GE/863/EWS-T-51 OF 2025-26 SPL REPAIR TO BLDG NO T-119 AND PROVN OF 4 X TOILET CUM BATHROOM NEAR N

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings Complete all as specified and as directed by Engr in Charge.

S & F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws Complete all as specified and as directed by Engr in Charge.

Dismantling of wall and ceiling boards(fibre, pulp, insulationetc.) or insulation boards/ slabs/ blankets, any thickness including cover fillets Complete all as specified and as directed by Engr in Charge.

S&F hangers 6mm dia G.I. (upto 1200mm length ) adjusting level, size of grid 605mm X605mm, fixed to steel purlins or rafter with nexc 60cm long and 6mm dia adjustable Complete all as specified and as directed by Engr-in-charge.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mmthick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clipsacross the intermediate channel at 457 mm centre to centre. size of grid 605mm X605mm Complete all as specified and as directed by Engr in Charge.

S&F Non asbestos fiber cement building board 6mm thick ( designer ceiling board), fixed to aluminium or MS galvanised snap grid frame work with screw in ceiling Complete all as specified and as directed by Engr-in-charge.

Supply and fix steel work in tubular trusses/rafetr/purlin including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 Complete all as specified and as directed by Engr in Charge.

M&L for 50 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing & finished the surface even & fair Complete all as specified and as directed by Engr in Charge.

M & L for machine cut Kota stone slab flooring 20 to 25 mm thick over Screed bed or bedding layer of cement mortar 1:6, 20 mm thick base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing Complete all as specified and as directed by Engr in Charge.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc Complete all as specified and as directed by Engr in Charge.

M&L for Precast cement concrete 1:3:6 type C1 (Using 20 mm graded granite stone aggregate) block masonry with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6 Complete all as specified and as directed by Engr in Charge.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finish the surface even and smooth without using extra cement all as specified and as directed by Engineer-In-Charge.

M&L for preparing new plastered surfaces and applying two coats of cement base paint on wall surface over one coat of alkali resistant primer Complete all as specified and as directed by Engr in Charge.

M&L preparing newly plastered surfaces of wall and applying two coats of oil bound distemper , over a coat of primer over a coat of wall putty Complete all as specified and as directed by Engr in Charge.

Supply and fixed Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type in position as indicated Complete all as specified and as directed by Engr in Charge.

M & L for cement concrete type D2 1:4:8 using 40mm graded stone aggregate in foundations, filling and mass concrete. Complete all as specified and as directed by Engr in Charge.

M&L for Hard core of gauge n exc 63mm thick of broken boulder spread leveling watering ramming to true surface complete all as specified and directed by Engr-in-Charge..

M & L for glazed ceramic coloured tiles of 300x 450x 7 mm thick as on vertical surfaces and rises to steps etc. over 10mm thick rendering in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile Complete all as specified and as directed by Engr in Charge.

Returning filling in including speading,leveling ,watering and well ramming in layers not exc 25 cm in soils complete all as specified and directed by Engr-in-Charge.

Removing of excavated soil n exc 50m and depositing where directed at a level n.exc 1.50m above the starting point Complete all as specified and as directed by Engr in Charge.

M & L for precast cement concrete M-15 Nominal Mix (1:2:4) (using 20 mm graded stone aggregate), as in lintels upto 1.5 m clear span, cills, steps, etc complete all as directed including necessary form work as required Complete all as specified and as directed by Engr in Charge..

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips Complete all as specified and as directed by Engr in Charge.

M&L for MS frame work as roof trusses (framed), trussed, purlins, cr

ITEM NO-60

ITEM NO-92

All as per item No 98 here-in-before but for one multipin socket outlet 5 Amp but using 2x 1.5 + 1 x 1.5 sqmm multistranded FRLS copper cable on the independent board Complete all as specified and as directed by Engr in Charge.

All as per item No 98 here-in-before but for one multipin socket outlet 5 Amp on the same board with other switches Complete all as specified and as directed by Engr in Charge.

All as per item No 98 here-in-before but for one multipin socket outlet 15 Amp, but using 2 x2.5 +1 x 2.5 sqmm multistranded FRLS copper cable, independent board Complete all as specified and as directed by Engr in Charge.

S&F in replacement of switch piano type 5 Amp, 230 Volt, flush type single pole one way Complete all as specified and as directed by Engr in Charge.

S&F in replacement of socket outlet multipin 5 Amp 230 Volt flush type Complete all as specified and as directed by Engr in Charge.

S&F in replacement of switch piano type 15 Amp, 230 Volt, flush type single pole one way Complete all as specified and as directed by Engr in Charge.

S&F in replacement of socket outlet multi pin 15 Amp 230 Volt flush type Complete all as specified and as directed by Engr in Charge.

S&F In replacement of for Lamp holder, PVC/Polycarbonate type with back plate suitable for Angle/batten fittings Complete all as specified and as directed by Engr in Charge.

S&F of rechargeable led bulb minimum 4 Hrs Battery backup 9 Watt B-22 Base Complete all as specified and as directed by Engr in Charge.

S&F in rplacement of Ceiling rose, 3 terminal, PVC isolated body Complete all as specified and as directed by Engr in Charge.

S&F in replacement of LED light fitting 20W, 220 volt AC, having colour temperature daylight (6500K), Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose Complete all as specified and as directed by Engr in Charge.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size Complete all as specified and as directed by Engr in Charge.

S&F including flushing in wall MCB distribution board vertical TPN 4 way 415 volt AC doublr door sheet with bus bar neutral earth bar including provision of MCB TPN 63 amp conforming to IP 43 as incomer Complete all as specified and as directed by Engr in Charge.

S&F MCB TPN 63 amp 415 volt with bearing capacity of 16 KA Complete all as specified and as directed by Engr in Charge.

S&F in replacement of sheet metal enclosure double door distribution board single pole and neutral, 12 way 240 volt with 100 amps rated bus bar complete with bus and neutral link Complete all as specified and as directed by Engr in Charge.

S&F in replacement of MCB 6 to 32 amp rating 240V, 10KA 'B' curve, Single pole in the MCB DB complete with connection testing and commissioning Complete all as specified and as directed by Engr in Charge.

S&F in replacement of MCB SPN 40 amp2 amp rating 240V, 10KA 'B' curve, Single pole in the MCB DB complete with connection testing and commissioning Complete all as specified and as directed by Engr in Charge.

Supply & laying LT UG XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 Volts grade cross-sectional area 16 sqmm 4 core as per IS specification laid through GI pipe/on floor/wall Complete all as specified and as directed by Engr in Charge.

Supply and laying of GI pipe light galvanized with all fitting laid in trenches for cable proctection of 50 mm bore Complete all as specified and as directed by Engr in Charge.

M&L in replacement of Earthing complete with galvanised steel earth plate electrode 600×600×6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on Complete all as specified and as directed by Engr in Charge.

Supply and fixing Building LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection Complete all as specified and as directed by Engr in Charge.

Supply, laying and drawing in and including 20 mm dia casing caping including cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6 sqmm (as earth wire) of stranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete including connection Complete all as specified and as directed by Engr in Charge.

Excavation in trenches not exc. 1.5 m wide and not exc 1.5 mtr deep in soft loose soil for laying / taking up/ taking down of cables and getting out and leveling of bottom surface to required level all as specified and directed by Engineer- in- Charge.

Returning filling in,. Including spreading, leveling,. Watering and well ramming soil in layers not exceeding 25 cm thick Complete all as specified and as directed by Engr in Charge.

Removing excavated material (i.e. soil) from site to a distance n. exec 50 mtrs away and depositing where directed at a level n. exc. 1.5 mtr above the starting point all as specified and directed by Engineer-in-Charge.

M&L for sand filling floors or in foundation including watering and compansation Complete all as specified and as directed by Engr in Charge.

ITEM NO-125

Supply and fixing ceiling fans complete with blades, down rods, remote

ITEM NO-126

ITEM NO-127

ITEM NO-128

ITEM NO-129

ITEM NO-130

ITEM NO-131

ITEM NO-132

ITEM NO-133

ITEM NO-134