SPECIAL REPAIR TO BLDG NO 33 ( A ) RA LINE ( PERS COOK HOUSE), PROVN OF STORM WATER DRAIN FROM STP TO MAIN DRAIN AT 283 FD REGT, SRC LINES AND ADDN/ALTN OF MANHOLES AND SEWR LINE AT VAIDYA ENCLAVE MD ACCN UNDER AGE B/R-I AND AGE E/M-I OF GE ( NORTH )

Amount

Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed .

M & L for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in and including PVC concealed conduit of any size/dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth duly for One tube light/Bulb/ street light point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed

All as per serial item No 02 here - in - before but One fan / Exhaust fan point controlled by one, one way switch 05 / 06 Amps.

All as per serial item No 02 here - in - before but One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 02 here - in - before but One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 04 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board.

S&F Modular Switch, 1 module, 6A, 2/3 pin combined, AC, 240V, ISI Marked complete all as specified and directed

S&F Modular Socket, 2 module, 6A, 2/3 pin combined, AC, 240V, ISI Marked complete all as specified and directed.

S&F Modular Socket, 2 module, 6A / 16A, 2/3 pin combined, AC, 240V, ISI Marked complete all as specified and directed

S&F Modular Switch, 1 module, 16A, AC, 240V, one way ISI Marked complete all as specified and directed

S & F 2 pin, 6 A, 250 V B22 base bulb holder conforming to IS 371: 1999 and having terminal capacity 3 X 1.5 mm² with IK 04 and IP 20 protection complete all as specified in IS 732: 2019 and directed .

S&F 9 watt LED bulb 2 pin B22 base,100 Lumems per watt, PF≥0.9,180° wide beam angle voltage surge protection 4kV ,6500K cool white,operating voltage 100-240V complete all specified and directed.

S & F 20 W surface / wall mounted, 4 feet LED T-5 batten having PC diffuser, luminous efficacy of ≥100 lumen/W, CRI > 80, PF > 0.9, CCT 6500K, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in extruded aluminium with white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, input frequency 50- 60 Hz, 50000hr run,including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed .

S & F decorative LED tube light fitting 10 watt wall mounted with extruded polycarbonate ,integrated lamp & driver with opal diffuser and decorative end plates complete with all accessories and fixing material complete all as specified and directed.

S&F in repairs 25 Watt pewired pressure die cast housing LED bldg security light luminaire IP 66 ingress protection ,Efficacy 120lm/watt ,built-in surge protection,electronic driver,50000hr run, incl suitable OD GI pipe bracket, two nos mounting clamps with nuts, bolts and washers, electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose/junction box to the fixture complete all as specified and directed .

S & F ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed .

M & L for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 06 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing incl taking down old u/s submain wiring complete all as specified & directed.

S & F sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces incl taking down old u/s DB's complete all as directed.

S & F MCB, SP, AC, 240 volts "C" series capacity of 06 to 32Amps, 10kA and making connections complete all as specified & directed.

S & F Isolator, DP (Double Pole), AC, 240 volts, B series capacity 32 Amps and making connections complete all as specified & directed.

M & L for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

S & F propeller type AC ventilating fans, 230 volts, 50 Hz, heavy duty, 1350 RPM, 300 mm sweep (Exhaust fan) copper winded motor ,steel body and blades protected by bird guard complete including cutting the hole of required size in wall & finishing the same to match the adjoining surfaces and connecting with and including PVC insulated, three core, white 23/.0076 copper cable, rubber insulated from ceiling rose to exhaust fan motor and writing MES No complete all as specified and as directed.

S & F BLDC without remote ceiling fan 1200mm sweep, 220CMM air delivery,with remote including suitable step fan regulator ,BEE 5 star energy rated, minimum service value≥6,copper winded motor ,powder coated aluminium tri blade, dynamically balanced including canopys,down rod size upto 1.2m,shackel assembly,safety pin,nut bolt etc,and connecting with 3 core flexible Cu conductor cable of appropriate size from ceiling rose/junction box to the fan and writing MES No. complete all as specified and directed .

S & F electric water heater,storage type steel body with inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece etc complete all as specified and directed .

Taking down existing Exhaust fan 250 / 300 mm of any size, CeiIing cable end,dismentalling blades ,make one set of three blades and keep them safe to deposited to E/M yard complete all as directed.

Taking down existing ceiling fan of any size, CeiIing cable end,dismentalling blades ,make one set of three blades and keep them safe to deposited to E/M yard complete all as directed.

Taking down existing water heater of any size,capacity disconnecting connection and keep them safe to deposited to E/M yard complete all as directed.

Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified & directed.

M & L for 50 mm thick ( average thickness ) nominal mix concretes 1:2:4 type B-O(using 12.5 mm graded stone aggregates) as in padding on roof finished even and fair without using extra cement complete all as specified and directed.

M & L for 10mm thick cement paster in CM 1:4 mixed with WPC @ 2 % by weight of cement finised even and smooth without using extra cement on roof surface when concreate is green and wall Note:- WPC will be measured and paid seperately as supply only rate.

Supply only water proofing compound complete all as specified and directed .

M & L for cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed evenly by a tack coat @ 1.20 kg per Sqm using 85/25 grade industrial hot blown bitumen , over it laid with 3mm thick APP modified polymeric water proofing membrane reinforced with non-woven polyester fabric (weight not less than 160 Gm per Sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.20 kg per Sqm as per manufacturer’s instructions, complete all as specified & directed. Note:- Quoted rate cleared to be included for taking down of existing water tank on roof, cleaning and refixing of the same position after roof treatment

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc complete all as specified & directed

M & L for brick work with sub class fly ash bricks straight or curved on plan exc 6 m mean radis built in CM 1:6 complete all as specified and directed .

M&L for old sizebrickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks Complete all as specified and directed.

Taking down cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed .

M & L for 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.

M & L for applying 15 mm thick rendering in CM 1:4 on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @ 3% by weight of cement or as per manufacturer instructions, complete all as specified and directed. Note:- Water proofing compound shall be measured and paid sepratly

M&L for 5 mm thick rendering on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified.

M & L for Preparation of new plastered surface of ceiling and applying two coat of white wash complete all as specified & directed.

M & L for Preparation of old surface after complete removal of existing treatment by mechanical means complete all as specified and directed.

M&L for applying 3mm thick wall care putty making smooth surface complete all as specified and directed.

M&L for applying one coat of primer complete all as specified and directed.

M&L for applying Two coat of OBD complete all as specified and directed

M&L for applying two or more coat of exterior emulation paint @ 1.67 litre/ 10 sqm over and including primer coat of exterior primer applied @ 2.20 kg / 10 Sqm using roller for painting complete all as specified and directed.

M & L for Preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper over one coat of primer using roller for painting complete all as specified & directed.

M&L for Preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and applying two or more coat of exterior emulation plaint applied @ 1.67 ltr/ 10 sqm over and including primer coat of exterior primer applied @ 2.20 kg / 10 Sqm using roller for painting complete all as specified and directed.

Dismantling timber scantlings 40 sq.cm and over in section, in any position unframed work complete all as specified and directed

M & L for rolled mild steel in Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats similar work conforming to Fe 410 -W (Gde E- 250) quality A etc complete all as specified & directed.

S & F in repairs Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed .

S&F MS angle iron as in door framed work conforming to Fe 290(Gde E-165) including hold fast tie rod, hinges and one shop of red oxide primer etc. complete as specified and directed.

Dismantling asbestos cement (corrugated, semi-corrugated, etc) sheet in roof coverings complete all as specified and directed .

S&F pre-painted galvalume aluminium zinc coating corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed .

S&F pre-painted galvatume aluminium zinc coating plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/ridges etc, fixed with self tapping screws as specified.

M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier complete all as specified and directed .

Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) exc 1.50 m and n.exc 4.00 Sqm each complete all as specified and directed .

Taking down chowkhat or frames of door/ window / ventilators with shutter(Without taking off shutter from the frame) n.exc 1.50 m each complete all as specified and directed .

M & L for anodised aluminium Powder Coating (minimum thickness of powder coating 50 micron) frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

M & L for anodised aluminium Powder Coating of Approved colour (Thickness or powder coating not less than 50 micron) sliding window and ventilator shutters, sliding (Two/Three) type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium and Sliding Arrangement Complete fittings as required complete all as specified and directed.

M & L for anodised aluminium Powder Coating of Approved colour (Thickness or powder coating not less than 50 micron) door Shutter, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium Complete fittings as required complete all as specified and directed.

S&F 4mm thick, black tinted glass panes fixed to aluminium doors/windows/vents with necessary rubber gaskets complete all as specified and directed.

S&F, in repairs, Double action floor spring, hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel, heavy duty and fixed complete all as specified

S&F in repairs , Mortice lock, brass, four lever, verticle type, size 75mm complete all as specified and directed.

S & F 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws,complete all as specified and directed .(Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65X100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed Note No 1:- M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note No 2: WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed .

S & F Factory made Double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed . Note No 1:- M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note No 2:- WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

S & F Factory made solid wire gauzed PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing wire gauzed i.e. panel will be of wire gauze in lieu of single side prelam PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly → supplied and fitted to chowkats complete all as specified and directed.

M & L for Machine cut Pre Polished kota stone slab flooring 20-25mm thick laid down and including 15 mm thick screed bed in cement mortor 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified and directed.

M & L for Machine cut Pre Polished Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid down and including 10 mm thick rendering in cement mortar 1:4 as backing coat and rubbing and polishing complete complete all as specified and directed.

S&F 100 mm butt hinges, meium weight brass complete all as specified and directed .

S&F Brass barrel tower bolt 200 mm, extruded section complete all as specified and directed .

S& F 300mm long Brass, sliding door bolt with sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed .

S & F 125mm Extruded brass handles,fabricated type polished complete all as specified and directed .

S&F, Mortice lock, brass, four lever, verticle type, size 75mm complete all as specified and directed.

S&F, in repairs, aluminium (Die cast) body, Door closer, hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed ..

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store andd rubbish off the premises complete all as specified and directed .

M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick square/ rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in loors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 complete as specified and directed.

M&L for light shade, vitrified tiles, 7 to 8 mm thick (minimum), (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm (including 600mmx600mm size) but not exceeding 0.42 Sqm, in flooring set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bedding in CM (1:6) complete all as specified and directed.

M&L for vitrified tiles, 7 to 8 mm thick (minimum), (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm (including 600mmx600mm size) but not exceeding 0.42 Sqm, in skirting/dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450mm x 350mm x 7mm/600mmx300mmx7 mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including rendering 10mm thick in cement mortar (1:4) , as backing coat complete all as specified and directed.

M&L for 18 -20mm thick BLACK/RED(LAKHA) granite factory made bull nosed, polished (table rubbed and polished) as in jambs, wall,window cills, cooking platform and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing laid over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges, making hole for gas pipe complete all as specified and directed.

M&L for rounding to edges of stone slabs two edge full round, such as in steps,cooking platform and other similar situation complete all as specified and directed.

Dismantling wall and ceiling boards(fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified and directed .

M&L, for 18/19mm thick Soild WPC board, exterior grade, prelaminated one side with decorative choice laminations and other side balanceing white lamination, fixed with screws to WPC frame work in cup boards, rebated or flat edged fancy handle , Magnite lock,including 0.8 mm thick mica complete all as specified and directed.

S&F in repairs , continuous (piano) hinges, mild steel bright finish or electrogalvanised, width of flap 40 mm complete all as specified and directed.

Dismantling water tank of capacity exc 500 ltrs but not exc. 1000 Ltrs complete all as specified and directed .

S&F 500 litres capacity White rotational moulded polyethene water storage tank ( cylinderical verticle with closed top) hoisted and fixed in position all as specified in SSR Part-I. complete all as specified and directed .

S&F 1000 litres capacity White rotational moulded polyethene water storage tank ( cylinderical verticle with closed top) hoisted and fixed in position all as specified in SSR Part-I. complete all as specified and directed .

S&F 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) all as specified and directed

S&F in repairs gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20mm bore complete all as specified and directed .

Taking up or down steel tubing with all fittings for 20mm bore of pipe complete all as specified and directed.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches and wall complete all as specified. complete all as specified and directed.

M & L for cutting chases for concealed water tubing, pinning in, making good of facings where required and pointing in cement mortar 1:3 to ends or edges etc, cutting not exceeding 10 cm width or girth, complete all as specified and directed.

S&F in repairs angle valve 15mm bore brass chromium plated with captan head screwed for iron pipe complete all as specified and directed .

S&F in repairs stop valves chromium plated , 15 dia bore complete all as specified and directed .

S&F in repairs 15mm brass chromium plated bib cock with wall flange complete all as specified and directed.

S&F in repairs 15mm dia brass chromium plated central hole wash basin mixture fancy type with or without lettered 'Hot' or 'Cold', for mixing hot & cold water with long screwd shanks and fly nut capstan head or unions and screwed to walls complete all as specified and as directed.

S&F 15mm dia chromium plated fancy type wall mixer with over head shower for mixing hot & cold water screwed, fixing and connection to pipes complete all as specified and as directed.

S&F 15mm dia chromium plated fancy type sink mixer with swinging spout (wall mounted model) fixing and connection to pipes complete all as specified and as directed.

S&F in repairs PVC connection 15 mm size with PTMT nuts 450 mm long complete all as specified and directed .

S&F in repairs vitreous china ware EWC combined pattern complete with internal fittings as specified and directed.

S&F in repairs for CP Health Faucet brass body with wall hook and one meter SS braided rubber hose pipe complete all as specified and directed .

S&F in repairs super special colours vitrous china wash hand basin white flat back, size 580x430mm including waster pipe , chromium plated waste coupling 32mm dia , with pedestal / bracket etc complete all as specified and directed

S&F in repairs stainless steel fancy type curtain rod, 20mm dia fixed with braket, incl taking down of old curtain rods complete all as specified and directed .

S&F in repairs Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed .

S&F in repairs, corner glass shelf with bracket complete all as specified and directed.

S&F in repairs brass chromium plated soap dish complete all as specified and directed.

Dismantling of cast iron, PVC or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches if required for 110mm and 75mm bore of pipe complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laying as in floor and complete all as specified and directed.

.Dismantling wall and ceiling boads (fibre, pulp, insulation etc.) or insulation boards/ slab/ blankets, any thickness including aluminium snap grid complete all as specified and directed.

M & L for 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.

S&F Anodised aluminium snap grid frame workframe work for false ceiling all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) all as specified and directed.

M&L for cement concrete 1:4:8, type D-2(40mm graded stone aggregate) as in 75mm thick sub base complete all as specified and directed .

M&L for chequered cement concrete colour tiles glossy finish size 300mm cmx300mmx25 mm thick, with colour pigment, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in cm (1:6) complete all as specified and directed .

M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade, with grey cement and pigment over and including 50mm thick river sand cusion and packing the edges/sides of the blocks with PCC 1:2:4 complete all as specified and directed .

Supply only MS galvanised chain link fencinng of 100x100mm mesh size and 4mm dia wire complete all as specified and directed.

Fixings only chain link fencing including line wires, any mesh, size and type to standards, rails, straininng bolts etc including provision of binding wire complete all as specified and directed. Note : supply only chain link fencing, MS 10mm dia round bars as line wire and MS flat iron shall be measured and paid separately under respective item of this schedule complete all as specified and directed .

S&F mild steel bolts. purpose made.with hexagonal orsquare head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut. exc 10 cm but not exc 15 cm and 12mm dia complete all as specified and directed.

.M&L for heavy duty, exterior grade ceramic tiles (Durastone of Somany/Endura of jhonson or equivalent as approved by GE) of size 300 x300x 10mm thick, set, jointed and pointed in neat cement slurry in trades, landing with white cement and pigment over and including screed bed or bedding layer of 15 mm thick cement mortar (1:6) complete all as specified and directed.

S&F in repairs ornamental and intricate design framed work as in doors or gates of angle or other section with gussets plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering, Doors, etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel, sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete conforming to Fe-290 Gde- E-165 complete all as specified and directed..

M & L for construction of Soakage wells , of size 2.40m dia & 6.00m depth ( effective depth 4.5 m ) in ordinary Soil, Foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber, screen chamber Brick work in CM 1:4, RCC cover slab in M-25/ RR masonry / Filling with brick bats, all as including necessary earth work in any type of soil (soft / loose / hard / dense) all as shown on drg No TD-309 Sh. 1/4 to 4/4. complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick for kitchen with plugs, CP waste coupling, waste pipe and including in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and directed .

S&F, in repairs, 1mm thick, stainless steel plate rack of size 1200mm x 900mm x 180mm complete all as specified and directed.

S&F powder coated approved colour anodised aluminium partition with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame with one or more rebates including S&F 5.50 mm thick plain/tinted glass complete all as specified and directed.

M & L precast cement concrete type B1 1:2:4 (20mm graded graded graded aggregate) in window or door cills, lintels,bressumers, steps,quoin blocks (for use with ma sonry), string courses, copings.kneelers, apex stones, pier caps,columns, posts,boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including cham fers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specified and directed .

Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 metre in depth for foundation etc and for manholes etc n.exc. 10 Sqm on plan and n.exc. 1.5 metre depth and getting out in soft/loose soil complete all as specified and directed.

M & L for PCC ( 1 : 4 : 8 ) Type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M & L for PCC 1:3:6 type C1 using 20mm graded stone aggragate as in bed bricks, coping etc including weathering slightly rounded or chamfered angles and throating making grovves for fixing of man hole cover including necessary form work complete all as specified and directed.

M & L for Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including finishing the top of benching even and smooth using extra cement complete all as specified and directed

Returning ,filling in including spreading ,levelling watering and well ramming of soft/loose soil in layers n exc 25 cm thick complete all as specified and directed.

Removing excavated soil not exceeding 50 m distance and depositing where directed at alevel n exc 1.5 metre above the starting point complete all as specified and directed.

M&L for fly ash Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:4 complete all as specified and directed .

M&L for fly ash Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:4 but except bricks complete all as specified and directed .

M&L for Ultra P E,DWC (Double wall corrugated) pipe confirming IS-16098 Part-2 2013 pertaining structure wall plastics pinning system for sewage 150 and above bore pipe SN8 and all necessary fittings and fixtures complete all as specified and directed.

Demolition of cement concrete as in bed to drain pipe including packing under and haunching against the sides of pipe or as in manhole benching/bed etc complete all as specified and directed .

M&L for Concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 for 150mm bore pipes complete all as specified and directed.

M & L for cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and forming benching as required. Internal dia of pipe 150mm complete all as specified and directed .

M&L for Cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in benching /coping and the like including weathering, slightly rounded or chamfered angles as directed including form work and finishing all exposed surfaces including necessary form work complete all as specified and directed .

M&L TMT steel bars 8mm or 10mm dia in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia all as specified. Complete all as specified and directed .

M&L for Precast cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate as in manhole cover complete all as specified and as directed .

M&L for 75mm thick PCC 1:2:4 TYPE B-O (using 12.5mm graded crushed stone aggregate) as in floor to receive topping layer complete all as specified and directed

M&L for Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M & L for Cleaning of underground Horizontal sewage pipe of any dia upto 200mm (Cleaning length n.exc 30m from manhole to manhole or from manhole to septic tank) including taking off manhole cover and cleaning of manholes of any size and depth and removing waste material/sludge to a distance of n.exc 300m and burrying in a pit and replacing manhole cover in position after cleaning complete all as specified and directed .

M & L for Dewatering of Septic tank soakage well and manhole of any depth in any position by pumping out and removing outside Military/Defence land by mechanical means (trolley mounted) and burying in pits all as directed including digging of pits in any type of soil and covering pits with earth after absorption of water and including providing and spreading required quantity of bleaching powder around the pit or dispose of waste material as per state protocol and washing the top of septic tank & soakage wells and surrounds with fresh water and sprinkling lime to make hygeinic complete all as specified and directed .

M & L for De-sludging of septic tank of any capacity including connected intercepting chamber, manhole shaft, sludge chamber & filterbeds of any description and in anmy position by pumping out and removing of sludge outside Military/ Defence land by mechanical means (trolly mounted) and burying in pits all as directed including digging of pits in any type of soil and covering pits with earth after filling of sludge and including providing and spearding required qty of bleaching powder or dispose of waste material complete as per state protocol, including taking down of slab cover and placing the same in existing postion complete all as specified and directed .

S & F stack clamp madeout of 50mmx5mm flat iron & 16mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof for 110mm nominal bore pipe complete all as specified and directed.

S & F stack clamp madeout of 50mmx 5mm flat iron & 16mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof for 75 mm nominal bore pipe complete all as specified and directed.

M&L for construction of septic tanks, foundation in PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc., for 25 users including necessary earth work in any type of soil (soft / loose / hard / dense) all as shown on drg No TD-217 sheet 1/7 to 7/7 complete all as specified and directed.

M/S AMAR ELEKTRO CENTRE (BID ID -3064598)

SA construction co. (BID ID -3073060)

Manglam Engineers and Construction Co (BID ID -3064777)