E-TENDER FOR RENOVATION AND RESURRECTION OF ELECTRICAL INSTALLATION LIKE REPLACING OF OLD TRANSFORMER OF 250 KVA WITH NEW TRANSFORMER OF 800 KVA, INSTALLATION OF NEW ISOLATOR PANEL, DISTRIBUTION PANEL FOR EACH FLOOR, CAPACITOR PANEL

Amount

NS Items

Providing and fixing of ACB following rating and breaking capacity and with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 1600A, 4P ACB MDO type with Thermal mag. based. Make- L&T/ Schneider/ ABB or equivalent (approved by Engineer-in-Charge)

Providing and fixing of ACB following rating and breaking capacity and with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 2000A, 4P ACB EDO type with Microprocessor based. Make- L&T/ Schneider/ ABB or equivalent (approved by Engineer-in-Charge)

Providing and fixing of Multifunction Meter in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. FOR MAIN INCOMER. Make- L&T/ Schneider/ ABB or equivalent (approved by Engineer-in-Charge)

Providing and fixing of Multifunction Meter in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required FOR OUTGOING SIDE. Make- L&T/ Schneider/ ABB or equivalent (approved by Engineer-in-Charge)

Providing and fixing of CT's in existing cubicle panel board including making connections etc as required 100/5A Cl- 1.0. Make- AE/ Nippen/ Kappa or equivalent (approved by Engineer-in-Charge)

Providing and fixing of CT's in existing cubicle panel board including making connections etc as required. 150/5A Cl-1.0. Make- AE/ Nippen/ Kappa or equivalent (approved by Engineer-in-Charge)

Providing and fixing of CT's in existing cubicle panel board including making connections etc as required. 200/5A Cl-1.0. Make- AE/ Nippen/ Kappa or equivalent (approved by Engineer-in-Charge)

Providing and fixing of CT's in existing cubicle panel board including making connections etc as required. 250/5A Cl-1.0. Make- AE/ Nippen/ Kappa or equivalent (approved by Engineer-in-Charge)

Providing and fixing of CT's in existing cubicle panel board including making connections etc as required. 400/5A Cl-1.0. Make- AE/ Nippen/ Kappa or equivalent (approved by Engineer-in-Charge)

Providing and fixing of CT's in existing cubicle panel board including making connections etc as required. 600/5A Cl-1.0. Make- AE/ Nippen/ Kappa or equivalent (approved by Engineer-in-Charge)

Providing and fixing of CT's in existing cubicle panel board including making connections etc as required. 800/5A Cl-1.0. Make- AE/ Nippen/ Kappa or equivalent (approved by Engineer-in-Charge)

Providing and fixing of CT's in existing cubicle panel board including making connections etc as required. 1000/5A Cl-1.0. Make- AE/ Nippen/ Kappa or equivalent (approved by Engineer-in-Charge)

Providing and fixing of CT's in existing cubicle panel board including making connections etc as required 2000/5A Cl-1.0. Make- AE/ Nippen/ Kappa or equivalent (approved by Engineer-in-Charge)

Providing and fixing of 400 A, 4P Changeover Switch. Make- Havells/ Nippen/ HPL or equivalent (approved by Engineer-in-Charge)

Providing and fixing of Electrolytic Aluminium of E91 grade Bus Bar, make of Hindalco/Balco in existing cubicle panel board including making connections, etc. as required. Busbar: 20X6X1 (120 Amp). Make- Hindalco/ Balco/ Jindal or equivalent (approved by Engineer-in-Charge)

Providing and fixing of Electrolytic Aluminium of E91 grade Bus Bar, make of Hindalco/Balco in existing cubicle panel board including making connections, etc. as required. Busbars: 25X6X1 (150 Amp). Make- Hindalco/ Balco/ Jindal or equivalent (approved by Engineer-in-Charge)

Providing and fixing of Electrolytic Aluminium of E91 grade Bus Bar, make of Hindalco/Balco in existing cubicle panel board including making connections, etc. as required.Busbar: 40X6X1 (240 Amp). Make- Hindalco/ Balco/ Jindal or equivalent (approved by Engineer-in-Charge)

Providing and fixing of Electrolytic Aluminium of E91 grade Bus Bar, make of Hindalco/Balco in existing cubicle panel board including making connections, etc. as required.Busbars: 20X10X1 (200 Amp). Make- Hindalco/ Balco/ Jindal or equivalent (approved by Engineer-in-Charge)

Providing and fixing of Electrolytic Aluminium of E91 grade Bus Bar, make of Hindalco/Balco in existing cubicle panel board including making connections, etc. as required. Busbar: 50X10X1 (500 Amp). Make- Hindalco/ Balco/ Jindal or equivalent (approved by Engineer-in-Charge)

Providing and fixing of Electrolytic Aluminium of E91 grade Bus Bar, make of Hindalco/Balco in existing cubicle panel board including making connections, etc. as required.Busbars: 80X10X1 (800 Amp). Make- Hindalco/ Balco/ Jindal or equivalent (approved by Engineer-in-Charge)

Providing and fixing of Electrolytic Aluminium of E91 grade Bus Bar, make of Hindalco/Balco in existing cubicle panel board including making connections, etc. as required.Busbars: 80X10X2 (1600 Amp). Make- Hindalco/ Balco/ Jindal or equivalent (approved by Engineer-in-Charge)

B Providing and fixing of Electrolytic Aluminium of E91 grade Bus Bar, make of Hindalco/Balco in existing cubicle panel board including making connections, etc. as required. bus bars:100X10X2 (2000 Amp). Make- Hindalco/ Balco/ Jindal or equivalent (approved by Engineer-in-Charge)

Providing and fixing following rating Power Contactor, in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required for Capacitor Panel. 50Kvar Capacitor duty Contactor, 220V AC Coil. Make- L&T/ Schneider/ ABB or equivalent (approved by Engineer-in-Charge)

Providing and fixing following rating Power Contactor, in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required for Capacitor Panel. 25Kvar Capacitor duty Contactor, 220V AC Coil. Make- L&T/ Schneider/ ABB or equivalent (approved by Engineer-in-Charge)

Providing and fixing of 25A, AC-3 duty TP, Power Contactor, 220V AC Coil Make- L&T/ Schneider/ ABB or equivalent (approved by Engineer-in-Charge)

Providing and fixing of 20A, AC-3 duty TP, Power Contactor, 220V AC Coil. Make- L&T/ Schneider/ ABB or equivalent (approved by Engineer-in-Charge)

Providing and fixing following rating CAPACITORS, in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required for Capacitor Panel.50Kvar Capacitor, Normal duty, MPP H-Type 440V. Make- L&T/ Schneider/ ABB or equivalent (approved by Engineer-in-Charge)

Providing and fixing following rating CAPACITORS, in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required for Capacitor Panel. 25Kvar Capacitor, Normal duty, MPP H-Type 440V Make- L&T/ Schneider/ ABB or equivalent (approved by Engineer-in-Charge)

Providing and fixing following rating CAPACITORS, in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required for Capacitor Panel. 5Kvar Capacitor, Normal duty, MPP H-Type 440V. Make- L&T/ Schneider/ ABB or equivalent (approved by Engineer-in-Charge)

Providing and fixing following rating CAPACITORS, in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required for Capacitor Panel. 10Kvar Capacitor, Normal duty, MPP H-Type 440V. Make- L&T/ Schneider/ ABB or equivalent (approved by Engineer-in-Charge)

Supplying and laying of the following sizes of XLPE insulated Aluminium Armoured power cables as per Requirement. 11 KV grade 3C x 185 XLPE Arm. Cable. Make- Havells/ Polycab/ KEI or equivalent (approved by Engineer-in-Charge)

Supplying and laying of the following sizes of XLPE insulated Aluminium Armoured power cables as per Requirement. 1.1 KV grade 3.5 x 185 XLPE Arm. Cable. Make- Havells/ Polycab/ KEI or equivalent (approved by Engineer-in-Charge)

Supplying and making end termination of the following sizes of 1.1 KV grade XLPE armoured cable with Brass compression gland, lugs on all cores, connections etc. as required. 3.5 x 185. Make- Comex / Dowells/ Comet or equivalent (approved by Engineer-in-Charge)

Supply Installation, testing and commissioning of Distribution Transformer of rating 800 KVA, 11/ 0.433 K.V, 3 phase,50 Hz , BIS Level II ONAN Delta Star connected, Dyn11 vector group & suitable for outdoor installation complete with cable box on H.V./ L.V. side to accommodate 3 core X 185 sq. mm H.T. XLPE cable on HT side & 3R x 3.5c x 185 sq.mm Aluminium cable 1100 V on L.T. side. The No Load loss and Full Load losses should be as per prevailing norms of BESESS and as per Central Testing Laboratory.The transformer shall be fitted with complete standard fittings & accessories and with first filling of transformer oil. The Transformer should be complete with all its accessories viz. oil level gauge flush type, flange type drain valve with plug, filter valve with plug, magnetic oil level gauge with low level alarm,silica gel breather, air release plug, Dial type Thermometer, Thermometer pocket, off load type externally operated tap changer having taps - 10%, & +10% and no. of steps 5 including principle tap, Conservator with oil filling point & drain plug/valve ,Explosion Vent , additional neutral bushing for separate earthing , Unidirectional rollers, pulling eyes, under base channels with skids, radiator bank, inspection opening with cover etc. The transformer should be equipped with Name, Rating & Diagram plate, earthing terminals, lifting lugs, also with Cable Termination Box on both side with LT Side Busing complete in all respect. The valves should be of brass/gunmetal flange type.The tap changer should be flange type (to avoid leakage). Make- Kirloskar/ GE/ Kotson/ Voltamp/Crompton or equivalent (approved by Engineer-in-Charge)

Providing & fixing 50mm x 6mm G.I. strip on surface, in recess or in ground including connections etc. as required Make- Luxmi Trading Co./Super/British Stander/Phonix or equivalent (approved by Engineer-in-Charge)

Supply & burrying of 600mm x 600mm x 3 mm copper plate, vertically for earthing with its top at least 3 meters below ground level complete with 20 mm G.I. pipe for watering funnel, 300 mm square C.I. frame with hinged cover, masonry housing, alternate layers of coke and salt at least 150 mm thick alround including excavation and back filling etc. complete in all respects. Make- Luxmi Trading Co./Super/British Stander/Phonix or equivalent (approved by Engineer-in-Charge)

Providing and fixing M.V. danger notice plate of 200 mm x 150 mm made of mild steel, 2 mm thick and vitreous enamelled painting white on both sides, and with inscription in single red colour on front side as required. Make- Metal Craft/ Samrita/ Clickforsign or equivalent (approved by Engineer-in-Charge)

Providing and fixing H.V. danger notice plate of 250 mm x 200 mm made of mild steel, 2 mm thick and vitreous enamelled painting white on both sides, and with inscription in single red colour on front side as required . Make- Metal Craft/ Samrita/ Clickforsign or equivalent (approved by Engineer-in-Charge)

S/F of shock treatment chart (prescribed under I.E.rules) duly framed with glass and supported from back with hard board with supply of all material labour T & P etc for proper completion of work. (Approx front area = 1.20 sq M). Make- Flip chart/ U safe/ Sole safe or equivalent (approved by Engineer-in-Charge)

Supply and fixing of First aid box as approved by Indian red cross conforming to IS : 2217. Make- Supreme/ Apex/ Sameeksha or equivalent (approved by Engineer-in-Charge)

Supplying and laying of 1000 mm wide x 12 mm thick chequered rubber matting of tested quality to withstand 15KV dielectric strength as per IS 5424 complete in all respects. Make- Saina Exports/ Highrange Rubber/ Somani Enterprises or equivalent (approved by Engineer-in-Charge)

PANEL ENCLOSURER for all panels. CRCA sheet enclosure. Panel will be fabricated with 16SWG CRCA sheet steel for load bearing surfaces and 16SWG for non load bearing surfaces. Make- Jindal/ Tata/ Prakesh surya. or equivalent (approved by Engineer-in-Charge) Note: This work will be executed as per the requirement of site and the entire satisfaction of Engineer-in-Charge

WIRING for all panels (Harness for starter & metering, Thimbles, Ferrules, Sleeves, PVC channel, Gourmets, Braided wire for earthing etc). Note: This work will be executed as per the requirement of site and the entire satisfaction of Engineer-in-Charge

HARDWARE for all panels (Filter, Nuts, Bolts, Spring washers, Door hinges, Door Locks & Key, Lifting hocks, Base channel, C-type Channels, Finger type Insulators & Support etc). Note: This work will be executed as per the requirement of site and the entire satisfaction of Engineer-in-Charge

ACCESSORIES for all panels (Danger plate, Feeder detail Inscription plates, Acrylic/Bakelite/Perforated sheet cover for busbar, Door gasket etc). Make- Metal Craft/ Samrita/ Click for sign or equivalent (approved by Engineer-in-Charge) Note: This work will be executed as per the requirement of site and the entire satisfaction of Engineer-in-Charge

Manufacturing Cost(Labour + Overheads) (Fitting of Busbar, Panel enclosure, Circuit breaker / SFU / Feeder, Starter / Metering wiring etc) Note: This work will be executed as per the requirement of site and the entire satisfaction of Engineer-in-Charge

Providing, laying and fixing of 3.5 Core 95 sq mm Al Armored cable complete in all respect.Make- Havells/ Polycab/ KEI or equivalent (approved by Engineer-in-Charge)

Providing and fixing of 4 way VTPN DB incomer 250 amp out going 125 amp 16ka Each 3 nos. Make- L&T/ Schneider/ ABB or equivalent (approved by Engineer-in-Charge)

Providing and installation of 12 Way SPN DB incomer 32amp DP And outgoing 10 amp Each. Make- L&T/ Schneider/ ABB or equivalent (approved by Engineer-in-Charge)

Buyback of old Transformer of 250KVA taking out from site without damage of existing platform structure and including all type of charges like loading, unloading, transportation etc.

Bidder Name

Amount

Lambnet Enginering Private Limited(GSTN-07AACCL7559E1ZD)

Highlight Associates and Contractors(GSTN-06AAKFH2063G1ZK)

Lambnet Enginering Private Limited

Highlight Associates and Contractors