 mm x 300mm x 300mm with , 1 no. of 32ADP main switch with 32A por Fuse unit Neutral link & Earth link for provision for fixing TNEB meter on 15 mm tick Hylum sheetof size 600x300 mm with electrical connections complete. (Data E )

Supply and fixing of 32 A double pole changeover switch with suitable angle iron frame work with MS cable Inner praharam boxes with earth connection only. (Data F )

Earthing as per the PWD standard with an earth electrode of 2mt class 'B' GI pipe of dia not less than 32mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. (SD 234)

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection (S D 458 )

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour (SD 56)

Supply and fixing of brass cable gland for 2 x6 sqmm PVC armoured LTUG cable with earth connection. (SD 181 )

sub total

R RAJASEKARAN (BID ID -1330149)