Construction of Modern Fruit and Vegetable Market Yard at Shilaroo, Distt. Shimla, HP.

Amount

NEW BUILDING :- Excavation in foundation and trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the engineer -in-charge at site., according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (To be arranged by the contractor) as per satisfaction of Engineer- in -charge through all modes of transportation including head load ,animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation and used /removed as per the direction of the Engineer - in- charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respect including all incidental charges.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing form work with steel plates 3.15mm(three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in foundation, footing, basis of column etcetra . and mass concrete complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings , shelves and the like floor etcetra . upto any thickness upto all floor level as per HP.PWD. specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals.. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Beams, cantilevers, girders and lintels, sides of soffits of beams, beams haunchings, girders, cantilevers, bressumers and lintels upto any depth /heights upto all floor level as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Columns, pillars post and struts (square rectangular or polygonal in plan in any heights / thickness/depths etcetera upto all foor level as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Columns, pillars post and struts (CIRCULAR OR CURVED in plan in any heights / thickness/depths etcetera upto all foor level as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in stair cases with sloping or stepped soffits excluding landings in all floor level in all heights as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work edges of slab and breaks in floor and wall under 20 cm. wide as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work Vertical surface such as wall of any thickness as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and laying cement concrete 1:3:6 (One cement : three sand : six crushed stone aggregate 40mm ( Forty millimeter) nominal size) mechanically mixed and vibrated in Foundation and plinth including curing and cost of form work complete with carriage of materials labour ,tool and plants through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and laying cement concrete 1:3:6 (One cement : three sand : six crushed stone aggregate 40mm ( Forty millimeter) nominal size) mechanically mixed and vibrated in Walls including attached buttresses, pilasters and their caps and bases and string courses etc. upto floor two level including curing and cost of form work complete with carriage of materials labour ,tool and plants through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and laying plain cement concrete 1:4:8 (one cement; four sand : eight graded crushed stone aggregate 40mm(forty millimeters) nominal size mixed and vibrated mechanically and curing complete in or under water including pumping or bailing out water / dewatering removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/ heights as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government..

Providing and laying cement concrete 1:6:12 (One cement : six sand : twelve crushed stone aggregate 40 mm (Forty millimeter) nominal size) mechanically mixed and vibrated, curing complete excluding cost of form work in foundation and plinth and as per HP. PWD. specifications of 1990 volume-I. including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and laying RCC design mix M-25 to give smooth and even surface including (stone aggregates 20 mm nominal size) (Twenty millimeter nominal size) mechanically mixed and vibrated, curing complete excluding cost of form work and reinforcement for reinforced concrete work and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge in Foundation, footings bases of columns etc. and mass concrete. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying RCC design mix M-25 to give smooth and even surface including (stone aggregates 20 mm nominal size (Twenty millimeter nominal size) mechanically mixed and vibrated, curing complete excluding cost of form work and reinforcement for reinforced concrete work and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge in columns, pillars, posts and struts. Square, rectangular or polygonal in plan, in all floor level in all heights.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying RCC design mix M-25 to give smooth and even surface including (stone aggregates 20 mm nominal size(Twenty millimeter nominal size) mechanically mixed and vibrated, curing complete excluding cost of form work and reinforcement for reinforced concrete work and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge in suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor all level. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and laying RCC design mix M-25 to give smooth and even surface including (stone aggregates 20 mm nominal size (Twenty millimeter nominal size) mechanically mixed and vibrated, curing complete excluding cost of form work and reinforcement for reinforced concrete work and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge in stair cases with sloping or stepped soffits excluding landings in all floor level in all heights. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and laying RCC design mix M-25 to give smooth and even surface including (stone aggregates 20 mm nominal size (Twenty millimeter nominal size) mechanically mixed and vibrated, curing complete excluding cost of form work and reinforcement for reinforced concrete work and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge in vertical walls (any thickness but not less than 0.10m) attached pilasters, buttresses, plinth and string courses etc from top of foundation in all floor level in all heights. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing Tor/TMT steel reinforcement of TATA tiscon / SAIL / Rashtria Ispat /Jindal or its equivalent including cost of binding wire for R.C.C.work including bending, binding and placing in position complete in all floor level in all heights,and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and laying brick work using Second class common burnt clay building bricks in super structure above plinth level in all floors up to all heights and levels in cement mortar 1:6(One cement isto Six sand) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Providing and laying second class half brick masonry in common burnt clay building bricks in super structure in all levels and all heights with cement mortar 1:4 (One cement : 4 sand) and curing complete including carriage of materials labour ,tool and plants through all modes of transportation as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and laying Brick work using machine made buiding bricks laid with forming horizontal and vertical grooves 10mm wide 12mm deep during laying in super-structure above plinth level upto all floor level upto all heights and levels in :- Cement Mortar 1:3 First class Bricks (outer surface shown in drawings)and curing complete including carriage of materials labour ,tool and plants through all modes of transportation as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and laying Random rubble masonry / polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (One cement : six sand : twelve crushed stone aggregate 20mm (Twenty millimeter nominal size) at plinth level in Cement Mortar 1:6 (One cement: six sand) and curing complete including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Stone soling tightly hand packed under floors, including watering, ramming and consolidating complete and carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and fixing anodised aluminium work for door, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make confirming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, straight, mitred and jointed mechanically where ever required including cleats angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws as per Architectural drawings and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . a) For frames of windows and ventilators and glazed partitions.

Providing and fixing anodised aluminium work for door, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make confirming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, straight, mitred and jointed mechanically where ever required including cleats angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws as per Architectural drawings and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government a) For shutters of doors windows and ventilators including providing and fixing hinges/pivots and making Provisions for fixing of fittings where ever required including the cost of PVC/ neoprene gaskets as required (fittings and glazing/ panelling shall be paid for separately)

Providing and fixing powder coated aluminum sliding door bolts dyed to required colour and shade with bolts and nuts screws etc. complete :-as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . a)250×16mm (Two hundred fifty into sixteen millimeter)

Providing and fixing powder coated aluminium tower bolts (barrel type) dyed to required shade and colour with nut, bolt, screws etc. complete as per HPPWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . a)200 x 10 mm (two hundred into ten millimeter)

Providing and fixing powder coated aluminium tower bolts (barrel type) dyed to required shade and colour with screws etc. complete as per HPPWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . a)150x10 mm ( one hundred into ten millimeter )

Providing and fixing powder coated aluminium handles dyed to required colour or shade with necessary screws etc. complete as per HPPWD Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . a)125 mm (one hundred twenty five millimeter)

Providing and fixing powder coated aluminium handles dyed to required colour or shade with necessary screws etc. complete as per HPPWD Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . a)100 mm (one hundred millimeter)

Providing and fixing powder coated aluminium handles dyed to required colour or shade with necessary screws etc. complete as per HPPWD Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . a)75 mm (seventy five millimeter)

Providing and fixing Overhead hydraulic door closer of approved brand and manufacuture of I.S.I mark for doors as par H.P. PWD sapecfication 1990 Vol. 1 including carriage of all labours equiptment and material to various location through all modes of transportation in all leads and lift includig all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and fixing 100mm bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness completeas as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing and fixing 150mm(one hundred fifty milimeter powder coated aluminium hooks and Eyes of 6mm (six milimeter) dia with necessary screws etc. complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.`The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing Prelaminated board bwp phenol bonded exterior/interion grade both sides. 12mm thick of approved make conforming to IS:12823 Grade I type II, in panelling fixed in aluminium door, windows, shutterd and partation frame with CP brass/ stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in charge including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) Pre- laminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.)Glazing with glass panes of 6 mm(six milimeter) thick-ness (weight not less than 15kg/ sqm.(thirteen point ten kilgramme per squaremeter as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One) including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.)Glazing with glass panes of 4 mm(four milimeter) thick-ness (weight not less than 10kg/ sqm.(thirteen point ten kilgramme per squaremeter as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One) including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing all weather proof ACP imported sign panel all weather proof multi colour computerised reflective digitat panel 3mm thick, mounted on powder coated G.I frame work fixed/hanging with wall or ceiling etc. with specified clamps and G.I. wires and rawl plugs etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and fixing M.S. grills of required pattern in steel frame of windows etc. with M.S. flats, square or round bars with round headed bolts and nuts or by screws : Plain grills including carriage of all labours equiptment and material to various location through all modes of transportation in all leads and lift includig all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and laying 25 mm (Twenty five milimetre) thick mirror polished Kota stone slab flooring with 20mm (twenty milimetre ) thick base of cement mortor 1:4 (one cement is to four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge..The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and laying 40 mm (forty milimetre) thick mirror polished Kota stone slab flooring with 20mm (twenty milimetre ) (table rubbed and polished) of size thick base of cement mortor 1:4 (one cement is to four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge..The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and laying Kota stone (Table rubbed and polished) slab 25mm(twenty five milimeter)thick mirror polished in risers of steps, skirting dado and pillars laid on 12mm(twelve milimeter) (average) thick cement mortar 1:3(one cement:three sand) and jointed with grey cement slurry fixed with pigment to match the shade of the slabs i/c preparing of nosing i/c rubbing and granite polish finish as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying Duro stone vetrified tiles (300x300mmx10mm(three hundred into three hundred into ten milimeter) in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm(twelve milimeter) thick cement mortar 1:3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges. The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing and laying white / coloured glazed tiles of 8mm (eight milimeter) thick in skirting riser of steps and dado on 12mm (twelve milimeter) thick cement mortar 1:3(one cement:three sand) (300x600mm size ) and jointed with cement slurry complete in all floors and heights as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One),including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.`The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Making half round nosing to Kota stone/granite stone/ marble complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.charges.`The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and laying Granite stone (table rubbed and polished for walls lining) Veneer work 2.0cm. thick in cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade : 1:3 (1 cement:3 sand) including pointing with white cement mortar complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.charges.`The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and laying Baroda Green Marble In flooring 20mm (average) thickness base of cement mortar 1:3 (1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. up-to all lead and lifts 20mm.thick complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.charges.`The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing 0.60mm thick prepainted steel sheet of TATA Durashine or its equivalent in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia metre with prepainted limpet and rubber washers complete with all accessories as required as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Providing and fixing ridges or hips 60 cm over all with 0.45mm thick prepainted steel sheets of TATA DURASHINE or its substantial equivalent make in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating+ back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6 mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Providing and fixing valley 90 cm over all 0.45 mm thick prepainted steel sheet of TATA DURASHINE or its substantial eqivalent make in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia with prepainted G.I. limpet and bitumen whashers complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Providing and fixing thick 30cm wide 120cm overall box type plain G.I. sheet gutter with iron brackets 40*3mm 0.63mm(Zero decimal six three milimeter) plain G.I. sheet of TATA Durashine or its equivalent gutter with bolts and nuts and washers etc. including making conection with rain water pipe complete as per design including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) 0.63 mm thick sheet

Providing and fixing flushing 38 cm overall with 0.45mm thick prepainted steel sheets of TATA DURASHINE or its equivalent in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Providing and fixing M.S. B.P. sheet 2 mm thick in eaves board / facia / soffits / ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete (Base members of steel work shall be measured & paid separately) as per HP. PWD. Specifications of 1990 vplume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Providing and fixing 150mm(one hundred fifty milimeter) dia pipes on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm(four point five kilogramme per square mete. including filling the joints with approved adhesive complete.as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing PVC on wall faces PVC accessories for rain water pipes including filling the joints with approved adhesive complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) Plain bend 150mm dia.

Providing and fixing PVC on wall faces PVC accessories for rain water pipes including filling the joints with approved adhesive complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) PVC shoe 150mm dia

Providing and fixing 150mm dia M.S. sheet clamps 40x3mm for PVC pipes with steel screws and rawl plugs complete including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts as per direction of Engineer-in- Charge. The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Providing and fixing 150mm dia PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials through, labour tool and plants all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Providing & laying steel work of TATA,SAIL or RASHTRIYA ISPAT or its substantial equivalent make welded in built up section/ hollow section trusses & framed work, including cutting,hoisting & fixing in position including applying a priming coat of red lead paint in beams joists channels, angles, tee,flats with connecting plates or angle cleats as in main and cross beams, hip and rafters,purlins connected to common rafters and the like as per HP. PWD. Specifications of 1990 vplume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment. a) In beam joists channels, angles tee, flats with connection plates or angle cleats as in main and cross beems, hip and jack rafters, purlins connected to common rafters and like..

Providing & laying steel work of TATA,SAIL or RASHTRIYA ISPAT or its equivalent welded in built up section/ hollow section trusses & framed work, including cutting,hoisting & fixing in position including applying a priming coat of red lead paint in beams joists channels, angles, tee,flats with connecting plates or angle cleats as in main and cross beams, hip and rafters,purlins connected to common rafters and the like as per HP. PWD. Specifications of 1990 vplume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) In grating,framed guards,bars ladders,railing brackets and similar works.

Providing and fixing moulded hand rail of M.S. hollow pipe 50mm(fifty milimeter) dia welded in straight lenght over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be mesaured & paid separetely as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Supplying and fixing rolling shutter of approved make of 80mm x 1.25mm MS laths inter- locked together through their entire length and joined together at the end by end locks mounted on brackets side guides and arrangements for inside and out side locking with push pull operation complete but excluding the cost of the top cover and spring.. as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government a) Shutter having width below 3.50 meters.

Providing and fixing ball bearing for rolling shutters complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing top cover for rolling shutters. Shutters having width above 3.5( three point five ) metre. complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing 27.5 centimeter long wire spring grade No.2 for rolling shutter complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Applying one coat of Acrylic primer (Spectrum or equivalent of Superior quality) on new concrete/masonry/plastered surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Painting two coats (excluding priming coat) on new concrete / masonary / plastered surfaces with synthatic enamel paint of approved shade / brand and manufacture to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stopping including carriage of materials within allleads and lifts. as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Painting two coats (excluding priming coat)on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the surface all dirt,dust and other foreign matter:- With readymixed paint white or other than white as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Finishing wall with weather proof exterior grade emulsion of approved design (Apex ultima) or its equivalent on undecorated wall surfaces (two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etc. including and papering smooth complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Distempering (two coats) with oil bound washable ditemper of approved brand and manufacture of and of required shade of undecorated ceiling/sloping surfaces to give an even shade over and including a priming coat with Alkali-resistance primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth. as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Distempering( two coats)with oil bound washable distemper of approved brand and manufacture and of orequired shade on undecodated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved branch and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

6 mm. (six milimeter) thick cement plaster in cement mortar 1:3(one cement : three sand) in ceiling an soffits of stairs as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

15mm (fifteen milimetres) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior plastering with cement mortar 1:6 (one cement isto six sand) upto all floor level including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

15mm (fifteen milimetres) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior plastering with cement mortar 1:6 (one cement isto six sand) upto all floor level including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying cement water proofing treatment with Dr. FIXIT-FAST-FLEX or equalent with two component polymer modified comentitious coating cosisting of comentitious powder and a polymer liquid in two coats for first coat clean and saturate surface and then applying a coat of Dr. FIXIT and the same process shall be extended upto 300mm (Three hundred milimeter) vertically the second coat shall be applied in opposite direction after four to six hours of application of first coat than sprinkle san on top surface of applied Dr. FIXIT then apply cement mortar 1:4(one cement:four sand) admixed with 200ml (Two hundred mililiter) of pidiproof LW @200ml (Two hundred mililiter) per 50(fifty) kilogram bag complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing Rubber Dock Bumper of size 150x150x75 mm D hollow, 1 m long per piece with required accessories complete as per the archietectural drawing and satisfaction of Engineer-in-charge as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

FENCING & PAVER BLOCKS, RETAINING WALL/CUTTING FILLING Clearing jungle including uprooting of rank vegetation, grass,brush wood, trees and saplings of girth upto 30 cm. measured at a height of 1 meter above ground and removal of rubbish up-to all lead and lifts and transportation of the unuseful materials on approved dumping sites( to be arranged by the contractor) through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and all labour, machineries, materials, tools equipments and safety measures and incidentials necessary to complete the work by mechanized means and labour (if any required) .Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Excavation in foundation and trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock, with chiseling and wedging out of rock;(where blasting is prohibited) and their intermediate classification of soils including ,dewatering including pumping or bailing out of water wherever required, setting out to required lines, levels as shown on the drawing and as directed by the Engineer-in- Charge at site, according to the H.P.PWD. specification of 1990 (One thousand Nine hundred Ninety) Volume-I and sorting out useful & unuseful materials and stacking the same in all leads and lifts and transportation of the unuseful materials on approved dumping sites ( to be arranged by the contractor) through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and all labour, machineries, materials, tools equipments and safety measures and incidentials necessary to complete the work by mechanized means and labour (if any required) . All usefull materials, such as stones, shingles, aggregate and slates shall be sorted to the maximum possible extent in all leads and lifts through all modes of transportation. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work Vertical surface such as wall of any thickness as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and laying plain concrete 1:3:6 (One cement isto three sand isto six graded crushed hard stone agreegate) 40 mm mechanically mixed, vibrated and curing complete includig form work in open foundation as per drawing and technical specification clause 802, 803, 1202 and 1203 (Eight hundred two, eight hundred three, one thousand two hundred two and ond thousand two hundred three). including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Steel work welded in built up sections of BIS specification, trusses and framed work, including cutting, hoisting in all heights and levels, fixing in position and applying a priming coat of red lead paint complete as per HPPWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) In single stanchions composed of of rolled steel joists or channeles with caps, bases splices,anglesbrackets etc.

Providing and fixing GI chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in- charge including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying cement concrete 1:2:4 (one cement isto two sand isto four crushed stone aggregate 20mm (Twenty millimeter) nominal size) mechanically mixed and vibrated, curing complete excluding cost of form work and reinforcement for reinforced concrete work.and as per HP. PWD. specifications of 1990 volume-I.including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. In string courses , copings, bed plates, anchor blocks, plain windows sills and the like Including carriage of materials within all leads and lifts and as per entire satisfaction of Engineer-in-charge.

Providing and laying cement concrete 1:2:4 (one cement isto two sand isto four crushed stone aggregate 20mm (Twenty millimeter) nominal size) mechanically mixed and vibrated, curing complete excluding cost of form work and reinforcement for reinforced concrete work.and as per HP. PWD. specifications of 1990 volume-I.including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.in vertical walls (any thickness but not less than 0.10m) attached pilasters, buttresses, plinth and string courses etc from top of foundation in all floor level in all heights. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and laying Stone work on plain Ashlar Cyclopean in superstructure upto floor two level including pointing with cement mortar 1:2 (1 cement :2 sand) in:- Cement Mortar 1:6 (1 cement : 6 sand) and as per HP. PWD. specifications of 1990 volume-I.including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge . The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Painting two coats (excluding priming coat)on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the surface all dirt,dust and other foreign matter:- With readymixed paint white or other than white as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

PAVER BLOCK:- Cutting in earth work in by mechanical means all heights and depths in all kinds of soils, including saturated soils comprising of pick work , Jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (Where blasting is prohibited) and their intermediate classification of soil including, dewatring where required, setting out to required lines, levels as shown on the drawing and directed by the Engineer-in - charge at site, according to the HP.PWD. specification of 1990( One Thousand Nine Hundred ninety) Volume-I (One) and sorting out useful and unuseful matreial and Transportation of the unuseful matreial for disposing at dumping site ( To be arranged by the Contractor) as per satisfacation of Engineer -in- Charge through all modes of transportation including head load , animal load or mechnical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechnical means and labour( If required). All useful material such as stone , shingles aggregate and slates Shall be properly Stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation as per direction of the Engineer -in -charge . The recovery for stones, weather useful or not, for the minimum quatom of 4223.91cubic meter @ Rupee 300/- Only (Rupees. Three hundred) per cubic meter Shall be effected on pro rata basis in all circumstances. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.

Providing and laying cement concrete 1:4:8 (one cement:four sand: eight graded stone aggregate 40mm(forty milimete) nominal size) and curing complete excluding cost of form work in foundation and plinth as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Stone soling properly hand packed filling interstics with spalls and consolidating with power road roller to the requested gradient and camber including spreading watering and rolling of binding materials moorum or earth etc. complete as per HP.PWD specification. 100mm spread thickness (finished work including materials and labour). including carriage of materials in all leads and lifts. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying heavy duty precast cement conrete inter locking paver blocks vibro compacted upto M-50 (M-Fifty) grade including border or kurb block grey or coloured over sub-base of concrete with 25mm ( twenty five millimeters ) thick average thickness of cement mortar 1:4 (one cement :four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing and polishing complete (Sub base concrete floor to be paid for separately) 80mm (eighty millimeters ) thick inter locking blocks as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying heavy duty precast cement conrete inter locking paver blocks vibro compacted upto M-50 (M-Fifty) grade including border or kurb block grey or coloured over sub-base of concrete with 25mm ( twenty five millimeters ) thick average thickness of cement mortar 1:4 (one cement :four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing and polishing complete (Sub base concrete floor to be paid for separately) 60mm (sixty millimeters ) thick inter locking blocks as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

RETAINING WALL:- Earth work in excavation for structures in all depths as per drawings and technical specification as per clause 305.1(three hundred five point one)of MORD specifications 300(three hundred)including setting out construction of shoring and tacing removal of stumps and other deleterious materials and disposal in all leads and lifts including dressing of sides and bottom and back filling in trenches with excavated suitable materials. All work of rock cutting by blasting shall be carried out taking all necessary precautions against soil erosion, damage to hill side, water pollution etc. and to protect stability of hill side rock shall be excavated with chiseling and weding out rock (where blasting is prohibited). All earth work in excavation excluding rock excavation shall be carried out true to lines, grades, sides slopes, width, camber, super elevation and level as down on the drawings. Disposal of surfaceable cut materials in specified manner on dumping site through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and all labour, machineries, materials, tools equipments and safety measures and incidentals necessary to complete. If the foundation of the structure is in an area with stagnant water or water is met with in the excavation due to spring seepage, rain and other causes shall be removed by suitable diversion, bailing out or dewatrering and the area of the foundation or embankment shall be kept dry. Any loss to the public and private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him at his own cost in all cases. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying plain cement concrete 1:4:8 (one cement; four sand : eight graded crushed stone aggregate 40mm(forty millimeters) nominal size mixed and vibrated mechanically and curing complete in or under water including pumping or bailing out water / dewatering removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/ heights as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government..

Providing and laying plain cement concrete 1:4:8 (one cement; four sand : eight graded crushed stone aggregate 20mm(twenty millimeters) nominal size mechanical mixed, vibrated and curing complete including form work in open foundation as per drawing and technical specification of MORD 800 & 1200(Eight hundred and one thousand two hundred)clause 802, 803, 1202 and 1203(Eight hundred two, eight hundred three, one thousand two hundred two and ond thousand two hundred three) including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing weep holes in brick masonry/stone masonry/plain reinforced concrete abutments, wing wall, return wall,with 100mm (One hundred millimeter) dia PVC pipe extending through the full width of the structures with slope of i(v):20(H) towards draining face complete as per drawing and technical specification clauses 614,709,1204.3.7,including carriage of materials through all modes of transportation with in all leads and lifts, and heights completerTimes New RomanTimes New Roman as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Back filling with granular material behind abutment, wing wall and return wall and retaining walls complete as per drawing & technical specification clause 1204.3.8:- Granular Material as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

ROAD WORK:- Cutting in earth work in by mechanical means all heights and depths in all kinds of soils, including saturated soils comprising of pick work , Jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (Where blasting is prohibited) and their intermediate classification of soil including, dewatring where required, setting out to required lines, levels as shown on the drawing and directed by the Engineer-in - charge at site, according to the HP.PWD. specification of 1990( One Thousand Nine Hundred ninety) Volume-I (One) and sorting out useful and unuseful matreial and Transportation of the unuseful matreial for disposing at dumping site ( To be arranged by the Contractor) as per satisfacation of Engineer -in- Charge through all modes of transportation including head load , animal load or mechnical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechnical means and labour( If required). All useful material such as stone , shingles aggregate and slates Shall be properly Stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation as per direction of the Engineer -in -charge . The recovery for stones, weather useful or not, for the minimum quatom of 108.61 cubic meter @ Rupee 300/- Only (Rupees. Three hundred) per cubic meter Shall be effected on pro rata basis in all circumstances. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.

Preparation of subgrade by dressing to camber complete as per H.P.P.W.D. specification and as per direction of Engineer-in-charge including carriage of materials within all leads and lifts and other incidental . The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Consolidation of subgrade with road roller with three wheel steel /vibratory 80-100KN including making good the undulations etc. with earth or quarry soil etc. and re-rolling the sub grade complete as per H P PWD specifications and as per directions of Engineer-in-charge including carriage of material within all leads and lifts and other incidential.

Construction of granular sub base by providing well graded materials, spreading in uniform layers with tractor mount grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with three wheel KN static of 80/100 (eighty / hundred) roller to achieve the desired denisity, complete as per technical specification clause 401 for grading 1 material with in all leads & lifts of material The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government and as per entire satisfaction of Engineer-in-Charge.

Providing laying spreading and compacting by manual and mechanical means stone aggregate size 63mm to 45mm ( sixty three millimeter to forty five millimeter) Grading-II[75mm( seventy five millimeters) consolidated thick] to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 K.N. static roller in stages to proper grade and camber, applying and brooming, stone screening type-B of size 11.2mm (Eleven point two milimetre) nominal size at the rate of 0.20 cum (zero point two zero cubic mater) per ten square metre and binding material at the rate of 0.06 cum (Zero point zero six cubic metre) per ten square metre and to fill up the interstices of coarse aggregate, watering and compacting to the required density as per M.O.R.D. technical specifications clause No. 405 and to the entire satisfaction and direction of Engineer - in- Charge including carriage of material with in all leads and lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing, laying, spreading and compacting by manual and mechanical means stone aggregate size 53mm to 22.4mm ( fifty three millimeter to twenty two point four millimeter) Grading-III [75mm( seventy five millimeters) consolidated thick] to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 K.N. static roller in stages to proper grade and camber, applying and brooming, stone screening type-B of size at 11.2mm (Eleven point two milimetre) nominal size at the rate of 0.18 cum (zero point one eight cubic metre) and binding material 0.06 cubic metre ( zero point zero six cubic metre) per ten square metre to fill up the interstices of coarse aggregate, watering and compacting to the required density as per M.O.R.D. technical specifications clause No. 405 and as per entire satisfaction directions of Engineer - in- Charge including carriage of materials within all leads and lifts and other incidental . The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying of M50 grade concrete interlocking pre polished concrete block pavements having thickness 80mm (eighty milimetres) as per drawing and Technical Specification Clause-1504 within all leads, lifts of materials and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

RETAINING WALL:_ Earthwork in excavation for all types of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetera in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock, chiseling /wedging out of rocks ( Where blasting is prohibited) as per drawings and technical specification clause 305.1 and as per direction of the Engineer- in – Charge including setting out, shoring and bracing , removal of stumps and other deleterious materials and disposal of materials upto any lead and upto any lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm ( one hundred fifty millimeters) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arrise out during dewatering as per direction of the Engineer-in-Charge. Including carriage of materials within all leads and lifts and other incidental .

Providing and laying plain cement concrete 1:4:8 (one cement; four sand : eight graded crushed stone aggregate 40mm(forty millimeters) nominal size mixed and vibrated mechanically and curing complete in or under water including pumping or bailing out water / dewatering removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/ heights as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government..

Providing and laying plain cement concrete 1:4:8 (one cement; four sand : eight graded crushed stone aggregate 20mm(twenty millimeters) nominal size mechanical mixed, vibrated and curing complete including form work in open foundation as per drawing and technical specification of MORD 800 & 1200(Eight hundred and one thousand two hundred)clause 802, 803, 1202 and 1203(Eight hundred two, eight hundred three, one thousand two hundred two and ond thousand two hundred three) including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and laying weep holes in brick masonry/ stone masonry, plain/reinforced concrete abutment, wing walls, return walls and breast /retaining walls with 100 mm (One hundred millimeter) dia PVC pipe extending through the full width of the structures with slope of 1 (one) vertical: 20 (twenty) horizontal towards drawing face complete as per drawing and technical specifications clause 614, 709, 1204.3.7 and as per direction of Engineer - in- Charge including carriage of materials within all leads and lifts and other incidentals . The rate including of octroi, royality, Malkana, tolltax, sale tax or other taxes imposed by the government.

METAL BEAM CRASH BARRIER :- Earthwork in excavation for all types of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetera in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock, chiseling /wedging out of rocks ( Where blasting is prohibited) as per drawings and technical specification clause 305.1 and as per direction of the Engineer- in – Charge including setting out, shoring and bracing , removal of stumps and other deleterious materials and disposal of materials upto any lead and upto any lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm ( one hundred fifty millimeters) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arrise out during dewatering as per direction of the Engineer-in-Charge. Including carriage of materials within all leads and lifts and other incidental .

Providing and laying plain cement concrete 1:4:8 (one cement; four sand : eight graded crushed stone aggregate 40mm(forty millimeters) nominal size mixed and vibrated mechanically and curing complete in or under water including pumping or bailing out water / dewatering removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/ heights as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government..

Providing and laying mechanically mixed and vibrated plain cement concrete in sub structure for all types of structure of cement concrete of grade M-20 (M- Twenty) nominal mix 1:2:4 (One cement is to two sand is to four graded crushed/ broken stone aggregate 40mm (Forty milimetre) nominal size and curing complete including the cost of form work in abutment extra complete as per drawings and technical specification clause 802, 804, 805, 806, 807, 1202 & 1204 and as per the direction of Engineer-in-charge including carriage of materials within all kinds of leads, lifts and other incidental. The rate including octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government

P/F single sided Single W -Metal Beam Crash barrier with post spacing 2000mm c/c with overlap of not less than 318 mm at every alternate post with W-Beam of 3.0 mm thick cold roll formed ‘W’ profiled section of 312mm x 83mm and 4318mm long, Post: Cold Rolled Formed C” Channel 150x75x75x5.0 mm thick. 1800mm Long, Spacer: Cold Rolled Formed C” Channel 150x75x75x5.0 mm Thick 330mm Long, Foundation: Post directly embedded in PCC of size dia 350x350x1100 ( AS PER YOUR DRAWING), Galvanizing and punching: All the sections like post, spacers and W- Beam will be supplied with pre-punched slots in ready to erect condition. All the sections supplied shall be Hot Dip Galvanized (Coating 550 GSM), Raw Material: The raw material (HR Coil) for W-Beams post and spacer confirm to Fe 410/Fe 360 or equivalent. Thickness tolerance as per IS-1852 clause(+0.1mm/-0.25mm)

CHECK POST & WEIGH BRIDGE R0OM:- Excavation in foundation and trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the engineer -in-charge at site., according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (To be arranged by the contractor) as per satisfaction of Engineer- in -charge through all modes of transportation including head load ,animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation and used /removed as per the direction of the Engineer - in- charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respect including all incidental charges.

Providing form work with steel plates 3.15mm(three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in foundation, footing, basis of column etcetra . and mass concrete complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings , shelves and the like floor etcetra . upto any thickness upto all floor level as per HP.PWD. specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals.. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Beams, cantilevers, girders and lintels, sides of soffits of beams, beams haunchings, girders, cantilevers, bressumers and lintels upto any depth /heights upto all floor level as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Columns, pillars post and struts (square rectangular or polygonal in plain in any heights / thickness/depths etcetera upto all foor level as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and laying cement concrete 1:6:12 (one cement: six sand: twelve graded stone aggregate 40mm nominal size) excluding cost of centring and shuttering in:-Foundations and plinth as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying cement concrete 1:1.5:3 (one cement isto one point five sand isto three crushed stone aggregate 20mm. (Twenty millimeter) nominal size) mechanically mixed and vibrated, curing complete excluding cost of form work and reinforcement for reinforced concrete work and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. in Foundation, footings bases of columns etc. and mass concrete.

Providing and laying cement concrete 1:1.5:3 (one cement isto one point five sand isto three crushed stone aggregate 20mm. (Twenty millimeter) nominal size) mechanically mixed and vibrated, curing complete excluding cost of form work and reinforcement for reinforced concrete work and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. in columns, pillars, posts and struts. Square, rectangular or polygonal in plan, in all floor level in all heights.

Providing and laying cement concrete 1:1.5:3 (one cement isto one point five sand isto three crushed stone aggregate 20mm. (Twenty millimeter) nominal size) mechanically mixed and vibrated, curing complete excluding cost of form work and reinforcement for reinforced concrete work and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. in suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor all level.

Providing Tor/TMT steel reinforcement of TATA tiscon / SAIL / Rashtria Ispat /Jindal or its equivalent including cost of binding wire for R.C.C.work including bending, binding and placing in position complete in all floor level in all heights,and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying brick work using Second class common burnt clay building bricks in super structure above plinth level in all floors up to all heights and levels in cement mortar 1:6(One cement isto Six sand) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Providing and laying second class half brick masonry in common burnt clay building bricks in super structure in all levels and all heights with cement mortar 1:4 (One cement : 4 sand) and curing complete including carriage of materials labour ,tool and plants through all modes of transportation as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Stone soling tightly hand packed under floors, including watering, ramming and consolidating complete and carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing anodised aluminium work for door, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make confirming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, straight, mitred and jointed mechanically where ever required including cleats angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws as per Architectural drawings and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) For frames of windows and ventilators and glazed partitions.

Providing and fixing anodised aluminium work for door, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make confirming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, straight, mitred and jointed mechanically where ever required including cleats angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws as per Architectural drawings and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government a) For shutters of doors windows and ventilators including providing and fixing hinges/pivots and making Provisions for fixing of fittings where ever required including the cost of PVC/ neoprene gaskets as required (fittings and glazing/ panelling shall be paid for separately)

Prelaminated board bwp phenol bonded exterior/interion grade both sides. 12mm thick conforming to IS:12823 Grade I type II, in panelling fixed in aluminium door, windows, shutterd and partation frame with CP brass/ stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in charge including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) Pre- laminated particle board with decorative lamination on both sides.

Providing and fixing powder coated aluminum sliding door bolts dyed to required colour and shade with bolts and nuts screws etc. complete :-as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. 250×16mm (Two hundred fifty into sixteen millimeter)

Providing and fixing powder coated aluminium tower bolts (barrel type) dyed to required shade and colour with screws etc. complete as per HPPWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a)200 x 10 mm (two hundred into ten millimeter)

Providing and fixing powder coated aluminium tower bolts (barrel type) dyed to required shade and colour with screws etc. complete as per HPPWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a)150x10 mm ( one hundred into ten millimeter )

Providing and fixing powder coated aluminium handles dyed to required colour or shade with necessary screws etc. complete as per HPPWD Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. 125 mm (one hundred twenty five millimeter)

Providing and fixing powder coated aluminium handles dyed to required colour or shade with necessary screws etc. complete as per HPPWD Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. 100 mm (one hundred millimeter)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.)Glazing with glass panes of 4 mm(four milimeter) thick-ness (weight not less than 13.10 kg/ sqm.(thirteen point ten kilgramme per squaremeter as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One) including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and laying mirror polished Kota stone slab flooring 25 mm (twenty five milimeter) (table rubbed and polished)of size 550x550mm(five hundred fifty into five hundred fifty milimeter) (average) 20mm thick base of cement mortor 1:4 (one cement :four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. including rubbing and polishing complete.treling the surface with bee waz as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing & laying steel work of TATA,SAIL or RASHTRIYA ISPAT or its substantial equivalent make welded in built up section/ hollow section trusses & framed work, including cutting,hoisting & fixing in position including applying a priming coat of red lead paint in beams joists channels, angles, tee,flats with connecting plates or angle cleats as in main and cross beams, hip and rafters,purlins connected to common rafters and the like as per HP. PWD. Specifications of 1990 vplume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment. a) In beam joists channels, angles tee, flats with connection plates or angle cleats as in main and cross beems, hip and jack rafters, purlins connected to common rafters and like..

Providing and fixing 0.60mm thick prepainted steel sheet of TATA Durashine or its equivalent in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia metre with prepainted limpet and rubber washers complete with all accessories as required as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Providing and fixing ridges or hips 60 cm over all with 0.45mm thick prepainted steel sheets of TATA DURASHINE or its substantial equivalent make in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating+ back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6 mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Providing and fixing M.S. B.P. sheet 2 mm thick in eaves board / facia / soffits / ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete (Base members of steel work shall be measured & paid separately) as per HP. PWD. Specifications of 1990 vplume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

6 mm. (six milimeter) thick cement plaster in cement mortar 1:3(one cement : three sand) in ceiling an soffits of stairs as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

15mm (fifteen milimetres) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior plastering with cement mortar 1:6 (one cement isto six sand) upto all floor level including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

15mm (fifteen milimetres) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior plastering with cement mortar 1:6 (one cement isto six sand) upto all floor level including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Distempering (two coats) with oil bound washable ditemper of approved brand and manufacture of and of required shade of undecorated ceiling/sloping surfaces to give an even shade over and including a priming coat with Alkali-resistance primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth. as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Distempering( two coats)with oil bound washable distemper of approved brand and manufacture and of orequired shade on undecodated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved branch and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on decorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete. as per HPPWD Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

ESMP COMPONENT:- Excavation in foundation and trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the engineer -in-charge at site., according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (To be arranged by the contractor) as per satisfaction of Engineer- in -charge through all modes of transportation including head load ,animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation and used /removed as per the direction of the Engineer - in- charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respect including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Excavation in drains and channels etcetera in earth work in all kinds of classification of soil such as pick work, jumper work, pick jumper work. blasting work , jumper blasting work,soft and hard blasting and doing work in saturated soil including chiseling or wedging out rock where blasting work is prohibited or any other mixed variety of soil including shoring, strutting dewatering and pumping or bailing out water ( surface and sub soil water ) upto any depth or any quantum of water including slush which may arise during dewatering, removal of slush and stacking the serviceable and unserviceable material clear from the edges of excavation and then returning the stacked soil in 15 cm ( fifteen centimeters ) layers when required into plinths and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus unserviceable excavated earth as per HP.PWD. specifications,approved drawings, designs as per the entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Filling in plinth with sand under floor including watering, ramming ,consolidating and dressing complete as per HP.PWD. specifications, approved drawings, designs as per the entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in foundation, footing, basis of column etcetra . and mass concrete complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work Vertical surface such as wall of any thickness as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and laying cement concrete 1:4:8 (1 cement: 4 sand: 8 graded stone aggregate 40 mm nominal size) mixed and vibrated mechanically and curing complete in or under water including pumping or bailing out water /dewatering removal of slush wich may arise at the time of laying under water complete excluding the cost of form work in foundation and in plinth in all depths /heights as per HPPWD specifications, approved drawings, designs as per the entire satisfaction and erection of the engineer in-charge including carriage of materials with all leads and lifts and other incidentals. The rate including of actroi, royalty, malkana, toll tax, sale tax or other taxes imposed by government.

Providing and laying cement concrete 1:1.5:3 (one cement isto one point five sand isto three crushed stone aggregate 20mm. (Twenty millimeter) nominal size) mechanically mixed and vibrated, curing complete excluding cost of form work and reinforcement for reinforced concrete work and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge in Foundation, footings bases of columns etc. and mass concrete.

Providing and laying cement concrete 1:3:6 (One cement : three sand : six crushed stone aggregate 40mm ( Forty millimeter) nominal size) mechanically mixed and vibrated in Walls including attached buttresses, pilasters and their caps and bases and string courses etc. upto floor two level including curing and cost of form work complete with carriage of materials labour ,tool and plants through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and laying damp proof course 50 mm thick with cement concrete 1:2:4 (1 cement:2 sand:4 graded stone aggregate 20mm nominal size) and curing complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing Tor/TMT steel reinforcement of TATA tiscon / SAIL / Rashtria Ispat /Jindal or its equivalent including cost of binding wire for R.C.C.work including bending, binding and placing in position complete in all floor level in all heights,and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing & laying steel work of TATA,SAIL or RASHTRIYA ISPAT or its equivalent welded in built up section/ hollow section trusses & framed work, including cutting,hoisting & fixing in position including applying a priming coat of red lead paint in beams joists channels, angles, tee,flats with connecting plates or angle cleats as in main and cross beams, hip and rafters,purlins connected to common rafters and the like as per HP. PWD. Specifications of 1990 vplume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) In grating,framed guards,bars ladders,railing brackets and similar works.

Brick work using Second class common burnt clay building bricks in foundation & plinth in cement mortar 1:6(one cement into six sand) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Brick work using Second class common burnt clay building bricks in foundation & plinth in cement mortar 1:4(one cement : four sand) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Brick work using Second class common burnt clay building bricks in super structure above plinth level in all floors up to all heights and levels in cement mortar 1:6(One cement isto Six sand) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing woodwork in frames of door window, clearstory, windows and other frames wrought , framed and fixed in position as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government a) kail wood (second class)

Providing and fixing flush door shutter interior grade , commericial type, core of black board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains of cross bend and face veneers on both faces of shutter as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . a) 30mm thick

Providing 40x3 mm flat iron hold fast including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. 1:3:6 ( 1 cement : 3 sand: 6 graded stone aggregate 20mm nominal size) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing chromium plated / MS sliding door bolts with nuts and screws etcetra as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government a) 250x16mm.(Two hundred fifty into sixteen milimetres )

Providing and fixing powder coated aluminium tower bolts (barrel type) dyed to required shade and colour with screws etc. complete as per HPPWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) 150x10 mm ( one hundred fifty into ten millimeter )

Providing and fixing powder coated aluminium tower bolts (barrel type) dyed to required shade and colour with screws etc. complete as per HPPWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) 100 x 10 mm (one hundred into ten millimeter)

Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetra complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-incharge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) 125mm ( one hundred twenty five millimeters )

Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetra complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-incharge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government a) 100mm ( one hundred millimeters )

Providing and laying Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm nominal size)laid in one layer finished with a floating coat of neat Cement as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) 40 mm thick

Providing G.I sheet roofing fixed with galvanised iron J.or L. hooks bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete excluding the cost of purlins refters and trusses as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government a) 0.63 mm thick sheet

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 Per kilo gram/Per square meter including filling the joints with approved adhesive complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) 100 mm dia pipe

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 Per kilo gram/Per square meter including filling the joints with approved adhesive complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidential charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) 150 mm dia pipe

Providing laying steel work of TATA,SAIL or RASHTRIYA ISPAT or its substantial equivalent make welded in built up section/ hollow section trusses & framed work, including cutting,hoisting & fixing in position including applying a priming coat of red lead paint in beams joists channels, angles, tee,flats with connecting plates or angle cleats as in main and cross beams, hip and rafters,purlins connected to common rafters and the like as per HP. PWD. Specifications of 1990 vplume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment. a) In trusses and trussed purlins in buildings.

15 (Fifteen) millimeters thick cement plaster in single coat on the side of brick/concrete/ stone walls for interior plastering up to all heights including arises. Internal rounded angles, chamfers and/or rounded angles not exceeding 80 (Eighty) millimeters in girth and finished even and smooth in cement mortar 1:6(One cement: Six sand)as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying (to level or slopes) PVC pipe of the following internal diameters including testing of pipes and joints complete: as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax.. a) 150 mm

Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40mm nominal size) bedding for PVC pipes of the following internal diametres, necessary from work & curing complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax.. a) 150 mm dia

Providing and fixing Galvanised structural steel plate 200m wide 6 mm thick , welded prperly with steel posts i/c welding charges and applying a priming coat of red lead paint complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Letering with paints of apparoved brand and manufature with ready mixed paint ( white or other than white) lettres/ figures of 15 cm height etc. as per the entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing recast RCC cover of NTC make or its substantialy equivalent make with frame of size 450 mm dia etc. as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Demolition of brick work below ground level upto 1.50 Metres depth including stacking of serviceable materials and disposal of unserviceable materials within all leads and lifts work as per the directions of Engineer-In-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) In cement Mortar

Demolition of brick work above G.L. upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within all leads and lifts as per the directions of Engineer-In-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) In cement mortar

Providing and laying brick bat / brick aggregate 40 mm ( forty milimeters) in soakpit complete as per Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Water Supply & Sanitory Installation :- Excavation in drain channel in earth work in all heights and depths in all kinds f soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock, with chiselling and wedging out of rock;(where blasting is prohibited) and their intermediate classification of soils including ,dewatering including pumping or bailing out of water wherever required, setting out to required lines, levels as shown on the drawing and as directed by the Engineer-in- Charge at site, according to the H.P.PWD. specification of 1990 (One thousand Nine hundred Ninety) Volume-I and sorting out useful & un-useful materials and stacking the same in all leads and lifts and transportation of the un-useful materials on approved dumping sites through all modes of transportation including head load, animal load or mechanical means along with its levelling fine dressing and all labour, machineries, materials, tools equipments and safety measures and incidental necessary to complete the work by mechanized means and labour (if any required) . The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and laying 15mm (Fifteen millimeters) nominal bore in trenches galvanised mild steel tubes (medium grade) , tube fittings (earth work in trenches to be measured and paid for separately) including carriage of materials through, labour tool and plants all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and laying 20mm (Twenty millimeters) nominal bore in trenches galvanised mild steel tubes (medium grade) , tube fittings (earth work in trenches to be measured and paid for separately) including carriage of materials through, labour tool and plants all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing 15mm (Fifteen milimetre) nominal bore to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor including carriage of materials through, labour tool and plants all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing 20mm(Twenty milimetre ) nominal bore to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor including carriage of materials through, labour tool and plants all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40mm nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of materials through, labour tool and plants all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Fixing water meter stop cock of 15mm nominal bore in mild steel tube i/c necessary fittings such as mild steel galvanised jam nut, sockets etc. complete cutting and making long screws (water meter and stop cock to be measured and paid for separately) including carriage of materials through, labour tool and plants all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) composite pressure pipe U.V. stablized with carbon black confirming to IS-15450-2004 water supply including clamp at one metre spacing, cutting, fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipes exposed on wall as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government : 1216 (16mm O.D. pipe)

Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) composite pressure pipe U.V. stablized with carbon black confirming to IS-15450-2004 water supply including clamp at one metre spacing, cutting, fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipes exposed on wall as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government: 1620 (20mm O.D. pipe)

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers,connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. Equal Tees 1216

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers,connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. Equal Tees 1620

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers,connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. Reducing Tees 1620

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers,connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. Female branch Tees 1216*1216*15 mm thread

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers,connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. Female branch Tees 1620*1620*20 mm thread

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers,connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government Female Elbow 1216*15 mm

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers,connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. Female Elbow 1620*15 mm

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers,connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. Male thread connector 1216*15 milimetres

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers,connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. Male thread connector 1620*15 milimetres

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers,connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. Female thread connector 1216*15 milimetres

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers,connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. Female thread connector 1620*15 milimetres

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers,connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. Coupler 1216

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers,connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. Coupler 1620

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers,connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government Reducers 1620*1216

Providing and fixing various capacity.store well branded ISI marked Polythene water tank with 40 (Forty) millimetre nominal size bore galvanized Mild Steel scour tube with fitting 25 (Twenty Five) millimetre nominal bore galvanized Mild Steel overflow tube with fittings and mosquito proof coupling of approved municipal design 15 (Fifteen) millimetre nominal size ball valve and mosquito proof PVC cover with locking arrangement including providing pads of size as required for inlet and outlet tube complete ISI marked as per HP.PWD specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads lifts and all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing high pressure PVC ( poly vinyl chloride) spigot and socket waste ventilating pipes ISI marked including fixing with approved adhesive complete 150 mm (one hundred fifty millimeters) diameter as per HP.PWD specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads lifts and all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing high pressure PVC ( poly vinyl chloride) spigot and socket waste ventilating pipes ISI marked including fixing with approved adhesive complete 110 mm (One hundred ten millimeters) diameter as per HP.PWD specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads lifts and all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing 150mm (One hundred fifty millimeters) dia meter PVC (poly Venyle Chloride ) holder bat clamps of approved design to P .V.C. (polyvenyle chloride ) pipes embedded in and including cement concrete block 100 mm x 100 mm x 100mm ( one hundred millimeters into one hundred millimeters into one hundred millimeters ) of 1:2:4 ( one cement : two sand: four graded stone aggregate 20mm ( twenty millimeters ) nominal size ) mix including cost of cutting holes and making good the wall etcetera complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing 110mm (One Hundred ten millimeters) dia meter PVC (poly Venyle Chloride ) holder bat clamps of approved design to P .V.C. (polyvenyle chloride ) pipes embedded in and including cement concrete block 100 mm x 100 mm x 100mm ( one hundred millimeters into one hundred millimeters into one hundred millimeters ) of 1:2:4 ( one cement : two sand: four graded stone aggregate 20mm ( twenty millimeters ) nominal size ) mix including cost of cutting holes and making good the wall etcetera complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing 110 mm X 90 mm PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 150 mm (One hundred fifty milimetre) dia PVC single equal branch with oval access door ISI marked, insertion rubber washer 3mm (Three millimeter) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete, including carriage of materials through, labour tool and plants all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred milimetre) dia PVC single equal branch with oval access door ISI marked, insertion rubber washer 3mm (Three millimeter) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete, including carriage of materials through, labour tool and plants all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 150 mm dia PVC door bend with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 110 mm dia PVC door bend with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 150 mm dia PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 110 mm dia PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 150 mm dia PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials through, labour tool and plants all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 110mm dia PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials through, labour tool and plants all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 150 mm dia PVC Plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials through, labour tool and plants all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 110mm dia PVC Plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials through, labour tool and plants all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing PVC 'P' or 'S' trap for water closet ( squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. 150 mm Dia

Providing and fixing PVC 'P' or 'S' trap for water closet ( squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. 110 mm Dia

Providing and fixing 150 mm dia PVC cowl ISI marked including fixing with approved adhesive etc. complete including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 110mm dia PVC cowl ISI marked including fixing with approved adhesive etc. complete including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing HIND WARE/CERA MAKE orrisa pattern vitreous china water closet of HIND WARE/CERA MAKE or its substantialy equivalent make (Indian type W.C. pan) size 580mm (Five hundred eighty millimeters) white shade (Earth work, bed concrete, foot rest and trap to be measured and paid for separately) including carriage of materials within all leads, lifts and other incidentals and as per directions of Engineerin- charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing wash down water closet (European type W.C pan) of HIND WARE/CERA MAKE or its substantialy equivalent makewhite shade with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1(One cement isto One sand) (Seat and cover to be measured and paid for separately), Ordinary Closet (Universal Closet) ISI marked, as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges and as per directions of Engineerin- charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing PTMT coloured/ white high density polyethylene / polypropylene of HIND WARE/CERA MAKE or its substantialy equivalent make poly Venyl Chloride 10 liters (ten) capacity (full flush )European standard control low level flushing cistern with a pair of CI or MS brackets complete with fittings such as lead valves syphon, 15mm (fifteen millimeter) nominal size PVC ball valve with polythene float, CP brass handles, unions and couplings for connection with inlet, outlet and over flow pipes 40mm (forty millimeters) dia meter including Chromium plated flush bend and cutting holes in walls and making good the same and connecting the flush bend with cistern and closet ( over flow pipe to be measured and paid for separately ) complete including carriage of materials within all leads, lifts and other incidental or as directed by the Engineerin-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing plastic Seat (solid/hollow type) and coverof HIND WARE/CERA MAKE or its substantialy equivalent make for wash down water closet with CP brass hinges and rubber buffers solid type black plastic sheet and cover, as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts and other incidental or as directed by the Engineerin-Charge . The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing automatic flushing cistern of viterous china with a pair of C.I. Or M.S. brackets complete with fittings including C.I. Syphonic apparatus,mosquito proof lid, C.P. Brass unions and coupling for connections with inlet, outlet and overflow pipes including cutting holes and making good the same (overflow pipe to be measured and paid for separately) :- 5 litres capacity :-as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges or as directed by the Engineerin-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing vitreous China flat back type of size 633mm x 395mm x 420mm. of HIND WARE/CERA MAKE or its substantialy equivalent make urinal including connection the urinal with waste pipe by means of white lead mixed with choppe hemp (weste pipe to bemeasured and paid for separately as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing C.P. brass flush pipe /spreaders for urinal with fitting such as unions,clamps etc. (all in C.P. Brass) including cutting holes and making good the same :-15mm (fifteen milimeter) nominal bore as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges or as directed by the Engineerin-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing division plate of viterous china for urinal of white shade of HIND WARE/CERA MAKE or its substantialy equivalent make 600*300 (Six hundred into Three hundred) millimeter’s size for urinal, as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges or as directed by the Engineerin-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing of wash basin of size 630 X 450 millimetres of viterous china of HIND WARE/CERA MAKE or its substantialy equivalent make without pedestal in white shade with single hole for pillar tap with Cast Iron or Mild steel brackets painted white including cutting holes in walls and making good the same including fittings complete in all respect including brackets and all accessories as per HP.PWD specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing rubber plug for of 32 mm dia for Sink and wash basin including brackets and all accessories ISI marked as per HP.PWD specification , including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing M.I Union 32 (Thirty Two) millimetres diameter ISI marked , complete in all respect as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing C.P. brass waste 32 mm dia.(heavy duty ISI marked IS:8931 & 8934) for wash basin or sink including carriage of materials as per HP.PWD specification , including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 32 (Thirty Two) millimeters dia lead waste pipe ISI marked as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 100mm(one hundred milimeter) C.P. grating ISI marked as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 600*450 (Six hundred into Four hundred Fifty) millimeters size beveled edge mirror of superior glass mounted on 6 (Six) millimeters thick asbestos sheet or ply wood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Governmentl.

Providing and fixing 600mmx120 mm glass shelf with C .P brass and guard rail complete of approved make, fixed to wooden plugs with C. P brass screw as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing chromium plated iron Towel Rail 600mm (Six hundred) millimeters size of Cera or its equivalent, as per HP.PWD specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing chromium plated brass soap tray of Prayag/ Hindware/ Cera or its substantialy equivalent make with Chromium plated brass brackets fixed to wooden cleats with Chromium plated brass screw complete including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeters )diamete chromium plated brass bib tap of Prayag/ Hindware/ Cera or its substantialy equivalent make with capstan head complete including carriage of materials within all leads and lifts and other incidental or as directed by the Engineerin-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing chromium plated brass pillar tap with capstan head 15 (Fifteen) millimeters dia Prayag/ Hindware/ Cera or its substantialy equivalent make as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing chromium plated brass angle valve 15 (Fifteen) millimeters of Prayag/ Hindware/ Cera or its substantialy equivalent make, as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing P.V.C. Connection pipe of apperoved make with brass unions 300/450mm ( three hundred / four hundred fifty millimeter ) long and 15mm (fifteen millimeters) nominal bore including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen milimetre)nominal bore brass full way valve with wheel complete ISI marked as per HPPWD specifications including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 20mm (twenty milimetre)nominal bore brass full way valve with wheel complete ISI marked as per HPPWD specifications including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing PTMT fancy bib cock of approved quality and colour fancy 20mm (fifeen milimter) with flange ISI marked as per HPPWD specifications including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing PTMT reducer for push cock of approved quality and colour (20mm x15mm ) (twenty milimeters into fifteen milimeters) ISI marked as per HPPWD specifications including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-inCharge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing PTMT angle cock of approved quality and colour fancy 15mm (fifeen milimter) with flange ISI marked as per HPPWD specifications including carriage of materials within all leads and lifts and other incidental or as directed by the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing PTMT jet spray of approved quality and colour with 1.5 mtr(one point five meters) tube. as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing grab bars with chromium plated steel pipe 40mm ( forty millimeters) dia at 78 cm ( seventy eight centimeter ) height with mild steel plate 4mm (four millimeters ) thick as per detail and position of seat wash basin with nuts ,bolts and clamps etc. including cutting holes and making good the walls complete in all respect as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Constructing man hole with RCC top slab in 1:2:4 mix in (m 1 cement :2 sand :4 graded stone aggregates 20 mm nominal size ) foundation concrete 1:4:8 ( 1 cement :4 sand : 8 graded stone aggregates 40 mm nominal size inside oplastering 15 mm thick with cement mortar 1:3 ( 1 cement : 3 sand) finished withy a floating coat of neat cement and making channel in concrete 1:2:4 mix ( 1 cement : 2 sand :4 graded stone aggregates 20 mm nominal size ) finished smooth complete including curing and testing complete of in side size (800x800x500 m deep including precast RCC cover of NTC make with frame of size 455x610 mm internal diemension with 230 mm thick wall of brick masonary using common burnt clay building bricks in Cement Mortar 1:3 ( 1 cement :3 sand) including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Constructing main hole with RCC top slab in 1:2:4 mix in (m 1 cement :2 sand :4 graded stone aggregates 20 mm nominal size ) foundation concrete 1:4:8 ( 1 cement :4 sand : 8 graded stone aggregates 40 mm nominal size inside oplastering 15 mm thick with cement mortar 1:3 ( 1 cement : 3 sand) finished withy a floating coat of neat cement and making channel in concrete 1:2:4 mix ( 1 cement : 2 sand :4 graded stone aggregates 20 mm nominal size ) finished smooth complete including curing and testing complete of in side size (800x800x1000 m deep including precast RCC cover of NTC make with frame of size 455x610 mm internal diemension with 230 mm thick wall of brick masonary using common burnt clay building bricks in Cement Mortar 1:3 ( 1 cement :3 sand) including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 460x560x229 mm stainless steel kitchen sink of approved make (ISI) made with drain of board and C.P. waste with C.I. Or M.S. bracket painted white including cutting holes and making good the same but excluding fittings complete including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing Chromium plated 15mm mixer of approved make for kitchen sink with top/bottom swinging spout including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Cutting holes upto 15 cm x 15 cm in R.C.C floors and roofs for passing drain pipe etc. and repairing the holes after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including finishing complete so as to make it leak proof including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Cutting holes through existing brick work including making good the same in cement mortar 1:6(1 cement : 6 sand) per cm depth of cutting and repairing the holes after insertion of drain pipe etc. including finishing complete so as to make it leak proof including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

ELECTRICAL INSTALLATION WORKS:- Excavation in all kind of earth including their intermediate classification such as Pick work,Jumper work,Blasting work,soft rock, hard rock, including chiseling/wedging out of rock where blasting is prohibited, soft rock or hard rock, including salurated conditions etc. and bailing/pumping out water stacking the excavated materials in all leads and lifts. Wherever possible/required by the Engineer-in-Charge clear from the edge of excavation & then returning the stacked soil in 15cm. layers,when required into plinths sides of foundations etc. consolidating each deposited layer by ramming & watering & then disposing of all surplus excavated earth in all leads and lift at the approved dumping sites as per the direction of the Engineer-in-Charge

Providing and laying mechanically mixed vibrated cement concrete 1:2:4(1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of from work in foundation and plinth, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) Group A

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/ recessed PVC conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface /recessed PVC conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1No. HRFRLS / PVC insulated single core copper conductor cable of same size for earthing as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. 2x1.5 sq. mm

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1No. HRFRLS / PVC insulated single core copper conductor cable of same size for earthing as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. 2x6 sq. mm

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1No. HRFRLS / PVC insulated single core copper conductor cable of same size for earthing as required complete with all leads,lift of materials and other incidentals complete as requiredas per directed by the Engineer in Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. 2x10 sq. mm

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required.including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation made from (50 mm x 50 mm x 6 mm thick) M.S. angle iron frame, covered with 1.6 mm thick M.S. sheet duly welded on five sides & front side hinged, complete with locking arrangement with sufficient No. vertical and horizontal intermediate switchgear supporting members each of M.S. flat 50mmx6mm thick of suitable length duly welded. The cubical pedestal shall have cable entry box at one or two sides and 4 No. legs of 50mmx50mmx6mm thick M.S. angle iron each 60 cm long including, powder coated painting and bonding to the existing earth etc., the same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :- 450 mm deep (nominal)

Supplying and fixing sheet metal bus-bar chamber suitable for 200 Amp. 415 volts capacity with 4 No. aluminium alloy or wrought aluminium strip bus-bars each of length 300mm & cross-sectional area (25.4mm x 4.75mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (380mmx450mmx150mm) nominal with all accessories including connections, earthing the body etc. as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :-

Supplying and fixing sheet metal bus-bar chamber suitable for 63 Amp. 415 volts capacity with 4 No. aluminium alloy or wrought aluminium strip bus-bars each of length 450mm & cross-sectional area (16mmx3.17mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (530mmx350mmx150mm) nominal with all accessories including connections, earthing the body etc. as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :-

Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . 125 Amp. -10 KA

Providing and fixing compact MCCB of rating 63 amp, four pole with fixed thermal and fixed magnetic setting having breaking capacity of 16 KA at 415 Volts, making connection as required ncluding carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Suppling installation, Testing & Commissioning of Energy meter box with complete with 4 pole MCCB 100amp, copper busbar 100amp, metering with ampere meter voltmeter . Indication & space for housing 16 no, single phase energy meter as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :- Single pole. Cat-A.

Supplying and erection of 40/50/63 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :- Double pole. Cat-A.

Supplying and fixing following rating, double pole(single phase & neutral) RCCB 240 volts, having a sensitivity up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . 40 Amps. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :- Double door-4way

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :- Double door-8 way

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :- Double door-12 way

Earthing with copper earth plate 600mm x 600mm x 3mm thick , including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Extra for using salt and charcoal for pipe earth electrode complete as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing 8 SWG Copper wire at 0.50 mtr below ground level for earth electrode conductor, including soldering etc as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :- Armoured cable 25 sq. mm (3.5 core)

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid on the surface including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . Armoured cable 70 sq. mm (3.5 core)

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :- 300 mm sweep

Providing and fixing LED Flood/Beam light 70 Watt of .Havells, Syska, C&S, Surya & equivalent make as required as per directed by the Engineer in Charge The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing LED tube light in aluminium housing E-lite LED Curve 22 W 6500 K cool daylight (CDL) with Polycarbonate body efficiency 100 lumens watt Syska, Havells, Syska, C&S, Surya & equivalent make as required as per directed by the Engineer in Charge The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing LED Bulkhead 9 W with premium quality diffuser for glarefree light and easy to install snapfit installer Havells, syska, c&s, surya & equivalent make as required and approved by the Engineer-in- Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing LED surface Downlight 22 Watt with white plastic body Make : Havells, syska, c&s, surya & equivalent make as required and approved by the Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing and fixing LED surface Downlight 15 Watt with white plastic body Make : Havells, syska, c&s, surya & equivalent make as required and approved by the Engineer-in- Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

HIGH MAST LIGHT & SOLAR STREET LIGHT INSTALLATION :- Earthing with G.I earth pipe 4.5 mtr. long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for pipe earth electrode complete as required.

Providing and fixing 6 SWG (4 mm dia.) G.I. wire on surface or in recess for loop earthing as required.

Supplying installation testing and commissioning of 16.00 mtr. High Mast light with steel grade 5355 as per BS-EN 10025 i/c all accessories complete including exavation , with all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

Providing and installation of High Wattage LED (200 watts IP rating IP-66)) Flood light in white finish with anti glare polycarbonate diffuser and energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Syska, Bajaj,Greatwhite, C&S,or any other approved by Engineer-in-Charge.

Providing and Fixing aviation obstruction light twin long in all leads/lifts,within all leads,lifts of materials and other incidentals complete as required.as per directed by the Engineer in Charge

Supplying and installation of High Mast control panel with one no. incomer 32A, 4 Pole MCB, 3 Pole 32A contactor 1no, 2nos 9A contactor for control panel, 1 no timer analog type along with other electrical accessories. The High Mast control shall be mounted as a fabricated angle stand, within all leads,lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge .

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size:- Armoured cable 16 sq. mm (four core)

Providing and Fixing of solar street blights (15 metre interval) Wattage:15 watt, sensor:Dusk & down, Battery:in built in light, Fixture Battery Type: Lithium, Battery: 15Ah, Body Material : Aluminium Die Casting, Lumens:135-145 per watt, Pole : Length-5m, D9iameter- 76mm, CRI : >80, Solar Panel : 50 watt, Battery Backup : 12-14hours, IP Rating : IP65/IP66, CCT : Cool White & Warm White, Warranty : 2 year

Mangla Amit Builders Private Limited

P K Construction Shimla Pvt Ltd