SPL REPAIR TO OR MARRIED ACCN BLOCK NO. LM-44 (1-4) OF 17 JAT AT SHILLONG CANTT AND PROVN OF HARD STANDING WITH RCC FLOORING FOR MT PARK AT 101 AREA SIG COY AND PROVN OF TOILET AND BATHROOM AT BLDG NO. BT-48 AND PROVN OF SECURITY LIGHTS WITH ALLIED S

Amount

Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified and directed.

Excavation in post holes each n.exc. 0.5 cum in soft/loose soil getting out returning, filling in and ramming earth or broken rubble mixed with earth around in layer n.exc. 25 cm, watering and removing surplus soil to a distance n.exc. 50 mtr and making good surface complete all as specified and directed.

M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base and foundation filling mass concrete all as specified and directed.

M&L for PCC (1:2:4), type C1 (using 20 mm graded stone aggregate) as in foundation filling and mass concrete including all necessary form work complete all as specified and directed.

S&F steel work as in tubular, rafters, purlins, posts and similar work (round/square/rectangular shape of pipes as approved by Engr-in-charge ) trusses including posts, special shaped washers, gusset plates etc complete using ERW or induction butt welded tubes conformining to IS 1161-1998 garde St-240 complete all as specified and directed.

M&L for MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde-E- 250) quality- A Fe comlete all as spd and directed.

S & F Pre-painted galvalume alumunium Zinc coating GI based corrugated steel Sqm 0.50 Sqm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws etc. complete all as specified and directed

S&F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed.

M & L for Block masonry with solid precast cement concrete blocks made out of cement concrete 1:3:6 type C-1, using 20mm graded stone aggregate, exc 10cm width and setting in cement mortar 1:6 complete all as specified and directed.

M&L for 2 Coats of cement base paint over a coat of primer incl prepration of newly plastered surface on wall complete all as specified and directed.

M&L painting to new steel surfaces of any description, over 10cm in width or girth, steel Sqm surfaces with two coats of synthetic emamel paint over a coat of red-oxide primer complete all as specified and directed.

Taking down chowkat or frame exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats or frames n. exc 1.50 Sqm each with shutters (without taking off shutter from the frames) complete all as specified and directed.

Taking down shutters of any description nexc 1.0 Sqm reach complete all as specified and directed.

Taking down shutters of any description nexc 1.0 Sqm refixing in same opening complete all as specified and directed.

Taking down shutters of any description exc 1.0 Sqm and nexc 2 sqm refixing in same opening complete all as specified and directed.

Demolition of Brickwork/solid concrete block work built in Cement mortar complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of reinforced cement concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and as directed.

Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid in any mortar complete all as specified and directed.

Dismantling wall and ceilling boards of any description including cover fillets complete all as specified and directed.

Dismantling boarding any description fixed in any position with nails complete all as specified and directed.

Dismantling of timber scantling 40 sqcm over in section in any position (unframed work) complete all as specified and directed.

RCC nominal mix 1:2:4 type B-1 (using 20mm graded aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in kitchen shelves and the like complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed.

Ditto, but 6mm to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S&F Gl frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 4mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed .

M&L 4mm thick E Board 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and as directed.

S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L 2nd class hard wood in scantling clean sawn timber fixed complete all as specified and directed.

M&L 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F 30 mm thk Flush door shutters solid core construction with block board core and plywood face pannels , commercial type on both sides complete all as specified and directed.

S&F 35mm thick 2nd class hard wood skelton shutters open rebated and prepare to receive glass, gauze, etc complete all as specified and directed

S&F stainless steel wire cloth,0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 18/19 mm thick block boards grade 1 quality exterior grade fixed with screws to timber frame complete all as specified and as directed.

S&F 12 mm thick block boards grade 1 quality exterior grade fixed with screws to timber frame complete all as specified and as directed

S&F 0.90 mm thick decorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified and directed.

S&F butt hinges 75 mm medium weight, stainless steel, and fixed complete all as specified and directed.

S&F Butt hinges 125mm, medium weight, stainless steel, and fixed complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed complete 150 mm long complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed complete 100 mm long complete all as specified and directed.

S&F extruded aluminium alloy handles fabricated type anodised of size 150 mm complete all as specified and directed.

S&F extruded aluminium alloy handles fabricated type anodised of size 125 mm complete all as specified and directed.

S&F Magnet catches for cupboard shutter, brass body and striking plate including letting in all as specified and as directed.

M&L 2nd class hard wood plain fillets sectional size exc 6 nexc 13 sqcm square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed.

S&F 30mm width of flaps (When open in mm) continuous (piano) hinges, mild steel , bright finish or electro galvanised complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp staple (bolt type) 300mm size and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed

S&F powder coated(powder coating min 50 micron) anodised window and ventilator shutters side hung/two or three track sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete all as specified and directed.

M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame n.exc 0.50 sqm complete all as specified and as directed.

M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.

M&L for 4.80 mm thick frosted sheet glass quality and glazing fixed to aluminium frame n. exc 0.50 sqm complete all as specified and as directed.

M/L precast cement concrete block massonry with solid blocks nexc 10 cm in width and settings in CM 1:4 type C1 1:3:6 (20mm graded aggregate) complete all as specified and directed.

M & L Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over and including a backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed.

M&L for 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub base to recd floor tiles complete all as specified and directed

M&L for Non Skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:6). complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exc 0.18 sqm but n exc 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified

M&L for 18/20mm thk granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and incl pointing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite over and including 20 mm thick cement screed bed in CM 1:4 complete all as specified.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking plateform, and other similar situation.

Taking down plastering on lathing (other than wire-netting, without removing lathing, in cement mortar (one side only measured in cases where both sides are plastered).

M&L for rendering 10mm (cement plaster 1:6) thick on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing complete all as specified and directed.

M&L for rendering 15mm (cement plaster 1:4) thick on the other side of lathing with approved Water proofing compound @ 3% by the weight of cement or as per manufacturers instructions complete all as specified and directed.

Supply only Integral waterproofing compound

S&F in repairs 20 mm dia harrison rails, chromiun plated with wooden finished fancy type with fixing brackets stops , rollers etc all as directed and specified.

S&F in repairs 20 mm dia aluminium inodised double rod brackets all as directed and specified.

S&F solid PVC door frame of size 50 mmx 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specifiecation complete all as specified and directed.

S/F Factory made solid panel PVC door shutter 30 mm thick (style) considering of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed togeather with solvent cement, fixing in the frame at site as per specification & drawing.

S&F Bib taps, chromium plated cast copper alloy fancy type 15mm bore , screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F stainless steel gratings 100mm bore size fixed with cement motar complete all as specified .

S&F 125mm shower rose cast copper alloy, chromium plated, fancy type, with swivel joint fixed to 15 mm bore iron pipe complete all as specified and directed

S&F 15 mm bore brass CP basin mixer for mixing hot & cold water screwed down high pressure for iron pipe and fixed complete all as specified and as directed

S & F in repairs Vitreous china squatting pan of pattern 'long pan' size 580 mm white with 'P' or 'S' trap front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F PVC valveless, 10 ltrs, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repairs Vitreous china WHB, white, flat back, of size 550 x 400 mm including brackets, waste coupling 32mm, and waste Pipe, 32mm incl pedastal complete all as specified and directed.

M&L 75mm dia PVC(SWR)floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and directed.

M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bends 110mm dia complete all as specified and as directed

S&F PVC (SWR) bends 75mm dia complete all as specified and as directed

S&F PVC(SWR) 75mm dia vent cowls

S&F PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.

Dismantling water tanks exc 500 ltrs but not exc 1000 ltrs capacity , complete all as specified

Supply and fixing rotational moulded HDPE water storage tank ,double layer ,ISI marked (cylendrical vertical type with closed top) of capacity 500 ltrs in position incl float ball brass valves, high pressure, with polythene float and flynut complete , screwed for iron pipe or brass ferrule and fixed for iron pipe and fixed all as specified and directed.

M&L for preparation of old wooden surfaces of any description over 10cm in width or girth and treated with one coats of synthetic enamel paint complete all as specified and directed.

S&F S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F Stainless steel kitchen plate rack of size 31" X 30' X 10" made out of stainless steel sheet of 1.00 mm with all accessories including taking down old unservicable rack.

S&F brass chromium plated tubular towel rail 20mm dia D type 60 cm long between flanges complete

Taking up or down steel tubing and disconnection, for 15mm bore of pipes.

Taking up or down steel tubing and disconnection, for 20mm bore of pipes.

Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

All as per Item No 92 above here–in–before, but for 20mm dia (Bore).

S&F stop valve cast copper alloy screwed down, high pressure with crutch or butterfly handle 15mm dia complete all as specified and directed

S&F cutting chases, pinning in concrete block workmaking good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:2:4, type B-2 (using 40mm graded agg) as in plinth protection finished even and smooth without using extra cement.(incl necessary joint filling with mixture of paving bitumen & sand in 1:3) complete all as specified and directed.

M&L for PCC coping (1:2:4) type B-1 (using 20mm graded stone aggregate) over walls under roof sheets to prevent enteries of birds over false ceiling complete all as specified and directed.

S&F MS framed work such as grills, gratings, etc with ends of bars, shouldered and/ or riveted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk way, railing and framed work of water tanks and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed.

Complete removal existing treatment and applying 1mm thick of wall care putty to achieve smooth surfaces and applying two coats of Oil Bound Distemper of approved shade/tint complete all as specified and as directed.

M & L for preparation of new plastered/concrete surfaces of walls, providing 1 mm thick of wall care putty to achieve smooth surfaces and applying two coats of Oil Bound Distemper of approved shade/tint complete all as specified.

M&L for preparation of new steel surfaces of any description , over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat red oxide primer all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed.

M&L preparation surface of wood and wood based material new or old of any description and girth and treated with creosote oil complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based materials description n exc 10cm width or girth and applying two coat of synthetic enamel paint (ordinary tint) over pink primer surfaces when unconnected with other painting or when painted in different tint complete all as specified and directed.

M&L preparing old wall surfaces by washing rubbing down and stopping of distempered or any painted surfaces and priming with alkali resistant primer paint and applying two coats of cement base paint by roller finish complete all as specified and directed.

M&L preparing new plastered surfaces by priming with alkali resistant primer paint and applying two coats of cement base paint (Asian paint/Berger/) by roller finish complete all as specified and directed.

Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete all as specified.

M & L for RCC in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc type nominal mix (1:1.5:3) (20 mm graded aggregate) all as specified and as directed.

M & L for RCC in Columns, pillars, piers, posts and struts type nominal mix (1:1.5:3) (20mm grade aggregate ) all as specified and as directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M & L for PCC 1:4:8 Type D2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

S&F extruded fancy type Brass handles fabricated type of size 100 mm complete all as specified and directed.

S&F Sheet glass, 5.50mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading complete all as specified and directed

S&F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc.Fe -290 (Gde E - 165 ) complete all as specified .

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates including distance pieces , cleats , plates , weldind /rivets/ bolts etc complete all as specified.

S&F for vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC flushing cistern 10 liters low level, PVC pipe connection suitable to joint flushing cistern to water closet fixed on 'P' or 'S' trap, lime concrete bedding complete all as specified and directed by Engineer-in-Charge.

S&F in repair Vitreous China EWC with P or S Trape including seat cover closed pattern with flats bottom and cover and MS CP hinging device, PVC flush bend pipe incl PVC Flushing cistern 10 Ltr Capacity, Low Level Valve Less , Symphonic Action type , White , with inlet, Ball Valve, Float and handle includind 32 mm dia PVC Flush pipe , a pair of cast iron Brackets duly painted / Erecting Stand including Cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items af any description , complete as specified and as directed.

S & F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

S & F Vitreous China Urinal, full stall type, white fixed with Urinal, bowl type or half stall pattern, basin only including connections to flushing pipe and outgoing pipes fixed complete all as specified and directed.

S&F in repairs Brass CP 2-in-1 Bibcock with flange complete all as specified and directed.

S & F in repair Brass CP WHB mixer for mixing hot & cold water screwed down for iron pipe and fixed.

S&F in repairs 15 mm bore CP health Foucet cock with Flexible pipe 1 m long complete all as specified and directed.

S&F in repair soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs Toilet roll holder with stainless steel flap of complete all as specified and directed.

S & F Brass tubular towel rail 20 mm dia , 60 cm long including brackets complete all as specified and directed.

S & F in repair corner glass shelf with bracket complete all as specified.

S&F in repairs CP single lever wall mixer 3-in-1 system with provision for bath hand shower & overhaed shower complete with 115 mm long bend pipe connecting legs & wall flange (without hand & over head shower) complete all as specified and directed.

S&F in repairs Brass CP angular stop cock fancy type 15mm bore with Capstan heads complete all as specified and directed.

Material & Labour for applying Two or more coats (over 1 mm thick wall care putty ) of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over New surfaces. on New or previously untreated surface all as specified and directed .

M&L for preparation of New wall surface and applying two finishing coat of oil bound distempering over 1mm of wall care putty and one coat of wall primer and complete all as specified and directed.

S&F Gun metal gate valve class I (ISI) marked with iron wheel head , screwed both ends for iron pipe , suitable for following bore of pipe including taking down old exesting unservisable gate valve of dia 20 mm complete all as specified and directed.

M&L Rendering, 15 mm thick in CM 1:4, in two layers, first 5 mm thick with approved Water proofing compound @ 3% by the weight of cement or as per manufacturers instructions over a coat of 10 mm thick base coat finished even and smooth complete all as specified and as directed by Engineer-in-Charge. Note : WPC shall be measured and paid separately.

M&L for 10 mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement.

M & L for hardcore of broken brick/stone or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and remmed to a true surface, complete all as specified

M & L for 75mm thick cement concrete type D-2 1:4:8 using 40mm graded aggregate as in sub base to floor finished rough to receive finishes. complete all as specified and as directed by the Engineer-in-Charge

M & L for 75mm thick plain cement concrete type C2 1:3:6 (using 20mm graded stone aggregate) as in plinth protection finished even & smooth without using extra cement and with sealing compound complete all as specified and directed.

S&F for 3mm thick Figured glass, pin head type and glazing with fixed in alumnium frame/ oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

S& for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F for PVC (SWR) junction single equal or unequal 75mm dia complete all as specified and directed.

S&F for PVC (SWR) junction single equal or unequal 100/110mm dia complete all as specified and directed.

S&F for PVC (SWR) vent cowl 75mm dia complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified

M & L for removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge.

S&F for 1000 liters capacity rotational moulded polyethylene water storage tanks(cylindrical verticle with closed top) hoisted and fixed in position all as specified in SSR Part-I and as directed.

S&F 20mm bore brass gate valves,with iron wheel head,screwed both ends for iron pipes and fixed complete all as specified and as directed.

M&L for concrete bed to drain pipes including packing under and hunching against the sides of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 110mm dia pipes.

S&F Butt hinges of 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed.

M / L precast cement concrete block massonry with solid blocks nexc 10 cm in width and setting in CM 1:4 type C1 1:3 :6 (20mm graded aggregate ) complete all as specified .

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, including 20 mm dia PVC conduit and accessories concealed on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light/Fan point controlled by one switch.

Description all as per Srl item No. 152 here in before but for socket outlet point 5 Amp on Independent board.

Description all as per Srl item No. 152 here in before but for socket outlet point 5 Amp on same board.

Description all as per serial item No 152 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.

Description all as per Srl item No. 152 here in before but for one bell point controled by one bell push .

Description all as per Srl item No. 152 here in before but for one light point controlled by two way switch.

Description all as per Srl item No. 152 here in before but with 2.5 Sqmm cable for socket outlet point 5 Amp on Independent board.

Supply and fixing modular switch 1 way 6 A module 230/250 volt , AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fixing modular sockets 6A 2/3 pin combined 2 module, with frame and cover complete 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module with frame and cover complete 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fixing modular switch 16A 1 module with frame and cover complete 230/250 Volts, 50 Hz , AC supply, ISI Marked, c with cover plate omplete all as specified and directed.

Supply and fixing LED light fitting with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

S & F LED Luminaries 600mm x 600mm 36 watt, 220 V, AC recessed type with hifg efficiency PMMA diffuser soft galre free light complete with driver, holders and LED lamps suitable for roof ceiling including connecting up with 3 core flexible wire complete all as directed and specified.

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. Make : Cona , Plaza, Anchor .

S & F Exhaust fan 230 volts , 250mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall Make Bajaj/Havell's/CG.

Supply and fix in repairs MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. Make: Schnieder/GE/C&S.

Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed

Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's.complete all as specified and directed

Supply and fixing of hot water Geysers of 25 ltrs capacity 5 star rated vertical type includng fixing of bolts , nuts grouted into the wall , and necessary cement work , making good of disturbed surface of wall , giving electric and water connection and testing after installation.

S&F heat resistant PVC connection pipe for hot and cold water 450mm long 15mm dia all as specified and directed.

Supply & laying galvanized steel tubing, medium grade laid in trenches/floor/wall and joined including necessary fittings such as bends, elbow, tees, sockets, etc for 15mm dia pipe all as specified and directed.

Supply and Fix of Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) all as specified and directed

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core Iincluding laying in trench or fixed on wall through clamps complete all as specified and as directed by Engr-in-Charge.

Excavation in trenches not exc 1.5 m wde and 1.5 m deep for taking out/laying of UG cable/GI pipe of any dismeter in soft/loose soil and getting out complete all as specified and directed

Returning and filling including spreadking levelling watering and well ramming in layers not exc 25 cm thick soft/loose soil complete all as specified and directed

Removing excavated material at a distance n exc 50m and deposited where directed at a level not exc 1.5 above the starting point for soft/lose soil complete all as specified and directed

M & L for sand filing in treances for providing sand cushion for protection of UG cable complete all as specified and directed.

Supply and laying of sub class B bricks locally available alying perpendicular of UG cable complete all as specified and directed.

Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified.

Supply and fix switch piano flush type, single pole , 5/6 Amps, one way complete all as specified.

Supply and fixing Bell push, flush type, 5 amp 1 way 6 A module 230/250 volt with frame and cover complete , AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fix switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified.

Supply and fix socket outlets 2 in 1, 3 pin, 5/6 Amps flush type230/240 V complete all as specified and as directed. (For Same Board only)

Supply and fix switch socket combination 5 in 1 , 6 pin , (5/16 Amps ) flush type controlled by one switch complete all as specified.

Supply and fixing piano switch 2 way 6 A module 230/250 volt , AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fixing call bell ding dong, AC, 230 V, Single pole ISI marked all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fixing LED batten fittings 1x18 Watt complete pre wired fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one. MAKE: surya,crompton or havells

S&F lamp holder, insulated body, with back plate for batten fitting complete. Make- Havells/anchor/Legrand.

Supply and fix ininverter LED bulb 12 Watt B22 base Color complete including taking down old unserviceable one all as directed. MAKE: philips, surya,crompton, or havells

Supply and fix ininverter LED bulb 20 Watt B22 base Color complete including taking down old unserviceable one all as directed. MAKE: philips, surya,crompton, or havells

S & F in replacement of LED / Bulk head Light fitting with lamp 1 x 9 watt including LED light driver, holder, LED lamp and connection up to ceiling rose with three core wire complete with necessary connection including taking down old unserviceable one

Supply and fixing LED security Building light LED 25 Watt , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete. MAKE: Surya, Crompton, Havells

Supply and fix in repairs MCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified. . (Note : MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule . Note : Copper thimble shall be used for connection of cable .

Supply and fix MCCB TPN, 240 Volts, 100 Amps, 10 kA rupturing capacity415 Volts complete all as specified and directed including taking down old one.

M & L Sub main wiring with two run single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM.

Taking down existing energy meter and refixing the same after completion on the original location all work all as directed by Engr-in-Charge

Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I.

Supply, lay in trenches, floors ,fix on wall/pole, passing through pipes etc.,LT UG cable , 1100 volts grade, PVC/ XLPE insulated , with multistranded aluminium conductors, armoured with galvanised steel wire or tape ,gland, lugs etc , of size 16 Sq.mm 4 core , confirming to IS specifications :-

M&L for fixing in replacement GI tubing 50 mm bore light grade, on poles, on walls, under floors, road crossing as reqd at site complete all as directed by Engr-in-Charge. Note : Clamps, Nut bolts, saddle etc will be measured and paid seperately.

Taking down existing water heater geyser and refixing the same after completion of work on the original location all work all as directed by Engr-in-Charge

Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed by Engr-in-Charge

S&F GI Bracket of dia 40 mm light grade with 1.2 mtr length including fixing the bracket and connection etc all as directed and as directed by engr-in-charge.

Supply, laying & testing cable XLPE insulated PVC inner sheathed, armoured with galvanized steel strip or wire heavy duty underground with stranded aluminum conductor 16 sqmm 2 Core 1100 Volts grade laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing complete all as specified and directed.

Supply and fixing factory made IP-65 (Dust and power jet Proof according to IEC 60529) opaque street light junction box of size 260 mm x 210 mm x 116mm made of high quality polycarbonate (shock proof, rust free, corrosion free acid and chemical resistant, fire retardant having high impact (IK 08) totally insulated made of halogen and silica free recyclable material, UV resistant having high grade gasket made of polyurethane with copper terminal , MCB SP 6 Amps rating 10 KA with locking arrangement and 2 Nos M40 size cable gland and one M32 size gland suitable up to 35 Sqmm cable etc complete all as specified and directed.

Supply and fixing PVC Insulated and sheathed three core Heavy duty cables 1100 volts 03 core having multi stranded aluminium conductor service cable size 4 sqmm complete all as specified and directed.

M&L 40 mm bore steel for tubing medium grade ISI marked for protection of cable including necessary joint including taking down old u/s one complete all as specified and as directed.

Supply and fixing street light timer panel made of polycarbonate body including Digital Timer Switch, 10A and Single phase Contactor, MCB and wiring if any required with min 1 Sqmm copper conductor cable and instrument wiring with 1.5 Sqmm fine, terminal blocks etc complete all as specified and directed.

M/s A L Traders (BID ID -3393948)

DWEL ENTERPRISE (BID ID -3393839)